"ceiling finishes"

Established in Eastbourne over 130 years ago, W.Bruford is proud of its reputation for exceptional service, exclusive choice and attention to detail. They are recognised as a prestigious jewellers and pride themselves in offering the highest quality products and services. We wanted to do their brand justice by working closely with them to make their vision for their entrance come to light.Project Year: 2019Product: ASSA ABLOY SL500 Transparent Sliding DoorProject Background: Having worked with Innovare Design on their shopfront redesign, the client approached us to request a bi-parting all glass automatic door with side screens and pocket screens, and for the operator to sit above the ceiling and be the closest match to the bronze finish on their sign. As a high end jewellery store, both security and a clean and sleek look, were priorities for the entrance.Solution:FAAC Entrance Solutions installed the SL500 Transparent sliding door four panel system and finished the operator cover in a 50% gloss Light Bronze RAL Finish. The pocket screens were replaced by flush mounted EN16005 compliant safety presence detecting sensors which together with the 10.8mm glass and a dotted manifestation, contributed to an elegant yet safe entrance. We integrated mechanical bolt floor locks, and first-entry switch and last-exit push buttons for the use of staff. For more information or assistance with any project, please contact enquiries.esuk@faactechnologies.com where we can provide expert guidance and detailed documentation.

Hinchley Wood School in Esher, Surrey is a mixed comprehensive academy, providing education for 11-18-year olds. They tasked Hush with a project to improve acoustic comfort in their sports hall following the success of a previous project to install Hush Absorber Panels within their canteen in 2016.Mike Robeson, Director of Finance and resources at the school, contacted us regarding their purpose-built Sports Hall in which they were experiencing severe reverberation issues. The Sports Hall has been in use for many years to carry out PE lessons and other sporting activities, along with being used as an Examination Hall.When being used for exams, the school were having to temporarily lay a carpet on the floor to dampen the sounds within the hall, hoping to create a calming and relaxing atmosphere with minimal echoes. However, this was unsatisfactory, and they sought an effective long term solution.When conducted a site visit which enabled us to measure the Sports Hall to be 8.5m in height, 27m in length and 18 m wide. The ceiling area features metal trunking around it and measures 486 sq. m in total. We calculated that 230.4 sq. m would need to be acoustically treated.In order to effectively treat the reverberation issues within the area, we specified 192x 50mm Hush Absorber panels to make the hall acoustically fit for purpose and they would need to be directly bonded to the metal deck.The panels that we supplied the school were from our new Polysorb range, in which the product itself is made from polyester as opposed to foam, giving equally excellent acoustic results. We also supplied these panels with a hard face material, to be damage protected from any equipment which may make its way up to the ceiling.The Polysorb panels are manufactured from 100% recyclable Polyester, in which a minimum of 45% is from post consumer waste PET (Plastic Bottles). The panels have been designed for exceptional sound absorption qualities, whilst being light-weight, impact resistant and durable. These panels can also be cut to any required size and finished in your chosen design.We allowed 5 working days to be able to fit the panels and were able to finish within 4. Whilst installing them, we also rescued 12 footballs and a whole host of shuttlecocks from the ceiling area!We are pleased to have been able to help the school with their reverberation issues and to make a positive impact on the pupils learning, as well as making for a more appropriate and less noisy exam hall.

The Cube in Birmingham city centre is home to The Marco Pierre White Steakhouse Bar & Grill which offers it’s customers an ultra modern 25th floor dining experience. Beplas played their part by supplying contemporary colours from their Elite Komadur PVC Sheets which still provide the ultimate in food hygiene for the kitchen. Beplas’s ethos of sensible prices goes hand in hand with the group’s affordable luxury.

Hunter Douglas launches new HeartFelt Multi-panel system

Lambeth Town Hall, a Grade II listed building designed by the well-known architects Septimus Warwick and Austen Hall, was opened on 29 April 1908 by the then Prince and Princess of Wales, subsequently King George V and Queen Mary and is a fine example of the Edwardian Baroque style of civic architecture.The remit for the New Town Hall was to provide a more peaceful working environment where council workers were not disturbed by noise levels and reverberation issues. As an example, where poor sound absorption and poor reverberation control is not resolved, staff members often experience problems with concentration, fatigue and headaches so practical work is always disturbed instead of being a pleasant working space.Soundis supplied and installed a Monolithic Absorb-R GypLine αw to the existing soffits and ceilings to create a Semi-Textured Finish to soffits and a Semi-Smooth Finish to public spaces and council meeting rooms.Morgan Sindall have monitored progress with pre-completion quality results and on site satisfaction reports which indicate that exceeded the expectations of all involved with this project. Morgan Sindall also highlighted and rewarded Soundis for Health & safety performance throughout the contract.

Skyfold has launched a pioneering, fully automatic, moveable wall solution into the UK.The Skyfold Prisma, which is exclusively available from leading moveable wall specialists, Style, is a new and streamlined glass vertical partition which not only allows light to shine in but does so without the use of any wall or floor tracks, rendering it completely invisible when stored in the ceiling.“This is a real breakthrough in moveable wall technology from our global manufacturing partners, Skyfold,” said Style’s group managing director, Julian Sargent.“As a fully automated, acoustic glazed moveable wall that stacks into a ceiling cavity, its slim metal frame, clean lines, and sleek design will add elegance and an abundance of light to a wide range of rooms. We see demand being very strong in the corporate, hospitality, education, healthcare, religious and public sectors.”Skyfold Prisma's glass panels combine with a minimalist frame to allow light penetration into otherwise dark rooms and corridors, creating an open plan feel to any area, positively impacting both mood and productivity.With an impressive 52 Rw dB acoustic rating, Prisma also delivers privacy between divided spaces, allowing confidential meetings, classes, and collaborations to occur simultaneously. With space always at a premium, the panels of this innovative new partitioning wall cleverly ‘taper’ down into position, making it suitable for restricted areas or where there is potential for obstructions. Further maximising space, when not required, the partition can be quickly retracted into the ceiling cavity where it is neatly stored, completely out of sight. Skyfold has announced that Prisma is available in a variety of materials including glass, frosted glass and solid panels, with almost any combination being possible. Solid elements can be finished in fabric, vinyl, paint, laminate or even marker-board, allowing a true showcase feature to be created that is both superbly aesthetic as well as highly functional.

Skyfold has launched a pioneering, fully automatic, moveable wall solution into the UK.The Skyfold Prisma, which is exclusively available from leading moveable wall specialists, Style, is a new and streamlined glass vertical partition which not only allows light to shine in but does so without the use of any wall or floor tracks, rendering it completely invisible when stored in the ceiling.“This is a real breakthrough in moveable wall technology from our global manufacturing partners, Skyfold,” said Style’s group managing director, Julian Sargent.“As a fully automated, acoustic glazed moveable wall that stacks into a ceiling cavity, its slim metal frame, clean lines, and sleek design will add elegance and an abundance of light to a wide range of rooms. We see demand being very strong in the corporate, hospitality, education, healthcare, religious and public sectors.”Skyfold Prisma's glass panels combine with a minimalist frame to allow light penetration into otherwise dark rooms and corridors, creating an open plan feel to any area, positively impacting both mood and productivity.With an impressive 52 Rw dB acoustic rating, Prisma also delivers privacy between divided spaces, allowing confidential meetings, classes, and collaborations to occur simultaneously. With space always at a premium, the panels of this innovative new partitioning wall cleverly ‘taper’ down into position, making it suitable for restricted areas or where there is potential for obstructions. Further maximising space, when not required, the partition can be quickly retracted into the ceiling cavity where it is neatly stored, completely out of sight. Skyfold has announced that Prisma is available in a variety of materials including glass, frosted glass and solid panels, with almost any combination being possible. Solid elements can be finished in fabric, vinyl, paint, laminate or even marker-board, allowing a true showcase feature to be created that is both superbly aesthetic as well as highly functional.

Dual finish made-to-order double glazed timber flush casements and doors were used to totally transform this previously tired property into a vibrant, exciting and modern family home. Dual finish wooden flush casement windows and doors. Knot free engineered timber. Fully weather-stripped, internally glazed and with espagnolette locking. All tested to meet Part Q of the Building Regulations for Security. 22 High performance flush casement windows. 4 High performance made-to-order timber French doors. 2 sliding, folding bi-fold door sets.

Reckitt’s unrivalled range provides health, hygiene and nutrition for people in 200 countries around the world, and at its offices in Slough, Berkshire Style worked with architects, Tetris Design & Build and contractor, BW Interiors, to create flexible space throughout the building.What made this installation particularly notable for Style was that it was the company’s 300th installation of a Skyfold – the market leading, fully automatic, vertically rising, acoustic moveable wall.Installing Skyfolds in both the main boardroom/meeting room and also in the lounge and shop/display area, the moveable walls offer incredible 59dB acoustic ratings and are housed, out of sight, in a ceiling cavity when not in use.“When we introduced Skyfold into the UK market 15 years ago, it was a completely new, ground-breaking moveable wall solution,” said Julian Sargent, Style’s group managing director.“At the push of a button it descends gracefully from a ceiling cavity, and once in place it offers superb room separation with top end acoustic integrity.“Initially it took time to raise the profile of Skyfold with architects, contractors and potential end-user clients, however once the benefits of this operable wall became recognised the numbers of specifications grew rapidly, as it is a truly outstanding form of room separation.”At Reckitt, the Skyfolds enable staff to very quickly divide the rooms, and when not in use they take up no floor space whatsoever and are completely out of sight.Finished in a stylish Kvadrat Steelcut Trio fabric, they also complement the interior design of the building creating a real showcase for anyone visiting the offices.In addition to the Skyfolds, Style was also specified to install a Dorma Huppe Variflex semi-automatic moveable wall in a ground floor studio, also with a 59dB acoustic rating and in an Egger laminate finish.Style is the UK market leader in moveable, partitioning and folding walls and the exclusive UK partner to Skyfold, Dorma Huppe and SWG.

The Project Joseph Leckie Academy £3.5 million modern new wing received Walsall Council’s planning committee approval in April 2015, and it has been full steam ahead since then. Speller Metcalfe awarded contractor and commenced building the state of the art 21 classroom block in May 2015. The ChallengeThe Architects vision was to create a minimalist washroom décor with flush frontage cubicles and high specification wash stations.The overall finish to be non-fussy and unobtrusive.Cubicles sited below a bulkhead were required to appear to float and all legs and fixing to be hidden.Standard vanity frontages and sinks did not meet the brief, a bespoke wash station was required. The Solution Excelsior Planar 12mm Solid Grade Laminate has proven an excellent choice for the building, the flush frontage provides a seamless finish, and the durability of solid grade laminate panels is perfect for a heavy use environment such as a school. Finished with a ‘P’ section headrail for maximum stability, eradicating any lateral movement provided the rigidity the system needs.The overall aesthetics of the installation is extremely pleasing, the cubicles overall height @ 2100mm on a 50mm leg is a standard height system however having a bulkhead in place has increased the sense of privacy and delivered the opulence of a floor to ceiling enclosure. The 50mm leg is set back inside the cubicle, fixed onto the partition which enhances the seamless finish from the exterior and infers the system is floating.SpecificationProduct Range: Planar 12mm Solid Grade Laminate CubicleDoors: B070 Blanc Megeve )Pilaster: Gris Orage G059Partition: Gris Orage G059Ironmongery: Stainless Steel

The designers for the new offices in Atherstone, Warwickshire focused on creating a building that would be in tune both with its rural surroundings and also with the inventive and artistic profession of the occupants. The premises are the headquarters and design studio for a well known video game development company.The design of the building is based on a large barn with attractive contemporary wooden panelling and external posts and beams. Running alongside these posts and beams is dramatic bespoke aerofoil solar shading and weather louvres.As a perfect colourful contrast for offsetting the wood, ‘Copper Mine’ - gives the effect of patinated copper or Verdigris. The project comprises of 475 linear metres of 170mm elliptical aerofoil blades.The final effect of the blue/green aerofoil fins set against the wood is stunning as the images show. ‘Copper Mine’ is a textured finish and will give a pleasing variation in shade as sunlight moves across its surface

Universal Music Group – 4 Pancras Square, London
Architect: Aros
Installer: BOK Construction Ltd
Product:  Durlum PolylamIn the summer of 2018 Universal Music Group joins the likes of Google and Louis Vuitton inside the commercial floors of Eric Parry Architects’ Pancras Square 9 building development in Kings Cross, London. UMG’s 1,000 strong workforce occupy the entirety of the buildings 10 floors and 174,570 sq ft of floorspace.LSA Projects Ltd supplied 1,532 Durlum Polylam baffles (roughly 1000m2) to the project in 4 different lengths and custom timber effect finishes: natural oak, light stained oak, medium stained oak, and light grey stained oak. The baffles are installed independently at varying pitches and offset linear spacings to encourage visual flow through the space and elegant incorporation of linear lighting.By using metal baffles rather than a solid or wrapped timber product the architect and client were able to achieve the effect of a linear timber ceiling on a more dramatic scale than would be possible with natural wood. The baffles are also finished with micro perforations to the vertical sides and are filled with mineral wool for additional acoustic control.

The outstanding qualities of Sandtex Trade High Build Textured Decorative Coating deliver a long-term solution for the protection of buildings, capable of ironing out surface level imperfections at a stroke. Ideal for covering fine cracks and regulating repaired and uneven surfaces, this advanced masonry product offers exceptional coverage and flexibility, providing both a decorative and protective textured coating with the reassurance of 15 years’ durability, independently certified by the British Board of Agrément. Along with a long-lasting finish, the paint is formulated to maintain its good looks with anti-carbonation properties which protect concrete and metal from atmospheric erosion.

Gregg’s has an eye-catching livery with its logo of large white lettering, four orange coloured blocks and the sky blue background The façade was updated with 2mm aluminium cassette panelling coated in Evolution ‘Peat Fire’. This shade is similar to Corten but there is no run-off or staining of surrounding material. The panelling has feature perforations which create an interesting effect, enhanced by the consistent inconsistency of the weathered steel appearance of the coating. The façade will look smart for years with a guarantee of up to 25 years for gloss, colour and adhesion.

The former Royal Military Academy overlooking Woolwich Common finds a new place in history with its stunning restoration, featuring Kingspan OPTIM-R Flooring System. The vacuum insulation panel system was chosen to most of the available space. The original beam and block flooring limited the ability to dig down, so installing the Kingspan OPTIM-R Flooring System in a 30mm thickness allowed for the maintenance of the existing threshold levels whilst also achieving excellent thermal performance.

Moonraker is a luxury residential property drawing on the exploits of James Bond for inspiration. Bournemouth-based Seven Developments’ four-bedroom property, which includes a sunken garden with decked footbridge, is a cocktail of curves based on the shape of a crescent moon.

The oldest street in Coventry features a newly built housing development that remains in keeping with the area’s historic background, thanks to the installation of Cembrit’s Jutland fibre cement slates. Far Gosford Street is setting of many historic stories. Now, it features a new gated community, comprising 30 three and four bedroom mews style houses. Kilby Mews forms part of a wider multi million pound private and public sector regeneration project to develop Far Gosford Street.

Project Overview: Re-imagination of a first-generation Canary Wharf building. ServiceFull hardware scheduling service. Project Details This clever redesign of YY London by Architects Buckley Gray Yeoman (BGY) centres around the wellbeing of its occupants created by maximising natural light, reducing overall energy demand and choosing materials that support health and well being. The space was reimagined to incorporate a new triple height lobby with feature staircase, floor to ceiling glazing throughout to maximise natural light and the addition of outside terraces on most floors.3v worked in partnership with BGY to develop the perfect Ironmongery scheme to enhance their design aspirations. Scheduled in the aftermath of Covid, the scheme included a full hardware scheduling service incorporating the use of a biocote anti bacterial finish in high traffic areas on all tangible stainless steel products such as pull handles and push plates. ‘Chris and the 3v team were a pleasure to work with and proactive in helping us adapt the ironmongery package in response to the pandemic. We’re really pleased how seamlessly the ironmongery has been integrated into the joinery finishes and look forward to continuing our collaboration on future projects.’Adam Whitlock Wood, BGYOur ironmongery is often the first physical product visitors interact with in their journey through a space, it is important that it looks good, feels right and functions correctly to fulfil the user experience and the architects design intent. Our simple 250 and 234 pull handles add an elegant finishing touch to this inspiring and vibrant space.An outstanding project to be involved with.Photography: Neil Kenyon

Established in 2017, Steps Together Group is a collection of private addiction treatment services, providing a winning combination of residential and outpatient addiction treatment & therapy services for individuals, their families, and their employers.This latest addition to their portfolio is Rainford Hall near St. Helens, the former home of the Pilkington Family.The property was completely refurbished with a a sympathetic approach that conserved the best of the house and original features but with modern, luxurious comfort levels.

A.J Wells manufactured and installed over 600 square metres of vitreous enamel cladding panels for the fourth floor of world renowned department store Harrods.The Knightsbridge store unveiled the new section in November 2013 as part of a £200m makeover. In a radical overhaul the Way In fashion section was converted into a 30,000 square foot “Fashion Lab” with cast concrete floors, crackle-glazed wall panels, steel columns and a metal grid ceiling system. The department houses an array of contemporary brands aimed at the younger market.Working with Found Associates, A.J Wells designed and manufactured the wall panels and the framing system. Vitreous enamel was specified for its durability, low maintenance and luxurious surface finish. A unique satin enamel finish was used with a subtle crackle glaze effect. The panels wrapped the walls of the store and formed counters and cash desk bulkheads. The cladding also extended into a café area within the store.The cutting edge scheme, designed by Found Associates, was deliberately minimal with uniform fixtures and fittings and plain enamel walls to counter the confusion often associated with concessions within department stores.KEY FEATURES:• Satin crackle glaze vitreous enamel• Wall cladding• Counter frontage and bulkheadsA.J WELLS SERVICES:• Design & development• Manufacture• Framing• Project management• Installation

The popularity for limewash or Venetian plaster aesthetics is increasing, but as watered-down acrylic paint mixed with bicarbonate of soda isn’t vapour permeable and can contain solvents, we’ve developed KEIM Colourwash – an interior mineral paint to replicate historic finishes which is non-caustic in composition and non-chalky in finish.In addition to the high quality associated with KEIM Mineral Paints, KEIM Colourwash is #likelimewashbutbetter, uses UV stable pigment and supplied ready for use, making it ideal to apply onto both bare and previously painted walls and ceilings.Following the launch of KEIM Colourwash in April 2023, we’ve been searching for collaboration projects to showcase the easiest way to achieve a limewash aesthetic without the hassle of limewash.Nathalie Mackinnon (AKA Nat the Painter), already experienced with the application of KEIM Mineral Paints for projects including St Andrew’s by the Wardrobe, put forward KEIM Colourwash for Waterloo wine bar, Café Del Marsh.Soft and cosy Colourwash KNIT was chosen to compliment the Parisian-influenced interior of the contemporary café and live music venue, paired with Farrow & Ball Wimborne White for the wooden panelling. Sol-silicate Colourwash BASE is suitable for direct application onto previously painted surfaces and creates the perfect opaque white base to create depth to Colourwash shades.“I can’t believe the coverage of Colourwash, it goes on like a dream. I can’t speak highly enough of the product and finish. It actually looks fantastic.”Nathalie rocketed through the paint application (you can follow the Café del Marsh decoration journey on Instagram: @natthepainter or @keimcolourwash), applying a single coat of Colourwash BASE followed by one coat of Colourwash KNIT with 12 hours between coats. Nathalie commented “I love the finish. Colourwash goes on like a dream”.

Churchill Square, a bustling shopping hub in Brighton, underwent a significant transformation in 2022, closing its main customer toilet area for a multi-million pound renovation. The refurbishment included not only updating the main toilet facilities but also adding accessible WCs, mother & baby areas, a prayer room, and a Changing Places toilet. Graham Construction, the main contractor, enlisted our assistance for the Changing Places toilet installation. Addressing layout challenges during the initial site visit, we collaborated with the Graham design team to ensure compliance. Our detailed drawings and management through the Trimble Construction One™ portal streamlined the construction process. The installation featured a GoLift ceiling hoist, a thermostatic shower, a Premium 200 shower bench, a height-adjustable basin, and a wall-mounted privacy screen. We provided training for key staff, facilitated the Changing Places registration, and achieved a fantastic finish on this noteworthy project.

PROJECT OVERVIEWWorking with BES, we have successfully completed a refurbishment of an existing space into new quality assurance (QA) laboratory for a pharmaceutical blue-chip client. The fundamental requirement was to deliver a purpose- designed laboratory, located at the heart of the client’s busy manufacturing site, to run robust microbiological analytical activities for the next 25 years.SCOPE OF WORKTo meet the project requirements, we utilised several products, including 100mm Mediline partitions, metal pan ceilings, walk-on ceilings and various types of doors. Our in-house team became involved at an early stage of the design process. Working closely with the main contractor and end-users, we were able to recommend different products which would benefit the client’s processes and flow of the building. One of the key solutions we offered was Norwood’s automatic hermetically sealing sliding door system with large vision panels. This specifically designed doors not only saved space but also provided users with an open feel of the facility. It is due to this project that Norwood became a member of the Automatic Door Suppliers Association – (ADSA). Not many companies hold an ADSA membership and being associated with ADSA promotes the highest standards in automatic doors and gives Norwood operatives the qualification for certifying their own automatic doors to BS 7036: 1988. We delivered a modern and energy efficient facility, compliant with Good Laboratory Practice (GLP) requirements, within a controlled budget. The laboratory was finished to the highest standards, with a great attention to detail throughout.This project demonstrates that by involving Norwood at the early design stages, we can add real value, advising on the most suitable solutions, tailored to the specific needs of our clients.

Rockfon® Lamella has been awarded Product Innovation of the Year in the Furniture, Fixtures and Equipment category of the FIS Innovation Awards 2023. The modular wall system provides Class A sound absorption for commercial projects and boasts a unique range of wood veneers in different colours and dimensions, allowing for an impressive 650,000 design combinations.Nigel Watkins, Commercial Sales Director for Rockfon, expressed his excitement about the recognition, saying, "We are thrilled that Rockfon Lamella has won this award only a few weeks after its launch." Rockfon Lamella's development was based on effective collaboration, knowledge transfer, and partnership along the project team, satisfying two initial criteria for Rockfon innovation: modularity and customisability, and occupiers' well-being through the use of colour, biophilic-inspired design, and natural surfaces.Combining the warmth and beauty of wood with a stone wool sound-absorbent panel, Rockfon Lamella creates a serene and inviting environment inspired by the biophilic design trend. Customers have expressed their satisfaction with the combination of these elements, with Nigel Watkins sharing that "The feedback we’ve had from customers is that the combination of a stone wool sound absorbent panel with biophilic wood makes interiors feel calm and connected to nature."Joe Cilia , Technical Director of FIS who was one of the Innovation Award judges, was impressed that Rockfon Lamella has such comprehensive test data, covering the whole system, not just individual components. “The furniture, fixtures and equipment (FFE) sector suffers from a lack of standardised testing and compliance for acoustic and fire performance, leading to clients choosing products that don’t perform as well as they should. The judges were impressed that Rockfon Lamella has clear, transparent test data that shows how the whole system performs.”Rockfon Lamella sets itself apart from other acoustic fixtures and fittings by offering exceptional fire performance classification of c-S2,d0, in line with EN 13501 standards, and Class A sound absorption that adheres to ISO 11654 regulations. Additionally, accessing all the necessary specification data, BIM Objects, and CAD drawings on NBS Chorus, NBS Source, and pCON is quick and easy, making the specification process quick and effortless.Rockfon Lamella simplifies installation by providing a complete kit that includes all necessary components. In-house facilities teams can easily follow the straightforward installation process, thanks to specially designed mounting clips. As Teemu Rekonen, Head of Design & Innovation at Rockfon, highlights: "This advanced product... enables individual placement of the slats to create the perfect acoustic environment. Once the platform is in place, installing Lamella slats is a quick and hassle-free process that requires no tools".Visit www.soundsbeautiful.com/lamella  for more information on Rockfon Lamella.To view all the FIS Innovation Award winners visit www.thefis.org/membership-hub/fis-awards/innovation/

The developer of an apartment conversion scheme in the Pennine hills village of Diggle near Oldham wanted to achieve superior sound reduction standards in the walls and floors and go beyond the minimum requirements set out by the Building Regulations.The Old Mill House project involved transforming a Victorian industrial building into several residential dwellings. The project’s design needed to comply with the requirements of Approved Document E, which sets out minimum standards in England and Wales for airborne and impact sound transmission between dwellings where there is a Material Change of Use.However, to deliver the highest quality living accommodation to potential buyers, the developer insisted that the acoustic specification not only met the minimum standards but went beyond them.To achieve their goals for the floors and walls, they approached Hush Acoustics for assistance in developing the specifications and providing the required products.Given the unique nature of the properties being created, the acoustic design for the flooring had to be compatible with underfloor heating and more unusual floor finishes such as stone tiling.The specification developed by Hush Acoustics for the separating floors beneath the floorcoverings featured a plywood timber deck, below which was the underfloor heating system and 8mm Hush FFR resilient underlay.For the ceiling side, Hush recommended standard acoustic insulation for use within the timber joists, two layers of 15mm Fireline plasterboard attached to the underside of the joists, the Hush MF Ceiling System to allow Hush Slab 100 to be fitted in the void created, finished with a layer of 15mm Soundbloc plasterboard.For the separating walls, two specifications were developed according to the types of walls. In areas where there was an existing masonry wall, a wall lining consisting of independent stud work, Hush Slab insulation and Soundbloc plasterboard was developed. In other areas of the scheme, a twin timber stud wall is recommended, again featuring Hush Slab insulation and Soundbloc plasterboard.As part of the process, the Hush Acoustics team undertook many site visits and guided the design and build process to ensure the correct installation was followed, and pre-completion testing was also arranged.The solutions developed and provided by Hush Acoustics fully met the developer’s goals to go beyond Approved Document E’s compliance standards according to the pre-completion tests.

Whilst following government guidelines, Beplas have supplied a huge amount of material for a number of key businesses and projects during the Covid-19 crisis. We have supplied materials for hygienic environments in Nightingale temporary hospitals, a huge number of smaller temporary installations at schools and leisure centres around the country.

Acoustic consideration was critical for the design of a new generation cycle studio in London. An isolated sound box was constructed to form the studio with stud walls built to separate it from the café – using a lift shaft model allowing for air and acoustic separation.To complement the paired back industrial ‘Scandi’ design and monochrome pallet, HERADESIGN® in black was specified throughout. Joe Stuart of Warehome Architects said, “Heradesign was perfect for this project. It provides excellent acoustic properties and we love its natural, raw wood wool texture. Specified in black it is really striking.”

Acoustics in this spectacular courthouse is controlled using Rockfon Mono Acoustic.

Rockfon Mono Acoustic's tile/filler/render system was used to control reverberation in a large open plan office.

One of the most iconic buildings in central London.The building has been reborn hotel and residential complex for highflyers in the financial services sector. Woods Bagot’s scheme for 10 Trinity Square, nicknamed ‘the whirlpool’ after the glass canopy at its centre.10 Trinity Square was commissioned by the Port of London Authority in 1911 through an architectural competition won by Edwin Cooper. Completion of Cooper’s Beaux Arts design was delayed by the First World War (it was finished in 1922).Many of the original interior features were conserved while incorporating the servicing requirements of a modern hotel. As such, plaster ceilings, such as those situated in the south wing of the second floor, are being maintained and the original air vents may be used in the new HVAC strategy.For this development, Selo used the Una doors which are the solution for timber leaf risers. Una utilises a timber door leaf with a concealed metal frame. Made to suit custom sizes, provided as a flat-packed kit prepared for all ironmongery.

Styccobond F49 Hybrid PS vinyl adhesive has been used to install a luxury vinyl tile floor finish at the Pavilion Bar on Norfolk’s Cromer Pier ahead of BBC television programme ‘Antiques Roadshow’ shooting an episode from the pier. Contractors took up worn carpet tiles and securely screwed down plywood sheets over the boardwalk subfloor, prior to installing Altro Wood Safety LVT’s. Styccobond F49 was applied prior to the installation of LVTs. Unlike other water-based adhesives, Styccobond F49 is resistant to water, making it the ideal choice for an installation such as this situated directly above the sea.

A stunning residential project in Longfield, Kent, saw multiple wetrooms installed and stylishly fitted with our products, creating both level entry access and a uniform look.

Located just off New York Street in Manchester city centre, Manhattan is a seven-storey development comprising 42 one and two-bedroom apartments. In a New York loft style, each property features floor to ceiling windows and private terraces set into a multi-level garden wall. On the seventh floor, there are duplex penthouses offering views over King Street and across the city. The ground floor also offers 2,000 sq ft of retail space.During several site visits, the original red brick was examined, and the requirements for a blue/black finish was discussed. Using KEIM’s Brick Colour Range, Nicola Young, KEIM’s Senior Colourist, conducted trial applications of KEIM Restauro Lasur, using different opacity ratios, to ensure colour consistency.Once the colour required had been achieved a specification was produced for a four coat KEIM Restauro Lasur system, comprising of two coats of diluted bespoke black base colour in a fairly opaque finish, followed by two further coats of a combination of two differing colours, more heavily diluted.The original red brick front façade of this five storey building was retained and enhanced to reference a more industrial feel. To fulfil the design brief, the client wanted to change in colour of the bricks to blue/black, without the bricks appearing painted.KEIM Restauro Lasur, a low pigmentation silicate colour wash, which acts as a stain that penetrates the surface of the brick, was used to change the colour of the façade, retaining the look and feel of the original bricks. KEIM Restauro Lasur is a breathable, colourfast system, which retains the original brick appearance and increases light reflectivity, whilst retaining a natural looking finish. The beauty of the KEIM Restauro Lasur system is that it can be used to achieve almost any effect without the surface appearing painted.

Over six years ago, law firm Kingsley Napley considered consolidating its three Clerkenwell offices into a single building. Before committing to do so, the firm first embarked on a programme of partial refurbishments and pilot testing in its existing offices to examine how a transformation from cellular to open plan working might suit their business and its more than 400 employees. Once the decision was made to move, Kingsley Napley collaborated with design specialists KKS Savills and Overbury fit out and refurbishment, along with BPC interiors as sub-contractor, to create an environment which would help enable the company to flourish and meet its aspirations for recruitment, retention and growth. Fast-forward to 2021 and the firm occupies six floors at Twenty Bonhill, Shoreditch.Delivering a best in class workplace Kingsley Napley CFOO Darren Jesse spoke about the project, “I am delighted we have delivered this project, pretty much on time and on budget, despite the challenging circumstances of the last year or so. We had an incredible team working on this internally, and our external advisers… provided superb support for which we are grateful. Together I believe we have delivered a first rate, best in class workplace for Kingsley Napley that will support the firm in its next chapter.” The new space has been designed with collaboration and activity-based working in mind by allowing lawyers and other team members to choose workspaces according to their needs. The guiding aesthetic throughout the six floors is one of hushed self-assuredness with a hint of opulence characterised by classic contemporary furnishings in muted tones, modern art and the use of deep blue and orange on feature walls. In the reception, elegant slim lighting is fixed at a distance from the high ceilings in converging angles while a fully glazed wall lets diffused natural light stream in. The move coincided with a new brand identity incorporating the phrase, ‘when it matters most’ into its communications – words which underpin the role often played by the company in the lives of its clients and informing the values it wants to portray in everything it does.Creating that Wow with added HushBPC Interiors Senior Construction Manager, Stuart Dowling, “We managed the project and instructed Pacy & Wheatley to install Rockfon® Mono® Acoustic throughout the large double-height reception. The Installation went very well and an impressive smooth finish was achieved that even with sunlight or interior lighting shining on it did not show any of the services behind, which can be the case with plasterboard.”Installation specialist Pacy & Wheatley Director Craig Wheatley, “This was a prestigious and exacting project where creating a space to project the perfect first impression was vital. Rockfon Mono Acoustic is unique as it combines the elegance of a monolithic ceiling with performance characteristics and sound absorption thought only possible with modular ceilings. The ceiling tile substrate is installed and then finished with a specialist acoustic render to create a seamless surface.” Beauty and performanceThe system allows for easy incorporation of lighting, audio and other mechanical systems whilst delivering Class A2 fire protection. It also offers dimensionally stability at up to 100% relative humidity and can be installed in temperatures ranging from 0˚C to 40˚C.KKS Savills Associate Director and Senior Designer Paul Butterworth, “Mono was chosen for its appearance but also for its ability to mitigate against the unwanted sound generated by hard surfaces. It delivered clean lines while successfully hiding the services above. We are so pleased to have discovered this beautiful, fabulous product!”Fully recyclable, all our ranges are made from a core of naturally occurring, non-hygroscopic and non-combustible stone wool. Their surfaces provide no sustenance to harmful micro-organisms, embody high humidity resistance and are impervious to most environmental pressures – ensuring that perfect first impression will last.  

Altro kitchen system provides a perfect fitAltro Whiterock White, Altro Stronghold 30“We chose Altro Whiterock because it provides an easy to maintain, hygienic surface that is ideal for kitchens and have up to date fire certification.”Ben Rodgers,Cladpro LtdIssueBannold are one of the UKs largest independent family run suppliers of natural hard landscaping materials. Based in Cambridgeshire, Bannold wanted to refurbish 1920 railway carriages to create a tea room for customers.The Carriage Tea Room had a dated wooden substrate that needed to be replaced with a modern hygienic clinical finish for the kitchen facilities. The walls were not a square flat surface and needed a flexible product that could be fitted into the space. Floors and walls had to be easy to clean and maintain and fit into an environment without a straight line.ApproachCladpro are leading Altro Whiterock Premier installers specialising in hygienic wall finishes, floor coverings and ceilings. They suggested the Altro kitchen solution for the kitchen carriage. All the walls were thermoformed and wrapped to fit the unusual shape of the carriage.SolutionAltro Stronghold 30 keeps staff safe, with Altro’s highest slip-resistant rating of (PTV 55, R12) even with common kitchen contaminants such as grease, oil and flour. With 3mm comfort underfoot and 10dB impact sound insulation, it makes busy and noisy kitchen environments more comfortable for staff. Combined with Altro Whiterock it creates a full sealed solution to maintain the highest levels of safety and hygiene.

The new London headquarters of the prestigious Royal College of Surgeons of England celebrates its historic origins and looks forward to its future as a place of learning for 21st century physicians and dentists