"mechanical cleaning chemical systems"

A full refurbishment and renewal of the Endoscopy Unit included specialist stainless steel equipment from GEC Andertson Limited. Height adjustable sink units were required due to the ergonomic demands associated with the rigourous and meticulous cleaning of scopes. A fully stainless steel specification was demanded for reasons of hygiene but also of durability.Endoscopy is an activity under ever-increasing demand for may and varied ailments that are treated in hospitals, due to it’s relative speed and to its less invasive nature, compared with conventional operations.GEC Anderson were able to provide the necessary sink sizes to accommodate the [sometimes large] scopes. The cost of the scopes make it essential to do everything that is reasonably possible to prolong their life through correct cleaning and maintenance procedures.GEC Anderson have been involved in many other such facilities as well as other specialist hospital units.

Opened in June 2017, RIBA North is RIBA’s nationalarchitecture centre based at Liverpool’s Waterfront. Aninspirational resource for both members and the public,it plays host to a variety of architectural exhibitions andtalks.Because of the prestigious, landmark nature of theproject, Allgood was selected by architects BroadwayMalyan to deliver a bespoke ironmongery specificationthat would seamlessly integrate with the 2.4-metre-highglass doors in the front entrance, gallery and WCs.Allgood designed and manufactured bespokestainless-steel pull plates that were laser etched withRIBA font lettering in-house at our Brearley Streetfactory. The pull plates were required to integrate with arange of glass doors, which meant detailed setting outto ensure compatibility of fixing mechanisms with thespecific toughened glass construction, to avoid any riskof unnecessary strain on the glass material.Further bespoke elements included custom-made pushand pull handles that were fitted to toilet cubicles withconcealed fixings to deliver the desired contemporaryfinish to complement the modern aesthetic throughoutthe building The project is testament to the combined effort of thedesign teams as it involved months of collaboration andplanning between Broadway Malyan, the main contractorISG, and the specialist door providers, to ensure thechosen designs translated into end products that metmechanical compatibility and performance requirements.Allgood was involved at all stages, from inceptionthrough to the manufacturing and delivery. As well asbespoke products, the iconic Modric and Mode ranges- which are crafted from grade 316 solid stainless steel- were selected for their durability and sleek design.These were specified in the RIBA staff spaces, such asthe meeting rooms, offices and staff accommodation.

This Stirling Prize winning scheme by Sir Norman Foster was, as you would expect, quite demanding on the products Our brief comprised of the complete fit-out including all buildings; seven cores above ground, which including 400 superloo washrooms, wall finishes, feature entrances. We supplied ironmongery fittings to over 1,000 bespoke doorsets, all of which we provided a full ironmongery scheduling service for. Each doorset had an enhanced thickness to achieve specific design details and satisfy standards, involving the mechanical handling due to weight and sizes. Finishes include timber veneer, lacquer and feature coverings to match adjacent areas.

8300 SQM of Optima FC+, Optima FC+ perforated panels and Optima IPC (soffits) have been used in the completion of the 23-storey New Bailey building in Salford Quays.Optima FC+ was selected for a number of reasons on this project.Predominantly, it is an incredibly user friendly system – panels can be quickly and easily adjusted on site and the system can be fixed top down, or bottom up with individual panel removal and replacement. This makes Optima FC+ a highly desirable choice for designers and installers.However, the panels were specifically adapted for this project to enable a completely secret fix system, as per the architects vision. Therefore the top return fold was increased to 50mm instead of 38mm. This allowed for the security fixings to be completely concealed by the panel above, allowing the customer to easily fit the panels from ground up.Sotech worked closely with the design team and installer at the very early design stages to make this modification possible. The teams used a 3D modelling route, which allowed the customer to comment and make changes to the model without physical cost.Optima FC+ perforated panels were chosen as an additional aesthetic feature and Optima IPC was selected for the soffit areas as the architect requested a secret fix system.A bespoke window reveal and bracket was included in the panel design. This allowed for an extended side return which was used to hook on the panels and enable a secret fix. The Optima IPC system was perfect for this part of the design as it enables hidden mechanical fixings and is a cost-effective solution using 2.0mm aluminium.Black PPC aluminium was used as backing trays to enhance the appearance of the perforations, prevent views through the perforations and close off the cavity.Optima FC+ has been independently tested and certified to meet CWCT rigorous specification for rainscreen cladding and has been fire tested to BS8414-2 and classified to BR135 for high rise buildings. This makes it the perfect solution for Plot C1, now the tallest residential building in the New Bailey plot.Plot C1, which features a six-storey podium with an exclusive rooftop garden terrace for the wellbeing of residents, incorporates a number of sustainability measures including surface water drainage attenuation, minimising off site spoil disposal, reduced water consumption.The project has been shortlisted in the 2022 Facade Awards UK for ‘Best use of a rainscreen system using aluminium’.

Suma International Manufacturing Company fabricated 26 Halspan FD90 64mm for Jawaher Residential Building.Halspan 90 internal fire door blanks feature Halspan's unique 3-layer particle board. Specifically designed for the purpose, using a complex combination of chemical and engineering development, these blanks produce doors of altogether superior quality, strength and overall preformance.The Jawaher Residential Building is suited in Salmiya, Kuwait, and compromises of 13 floors featuring luxury apartments, a gymnasium, and a rooftop swimming pool overlooking the city.This project featured 26 fire-rated doors fabricated using Halspan’s FD90 64mm unique 3-layer particle board that is durability tested to severe duty and is suitable for veneer, laminate, or paint finishes.The doors were used in the primary entrances for all floor levels and are latched single-acting single doors (LSASD) featuring a wooden frame and solid red meranti lipping with beech veneer facing.This project was contracted by Main Contractor; Al Daleel General Trading & Contracting Co and was fabricated by Suma International Manufacturing Company.Photography courtesy of Suma International Manufacturing Company.

Project DetailProject: Motel One – ManchesterLocation: Manchester Piccadilly, UKProduct: TS.9000 range of architectural closers for main reception and TS.3000 range of contract closers for apartmentsProject Description“Manchester has got everything except a beach,” said Ian Brown, lead singer of The Stone Roses. The city in the northwest of England is known as a party and music capital. Bands such as Oasis, The Smiths or The Chemical Brothers have their roots here. However, if you want to experience all the different aspects of this diverse city it would be best if you booked a longer stay at your cheap and centrally located Motel One Design Hotel in Manchester.Brand new and built in a very tight but friendly spot the Motel came as no surprise requiring a couple of door closers for its Hotel and resting overnight stay accommodation. The TS 9205 were chosen for heavily used entrance area and the TS 3204 were chosen for their bedroom doors because:They are supported by an established companyHave excellent right up and guaranteesVery easy and fast to fit and adjust making them the perfect answer for the contractor and door manufacturer.

The past few years have really thrust hygiene into the spotlight. From robust cleaning to hand hygiene, people have become increasingly aware of the role that cleanliness plays in managing infection transmission. ​Steve Levy looks forward to what this might mean throughout 2022.

This imposing Victorian semi-detached villa required complete refurbishment, both inside and out. As well as brick-cleaning and repointing, stonework repair and new fascias, an important part of the project involved replacing the traditional box sash windows with modern, energy efficient, secure alternatives.

A Modern and Stylish Dream HomeThis stylish home is a quintessential residential project, designed for ease of life and hassle free functionality.Bearing this in mind, our Evolve line was the perfect fit for this project. The motorised roller blinds provide clean aesthetics and practical functionality with equal proficiency.

A refurbishment of a hospital restaurant, where the look and feel of ceramic tiles was required without the high level of ongoing maintenance that this material demands. The solution a 3D digital image depicting tiling was agreed giving the area a crisp clean hygienic finish with low level maintenance requirements.

Client: Highways Agency, England, with Northampton CC Main Contractor: Balfour Beatty Main Products Used: Emseal BEJSEmseal BEJS used to seal Parapet & Wing wall joints on the new A45 Dodsmoor Bridge in Northamptonshire:This new bridge forms part of the A45 Daventry Link Road at Dodmoor in Northampton, where the wing-wall joints and the parapet joints with the precast elements provided a challenge for the engineers. These joints had to be able to accommodate the anticipated high levels of movement, but the site measured widths of the joints varied from around 25-30mm up to around 100mm. The potential movement, including movement in different planes, their variable form and dimensions, were too much for any ‘normal’ preformed joints, or extruded, gun-applied, so-called ‘mastic’ joint sealants to be used. This is clearly evidenced in the inset picture, where the specified extruded sealant was already seen to be failing under this loading. Additionally, the wing-wall joints were to be back-filled with a watertight seal. Following previous experience with difficult and complex movement jointing requirements, the Balfour Beatty engineers discussed the situation with NCC and the Emseal BEJS System was identified as an ideal solution. Emseal BEJS is available in different widths that can also be precompressed further for ease of installation, it is fast and easy to install, plus importantly requires no invasive mechanical fixings.

When undertaking a heating, ventilation and air conditioning (HVAC) maintenance and upgrade contract on a North Sea offshore platform, RBG Limited identified that critical noise levels were apparent in a range of working areas.Investigating the issue, RBG Ltd commissioned environmental sound testing, which revealed that ambient noise exceeded a specified minimum of 55dB (A) throughout the electrical workshop, store room, hydraulic workshop, subsea office and mechanical workshop, reaching its highest levels of 88-96dB (A) in the mud pit room. Additional noise generated by operating pumps, cranes and machinery would further increase the noise levels in these areas.As such, RBG Ltd needed to source a high performance industrial acoustic solution that would sufficiently reduce the noise contamination and make the working environment acceptable.Seeking expert industrial acoustics advice, RBG Ltd briefed CMS Acoustics on the project parameters, who responded with a bespoke ISO Acoustic Enclosure Panel system design.The SolutionThe ISO Enclosure Panel is a prefabricated sound reduction system, designed to create noise-protected structures in industrial environments. A self-supporting and robust construction, it offers the additional benefit of a short assembly time, facilitated by the panels being lightweight and easy to handle.The industrial acoustics technical team at CMS Acoustics calculated that a combination of 50mm and 100mm thick ISO Enclosure Panels would be required to achieve the specified noise reduction in the different areas. Depending on panel thickness, fire resistance ranging from 30 minutes to two hours can be achieved.For RBG Ltd, CMS Acoustics manufactured the panels in white and supplied them in ready to assemble kits clearly labelled according to area for installation. Some panels were manufactured to allow removal for maintenance while others were designed to be stud welded to external walls.To increase system robustness, CMS Acoustics integrated acoustic doors and vision panels into the ISO Enclosure design.

1,500/M2 3mm Aluminium 1050 Grade H14 in Optima FC and Optima TFC systems has been used in the completion of the striking Onyx Building, Lancaster Circus in Birmingham. Optima FC was selected as the client required a hook-on cladding system with secret fixings for the main extent of the face. Optima TFC was then used in a mechanical fix for the slatted window cover panels due to barrier loading requirements.The building, which has been designed to achieve a BREEAM Excellent rating, comprises of two bold, angular towers with sharply defined ‘razor’ edges and a smooth, highly detailed, gloss black finish, rising 13 and 24 storeys respectively. The towers are anchored by a middle section rising to 10 storeys and finished with a traditional, matt brick with defined window reveals and texture.The Optima FC & Optima TFC systems were used with bespoke detailing where the main façade (Optima FC Hook On) met with a slatted window cover panel (Optima TFC).Sotech and Axalta Coatings created colour matches to Alucobond 887 & Alucobond 888 Metallics to allow this project to proceed via a powder coating route.Now available for students, the 1025 building occupies one of the most prominent sites in the heart of Birmingham City, positioned between Vesey Street, Lench Street and New Town Row.TESTIMONIALSJamie Smith, Estimator:“It’s an eye catching building in a busy area of Birmingham. The mixture of Axalta 887 & Axalta 888 Metallic is almost alien against the traditional brick and terracotta buildings within its proximity.Phil Fisk, Axalta:“The striking, dark colours chosen for this project were bespoke metallic products bonded to gain the highest application stability. Manufactured using Axalta’s Super-durable Polyester resins incorporating higher grade pigments and stabilisers, the enhanced coating provides outstanding exterior durability as well as looking aesthetically impressive”.

Multiple teapoint sinktops and cafe servery counters as well as cabinets and panelling were supplied to the UK Headquarters of Sony Computer Entertainment.Integral upstands were specified to all wall junctions for easy of cleaning and to ensure good levels of hygiene and durability. All sink bowls are seamlessly integrated.

To maintain a safe, clean entrance befitting this renowned institution, bronze anodised INTRAform entrance matting runs the full length of the lobby. Encompassing three revolving doors and pass doors, the entrance matting measures over 30m x 3.5m deep and utilises a modified zonal for optimum performance.

The Cyclepods Canterbury 40 Bike Compound is a secure facility for bikes with the ability to add extension units to suit most spaces. Shelter manufactured from hot dipped steel Galvanised 50 x 50 box section to BSEN ISO1461 Transparent PET 4mm roof Optional Transparent PET 4mm sides Aluminium fixing straps Anti-climb end panels No crawl under perimeters Angled roof Rear security panel Front security swinging gate Padlock/Hasp locking mechanism BREEAM AND CODE FOR SUSTAINABLE HOMES COMPLIANT This cycle compound can help contribute towards gaining ENE8 Cycle storage credits when used in the appropriate situation

The Cyclepods Canterbury 20 Bike Compound is a secure facility for bikes with the ability to add extension units to suit most spaces. Shelter manufactured from hot dipped steel Galvanised 50 x 50 box section to BSEN ISO1461 Transparent PET 4mm roof Optional Transparent PET 4mm sides Aluminium fixing straps Anti-climb end panels No crawl under perimeters Angled roof Rear security panel Front security swinging gate Padlock/Hasp locking mechanism BREEAM AND CODE FOR SUSTAINABLE HOMES COMPLIANT This cycle compound can help contribute towards gaining ENE8 Cycle storage credits when used in the appropriate situation

Yeoman Shield protection panels have been a great success at Springwell School in Hartlepool. The environment is safe, nurturing and stimulating, so that every child reaches their full potential with the help of Yeoman Shield products.Yeoman Shield protection panels have been an un-mitigating success at Springwell School in Hartlepool.The school caters for children aged 3 to 11 years who have a broad range of specialist needs and the vibrant and busy spaces can suffer from impact damage caused by the everyday activities of the students and staff.To counteract such damage and to keep the classroom and communal areas looking clean and welcoming the school have previously utilized Yeoman Shield FalmouthEx Wall and Door Protection Panels.Site Manager, Dean Henson commented “We already have Yeoman Shield protection panels on walls and doors in areas around the school, including the hall which can be used for many things ranging from a dining hall to activities hall. The panels have been in place for around 5 to 6 years and still look as good as new.”Having proved to be long lasting and durable the school decided to bring Yeoman Shield installers back during the February half term to continue the wall protection panels throughout corridors.Yeoman Shield 2.0mm thick FalmouthEx protection panels were supplied on this occasion in attractive mid grey and lilac colours with the addition of a waved top giving a decorative feel to the walls.Manufactured from a non- porous rigid PVCu the protection panels are not only easy to clean but are inherently hygienic as they do not promote the growth of bacteria or mould.As recognised by Springwell School the implementation of wall and door protection systems can reduce the amount of time and money spent on the repair and re-decoration of wall and doors throughout the buildings, extending the lifecycle of the interior decor.

TRC was appointed as principal contractor by Barker Associates in May 2019, to carry out specialist sash window restoration works.Trinity Primary Academy is a primary school located in Bounds Green Road, Wood Green, London. It was built in 1899 by Mitchell and Butler and consists of yellow brick and red brick dressings, tiled roofs, irregular fenestrations, and sash windows that give away its Queen Anne Revival style. It's currently categorised as a Grade II Listed building with Historic England, and is part of the Academies Enterprise Trust.Nature of the worksAs the building was Grade II listed, timber window repairs had to be sympathetic and complementary to the historic nature of the property. Many of the existing timber sash windows were inoperable due to the build-up of decorative coatings, timber degradation, and defective and broken sash window ironmongery, as well as opening mechanisms. The requirement was for the windows to be fully refurbished, repaired and operational as originally intended, but also modified to meet health and safety requirements.Phase one of the refurbishment of 200 sash and timber casement windows commenced on the area needing most attention: the west elevation of the building. Following the success of phase one, the client team extended TRC’s appointment to continue around the remainder of the building, systematically completing all other windows, door and roof light refurbishments.This overall refurbishment project included:Stripping back the existing paint from the historic sash windows and repairing any decayed timber.Repairing glazing as and where necessary.Improving the thermal and acoustic containment by installing draughtproofing.Repainting windows and installing ironmongery.Undertaking brick and stone repairs to the building’s exterior.This project also required our specialist attention on some specific areas of traditional glazing. This aspect of the project required the repair and refurbishment of all four oriel bay windows and the oriel bay glazed roofs. Completion included the supply and fixing of new safety glazing and hardwood timber roof rafters, along with the repair and refurbishment of the two existing openable roof lights. The supply and fixing of new code 4 lead flashing, with lead wedges, was also carried out and fully pointed with the correct cement mortar at the wall abutment.Additional detailed work throughout the project included the following:Removal of all existing fitted window blinds for refixing upon completion of works.Removal and repair of existing window ironmongery, including original mechanical winding gear, solid bar opening mechanisms, locking fasteners, slide bar restrictors, cable restrictors, handles and stays.Careful removal and repair of all internal fixed-glazed hopper units, casements and pivot openings.Removal and replacement of all cracked and broken glazing, and replacement of the existing Georgian wired-glazing, with 6mm safety glass or 4mm polished plate glass to areas up to 1.2m height from floor level. Where privacy was required, white opaque glass with thickness in accordance with above was used.Removal and replacement of all loose and defective glazing putties, and removal of all flaking, loose and built-up paint coatings.Exposure of all timber rot and decay ready for repair with Repair Care Systems products, followed by sanding and priming ready for decoration.Vertical sliding sashes repaired, refurbished and rehung on new sash cords and weights, and adjusted as needed. Sashes were routed to accept new brush pile weather stripping. New parting beads and staff beads were serviced with brush pile weather stripping where appropriate.Final internal and external decoration was carried out using Dulux or Leyland trade paints, allowing for one undercoat and one gloss finish.

application area: domestic heatinguse type: gas fireplace project scope: restore fireplaces, rebuild chimney, line chimney ductadded value: 25-year guarantee on liner, quick and clean install, non-destructiveBackgroundThe camera survey revealed cracks in the chimney flue of a large victorian house in Muswell Hill. To protect against carbon monoxide leaks, the chimneys had to be lined before the gas fireplaces could be fitted. A flexible and uninflated FuranFlex tube was placed inside the chimney duct. Each FuranFlex liner is produced to fit the dimensions of the duct. Hot steam is used to inflate and harden the liner, fixing it in position.Statement of workThe installation took one day per chimney. The jointless and air-tight liner provides good draught and a clean and safe operation for the fireplaces. When FuranFlex liners are inflated they take up the shape of the chimney, providing maximum lined diameter and natural draught.

Set in beautiful grounds this former coach house is nestled in a picturesque Cotswold village.This stunning orangery was the perfect solution for the family who wanted to have a light filled room, from where they could sit and enjoy their garden throughout the year.The stone-coloured exterior paint finish of the David Salisbury orangery is the perfect complement to the sandy-coloured Cotswold stone and stone roof of the main building.The glass lantern benefits from Pilkington Activ™ Blue self-cleaning glass, which has both self-cleaning and solar-control properties plus high performing thermally insulating Pilkington K Glass™ S as the inner pane of glass.The result of this carefully designed addition to a home that already oozes character and charm is a light filled environment that can be use throughout the Summer and Winter months, where the family can sit in total comfort.Images courtesy of David Salisbury.

Turning a roofscape into a power station just got better. The combination of GreenCoat PLX with integrated, almost invisible solar functions to deliver green energy and good looks. The solar modules are bonded directly onto the metal roof within the controls of a factory environment at Metal Solutions Ltd, Bolton. Lightweight and maintenance free with no access requirements for cleaning the solution is a real game changer. Each module is 358mm wide and sits between the Snaplock® standing seam profile. In harmony with GreenCoat Mountain Grey the solar modules are virtually invisible from the street. A traditional Glass Crystalline module would add substantial weight, wind sheer load on the standing seam fixings and require access for bi-annual cleaning with the then risk of damage during that process.The thin, flexible solar modules do not detract from the design of the house and offer an excellent yield even in low light conditions.

A series of special inset, textured finish, stainless steel sinktops were included in a recent upgrade to classrooms and art rooms within Exeter’s Bidwell Brook School.Chosen for their practicality and durability but also for their neat and clean appearance, the inset sinks feature lipped edges all round to prevent spillage.

Bringing space to life in Blackburn’s new Acute Medical Unit.Hygenius delivered the full FF&E for reception, wards, storage, staff education and wellbeing facilities at this new AMU for Blackburn Royal Hospital. The bright colours of the interior combined with its simple, clean design bring the space to life.

Project Overview:Reducing the visual impact of guttering systems on the design of buildings is always a challenge for designers and architects. One solution is to use these systems as an architectural feature in themselves. The Justice Court collection of retirement homes in Cromer is one such case. These beautiful red brick and stone buildings have an aluminium guttering system combining the gutter, fascia and eves functions together with fascia panels above and below the large bay windows. The design intention was that these aluminium elements should resemble the feature stone band running across the building and to become a design statement in their own right. A close match to the shade and texture of the stone was required, and a consistency of colour throughout to emphasise the clean lines of the guttering & fascia system.The SolutionPowdertech Corby's Landscape range is a collection of high performance polyester powder coatings with shades and textures reflecting those found in our natural surroundings. Powdertech worked with their client to find a close match to the stone on the building. The amount of material to be coated required two batches so it was essential to have absolute colour consistency between batches. The total area coated was approximately 250m2.On the finished building the guttering, soffit and fascia look as though they are made of stone, providing a most pleasing effect. At Powdertech we were delighted to demonstrate our expertise for colour and texture matching. The final result vindicates our passion for this aspect of our work.BenefitsThe Landscape collection of powder coatings bring the warmth and texture of natural elements to the technical benefits of an architectural systems.There are currently eight Landscape ranges with over 40 shades. Customised shades can also be made. Landscape provides an ideal solution where the design calls for a highly specific colour tone to blend or complement natural surroundings.

RESIN BOUND SWIMMING POOL SURROUND FOR DAVID LLOYD GYM IN ACTONAddagrip approved contractor Total Protection (GB) Ltd has installed 294m2 of Addabound Resin Bound surfacing around the swimming pool at the David Lloyd Gym in East Acton, London.SURFACING REQUIREMENTThe client was looking for a decorative Resin Bound paving for the outdoor swimming pool at the gym which has just undergone a £9m refurbishment to provide an indoor and outdoor pool, modern spa and racquet courts. The requirement was for a low maintenance system that would be smooth and comfortable underfoot, providing a decorative aggregate finish that could be powerwashed as part of the cleaning regime of the pool area.Interserve Construction appointed Total Protection (GB) Ltd to prepare the surface and install 294m2 of BBA approved Addabound Resin Bound surfacing in a recycled marble Dune blend.The challenge was the preparation required to the existing surfaces surrounding and adjacent to the outdoor pool to ensure a suitable substrate for the Resin Bound system. Undulations and differing depths were regulated with compatible screed material and an aluminium edge detail was installed to provide an edge for the 12mm depth of Addabound.The new surface was installed in a single application in May 2018 to prevent any day joints and ensure the smooth, seamless finish was achieved in time for the grand opening.

Resin bound Addabound porous surfacing for sports complex swimming pool surround.Addagrip approved contractor Total Protection (GB) Ltd has installed 294m2 of Addabound Resin Bound surfacing around the swimming pool at the David Lloyd Gym in East Acton, London.The client was looking for a decorative Resin Bound paving for the outdoor swimming pool at the gym which has just undergone a £9m refurbishment to provide an indoor and outdoor pool, modern spa and racquet courts. The requirement was for a low maintenance system that would be smooth and comfortable underfoot, providing a decorative aggregate finish that could be power washed as part of the cleaning regime of the pool area.Interserve Construction appointed Total Protection (GB) Ltd to prepare the surface and install 294m2 of BBA approved Addabound Resin Bound surfacing in a recycled marble Dune blend.The challenge was the preparation required to the existing surfaces surrounding and adjacent to the outdoor pool to ensure a suitable substrate for the Resin Bound system. Undulations and differing depths were regulated with compatible screed material and an aluminium edge detail was installed to provide an edge for the 12mm depth of Addabound.The new surface was installed in a single application in May 2018 to prevent any day joints and ensure the smooth, seamless finish was achieved in time for the grand opening.

Chaos under the kitchen sink. Sounds familiar? The waste bin takes up too much space, cleaning agents and utensils clutter up the cabinet and lots of storage space is wasted. It’s important to make full use of this often-neglected space and tidy up one of the most used areas in the kitchen.

Hailed as a biomedical research landmark, the state-of-the-art Francis Crick Institute is located next to St Pancras Station and was designed by HOK / PLP Architecture. The INTRAflex XT Heavy Duty Entrance Matting was selected for use to ensure effective removal of foot borne soil and moisture, keeping floors safe and clean.

A light lift is a self-contained winch used to raise and lower chandeliers and other types of luminaire or sculptures, providing easy access for cleaning and maintenance. More than a simple rope, a light lift is designed with safety in mind, adhering to stringent UK safety regulations, contributing to a safe working environment for employees.

Clean lines and a soft colour palette, makes this summer house a modern, scandinavian dream. The house is located in beautiful Gilleleje, and was decorated by danish interior designer and influencer Emil Thorup. The bathroom is attired with products in brushed steel from the Qtoo collection, and the minimalistic design is an immaculate match with the aesthetic expression of the house. 

AG supplied its well-established Plaza Lineal paving in Salt, Pepper and Birkes to provide a beautiful and robust hard landscaping solution for external surroundings at the highly esteemed Exeter School. Creating a pedestrianised area at the centre of the site, making it safer and a more aesthetic and pleasant environment for pupils and staff. The striking colour blends creates an eye-catchingly beautiful contrast with the 1633 building, adding vibrancy to the school.The Plaza Lineal 120mm paving was laid to allow a one-way system through the site. Plaza Lineal paving was the perfect choice for Clifton Emery Design as the paving has a technical loading capability of 3.5 tonnes on flexible construction, making it ideal for lightly trafficked and pedestrian areas that require access for cleaning and light vehicles. The ultra-linear formats and mixed sizes have been designed to deliver maximum performance and versatility – offering almost limitless design possibilities for architects.The recent refurbishment is part of Exeter School’s long-term strategic planning programme.

The redevelopment of Yatala Prison in South Australia is supporting the advancement of the state’s public prison structure, reinforcing the security and reducing the rate of offending. Dart Valley Systems have contributed to the completion of the $149 million project with the installation of their products.The products used were as follows:·       138 x VR01-010 High Security Ligature Resistant Toilet·       4 x VR01-072 V2 High Security WC Pan Less Abled with Grey Top·       140 x VR01-080 High Security High Sided Integrated Basin (not including sensors)·       2 x VR01-031 High Security Single Spout Integrated Basin (not including sensors)Our GRP High Security products are designed for the toughest environments, manufactured using specialist mould tools, the layers of thick gelcoat give it a hygienic, clean, and durable finish. The material is robust and fire retardant, making it ideal for high security or correctional facilities. The construction of Yatala Prison is set to be completed by April 2022. 

Customer: Mark Greensill, Rugeley, West Midlands, England Background to the IssueMark Greensill from Rugeley in the West Midlands had a major issue of weed ingress in his garden pond. The garden feature was created 15 years ago and after fitting a brand-new pond liner just last year the very aggressive weed Mare’s Tail (also commonly known as horseweed) had broken through a seal and was growing rapidly in the pond. The creeping stems of this highly destructive plant may go down deep below the surface, making them hard to remove by digging out. CT1 Provides and Environmentally Compliant SolutionMark needed a long-term solution to repair the liner without replacing it, whilst being environmentally friendly to ensure no detrimental chemical impacts on the pond life and ecological biodiversity of the surrounding areas. Containing neither solvents nor highly reactive isocyanates CT1 is environmentally compliant and perfect for all pond and water feature maintenance as it will not affect any aquatic plants. Why Choose CT1?Having seen CT1 in his local hardware store and previously watched videos of internet sensations The Bald Builders sticking a skip to the ceiling and driving a Ferrari under it, Mark was sure it would provide the answers to his problem without having to drain all 900,000 litres of water out of the pond.For ease of access to remove the Mare’s Tail he pumped out approx. 250,000 litres of water. This made identifying where the harmful, spreading weed had damaged the pond liner very easy.As the CT1 is a highly deformable, polymer enriched sealant and adhesive with 350% more elongation it can be used in wet and damp conditions where increased flexibility, resistance to environmental changes and UV light are important.The Application of CT1Mark cleaned any silt and filamentous algae off the effected areas to ensure full contact of CT1 on the pond liner repair.This created a perfect seal that would prevent further ingress of damaging weeds while simultaneously preventing water seeping out of the pond. Another Successful Result Provided by CT1!The repair of the pond liner is a complete success, and the garden feature has been restored for the family to enjoy and local wildlife to benefit from. Mark said;“I’m absolutely delighted with the result. I thought I was going to have to remove and replace the while pond liner. It would have been so much work. CT1 provided such a great solution; cost effective, time saving and environmentally safe for the pondlife and local habitat.”Once again CT1, which comprises of the very best raw materials, has demonstrated why it’s the number 1 sealant and adhesive available. CT1 is always leading the way in quality, service and advancements being made in the construction industry.

Over time bricks can discolour and lose their lustre because of the impact of wet weather, air pollution or efflorescence. The result can have a detrimental effect on a building’s visual aesthetic, compromising the architect’s design vision and reducing the value of the property for the owner. Brick manufacturer, Vandersanden is the first company to develop a viable, large scale coating solution to provide superior protection against efflorescence as well as secondary protection against the effects of pollution.Vandersanden’s automated coating formulation makes facing bricks water-repellent and resistant to the effects of air pollution and efflorescence, ensuring façades remain beautiful and untarnished throughout their lifetime. This innovative and environmentally sustainable process which also makes it easier to clean the brick, if dirt or damage does occur, has now been fully rolled out across the entire Vandersanden hand-formed brick range available to UK specifiers.Vandersanden worked with Belgian University, KU Leuven, to develop the solution which treats bricks with a special coating after the firing process. The process penetrates to a depth from 5mm to 15mm whilst retaining the original colour of the brick.The liquids contain no harmful substances or chemicals that can damage the brick or the environment and is automatically applied at Vandersanden’s manufacturing facilities in Belgium and The Netherlands.A coated brick has exactly the same pore structure as a non-coated brick and the number of pores and their size remain the same. However, as the walls of the pores are covered with a water-repellent layer, the water droplets are no longer attracted to the walls and will not be absorbed. As the pores remain open, the bricks also retain their resistance to frost.Applying the coating during the production process, eliminates the need to coat the bricks with an applicator once they have been installed, which is a highly specialised and expensive process. It also reduces the often laborious and costly task of prepping the facade for a coating and the regular maintenance required.“Creating beautiful facades that will stand the test of time remains crucial for Vandersanden,” says Jean-Pierre Wuytack, CEO at Vandersanden. "Thanks to our commitment to innovation in product design and manufacturing, we can ensure a lifetime of colour-safe brick performance for architects and their clients. We are proud of our coated solution which demonstrates how Vandersanden is the natural partner for architects who care passionately about creating the very best, most long-lasting aesthetic for their buildings.”Vandersanden coated bricks come with a 25-year guarantee and the company has worked hard to ensure these bricks can be delivered at the same cost as non-coated bricks.Vandersanden produces a vast array of high-quality bricks in different finishes and colours, ranging from reds and browns, to greys, creams and buffs that will inspire and enable the design and construction of beautiful buildings.To find out more, register for our RIBA approved CPD #2 "How to avoid brick stains and efflorescence" here CPD – Continuing Professional Development | Vandersanden

CHALLENGEIn Toronto, ON a large mail sorting facility was having an issue with chemicals coming from a concrete processing plant bordering their employee parking lot. The customer was looking to create both a visual and physical barrier from the equipment and excess dust. The fence had to be 2.4m tall, solid and without worry of material maintenance. They wanted to replace the existing fence that was just chain link with tarps, and an eyesore on their property.SOLUTIONA much more visually appealing and effective solution was found with hanit® 100% recycled plastic tongue and groove boards by HAHN, supported by galvanized steel beams. The 3.6m long beams were sunk 1/3 of the length into concrete, then filled with the 3.8cm x 13cm x 2133cm long T&G boards. Each panel was further reinforced at the base using a small hanit® support. The result was a simple, long-lasting privacy fence that met the customer’s needs. Shown here nearly three years after installation, the privacy fence has been a continued success. After numerous seasonal changes and close exposure to the conditions produced by the concrete plant, this installation demonstrates the durability and potential applications of hanit® 100% recycled plastic products.