"wall finishes internal"

A large number of Decimetric modular stainless steel sinks, from GEC Anderson, were specified for the Environmental Science Laboratory at The University of Liverpools new Central Teaching Laboratories (CTL) for the Faculty of Science and Engineering. The specification called for a high performance and durable solution that was easy to maintain.Decimetric sinks provide a flexible and versatile framework of sizes in 100mm x 100mm increments so as to enable versatility and easy specification. This particular project required large double sink bowls (400 x 400 x 250m deep) set in 1400 x 600mm tops. Each sink was fitted with GEC Anderson V220 Sand Traps to collect solids and to prevent blockages.The bulk of the sinktops were installed on the first floor Environmental Science Laboratory situated in the East Wing. They run the full length of the windowed wall and provide washing facilities for 170 individual work stations.The client demanded high specification of internal fittings and a high concentration of laboratory fittings which would endure heavy usage during their life time. Hard wearing and highly functional, the professional grade brushed satin stainless steel tops provide a long life with very low maintenance. Torsten Bauszus from ADP LLP Architects said, GECA were chosen for their ability to provide modular, professional grade stainless steel tops with no joints at the sink which will make them very easy to clean and maintain.

The ChallengeAs part of this strategy, the decision was taken to replace a fully-glazed non-fire-rated internal atrium with a new, high-performance fire-rated solution to ensure the highest levels of fire protection.Spanning five storeys, the atrium would create a functional yet architecturally stunning light-filled centrepiece within the modern office space.Forming part of the broader regeneration of Dublin Landings, bringing this aspect of the project in on time would be critical.As a result, Walls to Workstations were tasked with removing and replacing the five-floor atrium in just six weeks to see the project through to completion.The SolutionWorking closely with W2W, Pyroguard supplied more than 500 square metres of toughened EI30 fire safety glass to the project. Equipping fabricators with the flexibility to deliver on ambitious architectural projects which require large expanses of glazing, Pyroguard toughened glass provides protection against flames, smoke and radiant heat and delivers impact classification of 1B1 to EN12600.Complementing modern architectural ambitions, the inclusion of large areas of toughened glazing within projects helps to safely incorporate natural light into buildings, something which is critical in renovation projects where buildings are being transformed from their original purpose.In practice, this sees spaces flooded with natural light, elevating levels of light transmission throughout a building and having a positive impact on occupants’ wellbeing – crucial in delivering functional and inspiring workspaces.

Vehicle/Pedestrian safety barriers for the new 627 space, 6 storey car park at the Derriford Hospital in Plymouth.Like many hospitals, Derriford in Plymouth has to match ever-increasing numbers of patients, visitors and staff with limited parking availability. The new 627 space multi-storey car park on the North West Quadrant will go a long way towards easing the situation for the daily 8,000 footfall to the hospital. Part of a 6.6 hectare site being developed by Wharfside Regeneration for Plymouth Hospitals Trust, the new car park was designed by international architects S333 and built by Sir Robert McAlpine Limited.The eco-friendly design features green walls with climbing plants on the two lowest levels, steel latticework on the next two and timber latticework on levels 5 and 6. We recommended our RB1X Spring Steel Buffers that ‘give’ in a collision to absorb impact forces and minimise damage to the barrier, the vehicle and the car park deck that the barrier is mounted on. After an impact, the barrier returns to its original position to provide ongoing protection. Berry Beam rails were used to give a more refined  appearance than the traditional Armco ‘W’ section.A BS 6180 compliant pedestrian handrail was mounted above the barrier on post extensions of 1,100mm high and the space in between filled with anti-climb mesh to stop pedestrians from falling through, or even climbing over the barrier.

As the first Google-designed and owned building outside the United States, the company’s new London headquarters was going to be anything but subtle.Nicknamed the ‘Landscraper’ due to its 11 storeys and planned 330m length (20m longer than The Shard is high), the new headquarters will not only provide an airy working environment for 4,500 employees but also take ‘multi-use’ to a whole new level with cafés, indoor games areas (including a basketball court), a 25m swimming pool, a gym… and a landscaped rooftop garden complete with a running track.This staggeringly ambitious design for a modern workplace right in the heart of London will sit on a plinth of shops and cover 92,000 square metres. Goliath in scope as well as stature, it goes without saying that its blockwork needs are also substantial, with 18,000 square metres of high-strength blocks required.Our Blockwork SolutionA project of this size and scale required blockwork that could bear a heavy load. We were therefore commissioned to provide a variety of products, including our Lignacite blocks.The high density of these blocks gives them significant strength with loadbearing capabilities. For this project, Lyons & Annoot specified Lignacite blocks able to bear loads of up to 7.3N/mm2 (Newton per square millimetre), which are ideal for both internal and external use, above and below ground. They are also well suited to forming partition or separating walls.

Canaan Lane Primary School has been built within the Grange Conservation Area in Edinburgh, an affluent suburb of early Victorian villas. The context of the project therefore called for thoughtful consideration of the neighbouring buildings and the use of a natural palette of materials.The bin store area for refuse and recycling collection occupies a prominent position between the front of the building and the low stone boundary wall to the street. Durability and quality were therefore prime considerations in the choice of product.The wheelie bin stores were made from Italia/100, a robust steel louvred product which provides total visual screening. The double leaf doors were supplied with extra heavy 100×100 SHS posts with base plate fixings to meet the special loading requirement for an environment with small children. A site survey ensured that the hinges were precisely positioned on the posts in a staggered arrangement, to suit the existing slab which was stepped across the rising ground.Each compound was divided with lateral bump rails to accommodate 1100 litre eurobins; in addition the back panel was protected from potential damage by an internal bump rail. Panels and posts were hot-dip galvanized and polyester powder coated RAL7043.Lang+Fulton also supplied Siena fencing around the playground boundaries; a railing fence which provides secure perimeter protection and features a conical top for a smart, traditional appearance.

Canal Architectural were approached to design, manufacture and install luxury feature staircases, balustrades and screens for a commercial space in Bond Street. A leading commercial design company collaborated with the Technical Sales Team to engineer bespoke architectural metalwork for this world class project.The 14,500 sq ft of commercial space in the heart of London was developed to connect its employees and working spaces together over 10 floors. The Zig Zag profile staircase structure and flat bar balustrade featured hidden structural steelwork supports with a site applied bronze effect paint finish. The fully cantilevered stair structure spanned over 6 floors and featured flat bar balustrades and underside soffit panels, all site sprayed in a contemporary bronze effect finish. Another staircase structure spanned over 2 floors and featured hidden structural steelwork supports, wall panels and mild steel flat bar construction.Canal Architectural worked closely with the team to engineer various bespoke items for the development including bespoke planters, balustrades and screens. The entire development was transformed into a contemporary co-working space for the specialist real estate firm.The Canal site team worked closely with the contractor throughout the entire installation process to ensure smooth delivery in line with current building regulations. Canal Architectural are proud to have worked on this extensive redevelopment programme to engineer exquisite architectural metalwork designs for this landmark commercial space.

Designed by architects Studio E, the BREEAM Excellent rated building features over 2,000 Ultima aluminium insulated panels in varying lengths and depths up to 4500mm and 800mm respectively, finished in four different RAL colours The company also supplied a range of ventilated Bird’s Beak style panels, pressings, copings and cills that further added to the overall aesthetic of the building’s façade. The Ultima aluminium insulated panels were designed, supplied and manufactured by Metalline Architectural Fabrications. Metalline has become one of the UK’s leading fabricators of specialist architectural fabrication in the UK, developing innovative solutions for a range of flagship projects. Finished in four different RAL colours – reed green, pastel green, light green and mint turquoise – the overall effect of the multi coloured, multi-dimensional panels is one of inspiration that sits perfectly with the ultimate goals of the Academy’s vision for its pupils future. Metalline’s Ultima aluminium insulated panels are extremely versatile and possess excellent acoustic, thermal and fire performance ratings. They are typically produced using class A1 non-combustible insulation core and can be adapted to fit a variety of facade details, which include the ability to be glazed into a standard curtain walling or structural glazing system. The panels can also be perforated and manufactured into a variety of shapes to meet the most challenging design criteria. Ultima aluminium insulated panels can be fabricated up to an impressive 6000mm in one length.

Designed by Wilson Mason Architects, the ManchesterCancer Research Centre (MCRC) is a state of the artresearch facility, home to 150 researchers.The iconic public facing facility has been designed withan integrated environmental approach. With featuressuch as 85% natural ventilation and rainwater harvesting,the project has earned an ‘Excellent’ BREEAM rating.Allgood were asked to supply an ironmongerypackage that could reflect the sustainable approach,whilst catering for the building’s high performancerequirements.With the MCRC being a partnership between TheChristie, Cancer Research UK and the Universityof Manchester, there is frequent traffic of users. Itwas therefore imperative that Allgood supplied anironmongery package that would perform to the higheststandard. The package was delivered in a co-ordinatedstainless steel finish to match the clean aesthetic ofthe building’s interior. In addition, Modric lever and pullhandles were fitted on the internal doors, providing adurable and high quality product that provides a ten yearwarranty.All of the stainless steel door fittings supplied aremanufactured from 62% recycled materials, of which95% can be recycled at the end of the products life.Manufactured in our factory in Birmingham, the Modricproducts supplied enabled lower carbon emissionsthrough a shorter supply chain, contributing to the‘Excellent’ BREEAM rating of the building.

Specialist refurbishment and planned works contractor AYM Contracting approached EnviroBuild to supply adjustable decking joist supports for a commercial project near Liverpool Street in the heart of London.The 40 m² rooftop office terrace needed a low-maintenance, durable substructure to safely support Hyperion composite deck boards, so it was decided that MESA Support pedestals would be the best product to achieve this.The SolutionWorking with award-winning international construction services company ISG, EnviroBuild fulfilled the order for over 100 MESA support decking feet. The adjustable joist supports were installed under treated timber joists to ensure a long-lasting base and robust foundation.The easy to install pedestals, made with 100% recycled plastic, also come with a 10-year commercial warranty so the client can rest assured that the decking area will be enjoyed for many years to come.The finished result is a wonderful open-plan roof terrace where employees can relax and appreciate the incredible views across central London.Customer FeedbackThe client was pleased with the excellent service and fast delivery which allowed them to install the decking quickly and efficiently.Project DetailsSize: 40 m²Product: Mesa Support Adjustable pedestals Location: Shoreditch, London

In international terms, Billund is a small airport, with only 2.9 million passengers per year, and only Denmark’s second largest, but for children, an extremely important one because it is located close to Legoland and the Lego factory.Billund has direct flights to 40 destinations.

A recent refurbishment by Eureka! The National Children’s Museum in Halifax, West Yorkshire was instigated to redevelop their retail visitor area to expand its offer for visitors. It was an expansion plan that would require 400m2 of high-quality flooring from international flooring specialist Gerflor.

fermacell’s Gypsum Fibreboard panels have saved construction costs for a new school. fermacell® was used to dry-line a new primary school to enable the main contractor, Interserve Construction, the international support services and construction group, to accelerate the construction programme.

This exciting project at Flitwick leisure centre was successfully delivered into the local community. The access and flow requirements of the public building needed to be fully considered during the design phase and a total solution was required for internal and external doorsets... Click on the link below to read more.

Split over basement, ground and three upper floors, the Charles Doll Building on Grape Street, London, offers a contemporary and functional specification in this stunning office refurbishment. The development mixes industrial elements with a crisp modern aesthetic by carefully combining characterful architectural features, including vaulted ceilings with exposed brick and steelwork.Named after its architect Charles Fitzroy Doll, the building is clad in decorative thé-au-lait (“tea with milk”) terracotta – Doll's use of grand façades is understood to have resulted in the expression, ‘all dolled up’. The first floor has been fitted out to a high standard with office furniture from Vitra, providing the perfect space for those who want to move in and get straight to work.The lobby mixes vibrate contemporary wall art with industrial light fittings and brickwork. Forza’s in-house CAD team planned the bespoke black oak Firescreen partition wall to match the architect's design. As a market leading passive fire product, this Firescreen provides both integrity from Smoke and Fire and insulation from heat. This is important because in a fire emergency heat has been shown to ignite secondary fires to items, such as curtains or carpets, that are near the other side of non-insulated partitions.Via the Thinking Space Design & Build, Forza Doors supplied twenty FD30 Fire Doors with stained frames and skirting boards to match throughout the five floors of The Charles Doll Building. Chosen to match the steelwork throughout the development, the dark satin finish of the doors was selected from Forza’s Creato range of dyed veneers. This ‘Illunis’ finish is one of twelve fashionable choices in the range. Dyed veneers are an increasingly popular choice with designers as they offer cost savings over stained veneers without compromising quality.The Doors with glass vision panels, required to allow light through to the stairwells, feature our flush and quirk bead. A minimalist design option where one side of the doors is completely flush right up to the glass vision panel and the other side has a very simple elegant bead detailing.

This housing development required a retaining wall solution but presented challenges in terms of limited space and existing services. Two retaining walls were required at the sides of the entrance to Nicholls Lane housing development. While a Geogrid Reinforced Backfill method was appropriate for the Secura Grand retaining wall on the righthand side of the development, the retaining wall on the left was met with the challenges of limited space and existing services. The highway boundary limited the amount of space available to construct the retaining wall on the left- hand side. The existing services present within the retained soil caused further complexities. On this occasion minimising excavation was crucial due to the services within the retained soil. Efficient use of land was vital as the Secura wall didn’t have the room at the back for geogrid or for no-fines concrete backfill. It was desirable that both walls at the sides of the entrance looked the same despite their different conditions.

Yeoman Shield have recently supplied and installed wall and door protection in the new Urgent Care Unit at Halton Hospital Runcorn.The unit will be busy catering for people in the Runcorn area and is hailed as a one stop shop offering an alternative to A&E for a range of minor injuries and urgent medical care.“The new Urgent Care Unit has been adapted from the old Minor Injuries Unit which has under gone alteration and redecoration with new and refurbished doors fitted. We were keen to protect the new finishes from the damage which can be caused by the everyday use of a busy hospital department.” Said Lee Bushell, Building Surveyor at Warrington & Halton NHS Trust.Yeoman Shield products were installed by their directly employed fixing team to the corridors and cubicle areas in the unit.Guardian Handrail was fitted to protect the walls along the corridors and waiting areas in Aqua Blue with an attractive contrasting insert strip in Mid Grey. An Ultra 60 Protection Rail, also in Aqua Blue, was included at low level to protect the skirting and wall from damage which can be caused at this height from wheelchairs and trolleys.Some of the doors in the unit required replacement and Yeoman Shield fire rated door protection panels and door edge protectors were fitted to all doors to protect from costly damage reoccurring. The addition of Yeoman Shield door protection helped to add uniformity of colour and style to the mixture of the new and old doors.Aqua Blue FalmouthEx wall protection panels were installed along the cubicle area corridors and in the cubicles themselves protecting from damage which is caused by the movement of equipment and trolleys.A Yeoman Shield Clapping Lath was applied to the double swing doors of the X-ray room. The lead lined clapping lath was fitted to the inside of the room doors to prevent any leaking of X-rays through the gap between the meeting edges of the door set.“I am very pleased with the way that the Yeoman Shield products look and from past experience know that these products will help to keep the new unit looking smart for some time to come.” Concluded Mr Bushell.

Every year since 2000 the Serpentine Gallery in London has commissioned a temporary summer pavilion by a leading international architect. Each of these pavilions is situated on top of Ronafix Pre-packed Screed 6-50mm which was installed to provide a thin hard wearing surface.

The combination of a lightweight steel and concrete composite ComFlor® 100 slab and a glulam timber beam structure has helped deliver a truly sustainable three-storey office building. The internal climate in the building is supported with a ComFlor® Active system in the roof slab.

Monk Bridge is new build-to-rent residential scheme in Leeds introduced in 2023. Aspex supplied - PAS24 entrance doorsets – primed doorsets with grey frames, matching internal doorsetsstainless steel ironmongery Novista concealed timber risers.Contractor - Galliford Try

Barrisol® is now part of the internal structure at the Charles de Gaulle, airport Paris. An exceptional luminaires project has been designed by the architects « Unanime ». The modular opening frames, designed in a petal-shape, are made with 110 m² of Barrisol® Translucent ceiling.

Surespan manufactured and supplied over 86 different access hatches including;Hydraulic HIAC coversStainless Steel Internal HIAC coversStainless Steel Roof HatchesThe HIAC hatches were primarily 1800 x 1800mm and were rated FACTA Class ‘B’ vehicle loading. They were hand pump operated via hydraulic cylinders. A further 70+ covers were manufactured in stainless steel to fit 1220 x 1220mm with 50mm and 80mm recesses. The internal HIAC was 600 x 600mm and featured gas spring assistance, 20mm recess for marble and a polished stainless steel top trim.The Roof Hatches supplied were 800 x 900 and 600 x 600mm stainless steel and were fire-rated for up to 2 hours. They were powder-coated RAL 9010. 

An External Distribution Warehouse Heating Solution was required by Sports Direct for their main distribution warehouse facility at Shirebrook, Derbyshire. The warehouse being 156m x 134m x 17m with minimal internal space was an ideal application for TEx air rotation units.A key factor is choosing this technology was that they had already experienced the efficiencies of such product in their other facilities. 2 x TEG41 – Heaters Externally Mounted and 2 x TEG 61 – Destratification Units – Externally Mounted were installed at the facility by Imtech with a BMS Integration and Control system employed.Installation time was less than 2 weeks, including flueing and weatherproofing and now the warehouse at Sports Direct distribution centre has required heating level to keep stock and employees at a adequate temperature. The external installation has allowed for more internal space and the PPC colour of the external units blends into the exterior building design.

Armourcoat polished plaster adds ‘modern luxury’ to the latest J&M Davidson boutique in London’s fashionable Mayfair. The store, for the British leather goods and ready-to-wear label, was created by Universal Design Studio in association with Nicholas Chandor.Part of a Grade II listed property on Mount Street, known for its deep red terracotta period buildings, colour is brought inside with a blush tonality of soft pastels. These feature across two floors to convey the brand's signature colour palette. The focal point of the store is the impressive, cantilevered staircase made from terrazzo marble with a leather-wrapped handrail, set into a series of vertical panels finished in Armuralia polished plaster.Describing the project, Jason Holley of Universal Design Studio said "we chose polished plaster by Armourcoat for the its tactile qualities and its ability to create an exact colour match to the exterior facade,” explains Holley. “With this match we were able to create the dusty pink tone for the feature wall, which gave a dramatic backdrop to the cantilevered staircase. It was also important for us to use only natural, high-quality materials with a long life span". Currently Japan represents over half of J&M Davidson’s business, with the brand planning further stores in Paris and New York.Armuralia is an exquisite silky smooth plaster finish with subtle tonal variations. It is an entirely natural product made from aged lime putty and crushed Bianco Carrara marble and contains almost no VOCs. As a ready mixed marble stucco paste, the material is trowel applied to create smooth or finely textured finishes which resemble polished stone in their appearance, hardness and touch.  Armuralia is available in a range of 24 colours, shades and special effects can also be developed for custom applications. Photography © Charles Hosea

Located just off New York Street in Manchester city centre, Manhattan is a seven-storey development comprising 42 one and two-bedroom apartments. In a New York loft style, each property features floor to ceiling windows and private terraces set into a multi-level garden wall. On the seventh floor, there are duplex penthouses offering views over King Street and across the city. The ground floor also offers 2,000 sq ft of retail space.During several site visits, the original red brick was examined, and the requirements for a blue/black finish was discussed. Using KEIM’s Brick Colour Range, Nicola Young, KEIM’s Senior Colourist, conducted trial applications of KEIM Restauro Lasur, using different opacity ratios, to ensure colour consistency.Once the colour required had been achieved a specification was produced for a four coat KEIM Restauro Lasur system, comprising of two coats of diluted bespoke black base colour in a fairly opaque finish, followed by two further coats of a combination of two differing colours, more heavily diluted.The original red brick front façade of this five storey building was retained and enhanced to reference a more industrial feel. To fulfil the design brief, the client wanted to change in colour of the bricks to blue/black, without the bricks appearing painted.KEIM Restauro Lasur, a low pigmentation silicate colour wash, which acts as a stain that penetrates the surface of the brick, was used to change the colour of the façade, retaining the look and feel of the original bricks. KEIM Restauro Lasur is a breathable, colourfast system, which retains the original brick appearance and increases light reflectivity, whilst retaining a natural looking finish. The beauty of the KEIM Restauro Lasur system is that it can be used to achieve almost any effect without the surface appearing painted.

This outdoor home lift was installed at this stunning stone built house out in the Welsh countryside and is home to a couple that were looking for an accessibility solution after a double knee replacement. The adaptability of the A5000 makes it an ideal choice for an outdoor lift, saving the internal square footage of the home.

This outdoor home lift was installed at this stunning stone built house out in the Welsh countryside and is home to a couple that were looking for an accessibility solution after a double knee replacement. The adaptability of the A5000 makes it an ideal choice for an outdoor lift, saving the internal square footage of the home.

Broomielaw is a major thoroughfare in the City of Glasgow, UK. It runs adjacent to the River Clyde, on its North Bank through the International Financial Services District. Clyde Waterfront is a strategic partnership comprising the Scottish Government, Scottish Enterprise, Glasgow City, Renfrewshire and West Dunbartonshire Councils.