"wood block and strip flooring"

The University of Northampton campus is split up into several learning blocks.We were tasked with supplying and installing an acoustic lining system into most of these learning blocks. Areas included: – creative hub, learning hub, research & enterprise hub, as well as the engine shed.Included in the Acoustic Lining package were a multitude of acoustic systems and finishes to create a dynamic yet acoustical stable atmosphere within the campus. Systems included; Soundis Absorb-R Gypline aw, Absorb-R WoodTec Panels and Acoustic fabric paneling systems. The combination of a seamless acoustic spray plaster in conjunction with the dynamic acoustic timber veneer wall slats and acoustic fabric panels brought depth and character to the learning environmentsIncluding sound absorption systems within the large open spaces helps to minimise the amount of noise reverberation, in turn creating a much calmer environment ideal for learning / educational spaces. Soundis are you your stop provider in all absorption solutions, whether it be polyester or cement. Our Absorption range helps our clients to create a calmer environment, without compromising on aesthetics, in fact aiding to the decor.

Floor preparation products donated by F. Ball and Co. Ltd. have enabled an outbuilding to be turned into a therapy room for Jack Tyreman, from Burythorpe in Yorkshire, who was left with severe head injuries after a road accident four years ago when he was 18.The room provides a space with amenities, including an entertainment system and sofa, where Jack can relax and enjoy spending time, with the potential for it to house exercise equipment to assist with rehabilitation in the future.After a botched construction left the original building unusable while exhausting initial funds raised for the project, local tradespeople, including Richard Forbes, owner of Forbes Flooring, stepped up to offer their services for free to complete the project. F. Ball technical representative for the North East, John Rowlands arranged for the donation of flooring installation products. Floorcovering manufacturer Interface also donated LVT and carpet tile floorcoverings.A team of three fitters from Forbes Flooring began the flooring installation by grinding the surface of the new concrete screed to ensure it was suitably smooth. A moisture test indicated that subfloor relative humidity levels were low enough to proceed with the installation without the requirement of a moisture management solution.Contractors then primed the subfloor using P131 general-purpose primer before applying Stopgap Fast-Track 30 levelling compound – the fastest setting levelling compound on the market allows floorcoverings to be installed in as little as 45 minutes after application.Once the levelling compound had cured, a combination of Luxury Vinyl Tiles (LVTs) and carpet tiles was installed over the 40m2 area. Styccobond F46 pressure sensitive adhesive was used to adhere Interface ‘Studio Set’ wood grain LVTs on one half of the room. Styccobond F41 carpet tile tackifier was used to secure Interface graphite-coloured ‘Employ Lines’ carpet tiles. The adhesive dries to a permanently tacky film that will hold loose-lay carpet tiles securely in place when subject to normal foot traffic while allowing them to be lifted and replaced at a later date should they become damaged or worn.Commenting on the project, Richard Forbes said: “At first, we were asked if we would undertake the work for a fee, but we didn’t want any payment for it. Things can be very cutthroat nowadays, and it’s good to be able to look out for other people. I’d like to thank David Edmondson at Interface as well as John Rowlands at F. Ball for supporting the project. Using F. Ball’s Fast-Track 30 meant that we could achieve a quick turnaround, allowing other trades to do what they needed to.”On the benefits of the therapy room for Jack, his mum, Julie, added: “It’s got all the things in it a young lad needs and to help him get on with life, as well as a place to relax on his own and with other people. He loves it.”

When a major blaze swept through the sports pavilion at Verulam School in St. Albans, only one thing was left standing in the changing rooms - the Boyco fittings. Even after the roof had fallen in and flames had gutted the changing block, the Boyco benches and peg rails were still firmly in place. The suspected arson attack at the Sandy Pit Lane site caused extensive damage and the entire pavilion needed rebuilding. As a fire fighter at the scene explained "The pavilion was made of wood and concrete with a tar and bitumen roof so it was pretty flammable".Rebuilding the pavilion had to begin straight away to restore full sports facilities to the school. Boyco was asked to join architects Mouchel on the team tasked with building and fitting out new changing rooms – nine years after they designed and supplied the original fittings. Boyco and Mouchel already had a proven partnership having worked together on numerous projects in the past. The timescale was tight. The Boyco team had just a month to present full proposals and design and manufacture the fittings. The team’s made-to-measure design – a replication of the original one - incorporated benches with integral peg rails and shoe trays. The steel fittings were coated in-house at the Boyco factory using the company’s renowned ‘Hot-dip’ nylon technique, exclusive in this sector to Boyco. The coating, derived from 100% renewable castor oil, is four times thicker than other powder coatings and gives fittings superior durability and performance. ‘Hot-dip’ coated fittings offer astonishing resistance to damage, abrasion and, as Verulam School proved, fire. The surface is also exceptionally hygienic with anti-microbial power that reduces bacteria by 99.99%. For added visual impact, ‘Hot-dip’ designs come in wide range of colours. Timber parts of the fittings also bring together superb performance with impressive environmental credentials. Water-borne timber lacquers provide a high quality finish on our standard American White Ash which are non-toxic, anti-microbial and non-flammable. All timbers are sourced from sustainable, fully approved forests. 

IssueA rental property in Stourport-on-Severn needed a quick refurbishment, allowing the landlord to turn the property around for tenants who were keen to move in. The main areas to be refurbished were the kitchen and bathroom, both of which needed to be fully re-fitted, providing a fresh, clean home for the new residents. ApproachThe landlord had previously worked with Altro products and needed quick to install products, which would provide ease of installation, durability, and ease of cleaning. “We had received information about a new product, Altro Walls ShowerKit, and were keen to try it out. The house needed a quick turnaround as our tenants were waiting to move in. The installer was also keen to have products that were easy to manoeuvre, carry up and down stairs, and resulted in less waste” said S.Birch, Landlord.SolutionAltro Ensemble luxury vinyl tile in colour Pewter Concrete was selected for the kitchen, providing a luxury feel together with comfort underfoot and impact sound reduction.Altro Walls ShowerKit in colour Cool Mineral and Stacked Metro design was selected for the bathroom, partnered with Altro Wood adhesive-free in colour Post Oak. The combination of an Altro floor and wall results in an easy-to-maintain and safe space, giving the bathroom a homely aesthetic, with ease of cleaning and our Altro one in a million slip-resistance reassurance.

The new Engineering Building for The University of the West of England (UWE) is located at the main Frenchay Campus. Designed by multi award-winning architects, AHR, the iconic building will enable the university to deliver its vision for 21st Century engineering and inspire engineers of the future. It has been designed and operated to BIM Level two and aims to achieve a BREEAM Excellent rating. The building will accommodate up to 1,600 students as well as 100 academic and technical staff. The design brief was to create a space which would encourage multi-disciplinary collaborative learning. The outcome is an ideal environment for students to explore, create, and test ideas to change the world for the better.A large central atrium provides a generous space across multiple stepping floor plates which leads to social learning spaces, manufacturing workshops, wind tunnels, laboratories, computer rooms, and computer-aided design (CAD) suites. At the heart of the building there is also a hub for group study which will encourage students and academics to meet and exchange ideas.Lusso atria glazing was installed within the space to allow natural light into the core of the building and visual connection between different areas .  A combination of Lusso 105 framed glazed partitioning and Lusso 25 frameless glazed partitioning has been used for different specification requirements within the space and combine well with the wood and black coated steel beams to achieve an industrial look. 

Located in Davos, Switzerland the InterContinental resort and spa consists of a guest building with 216 rooms, and a separate wood-framed building with 38 luxury condominiums. These two buildings are connected by an underground passage, combining the services of a five-star plus hotel with a private home environment.To experience the uninterrupted views of the Landwasser Valley, the InterContinental resort unleashes fully glazed fronts with extending balconies, taking over 882 ft2. The balconies combine the indoor space with the outdoors, visually merging with each other. Yet, in terms of insulation the thermal separations is made to avoid the effects of thermal bridging. Nestled in the Swiss alpine location, construction had to specifically address the fluctuations in temperature and climate.Insulating and SupportingSchöck Isokorb® was incorporated in the balconies to minimize heat losses between the ceiling and the balcony floor. "We have been working with the Schöck products for many years," says Patrick Hager, co-foreman at the construction company Toneatti that occurs along with Baulink AG as the consortium and total contracting.Residences at Minergie® standard (Swiss equivalent for passive house)"To achieve the high insulation goals in this climate, to even the hidden or seemingly insignificant component is an extremely important role to play," found Regina Meier when choosing Schöck products for the balcony constructions in the Residences. Regina is a construction manager at Baulink AG and responsible for compliance with the specifications. "We can at any time, even in the long term, rely on their reliability and durability."

Twinnell House is an 18 storey residential block of flats in Bristol. SPSenvirowall system which consisted of 4,500m2 of 140mm grey EPS with an acrylic brick slip finish in red nuance and Staffordshire blue and a coloured render was supplied. Once installed, the u-value calculation went from 2.06 W/m²K to 0.23 W/m²K providing residents with a much warmer home and lower energy costs.

The Admiral Quay development comprises of eight high-rise residential blocks offering exceptional views from a prime location. The development contains 520 apartments and restaurant units with associated car parking for 474 cars.An interesting project which combines external steel entry doors, louvre doors and car park access, Admiral’s Quay is an excellent example of the range and breadth of steel door types offered by Strongdor.

Over 1,000 Profile 22 Optima Chamfered Windows have been used in a conversion project in Cheadle Hulme, Cheshire. Sim Chem House in Cheadle Hulme was a six storey office block built in the 1960s. The building had been empty for many years and fallen into disrepair. It was purchased by developers Inspired Homes to be redeveloped into 184 studio, one and two bed ultra-high quality apartments aimed at young homeowners.

The Design Museum and Hollandgreen apartment complex is an exciting new mixed use development in West London, located at the southern end of Holland Park on Kensington High Street. The development consists of three residential blocks grouped around the museum, with accommodation comprising 56 one to five bedroom flats, together with larger individual penthouses. This unusual project combines public sector museum use with super prime private residential living.

Enfield Town Park is a 9.5-hectare green open space in the heart of the Enfield Town, north London. Following a series of consultations with the public and park user groups, works were undertaken in to restore the lake, reinstate public access to it, repair the leaks, and add wildlife friendly features to the area. Furnitubes supplied two types of products to the scheme – concrete Blyth cube seating blocks and Parallel table and bench sets.

The Amiata bath and basins in a bespoke Matt Black finish were chosen to appear on The Block, an Australian home renovations television show.This is a striking and contemporary bathroom, complete with open shower. Although the Amiata bath and basins have been chosen in black, plenty of natural light and reclaimed timber furnishings keeps the room light and relaxed.Supplier: Luxe by DesignPhotographer: Martin PhilbeyDesigner: Charlotte Ekas and Josh Terrett

When you design a building that will be used by lots of people, like a tower block, you need to make sure that the building has the correct level of fire prevention and fire protection equipment. In instances where this isn’t the case, tragedies like the Grenfell Fire can happen. The importance of passive and active fire protection methods are vital for the safety of the intended occupants, but how can you ensure they’re going to be safe?

When you design a building that will be used by lots of people, like a tower block, you need to make sure that the building has the correct level of fire prevention and fire protection equipment. In instances where this isn’t the case, tragedies like the Grenfell Fire can happen. The importance of passive and active fire protection methods are vital for the safety of the intended occupants, but how can you ensure they’re going to be safe?

Award-winning architects Hypostyle were tasked with restoring the original B-listed clock tower and pump house on the Queens Dock in Glasgow.Tobermore Sienna block paving in Silver, Graphite and Sandstone was used to provide the perfect solution for the distillery. The graphite tones in Sienna juxtaposed with the muted colours of the distillery truly create a sense of old and new.In 2018, the distillery was recognised by the Royal Incorporation of Architects Scotland for its Quality In Architecture.

Waterproofing design is a key and critical component for successful construction of below ground structures. Whether it’s a completely new build or making smaller changes to an existing property, waterproofing design should never be overlooked.Waterproofing might account for just a small fraction of a building’s total cost, but waterproofing defects can result in catastrophic consequences. When waterproofing fails, the implications are significant.Delta’s MD, Kevin Dodds was approached to offer advice and guidance on a failed waterproofing system.The existing structure had an impressive 5-level basement which houses: kitchens, food storage and food preparation areas, spa, plant rooms and accommodation. Near to a large river, the site sited well within the water table. The original waterproofing system was based on the secant piled walls and a block wall internally to provide a basic drained protection system with drainage holes at various points to drain to various levels.Over time, the third floor had become completely saturated with all levels of the basement experiencing water ingress in varying levels from damp patches to significant “jets” of water and flows of water through the secant piles.With remediation waterproofing design strategies, it may take some time to specify a suitable system. It is important that investigations are thoroughly carried out by individuals with the capability of diagnosing the defect, assessing the extent of that defect, and recommending a suitable corrective measure.

Lambton House Care Home in County Durham, has taken extreme care in designing a home that caters for the lifestyle of their older generation clients. Creating beautiful décor, relaxing lounges and spacious light living areas which are constantly maintained and cleaned to a high level.With the hygienic concerns that have been magnified with the onset of the COVID-19 pandemic, as part of their infection control improvement projects, Lambton House connected with Yeoman Shield to carry out the replacement of damaged wooden handrails with a PVCu alternative.The wooden handrails not only looked unsightly but were becoming a problem when it came to the care home’s thorough cleaning regime.With the varnish peeling and cracks and dents forming, a perfect haven was being developed for the incubation of bacteria & viruses, that were difficult for cleaning cloths etc. to get into.Yeoman Shield supplied their Guardian 50 mm diameter handrails as a hygienic alternative replacement.Manufactured from a rigid PVCu the handrail is resilient to abrasion and impact damage preventing scratches and scrapes that can promote the growth of bacteria.The warm-to–the-touch circular handrail has a non-porous surface which is easy to clean and can be wiped down with commercial strength cleaner without affecting the colour or finish of the product.Yeoman Shield Guardian 50mm Diameter handrail is available in a choice of colours that easily dovetail into existing or new décor schemes helping to achieve a warm and homely, less sterile, ambience.Lambton House added colour strips, in dementia friendly colours, to sit behind the rails as part of the pathfinding scheme throughout, assisting residents in locating their bedrooms and other services around the building.Lambton House Infection Control Project Manager, Glen Pickering stated“Infection Prevention and Control is of paramount importance to all of us here at Lambton House.“We are delighted to have partnered with Yeoman Shield for the upgrade of our handrails throughout the care home. We have been extremely impressed with Yeoman Shield’s professional approach to working with us. The guidance and support offered to us when we considered an hygienic and dementia friendly handrail solution from their extensive product portfolio was invaluable.“We are absolutely certain we chose the right partner in YS, for this critical project. The results are fantastic.”To complement the Yeoman Shield handrail and colour wall strip Lambton House also installed matching coloured door protection kick plates and PVCu clad glazing bead units. These door products will protect the lower part of the doors from impact damage which can be caused by trolleys, wheeled equipment and the movement of residents and staff around the building.

The ancient printing house of “De Vooruit” in the Center of Ghent, was completely stripped to only the ancient concrete supporting structure. From there the renovation to an ultramodern student home was to be made with steel, providing safe stairways, safe and easy to walk on platforms, as well as outside sitting areas for the students. This was all to be made in aesthetical harmony with other products, such as COR-TEN steel that was used in the project. This to create a modern look, aspiring to the students.The project criteriaPcP had to meet the criteria for a sustainable, durable product which was safe and comfortable to walk on. At the same time, the product needed to blend in well with the COR-TEN steel being used for other parts of the project, providing a modern look that would appeal to students. Another challenge was installing the new steel structure onto the existing concrete supporting structure of the original building.The solutionLannoo Konstruktie chose the OPTIMO® O2, Spiral treads – Type K and panels, as these high-quality products met all the stated requirements for the new student accommodation building. In addition, it was a bonus that the OPTIMO® O2 perforation is easy to walk on in all types of shoes, and is even suitable for outdoor furniture, such as tables and lounge chairs.“The strength-to-weight ratio of the PcP solution is very favourable. This was very helpful for us, as we had to mount the new steel structure onto the old concrete supporting beams. It was important to have a light but very strong panel and steps. PcP was ideal for this purpose.”– Christophe Lannoo, CEO, Lannoo KonstruktieThe resultThe ancient printing house of ‘Dagblad Vooruit’ in the centre of Ghent was completely stripped back to its concrete supporting structure. The structure was then developed to create ultramodern student accommodation using steel with safe stairways, safe and comfortable platforms as well as exterior seating areas for students. This work all harmonised aesthetically with the other building materials, such as the COR-TEN steel used in the project. The aim was to create a modern and inspiring student residence.Architectural steel platform and spiral stair treadsThe project lasted a total of five months from first production to final installation of the panels and steps. In total, 150 spiral K treads were used for three spiral stairs on the three-storey building. More than 100 OPTIMO® O2 treads were installed, together with almost 300 square metres of OPTIMO® O2 panels, both standard and customised. For Lannoo Konstruktie, it was a very attractive project to be engaged in, and likewise for PcP, which is used to projects which are more industrial in nature.

Since 2012, Danish acoustic panel manufacturer Troldtekt has led the way with its sustainable practices and leadership. An early adopter of the Cradle-to-Cradle design concept, the company has focused on its material health, reutilisation, energy, water and social responsibility winning recognition and numerous green awards over the years. The inclusion of FUTURECEM™ within its wood wool panels has further enhanced the manufacturing process, helping Troldtekt further solidify their Cradle-to-Cradle Gold Certification. FUTURECEM sourced from Aalborg Portland exploits the synergies between calcined clay and limestone filler. With this process, much of the burnt clinker in the cement can be replaced resulting in a bonding agent with a much lower carbon footprint. The result means that now, over their product life cycle, the carbon footprint of Troldtekt acoustic panels based on FUTURECEM are 26% lower than that of Troldtekt based on grey cement and 38% lower than that of Troldtekt based on white cement.This innovation, coupled with the company’s sole use of wood from FSC® and PEFC™ managed forests has helped Troldtekt get one step closer to its strict environmental targets. It also further enhances a building’s contributions towards BREEAM, WELL, LEED and DGNB-Certifications.Troldtekt acoustic panels are available in a variety of different structures and colours combining superior sound absorption with award-winning design. The Troldtekt range has a minimum expected life cycle of 50 years coupled with excellent resistance to humidity and tested to meet ball impact standards. The range is available in various sizes and structures, from extreme fine to coarse. They can be supplied as natural wood or finished in almost any RAL or NCS colour. Depending on the panel specified, reaction to fire is classed in accordance with EN 13501 as B-s1,d0 or A2-s1,d0 respectively.

A landmark London entertainment venue is under refurbishment and will feature striking black windows that will not only suit the style and appearance of the Grade II listed building but also meet modern performance criteria for thermal insulation, fire safety, security, and ventilation. The new windows being at installed at Camden’s Koko Club, manufactured by heritage windows specialists Mumford and Wood, use Hodgson Heritage putty to meet performance standards while maintaining a traditional appearance. 

Wood Goldstraw Yorath was faced with a large undertaking when designing the new Bet365 Office Headquarters in Staffordshire. But Tobermore was on hand to help make the job easier with the supply of hard landscaping products suitable for the contemporary new building.The new 13,000 sq. m. base was built on the site of the former Sentinel Newspapers office in Media Way in Stoke-on-Trent and is nearly double the size of the Bet365’s previous headquarters at Festival Park in the area.

DescriptionLocal Smet Supported Partner, a seasoned Lidl Contractor, McCallion Group machine applied the LIDL External Render System onto Poroton blocks externally using as Base Coat: Bauprotec 850 M – Lightweight Lime Cement Render, and as Key Coat: Change of substrate concrete/steel pillar/Poroton block or mass concrete and insulated plinths: Bauprotec RHS Multi-Purpose Render.The internal Render System specification onto Poroton blockwork consists of a base of Coat: Bauprotec 850 M, Lightweight Lime Cement Render, sponge floated in warehouse areas, and skim finished in sales areas. Key Coat: Change of substrate concrete/steel pillar/Poroton block: Bauprotec RHS is used.The Irish LIDL render spec, available from SMET consists of:Bauprotec 850 M is a factory-produced Lightweight Lime Cement Render, specially designed for machine or hand application produced to EN 998-1: 2010 and is CE Marked.Bauprotec RHS is a CE Marked, factory-produced highly polymer-modified render specially designed for hand and machine application produced to EN 998-1: 2010.The special render properties; lightweight, low thermal conductivity, high yield, and the Smet Supported Partner superior technical backup, are key factors in choosing SMET.SMET is committed to delivering consistently superior quality, German-made Render Systems to Lidl Plastering and rendering/plastering contractors across the UK and ROI.  If you’d like to speak to us about your Lidl job – contact SMET.All LIDL spec SMET Render System products are available directly from Smet Building Products Ltd, which ensures the contractor has a superior level of technical backup in the machine application of the LIDL specification.Related DownloadsTDS CASEA Bauprotec 850 M – Lightweight Lime Cement RenderTDS CASEA Bauprotec RHS – Multi-Purpose Render

Fire Retardant aluminium cladding that looks like real timber. This system of real timber that wraps aluminium cladding has been around for 30 years; its not a new phenomenon, in some practices, it’s the norm.Exceptional Architecture with contrasting aluminium wood cladding against a striking white stucco facade. Incredible detailing and accurate installation has made this private residence an iconic statement. Real timber veneer over aluminium results in a contemporary timber cladding, its not an effect, its not plastic… its timber.Aluminium cladding that looks like real timber.Set over three floors and a basement, beautiful landscaped surrounds and many balcony terraces make this dwelling the envy of other property owners. The cladding by Technowood ® has been used to good effect for the wall cladding, soffit board arrangement and also the fascias. This system has many options for start and stop beads with alternatives for reveals and corner detail. The design of these projects is only limited by the designer.Pergola design and Brise Soleilby Technowood®As Technowood have been manufacturing since the 1980’s they are well versed in many different profiles and systems in aluminium covered in real wood. Pergolas that span with a clear run up to 12.5 metres, louvres and Brise Soleil that match. We can create a complete system in timber that looks the same, made at the same time by the same hands… the design can also incorporate powder coated or anodized aluminium elements; supplied at the same time. These are also made in the same manufacturing process.Cladding illumination Up lighting, down lighting or washing warm white illumination across the facade of cladding looks beautiful. Further, this offers a welcome from the building during the darker hours, makes your home more inviting, it also looks stylish. It’s a simple effect to achieve and doesn’t cost a lot in comparison to other illuminated elements of the project.Technowood aluminium timber claddingThe simple system is an inclusive platform of cladding. It starts with a simple L shape bracket, a long length of supporting section T shape (like a timber batten); the cladding directly fixes to it. Think rain screen, when you are designing and you won’t go far wrong. Technowood has been here for 30 years and it’s here to stay. Certified FR A2, FSC and certified for Environmental Product Declaration, its also warranted for 20 years.

IntroductionThe speed of installation and improved build quality of the Keyfix Non-Combustible Cavity Tray System has played an important part in the construction of a major new high-rise residential development in West London and at the same time help meet and exceed regulatory requirements.OverviewLocated close to the Thames in Brentford West London, Verdo – Kew Bridge is a new mixed use development which forms part of a major new regeneration scheme that includes the new community stadium for Brentford FC. Designed by Broadway Malyan and built by developer EcoWorld, it comprises of 487 new one, two and three-bed homes alongside retail and business spaces, public green spaces and community areas.In order to safeguard the future of the development, Keyfix supplied 765 metres of Keyfix Non-Combustible Cavity Trays (NCCT) along with 2490 Corner Units, 4000 Pier Units and 5000 Weeps on blocks E,F,G and H of the development.ChallengeOne of the key challenges for Keyfix was the brickwork build programme which required early completion at the lower grid line levels of one to six. This was due to the scaffolding needed to be stripped away because it was blocking a walkway at Brentford Stadium and therefore needed to be cleared prior to the start of the new football season.SolutionWorking to a tight schedule, the offsite fabrication and preforming of bespoke non-combustible cavity tray units in line with the brickwork set out drawings saved time for the installation team at brickwork contractor DWG. This one-piece NCCT system allowed for a very simple and very efficient install, enabling the brickwork façade to continue at a fast pace.The Keyfix stainless steel NCCT was specified due to its self-supporting system which doesn’t need fixing back to the internal concrete frame and clips together for fast and easy installation. It is essentially a ‘Fix & Forget’ solution with no additional fixings, sealants or onsite fabrication required by the brickwork contractor. Therefore, installation of the trays did not impede the speed of bricklaying even when compared to traditional DPC. Installed in the outer leaf with no connection with the inner skin, this innovative cavity tray system does not create a thermal bridge and eliminates all issues associated with differential movement.Furthermore, the NCCT is manufactured with integral Stop Ends on each cavity tray to ensure water is trapped and channelled outwards via a Keyfix Non-combustible Weep (NCW). The integral Stop Ends also facilitate perp joint width adjustability of +/- 3 mm between 7–13 mm if required.With a lifespan of 125+ years it is the only non-combustible cavity tray system that does not rely on tapes and mastics to make watertight joints, therefore eliminating one of the main reasons for product failure.Commenting on the project, Kieran Coyle, Keyfix Technical Sales Manager said: “Verdo – Kew Bridge was the first project in which we created and used a Component Schedule and this is now the same component schedule template we use on every project. It allows installers to use new Component Codes to identify the different components and install the system to its full integrity.”Holding an A1 Fire Rating, the Keyfix non-combustible cavity tray solution exceeds the minimum standards set out in ADB (Approved Document B), whilst ensuring this major new development meets and exceeds the latest regulations. If the regulations become stricter, it will also be futureproofed maximising the whole-life value of the development.Set to make its mark on West London, Verdo – Kew Bridge is on track for completion, with the Keyfix Non-combustible Cavity Tray meeting the contractors requirements and enabling the creation of a development that has safety built in.For more information about the Keyfix range of non-combustible solutions download the product guide, visit https://keyfix.com/or for technical support call 028 8676 7508 or email info@keyfix.com

Hitachi’s first train factory in Europe is located at Northeast Technology Park (NETPark) County Durham and has been built to support the DfT-led Intercity Express Programme and future Hitachi Rail projects. The 43,000m² development is a central part of an £82m investment to create a state-of-the-art manufacturing hub in the Northeast of England. The decision to manufacture and assemble rolling stock at these premises is a fundamental building block in Hitachi Rail Europe’s strategy for growth.

These intriguing high-quality apartments in Vienna, stand out dramatically from neighbouring blocks – and not just because of their blue, orange, yellow and turquoise finish. The large protruding cantilever balconies are a major feature, made possible by incorporating Schöck Isokorb® T thermal break modules throughout. Their outstanding thermal insulation properties dramatically reducing any thermal energy loss, they also transfer load and maintain full structural integrity.

The £11.6 million regeneration scheme in Aylesbury saw a former MoD site managed by the Homes and Communities Agency (HCA) transformed into an affordable and sustainable housing development, comprising 94 terraced houses and apartment blocks forming a continuous curved building. Named ‘The Serpentine’, this snaking housing project called for a flexible roofing solution! Sika Sarnafil single ply was specified for its flexibility and suitability to tricky detailing but the shape posed a number of technical challenges.

Given the setting of Millmount the choice of external building materials was very important. Lagan Homes wanted to use products and finishes that were aesthetically pleasing, in keeping with the developments surroundings, that were also high quality, durable, maintenance free and cost effective. For those reasons, Lagan Homes chose to use Colinwell Martello Stone Walling on facades and Colinwell’s Allan Block Retaining Wall System for house construction, earth retention andlandscaping purposes.

Hallwell by Hugh McGreevy & Sons Ltd is adevelopment of 100 new homes being constructedas part of a larger residential area in Adamstown,Co. Dublin, Ireland.Included in the scheme are duplex homes andapartments in three- and four-storey blocks due tobe completed in mid-2023.ROCKWOOL presented the benefits of NyRock technology with the latest product, NyRock Cavity Slab 032, demonstrating how it could help to deliver the required fire and thermal performance.

• Location: Thornton House Apartment Tower Block, Birmingham • Contractor: Assured Passive Fire Protection • Challenge: Fire protection required on timber batons around the windows. • Solution: Applying Zeroflame Fire Retardant Treatment on the batons to achieve Class 0 spread of flame and fire propagation as required by building control. Zeroflame Treatment didn't take long to dry between coats, it was very simple to use and it is fully tested and certified for building control.

Tobermore is Westpoint Homes’ choice of paving and walling products for any project where hard landscaping is required as the developer has worked with Tobermore on a huge number of successful housing schemes in recent years. Boclair Gardens features a combination of traditional themed block paving, flags, kerbs, walling and retaining wall products which came together to achieve a stunning finish. The scheme was subsequently nominated for two Scottish Herald Property Awards.

Developed by Willmott Dixon and designed by Corstorphine & Wright as part of Devon & Cornwall’s Police and Crime transformation plan, this state-of-the-art police centre and operational hub is the base for up to 450 officers across the area. The project was developed with the intent to improve custody areas for detainees and provide a comfortable, modern working facility for its staff. During the development of the project, suggestions were taken from custody sergeants to help create a better space for staff and detainees.To provide the facilities necessary for 21st-century policing, attention was paid to integrating assets such as a virtual court system, and technology to monitor the health of vulnerable detainees and allow for crisp, modern meeting spaces that cater for a multitude of police functions.Local suppliers were engaged with the project and through training schemes, the project has been able to offer valuable experience to apprentices. Utilising 314sqm of Solar panels also means this build generates a substantial amount of green energy.Blockleys Synthesis S14 was used to create a strong, dark belt around the building which then blends smoothly into vertical strips of glass and contrasting white facades.

Inspired by and integrated within the natural landscape around it, the River Building at Grace Farms, which was designed by SANAA, gently slopes, bends and ‘pools’ with its surroundings.For a place in which people gather to experience nature, encounter the arts, pursue justice, foster community and explore faith, the use of glass, steel, concrete and wood is particularly fitting. In the building’s bathrooms, d line sanitary ware was used for its simple lines and the natural rawness of its material.

10 George Street rises 37 storeys above Canary Wharf’s new district, Wood Wharf. The balconies of its superb 327 fully furnished apartments overlook waterside gardens and boardwalks below and give exclusive views of London.InterLace designed, manufactured and installed luxury dimout curtains to all bedrooms, with matching shading curtains in living spaces. The resident’s amenity areas are fitted with heat reducing electric solar blinds for maximum comfort.

At the end of 2021 we were approached by a couple looking to build their dream retirement home in Braemar.The client's wished to maximise the main aspect to the West, within the tight width of the site, by creating a double height living room with a glazed gable.The final design consisted of a one-and-a-half story dwelling. The client's also chose to install a Mechanical Ventilation & Heat Recovery and Air Source Heat Pump system, with heating supplemented by a feature wood burning stove.

Accoya was chosen for its long-lasting benefits which are required for demanding coastal settings such as these. Accoya was also selected as the ideal weatherboard material for the Christchurch residence due to its exterior, above ground guarantee of 50 years. Accoya wood was used for all the Bevelback weatherboards which clad the building and are finished using black Dulux matt paint. Accoya was selected as the perfect fit for this type of weatherboarding, which is renowned to combine stability and durability in every project.