"gx glass"

We installed new washrooms for a new office development in London’s old legal district. The new washrooms feature our Alto toilet cubicles, faced with eco-friendly Bamboo veneer and complete with DDA compliant stainless steel cubicle locks and hardware. Our Concerto integrated duct panels, which were faced with toughened back-painted and acid etched glass for a contemporary matt effect finish, were installed behind the WCs, urinals and around the vanities. Simple wall-mounted sinks feature alongside wall-mounted taps with vanity under panels and splashbacks faced with the same acid etch matt glass effect, complete the minimalistic design.

The specification of a StoVentec Glass cladding solution at London’s new Paddington Elizabeth line station has highlighted the growing popularity of this system for use at transport hubs such as rail stations and airports.

Timber curtain wallsThe use of wood-alum systems and large glass panes allow for the creation of amazing design features that will bring light and the feeling of space to rooms of all shapes and sizes.

The new £65 million, Science, Engineering and Environmental Building (SEE Building) at the University of Salford was designed under the concept of incorporating high sustainability credentials. This supports the university’s pledge in reducing the environmental impact, as part of the wider Salford Crescent and University District masterplan. The SEE building promotes innovation, environmental protection and excellent educational opportunities and offers students state-of-the-art facilities with the aid of the LAMILUX Glass Roof PR60. A stunning skylight measuring an incredible 44 metres long and 9 metres wide, as well as three other Glass Roofs PR60, were installed onto the roof of the four-storey building, illuminating the lecture halls and common areas. This results in enhancing the natural daylight, whilst also allowing for natural ventilation, creating an inspiring environment for learning and development. To avoid overheating and glare inside the building, special 60/30 high performing solar glazing was used. This innovative technology ensures a comfortable indoor climate whilst providing an optimal learning environment.LAMILUX worked with the architect from the early planning stage of the project to design, supply, and install the four rooflights. “Just-on-time” deliveries were planned to enable offloading of the materials, with a crane, from the vehicle to the roof, to minimise loading out as space on site was very limited. Integrated ventilation panels were installed within the three smaller PR60 Glass Rooflights to provide the ideal solution to provide natural ventilation into the building alongside natural daylight.The largest rooflight was glazed with an impressive total of 120 fixed glass panels to make up the impressive 44 metre length and complete the installation. The glass panels were specified with Class 1 Fragility, suitable for walking on for cleaning and maintenance loads, according to CWCT TN 66 /TN 67 & TN92. Before the final handover of the project, extensive water tightness testing was carried out. On site CWCT hose tests were passed successfully, as testament to the quality and durability of the installation led by the LAMILUX installation team. The University of Salford is passionate about sustainability. LAMILUX are proud to be involved with a building project that not only contributes to the progressiveness and commitment to sustainable architecture, but is also considered a BREEAM Excellent-rated facility.

Helmsman supplied the full lockers and cubicle package including, benches, an integrated plumbing system (IPS) and vanity units.Most of the lockers and cubicles manufactured, supplied and delivered were from glass. Glass lockers and cubicles bring a sense of maturity and modern feel to the changing rooms.Moreover, they also requested to have Helmsman's front line cubicles range with a floating leg and hidden fixings for a more aesthetic look.Several different types of benches are fitted in the changing rooms, including island benches, double-sided benches with coat hook bars and, benches fixed wall to the floor. Installation of the project took place in several stages, which depended on the contractors and available floor space.

The Living Planet Centre is WWF’s brand-new purpose-built head office in Woking. Hopkins Architects and Willmott Dixon asked Planet to provide specification for internal glass partitions in this two-storey 3,666 sqm building. For the meeting rooms, Planet Partitioning installed an electronic room booking system within p100 partitioning, so staff can book meeting rooms. For all the meeting rooms, remote controlled integrated venetian blinds allow additional privacy as required. p100 also ensures all meeting rooms meet high acoustic performance requirements. Planet Partitioning also installed FireStop fire-rated glass partitioning to meet fire regulations throughout the building.

VANDALISM to schools’ property is a continuing issue but one that is being addressed by Premier Security & Fire Ltd.Working in partnership with Swedish company Hammerglass, Essex-based Premier is providing security options that include unbreakable glass for windows and doors. Several London schools and colleges that have been repeat victims of vandalism have already engaged the company to replace existing installations.Hammerglass is 300 times stronger than traditional glass and weighs half as much. Premier Security & Fire Ltd manufacture and install their own designs, including security options that reach counter-terrorism threat level.If you would like more information, call us on 0208 559 8295.#UnbreakableGlass #SchoolsSecurity #Facades

ThermGard-R aluminium glazing bars for timber rafters were used to provide a maintenance free and weather-tight glass rooflight to create extra space at this family home in Bethnal Green, London

9,000 m² of solar control glazing with Pilkington Activ Suncool™ 50/25, 2,000 m² enamelled panels with screen printing and 700 m² of curved solar control insulating glass.

Beautiful, spectacular curved glass designs made with evguard®. Luxury Apartments Complex - The Unique Tower - High UV ExposureQuito, EcuadorMixed-use 24-story residential tower in Quito, Ecuador by architect Carlos Zapata. It is located on the northern edge of La Carolina Park and is one of the city’s tallest buildings with the communal pool and lounge area, as well as a series of vertical gardens. The new tower was made to embrace the striking views of the Andes mountains and volcanoes and the surrounding valleys and the busy streets of Quito. The project was designed to be a visually porous structure. This is Zapata’s first project with Quito developer Uribe Schwarzkopf. https://www.dezeen.com/2020/11/24/unique-carlos-zapata-unique-uribe-schwarzkopf/The building features a facade made with glass and aluminum panels, a sculptural envelope that folds to optimise light and privacy within the apartments.The tower was also made to generate the smallest possible impact when it comes to the use of non-renewable resources, such as electrical energy saving, use of potable water, collecting and reusing rainwater, water treatment, and irrigation systems.Amdeksa S.G./Ecuador contributed to its unique design with the spectacular laminated glass design with evguard® UV-380 and evguard® MPE .Ultraviolet (UV) radiation is a part of the solar radiation spectrum, with the wavelength falling between 100 and 400 nm. Since UV radiation has pros and cons based on the field of application, laminated safety glasses at different applications need different UV cut-off to fulfill the requirements. In addition to the evguard® laminating film, Folienwerk Wolfen GmbH also offers evguard® laminating film UV-380 with increased UV cut off to provide higher protection against UV radiation.evguard® laminating film UV-380 is most suitable to minimize the amount of natural UV light to pass through. Even though the standard evguard® laminating film is certified for EN 12543-4, evguard® laminating film UV-380 would be the best choice for some special applications such as to protect the UV sensitive inlays within the glass laminate from discoloration or fading.Photo: Luxury appartments Complex in Quito by Amdeksa S.G. & MM4GLASSFor more information on the project please contact:Amdeksa S.G.Edison Chavez+593 99 832 1083edisonchavez123@yahoo.comContact MM4GLASS for #evguard® in the territories of Central America (except Mexico), South America and Caribbean Islands.Moreno MagonMM4GLASS - Machine Market for Glass +55 11 9 8579 6439moreno.magon@mm4glass.comwww.MM4GLASS.comContact GlassParts for #evguard® in UK & IrelandTony Mallick +44 7392 458390tony@glassparts.co.ukwww.glassparts.co.uk

About the projectIn the summer of 2016, Paterson Gordon Architecture were approached to renovate an existing steading that stood in a derelict state. However, the stunning views of Loch Lomond created an inspiring opportunity to design and build a modern family home.Which FAKRO products were used?This property required an increase of natural light for a dark space within the building which could not fulfil its highest potential. By specifying DMF-D U6 and DXF-D U6 flat roof windows, Paterson Gordon Architecture was able to deliver a substantial proportion of natural light into the central hallway. DMF - D U6 Manually-operated Flat Roof WindowManual opening flat roof windows.The type F window is equipped with an energy-efficient triple-glazed DU6 glazing unit.The external glass is 6mm toughened while the internal glass is laminated and anti-burglary P2A Class.Heat transmittance co-efficient for the whole window is U-Value 0.88W/m²K. (glass U-Value 0.5W/m²K).Acoustic rating 34Db (-1.-3).The multi-chamber UPVC upstand is RAL 9010, the internal finish is RAL 9010 white PVC.The step and profiles are in black 9005, the glazing edge colour, called darkness, effect which comes from RAL 9005 (black) the coating has hue of grey.Can be used on roofs with pitches between 2-15°.DXF-D U6 Non-opening Flat Roof WindowNon-opening flat roof window.The Type F Window is equipped with an energy-efficient triple glazed DU6 glazing unit.The external glass is 6mm toughened while the internal glass is laminated and anti-burglary P2A Class.Heat transmittance co-efficient for the whole window is U-Value 0.88W/m²K. (glass U-Value 0.5W/m²K).Acoustic rating 34Db (-1.-3).The multi-chamber UPVC Upstand is RAL9010, the internal finish is RAL9010 White PVC.The step and profiles are in black 9005, the glazing edge colour, called darkness, effect which comes from RAL 9005 (black) the coating has hue of grey.Can be used on roofs with pitches between 2-15°.The existing part of the barn specified conservation-style roof windows to suit the original roof openings. To meet this requirement, FAKRO conservation windows were specified and installed. The characteristic feature is a black vertical mullion bar down the middle of the window and its black cladding. Making it suitable for traditional construction. Most of FAKROs standard windows are available as a conservation window.Why were FAKRO products specified?Primarily, the appearance of the flat roof windows was behind the reason for choosing FAKRO, along with the diverse product range and the ability to install the windows onto zinc, slate, and single-ply membrane roofs.

Crown Commercial Service (CCS) is the biggest public procurement organisation the UK. At its busy offices in Norwich, Style worked with contractor, Sol Services Ltd, to create flexible space in one of the meeting rooms, enabling staff to configure the area into two smaller rooms or to completely open-up the area into one single space.The partitioning experts at Style designed a system that combines two glass folding partitions with impressive 42dB Rw acoustic ratings, alongside a Stylefold 120 solid folding wall with a 50 dB Rw rating, successfully delivering the level of adaptability demanded by CCS.With over 900 employees spread across four UK offices, CCS uses its commercial expertise to help buyers in central government and across the public and third sectors to purchase everything from locum doctors and laptops to police cars and electricity. The new partitioning moveable walls help ensure there is always the required room space available to accommodate the myriad of meetings that happen each week. “This is a great example of how a combination of solid and glass acoustic folding walls can create flexible meeting room space which offers light and visibility but is also very private,” said Steve Williams, sales director for Style Midlands.“These walls are so effortless and light to manoeuvre that the space can be reconfigured in minutes, which means different room options can be created for different meetings throughout the day.“The glass moveable walls also retain that feeling of having open plan space, whilst the impressive acoustic integrity of these folding walls means that meetings can take place completely undisturbed.”Further adding to the interior design of the room, graphics were added to the solid moveable wall with matching manifestations on the glass.

The project team responsible for a striking residential property in the Channel Islands used our Dualframe 75Si Windows and the Elegance Curtain Walling, supplied by Pallot Glass & Windows, to match the property's modernist styling, as well as providing outstanding weather performance in a very exposed situation. Island-based Pallot Glass & Windows, was awarded the contract by the main contractor, Hacquoil & Cook Ltd, to supply and fit all of the glazing for the two-storey, five-bedroom Jersey home which has earned wide acclaim and been short-listed for several awards. The package included an entrance screen which combined the Elegance 52 elements with a large bespoke timber door and a fully glazed rear elevation with balconies overlooking the gardens.

Long-term fabrication and installation partner A&B Glass, included the market-leading Logik PVC-U window system as an alternative to aluminium frames, to meet developer and homeowner demand at the Beaulieu Park housing scheme.

This unique house was built in Thorpeness, in Suffolk. The whole ground floor walls are made out of glass. This gave Silent Gliss an unique opportunity to help design the new building with its quality blinds and curtain tracks.

Client: RL HarrisonContract value: £50kProducts used:3kN loading rectangular post balustrade with glass infill panels to viewing areas1.5kN loading 48mm diameter stainless steel balustrade to main staircaseWe were appointed to provide more than 90 metres of balustrades and 25 metres of handrails to Burton Rugby Club’s new Battlestead Croft site in Burton-on-Trent. This project involved supplying and installing balustrades and handrails to the viewing areas and main staircase of the new facility – with two important factors to consider: ensuring we stayed within the client’s budget, and selecting the most suitable products to provide an optimum viewing experience for visitors. The initial design drawings showed a vertical bar system along the viewing area, but this was not aesthetically pleasing and would have limited the view of the pitch for wheelchair users. We worked closely with the client to find the correct solution – as structural glass would have exceeded the client’s budget, we chose a balustrade system with 60×30 rectangular posts that are capable of achieving 3kN loading, with clear toughened glass infill panels. We also increased the height of the handrails, both for additional safety and to ensure it would not obscure the view of the pitch for wheelchair users. 

This is the latest cycle hub designed, manufactured, supplied and installed at Salford Royal Hospital in Pendleton, Salford. Based on the flagship FalcoLok design, the 3m x 3m glass clad cycle hub is coupled with Sheffield stands to provide secure accommodation for up to eight bikes.Back In 2020, Falco installed a large hub at Salford Royal to accommodate 20 cycles with FalcoLevel-Premium+ two-tier racks. In May 2022, Falco were asked to visit Turnpike House by the same client to look at installing a secure shelter that wasn’t too imposing in height and size. The shelter was for staff to replace an old tired flat roof structure.To keep the same theme at the two sites, Falco used the same mechanical code lock and 11.5mm toughened laminated heat soaked glass in glass clamps, then customized the graphics to match. The steelwork of the cycle hub was powder coated in the same attractive NHS blue RAL colour.The unit accommodates eight cycles using traditional Sheffield stands and was designed to sit on the same footprint of the old shelter that would only accommodate five cycles.The whole shelter is a bespoke contemporary design of the classic Falco Cycle Hub shelter, which features clean lines through the glass cladding and supported by stainless steel glass clamps. The steelwork is hot dip galvanised to BS EN ISO 1461 and also meets UK structural design laws with EN 1090 accreditation. Rainwater is collected via innovative integral gutters as part of the roof system and a bespoke bund ensure that the cycle hub is weather proof!In addition to the cycle hub shown here for Royal Salford, Falco has also recently installed cycle hubs for many locations across the UK including Fairfield General Hospital, Rochdale Infirmary, Stromness Travel Centre in the Orkney Islands, Crewe, Runcorn, Birmingham International, Warrington Bank Quay and Carlisle station for Avanti West Coast, Bradford Royal Infirmary and St Luke’s Hospital for Bradford Teaching Hospitals NHS Foundation, The Royal Oldham Hospital for Pennine Acute Hospitals NHS Trust, Ninewells Hospital & Medical School in Dundee and a bespoke cycle hub for Leicester City Council.For more information about the project here at Salford Royal or how Falco can assist your cycle parking scheme, please contact our helpful sales team on 01538 380080.

Orbis OS211 Glass Infill Top FixOrbis OS221 Midrail Infill Top FixOrbis OS201 Vertical Bar Infill Top FixOrbis OS251 No Infill Top FixThe £4million campus modifications at Accrington & Rossendale College create a transformational green space to enhance the campus environment. Wildflower meadows are the backdrop to improved access, ensuring ease of movement around campus.A modern and refined aesthetic has been created at the new main entrance with the installation of Orbis balustrades with toughened laminated glass infill. Whilst powder coated Orbis with vertical bars guides the way from the street level access elevator to the main entrance.Incorporating Orbis with midrail infill to provide extra support for the high traffic main entrance steps, ensuring safety is paramount on campus.

A new youth centre's development is underway to the west of Weribee, in the surronding area of Cherry Creek and Dart Valley Systems have provided products from the Safe Ensuite range for the project.The Safe Ensuite range is manufactored from Glass Reinforced Polyester (GRP) which is a single skin configuration that has three different weaves of glass fibre to give the product a good internal sttructural integrity, this is then impregnated with polyester resin to matrix it all together to produce the strong and extrmely durable composite material. GRP is virtually unbreakbale and ideal for high security and correctional facilities. The range of products provided are as follows:·       178 x VR01-010 High Security Ligature Resistant Toilet·       37 x VR01-072 V2 High Security WC Pan Less Abled with Grey Top

What a fantastic example of EB24 steel windows and doors as the main feature for a recent new build project! With character leaded lights used for the front of the property and clear glass at the back to maximise light and views over the landscaped garden.

Project: Northbrook College, West Sussex Client: M&E consultants Scope of project: New canteen and refurbishment of the college’s engineering block Products: em.glaze modular circular glass rooflights, em.glaze shedlights and em.tube tubular skylights

Aluminium glazing channels in a natural anodised finish are used for the glass partitioning in a basement leisure space conversion.These versatile profiles include shuffle-less glazing channels and door pivot kits, offering seamless transitions from partitioning to doors.

At Coverys new headquarters, a stunning array of design elements make this fit-out an undeniable success. Employees work in peace and quiet whenever needed due to the acoustic laminated glass in the Revolution 54 Plus partitions and Edge Affinity doors.

We were happy to work with KKS and ISG on the design and creation of these new spaces. A range of glass partitions for agile working achieved a stunning interior, fit for purpose. Also the design created a BREEAM excellent rating proving it’s sustainability credentials.

StoVentec Glass rainscreen cladding was specified for a new two-storey science block which has been built at Wolverhampton Girl’s High School, following its successful use on the school’s new sixth-form building, completed in 2018.

ASF were approached with a very much open book brief to offer a solution for a church square in Mytholmroyd, West Yorkshire. The area needed a wall top parapet, some glass balustrade, seating and tree grilles.ASF specified a wall top quayside post and rail, but using materials that offered the minimum interference with the view for people using the square whilst still meeting the needs of building regulations and parapet requirements. Uprights were from thinner, laser profiled materials with no T piece to make them as unobtrusive as possible and the rails were intermediately staggered with tension cables for the same reasons. Once installed the whole post and rail system was fully welded together on site to increase rigidity and strength. The job was then fully polished to offer a sublime finish quality.A small area of glass balustrade was installed at one end of the square where ground levels dropped away. A seat was paced in this area to allow people to sit and observe the river and wildlife through the glass.ASF 6012 seats were used all around the site offering seating for up to 36 people at one time.ASF 100% recycled cast iron tree grilles were also installed, and finished in a simple clear lacquer which maintains the gunmetal look of a new casting with just slight areas of oxidisation that are used as a feature of the finish.

Products:OS211 Orbis Glass Infill Top Fix Stainless Steel BalustradeOS251 Orbis Standalone (No Infill) Powder Coated Double Handrail BalustradeContractor: Read ConstructionArchitects: AHR ArchitectsIt was great to work with Read Construction on this new two storey extension to St John Plessington Catholic College. With a total project value of £1.3m, the vision was to create a new state of the art Sixth Form Centre with significant internal renovations prior to the extension to enhance existing spaces.Deltas role in the project consisted of supplying and fitting:68m of our Orbis OS211 Glass infill Balustrade System with Stainless Steel Handrail to the internal atrium and stairs.37m of powder-coated Orbis OS211 Top Fix Glass infill Balustrade Systems to the external retaining wall.27.5m of powder-coated Orbis OS251 no infill balustrade with a double handrails to the external steps and ramps.Aside from balustrading requirements, this education sector project introduced an open plan learning centre, media room, eight new classrooms, and new break out space with a canopy for students. The outcome has exceeded expectations and created an adult-focused learning environment for sixth form students, similar to a university setting, as well as providing more space for the increasing pupil numbers at St John Plessington Sixth Form College.Image credits: Read Construction Holdings Ltd

Solid wood floor specialist Junckers worked closely with world-renowned architects BIG (Bjarne Ingles Group), to create a custom finished oak floor for the M/S Maritime Museum in Helsingør, Denmark. The textured floor acts a link within the interior scheme of the award winning building, bringing together elements of concrete, glass and steel, housed in an amazing 150 metre long, old concrete dock. The architects’ brief was for a solid hardwood floor that can withstand the heavy footfall of a national museum, with a rustic quality to soften the raw and patinated concrete and large glass panels featured throughout the building. Junckers created a textured finish solid oak floor, which gives contrasting warmth to the overall impression of the museum. By using a specially developed hard brushing technique, the outer sapwood layer of the timber is removed, leaving a tactile, textured surface to expose the beautiful grain patterns naturally inherent in oak. The floor is finished in Junckers Ultra Matt Lacquer resulting in a matt, very hard-wearing floor. The lively two-strip oak floors really come into their own in the large, open spaces of the museums galleries. When natural light from the floor to ceiling glass wall hits the surface of the floor at an angle, it creates a spectacular effect. Following the immense success of the project, Junckers has added the incredible textured finish to many of its floors, both two-strip and wide board planks.

The ChallengeThis purpose-built, cutting-edge medical research facility forms part of the Karolinska Institutet and is now one of Europe’s largest laboratories.Home to over 1,600 scientists and support staff and with such a high footfall, the safety of individuals took centre stage in the design and construction of the facility.Additionally, ensuring a design aided world-class medical research was of utmost importance. This meant creating inviting, collaborative meeting spaces which were flooded with natural light, as well as rooms that could achieve the correct acoustic and impact performance requirements to contribute to the accuracy of the laboratory’s critical research.To achieve all of these requirements, specifying the correct materials was crucial to achieving the architectural vision of the building, centered around a spectacular glass atrium that connects the outside with the inside. Pyroguard was approached to deliver a solution that would ensure compliance with safety regulations.The SolutionWith glass playing a crucial part in the building’s design, it provided a practical way of delivering adequate fire protection, making Pyroguard Firesafe ideal for the project.With EW-classification, the solution protects against flames, smoke and radiant heat for between 30 and 120 minutes, while also providing additional radiant heat control to deliver greater fire protection.The structural integrity of the product further ensures it can be handled and installed in the most challenging applications, including Biomedicum’s beautiful glass atrium.

The ChallengeLocated in the city of Nancy, the Centre Prouvé offers a flexible conference space complete with a 3000 m² exhibition hall, two auditoriums, thirteen meeting rooms and a panoramic reception area.With glass playing an integral role in the building design, the architect required a proven smoke control solution that would not distort the aesthetics of the development while adhering to safety regulations. Additionally, due to the high footfall of visitors, the chosen solution would have to be maintenance-free.As a leading fire-glass specialist, Pyroguard was approached by the architect Marc Barani of Atelier Barani to offer a suitable solution.The SolutionTo meet these requirements Pyroguard recommended Smokeguard – a permanent, maintenance-free glazing solution that acts as a smoke barrier, keeping low-level toxic fumes at bay for up to half an hour to give visitors maximum time to exit the building safely.Thanks to its perfect transparency, Smokeguard also met the aesthetic requirements with the 8 mm thick tempered monolithic glass offering 87 percent light transmission, to provide the perfect transparent protective barrier with minimal visual impact.As a result, over 100 m² of Smokeguard was installed in the atrium, escalators, and lift areas utilising its patented fastening system to mount the system to the ceiling areas.Click here for further information on Smokeguard or for further advice and support please contact us.

The ChallengeWith the architects hoping to realise their vision of space and light on the ground floor, but the fire officer demanding fire safety partitioning around the base of the lift shafts, Pyroguard tendered a stylish, high-performance solution – a lobby encased in glass and steel, capable of delivering best-in-class performance credentials and aesthetic appeal in abundance.Working closely with steel frame and glazing specialist Pacific Fire Control, Pyroguard designed a modern glass wall, with a glazed door and stylish, thin steel frames which were independently fire tested by Efectis France.The scheme amendment was accepted by both the architects and the fire officers, declaring Pyroguard as their manufacturer of choice for this flagship leisure development.The SolutionA subsidiary of India’s largest business conglomerate, the Tata Group, the Indian Hotels Company is known for its relentlessly high standards, which are visible across its portfolio of hotels.Meeting this quality benchmark head-on, Pyroguard supplied 390 square metres of ultra-thin lightweight Pyroguard Firesafe, which offers protection from flames, smoke and radiant heat for between 30 and 120 minutes.This EW-classified product is UV stable and offers exceptional light transmission, making it the perfect solution for encasing the lift lobby. The toughened glass was installed in fire-resistant steel screens and door frames around the lobby.

At the new head office of award-winning manufacturer, Sandon Global, Style worked with contractor, H Cumberbirch, and architects, 2M2 Studio, to create flexible space by installing two Dorma Hüppe Variflex moveable walls with 46dB acoustic ratings. With both walls benefiting from semi-automatic operation, the acoustic seals are always applied to exactly the right pressure, delivering exceptional privacy during meetings and events. Creating a contemporary yet highly functional feature of the walls, a combination of acoustic absorbing fabric and writeable glass was used as finishes.Style is the exclusive UK partner to Dorma Hüppe offering a complete range of solid and glass moveable walls with manual, semi-automatic and fully automatic operation.“This is a really stylish head office for Sandon Global, and the Variflex moveable walls not only offer adaptable room space, but they also complement the interior design perfectly,” said Andy Gibson, Style’s director for the North.“The 46dB acoustics on both operable walls ensure that meetings, training sessions, workshops and other events can take place undisturbed. By incorporating a pass door between the board room and seminar area, the wall can be left in place without access issues, only opening up the whole area for occasional large-scale events. In contrast, the meeting room wall is likely to be used most days, depending on numbers.”Between the boardroom and the amphitheatre-style seminar room, writable white glass was applied on the seminar side, with a Creation Bauman Astra Fabric acoustic absorption surface in the boardroom.The moveable wall between the meeting rooms has a mix of the same acoustic absorbing fabric and writeable white glass on both sides – perfect for hosting brainstorm sessions and workshops.Sandon Global manufactures anilox rolls and cylinders used in the flexographic, lithographic and metal decoration print industries, worldwide. The new, purpose-built headquarters in Runcorn, Cheshire, provides additional capacity as well as a state-of-the art research and development function.

This is the latest cycle hub designed, manufactured, supplied and installed at the new Salford Royal Greater Manchester Major Trauma Hospital, located at the heart of the Salford Royal Pendleton site.Based on the flagship FalcoLok design, the 5m x 4m glass clad cycle hub is coupled with the FalcoLevel-Eco two-tier cycle parking system, providing secure parking for up to twenty bikes.Back In 2020, Falco installed a large hub at Salford Royal to accommodate 20 cycles with FalcoLevel-Premium+ two-tier racks. In May 2022, Falco were asked to visit Turnpike House by the same client to look at installing a secure shelter that wasn’t too imposing in height and size. The shelter was for staff to replace an old tired flat roof structure. In September last year, the hospital required a further 3m x 3m cycle hub to cope with increasing demand for secure cycle parking. The cycle hub shown here is the fourth to be commissioned by the hospital and to keep the same theme as the previous three sites, Falco used the same mechanical code lock and 11.5mm toughened laminated heat soaked glass in glass clamps, then customized the graphics to match, providing a coherent series of cycle parking across the Salford Royal site. The steelwork of the cycle hub was powder coated in the same attractive NHS blue RAL colour.The whole shelter is a bespoke contemporary design of the classic FalcoHub shelter, which features clean lines through the glass cladding and supported by stainless steel glass clamps. The steelwork is hot dip galvanised to BS EN ISO 1461 and also meets UK structural design laws with EN 1090 accreditation. Rainwater is collected via innovative integral gutters as part of the roof system and a bespoke bund ensure that the cycle hub is weather proof!In addition to the cycle hub shown here for Royal Salford, Falco has also recently installed cycle hubs for many locations across the UK including Fairfield General Hospital, Rochdale Infirmary, Stromness Travel Centre in the Orkney Islands, Crewe, Runcorn, Birmingham International, Warrington Bank Quay and Carlisle station for Avanti West Coast, Bradford Royal Infirmary and St Luke’s Hospital for Bradford Teaching Hospitals NHS Foundation, The Royal Oldham Hospital for Pennine Acute Hospitals NHS Trust, Ninewells Hospital & Medical School in Dundee and a bespoke cycle hub for Leicester City Council.For more information about the project here at Salford Royal or how Falco can assist your cycle parking scheme, please contact our helpful sales team on 01538 380080.

Glazing Vision’s three-wall box rooflight has provided a rooftop with more de rigueur, and one which takes advantage of the spectacular views overlooking the Perth shorelines.Keen to unlock and utilise the space on top of this newly built residential home, and further add value to this property, an innovative “glass box” was introduced to provide easy access to the roof terrace.Luxurious, modern and upbeat, this new build property has been carefully created with family life in mind. The floor plan involves family separation and considered zoning of the property.The ground floor provides a secluded escape from the excitement of the first floor, with a detailed layout which enables the clients to relax. A big theatre room and access to the garden offers a chilled out environment, hidden away from neighbours.The first floor is created for living in, with a completely open planned lounge, diner and kitchen. Set higher up, it allows for views across the beach and over the garden courtyard. Thus, it was important to ensure that high quality glazing was specified throughout to make the most of the wonderful views.Tasked with sourcing and installing the windows and doors on this modern new build property, Next Generation Glass director Steve Payne mentions how the client had come to them enquiring about skylights. After a lot of research into the different profiles available in Australia and after various different drawings and ideas, the outcome wasn’t looking good.It was a visit to the UK which led Steve to Glazing Vision, thankful of a recommendation from a contact of his. “Since my first contact, we decided it was a great product and became a distributor of Glazing Vision products in Australia”.After discussing the details of the job, a three wall box rooflight was recommended, helping to provide access to the clients roof terrace and providing wonderful views of the majestic presence of the Indian Ocean in the background.“It really is a great product and all that see it are in awe of it” explains Steve Payne, director of Next Generation Glass.The Glazing Vision three-wall box rooflight is fixed to your existing building structure, thereby facilitating the full use of the roof top terrace but operates in the same way as our freestanding box rooflight. The sleek aluminium framework and perfectly edged glass-to-glass joints create a stunning contemporary finished design which reflects the style of this property.This home’s rooftop terrace is the culmination of meticulous tweaking of the planning codes, and the reward is breath-taking views of Perth, with a beautiful backdrop of the ocean behind. It was in fact these planning codes which guided them towards the three-wall box rooflight, as the extra head height was required when coming up the stairs. Also allowing the homeowner to climb the stairwell whilst the rooflight is retracting into its open position, without having to ‘bow their head’.Fitted with minimal and contemporary outdoor furniture to increase the sense of openness. The new roof top allows the homeowner an additional ‘room with a view’, perfect for entertaining or for relaxing and enjoying the stunning views on offer.Having completed their first project with Glazing Vision, Steve Payne mentions how easy the whole process was, and that most of the hard work was undertaken by Glazing Vision. It was a simple installation process for a company like Next Generation Glass who are used to cranes in their scope of works.

Project: Slimming World headquartersClient: Slimming WorldMain contractor: Morgan Sindall ConstructionArchitect: CPMGWith its newly extended headquarters in Alfreton, Derbyshire, weight-loss organisation Slimming World wanted to create a landmark building for the brand that would both provide an ideal working and training space for its people and deliver excellent environmental performance.Glazing plays a key role in the £8.5 million scheme, both aesthetically and in terms of its use of energy.At the heart of the building is a large atrium with a full-height glass front elevation and a glazed roof running right to the back of the space. Meanwhile, one of the wings connected by the lobby area features large ‘picture windows’ that deliver views over the facility’s attractive, leafy grounds.High-performance envelopeBecause much of the building’s envelope is glazed, the designers faced the challenge of avoiding the need for an energy-intensive climate-control system to create a comfortable environment for users all-year-round.Lee Shaw, Business Development Manager at Pilkington United Kingdom, explained: “The twin challenges any building with extensive glazing faces are loss of heat on cold days and excessive heating as result of direct sunlight when the weather is warmer.“The combination of products we have supplied to this project use advanced coatings cleverly to minimise these two effects, helping to smooth out the peaks and troughs that can lead to uncomfortable temperatures, expensive heating and air-conditioning bills and wasted energy.”The curtain walling system uses double-glazed units manufactured by Pilkington, incorporating Pilkington Suncool™ 60/31 T solar-control glass and Pilkington Optitherm™ S1 Plus, a low-emissivity product.The solar-control glass features a state-of-the-art coating that transmits only 31 per cent of the sun’s energy, while still allowing for 60 per cent light transmittance, so that occupants still get a clear view outward.The low-emissivity glass meanwhile features a coating that reduces outward radiation of heat, so that less is allowed to leave the building on colder days.Uninterrupted viewsThe same glass is used in the atrium wall and roof but is held in place using the latest structurally glazed units from Schueco. These deliver glazed surfaces with ultra-low-profile frames to minimise interruption of views from the building, as well as daylight flowing into it.Extra strength is added to the atrium glazing by including a layer of laminated glass on the inner pane, to help the large units stand up to forces exerted on them by the wind and potentially the weight of snow during the winter.Lee Shaw continued: “This project demonstrates the range of glazing solutions we are able to offer, with a combination of curtain walling, structural glazing and roof glass, all of which has been manufactured in the UK.“The architect has used timber slats to deliver some degree of solar shading, but the extensive area of glazing enclosing the space means there would still be significant risk of excessive heat build-up. The glazing specified minimises this effect, saving energy and money while also delivering a more comfortable and stable year-round climate for those using the building.“This is also one of the first projects to feature Pilkington Suncool™ 60/31 Pro T glass, which is now fully manufactured in the UK, following recent re-location of production from Germany. It’s great that we’ve been able to combine a made-in-Britain success story with a new chapter for a well-loved British business.”The completion of the building is the latest chapter in the story of Slimming World, which started when founder Margaret Miles-Bramwell OBE, then 21 years old, first began holding Slimming World groups in Alfreton in 1969. Now, 50 years later, there are 19,000 local groups across the UK and Ireland, run by a network of more than 5,500 self-employed Consultants.The new headquarters includes extensive training facilities, meeting and office spaces, as well as a brand new 550-seater restaurant for staff, guests and Consultants visiting for training.Paul James, Slimming World’s Facilities Manager, says: “People have always been at the heart of Slimming World’s success and so ensuring that our people – our head office staff and Consultants – have the facilities and environment they need to do the best job possible has been a real priority for us. The new building will ensure we have the facilities we need to train and support all of our fantastic Consultants who deliver exceptional service to our members to support them to lose weight and live healthier, happier lives.“Having large expanses of glass has provided us with a beautiful, light-filled space that will be comfortable and inviting for everyone who uses the building right through the year.”

This straight feature stair and glass bridge is located in a spacious office in the heart of London. The mild steel structure accentuated the urban feel of this commercial space. The laser cut risers came complete with brass nosing inserts for a contemporary appearance and completed with a wax finish.