NBS Source
I'm a manufacturer

"iae impact protection"

3,124 results found

Sort by:

Showing 73-108 of 783

Sponsored
IWA 14/PAS 68 HVM Terra Bifold Gate

IWA 14/PAS 68 HVM Terra Bifold Gate

Frontier Pitts Ltd

IWA 14 – 7.2t @ 30mph Introducing the latest Terra Bi-folding Speed Gate which has been successfully impact tested to the International IWA14 Specification, stopping a 7.2 ton vehicle travelling at 30mph (48kph). **** Unique to the market this double leaf HVM Bi-folding Gate impact test resulted in minimal penetration *** This HVM Bi-fold Gate is the perfect solution for any building or perimeter fence line bringing together protection from the threat of VBIED’s (vehicle borne improvised explosive devices) and LPS1175 Security Rated Automatic Gates. Double bi-folding gate leaves Hinged Gates leaves can be automated with Actuators.
Sponsored
Dublin Landings, Ireland - Pyroguard Protect

Dublin Landings, Ireland - Pyroguard Protect

Pyroguard UK Ltd

The ChallengeAs part of this strategy, the decision was taken to replace a fully-glazed non-fire-rated internal atrium with a new, high-performance fire-rated solution to ensure the highest levels of fire protection.Spanning five storeys, the atrium would create a functional yet architecturally stunning light-filled centrepiece within the modern office space.Forming part of the broader regeneration of Dublin Landings, bringing this aspect of the project in on time would be critical.As a result, Walls to Workstations were tasked with removing and replacing the five-floor atrium in just six weeks to see the project through to completion.The SolutionWorking closely with W2W, Pyroguard supplied more than 500 square metres of toughened EI30 fire safety glass to the project. Equipping fabricators with the flexibility to deliver on ambitious architectural projects which require large expanses of glazing, Pyroguard toughened glass provides protection against flames, smoke and radiant heat and delivers impact classification of 1B1 to EN12600.Complementing modern architectural ambitions, the inclusion of large areas of toughened glazing within projects helps to safely incorporate natural light into buildings, something which is critical in renovation projects where buildings are being transformed from their original purpose.In practice, this sees spaces flooded with natural light, elevating levels of light transmission throughout a building and having a positive impact on occupants’ wellbeing – crucial in delivering functional and inspiring workspaces.
Sponsored
Tours Duo, Paris - Pyroguard Protect

Tours Duo, Paris - Pyroguard Protect

Pyroguard UK Ltd

The ChallengeInstalled within the reception hall and circulation areas of the two towers, Pyroguard Protect, which was chosen by fire protection specialists, Pyrometal, has helped architect Ateliers Jean Nouvel achieve his ambitious vision, without compromising on safety.Following the successful testing, Pyroguard Protect was installed throughout DUO-1 and DUO-2.In the reception hall, Pyroguard Protect EI120 was fitted inside PYROTEK steel profiles to form full height glass partitions and in the circulation areas on each floor, around 690 square metres of E30 was used inside double-leaf doors with EI60 glass partitions.The same was also used in the corridor doors as a means of compartmentation, which connects various areas to the stairs and lift landings.The SolutionTours Duo rises on a former industrial site on the edge of the River Seine in the Paris Rive Gauche district and at 180 m, DUO-1 is set to be the third tallest building in the capital.The pair of towers, DUO-1 and DUO-2, which lean to form an impressive asymmetrical ‘V’, will house offices, retail spaces, restaurants, a hotel and a top floor panoramic bar.In the design of the mixed-use scheme, Ateliers Jean Nouvel was tasked to create high performing, aesthetically striking buildings and as such, decided to take a bioclimatic approach to reduce energy use and make the most of the outdoor weather conditions.Giving the best protection for people and property, Pyroguard Protect provides integrity and heat insulation for 30 to 180 minutes (EI classification).The solution also provides 1B1 impact classification without the need for additional counterpanes, high performing acoustic properties and peace of mind throughout the lifespan of the product due to its UV stability.
Sponsored
Rubio Monocoat - Your Partner in Wood Protection

Rubio Monocoat - Your Partner in Wood Protection

Rubio Monocoat UK

It’s time to change the way we finish and protect our interior and exterior wood forever. We are now live on NBS - a platform, which enables architects and specifiers to easily find the products that are perfect for the projects they're working on.Rubio Monocoat provide environmentally friendly interior and exterior oils for wood preservation. With 0% VOCs and the environmental credentials to back it up, we really are the future of wood staining and protection.Who are Rubio Monocoat?Born and based in Belgium, we have expanded over the globe and into the UK and Ireland. In 2000, the company started with the development of an oil, based on a revolutionary technology called molecular bonding, conducted by Dr. George Barrell. This innovative technology has played a huge part in the success of our products.Molecular Bonding is the process of the oil adhering with the fibres of the wood. Within a couple of minutes, the oil has bonded with the upper microns in the wood, meaning no film formation or saturation. The innovative technology means wood is protected in just one single layer.The environmental credentialsRubio Monocoat products contain no VOCs (volatile organic compounds) or harmful chemicals that emit into the air or come into contact with your skin. Three years before the introduction of the first VOC regulations, we decided to set a high bar and go for a 0% VOC label. As a company, we are dedicated to looking for environmentally friendly solutions and strive with the utmost care to provide products with high quality and standards.Rubio Monocoat is the first in the wood treatment sector to get the Eurofins Indoor Air Comfort Gold label. Eurofins Indoor Air Comfort Gold is a sign of our focus on quality and contribution to a healthy indoor environment. The label combines the most relevant emission specifications and requirements in one certification. The Indoor Air Comfort Gold label shows compliance with specifications on VOC emissions set out globally. As well as having these incredible certificates to our name, our products are also food safe and toy friendly. We also have the M1 Emission Class for Building Material certification and are EPD (Environmental Product Declaration) certified, meaning we are transparent with the information surrounding the life-cycle and environmental impact of our products. Why are Rubio Monocoat launching on NBS?At Rubio Monocoat, we know architects could benefit from everything our oils have to offer from staining and protecting cladding, to refreshing interior wood panelling. It’s an industry we have only just touched the surface of, but with our environmental credentials, efficient application process and high quality finish, we know we’d be a great addition to any wooden project.With NBS, architects are able to browse our environmentally friendly interior and exterior products, read case studies from all over the world and locate all our certifications, literature on safety, and technical data sheets. It's also the perfect place to keep up with projects from around the globe to find inspiration. This is a huge step for Rubio Monocoat into a market that we've always highly valued and we look forward to providing architects and specifiers with expert advice on our 0% VOC products. Are you interested in a workshop near you?We’re looking to hold workshops for architects and specifiers who want to learn everything about what Rubio Monocoat can offer them and their projects. These will involve demos and the chance to get hands-on. If you’re interested, please register here, making sure to state the town you’d like us to come to: https://form.jotform.com/221983606853363You can contact our Business Development Manager Derek at consult@rubiomonocoat.com for more information or a demonstration on our products, and see us live on NBS now: https://nbs.fyi/gwuq8i
Sponsored
Trief Kerbs used to protect major South Yorkshire Distribution Centre.

Trief Kerbs used to protect major South Yorkshire Distribution Centre.

Brett Landscaping

The £50million development is situated on the Doncaster iPort logistics estate, and is the hub for more than 53 supermarket stores based across South Yorkshire, the Midlands and Lincolnshire. With more than 3,900 pallets leaving the site via HGV each day 2,500 Trief GST2A kerb were installed to the perimeter of the large distribution centre building, site entrance points and security booths to protect them against accidental vehicle impacts damaging the structures. To view the full case study please click the link below.
Sponsored
Wall Protection - Leicester Royal Infirmary

Wall Protection - Leicester Royal Infirmary

Gradus

Gradus has supplied and installed a range of wall protectionsolutions at the East Midlands Congenital Heart Centre, helping to create an engaging, child-friendly atmosphere while making the building interior more hygienic, easier to clean and cheaper to maintain.The Gradus products installed include SureProtect Design wall cladding, finished with a bespoke printed design that shows a cartoon solar system to give the corridors a different feel to the wider hospital environment. The bespoke design is printed onto the back of a clear textured sheet meaning the cladding is easy to clean and features a textured surface to conceal the effects of impact and abrasion.Elsewhere in the hospital, Gradus installed its SureProtect Endure protective wall cladding, a durable layer of wall protection that is through-coloured and textured so surface damage does not show.Standard corner guards have also been installed, offering acost-effective solution to protect vulnerable corners, as well as door frame protectors also made from SureProtect Endure. All have been carefully positioned to provide maximum protection against the constant stream of pedestrian and wheeled traffic that hospitals experience.Gradus provided Leicester Royal Infirmary with its supply and fit service, which sees the dedicated Gradus Contracts Team take the project from initial survey to design, manufacture and through to installation.
Sponsored
Concrete Basement Gas Protection

Concrete Basement Gas Protection

Newton Waterproofing Systems

Leafy Windlesham in Surrey was the location for this 5-bedroom, £15,000,000 mansion by Searchfield Homes, complete with a 4-metre deep basement containing a swimming pool and spa pool, all of which needed to be protected from water ingress and ground gases.
Sponsored
Wall Protection - The Halcon Centre

Wall Protection - The Halcon Centre

Gradus

Located near Taunton, Somerset, the Halcon Centre provides short breaks, with 24-hour professional care, for up to 18 adults who are physically disabled or have sensory loss. SureProtect Design® bespoke wall cladding was installed in the main corridor at the centre featuring a row of imitation panels, that have been designed to look hand-drawn with a marker pen to offer the homely feel the centre was looking for. In addition, the Halcon Centre further increased the corridor walls’ protection by installing Gradus’s CGH5090 High Impact PVC-u Corner Guards and WGS200 Wall Guards, both in colour Gravel.
Sponsored
Impactful yet adaptable design

Impactful yet adaptable design

Autex Acoustics Ltd

Leveraging innovative acoustics for timeless solutionsThe projectHaving been engaged to refurbish their client’s London office, tp bennett was tasked with designing a new town hall zone within the existing space. The aim was to introduce an impactful new breakout area that maintained the high-quality, timeless aesthetic of the office without compromising acoustic comfort.The challenge Being accustomed to what was previously a high-quality office, the scope of the refurbishment was to preserve the design intent of the original fit-out whilst incorporating interventions designed to improve and future-proof the space for an agile working environment. It was imperative that the new elements were seamlessly translated from the old design into the new space as if they had always been there. However, being a live office environment, there was difficulty in accurately determining the available room for acoustic treatment. Given the changing design requirements and the building’s standard Category A accessible ceiling tiles, adaptability was essential.The solutionThe Frontier™ Axis grid system was the logical choice for the project. Aside from reducing sound reverberation and being a striking visual feature, the flexible nature of the system meant it withstood updates and changes without affecting the aesthetic or necessitating more difficult, expensive, or less effective options. During site work, the grid could be manufactured and adjusted to maximise plank height without requiring local cut-outs for structural elements or services. This allowed for a seamless grid installation even with complex MEP and structural components. The ability to adapt the grid’s measurements also facilitated even distribution of pendant lighting and air diffusers. The possibility of adding accessible sections to the grid made it much easier for the MEP consultant to locate additional fan coil units just above the grid – a more accessible alternative to the consultant having to follow the cell size and locations or adjust the grid to the unit positions. In keeping with the client’s desire for a warm, deep, natural colour palette, the Frontier system was locally manufactured in Cube™ Sargazo to complement the existing earthy brass shades within the otherwise minimalistic design.The resultBeyond the inherent acoustic benefits of the installation, the collaboration between tp bennett and the Autex Acoustics team was a resounding success, exemplifying adaptability, flexibility, and thoughtful design. Our capacity to provide comprehensive tools and information about the product application and our design support on-site, assisting with grid reconfigurations required during the design process, proved invaluable. Likewise, the flat-pack, lightweight nature of the product facilitated easy delivery and storage until installation, streamlining the construction process. The innovative and cost-effective nature of the Frontier system ensured that tp bennett could maintain the client’s initial choice despite ongoing modifications.
Sponsored
Introduction of protective covers contributing to long-term decline in false fire alarms

Introduction of protective covers contributing to long-term decline in false fire alarms

Safety Technology International Ltd

Recent Home Office research and analysis of ‘trends in fire false alarms and fire alarm policies’ reported a decline in false fire alarms caused by malicious or accidental activation of manual call points due to the introduction of protective covers.Still every false fire alarm remains costly, disrupting schools and businesses, placing unnecessary strain on our emergency services, and reducing the public’s faith in fire alarms.Continuing to be the largest incident type, false fire alarms accounted for 42% of the incidents attended by fire and rescue services in England year ending September 2023 – fires accounted for 24%.Home Office figures show that there was a total of 3,030 false fire alarms caused by the “malicious activation of [a] fire call point/alarm” in England during the 12-month period, surpassing challenged hoax calls as the largest reason for malicious false alarms.Accidental activation remained a significant contributor, 15,609 false alarms were recorded due to the accidental and careless activation of life safety devices, including manual call points.With similar figures reflected across the UK, over £1 billion is lost every year due to false alarms.To recoup this cost, North Yorkshire Fire and Rescue Service joined the London Fire Brigade in recovering costs from hospitals, airport and student halls with a poor false alarm record.Dangerously, false fire alarms divert fire crews away from real emergencies; creating unnecessary risk as crews travel at high speed to attend ‘emergency’ calls. The ‘crying wolf’ factor caused by frequent false alarms causes staff to become complacent and less willing to act quickly when an alarm activates.The Scottish Fire and Rescue Service recently changed the way its firefighters respond to automatic fire alarms in commercial premises to reduce unnecessary call outs from unwanted fire alarm signals.However, the reduction of unwanted fire alarm signals to fire and rescue services does not necessarily reduce false fire alarms and therefore may leave fire safety issues unaddressed. This may not only lead to disruption for businesses, but also to alarm fatigue for the occupants – conversely, successfully reducing false alarms will also reduce unwanted fire alarm signals.Repeated false alarms reduce the public’s confidence in fire alarms, contributing to alarm fatigue and a complacent attitude toward evacuations. Alarm fatigue occurs when a person becomes desensitised to an alarm due to repeated false alarms and consequently fails to react appropriately in a real emergency.As recommended in BS 5839-1:2017, manual call points can be fitted with a protective cover to prevent false fire alarms. The British Standard Institute recommends in section 20.2b, that: “All MCPs should be fitted with a protective cover, which is moved to gain access to the frangible element.“It is now recommended that a protective cover is fitted to a Type A manual call point to help prevent false alarms.”Consequently, Home Office research examining the long-term trends in false fire alarms found that the introduction of protective covers was a contributing factor in the decline of false fire alarms caused by malicious or accidental activation of manual call points.As the original call point cover manufacturer, Safety Technology International produce a range of protective covers, specifically designed to prevent false alarms whether accidental or malicious.The STI story began in 1980 with a challenge by a school headteacher who wanted to stop their false fire alarms. Founder, Jack Taylor, used his expertise in security systems to invent the first and original Stopper® polycarbonate protective cover. From low profile covers to outdoor and sounder models, there are variations to suit all applications.The tamper-proof polycarbonate covers ensure call points are protected without restricting legitimate use in a real emergency, a combination of optional warning alarm, flashing beacon and break seal acts as a deterrent against malicious activation.
Sponsored
Hempel, trusted to protect wind turbines around the world

Hempel, trusted to protect wind turbines around the world

Hempel A/S

Standing at an impressive 140 metres high, Vestas’ wind turbine stands at the Danish National Test Centre for large wind turbines, where it is producing electricity for around 7,500 homes. The impressive structure – which has a rotor area the size of three football fields – needs a robust coating system to protect it from the corrosive saltwater atmosphere. As a long-standing Vestas supplier and development partner, it was natural that Vestas ask us to provide a protective coating system for the V-164 8.0 MW prototype.Due to the tower’s size, special vehicles are required to move the pieces. As well as anti-corrosive protection, the coating system has to deliver excellent abrasion resistance in order to protect the tower during transport and installation. Vestas chose to use our standard protective coating system for wind turbines, which is proven to deliver excellent anti-corrosion performance, robust abrasion resistance and lasting weather and UV resistance.Vestas chose a highly durable protective coating system for both the interior and exterior surfaces. The exterior surface is categorised as C5-I (high) according to ISO 12944, and our coating system comprised Hempadur 4774A, a self-priming high-build epoxy, followed by a layer of Hempathane HS 5561B, a two-component, aliphatic polyurethane finish. The internal surfaces have a lower corrosive categorisation and were coated with two layers of Hempadur 4774A.
Sponsored
Only a functioning smoke alarm can protect you

Only a functioning smoke alarm can protect you

Safety Technology International Ltd

Protecting detection systems is vital to fire safety with only a functioning smoke alarm able to protect you in an emergency.Landlord regulations and Government policesLandlords have responsibilities to keep tenants safe in their properties by providing functioning life safety equipment.Regulations introduced in 2015 require private sector landlords to ensure they ‘have at least one smoke alarm installed on every storey of their properties’ as a legal requirement.There is also a proposed change to this regulation, coming into effect later this year, which will mean social housing is also included, making it mandatory that all rented accommodation must have working smoke alarms fitted. It will also be compulsory for landlords to repair or replace any faulty alarms as soon as they are made aware of defects.Fines up to £5000To protect their tenant, it is the landlord’s responsibility to ensure detectors are fitted and working at the start of every new tenancy agreement. Failure to comply with The Smoke and Carbon Monoxide Alarm Regulations introduced in 2015 can result in a hefty fine of up to £5000.One exasperated landlord wrote online that in one of his properties “Two of the detector heads have been tampered with, presumably so that the tenants can smoke in their rooms”. Consequently, this had been causing false fire alarms and it is up to the landlord to repair or replace the alarm.In some extreme cases, landlords have discovered that smoke alarms have been removed all together from properties, due to disturbances when cooking, smoking, etc. It is then up to the landlord to replace the alarm, and so it is advisable to invest in measures to prevent the alarms removal; some recommendations have been made in government legislations such as BS 5839-6:2019.Ultimately, landlords should feel obligated to ensure regular testing of smoke alarms and the replacement of batteries in their properties to reduce the risk of void insurance or a remedial notice. Simply testing smoke alarms can also help to prevent any danger to tenants and damage to properties should a fire occur.BS 5839-6:2019The latest recommendations in BS 5839-6:2019 are primarily concerned with saving lives and reducing injuries caused by fire, but also covers reducing property damage, which can be extremely costly to landlords in the case of fires.The guidance in BS 5839-6:2019 suggests that in environments such as HMOs, where multiple occupants can be disturbed by false alarms, landlords could alter their smoke alarms systems to have delays before the signal is sent to all tenants for the occupier to investigate the cause. This can help to reduce complacency during false fire alarms or the temptation to dangerously compromise smoke alarms.The recommendation also states that landlords should seek alternative smoke alarms that can alert to intervention or disablement of the alarm in the event of tenants continually tampering.Tenants’ responsibilityAlthough it is the landlords legal duty to provide working smoke alarms in all properties, tenants must not tamper with smoke alarm, remove them, cover them up or in any other way damage or prevent them from operating in their intended manner. Failure to comply with this could result in the tenant facing a substantial fine, or termination of their tenancy agreement.It falls to the tenants to take their own safety into consideration and should contact landlords if there are any issues with smoke alarms, such as false fire alarms, so their landlord can test and replace the batteries, or alarms themselves if necessary. Preventing alarms from effectively detecting fires can result in fatal incidents and also fines for misconduct falling to the tenants.One student at Edinburgh University covered the smoke alarm in his room with bubble wrap whilst living in student accommodation. Preventing the smoke detector from working effectively proved a dangerous mistake when a fire started in his room and he had to be pulled to safety after being found struggling to escape the flames while the building was being evacuated. As a consequence for this reckless behaviour, he was fined and ordered to pay £1000 in compensation after being arrested and pleading guilty.Steel Web Stoppers®  Safety Technology International is a specialist manufacturer of a range of fire, safety and security products; their wire cages help to prevent tampering with essential life safety equipment, such as smoke alarms.STI’s Steel Web Stoppers®  are designed to protect against vandalism, misuse and damage to smoke and fire detectors. Constructed from plastic coated, heavy-duty galvanised steel rod, the Steel Web Stoppers can withstand the severest of abuse from vandalism or accidental damage. It also prevents tampering with the alarm, without hindering legitimate use, therefore still allowing the landlord to service the device and replace batteries when appropriate.
Sponsored
Thornton House, Birmingham

Thornton House, Birmingham

Zeroflame

• Location: Thornton House Apartment Tower Block, Birmingham • Contractor: Assured Passive Fire Protection • Challenge: Fire protection required on timber batons around the windows. • Solution: Applying Zeroflame Fire Retardant Treatment on the batons to achieve Class 0 spread of flame and fire propagation as required by building control. Zeroflame Treatment didn't take long to dry between coats, it was very simple to use and it is fully tested and certified for building control.
Sponsored
The dangers of fire alarm fatigue and how to combat false alarms

The dangers of fire alarm fatigue and how to combat false alarms

Safety Technology International Ltd

Alarm fatigue occurs when a person becomes desensitised to an alarm due to repeated false alarms and consequently fails to react appropriately in an emergency.Every false fire alarm is costly, disrupting schools and businesses, placing unnecessary strain on our emergency services, and reducing the public’s faith in fire alarms.A false fire alarm is: any fire alarm signal other than a genuine fire or signal test. The cause of these false fire alarms can be as a result of human behaviour, either good intent or malicious, or due to apparatus.‘Good intent’ are calls made in good faith with the belief that there really is a fire, for instance a customer in a shop sees what they believe to be smoke and activates a manual call point.Conversely, ‘malicious’ activations are made with the intention of getting the fire and rescue service to attend a non-existent incident, for example when someone breaks the glass of a manual call point despite knowing there is no fire.‘Due to apparatus’ false alarms are incidents initiated by a fire alarm and fire-fighting equipment activating, such as by burnt toast or steam in a kitchen.Continuing to be the largest incident type, false fire alarms accounted for 39 per cent of the incidents attended by fire and rescue services in England in 2022 – fires accounted for 29 per cent.With similar figures reflected throughout the Home Nations, over £1 billion is lost every year in the UK due to false fire alarms.To recoup this cost, North Yorkshire Fire and Rescue Service joined the London Fire Brigade in recovering costs from hospitals, airports and student halls with a poor false alarm record.The Scottish Fire and Rescue Service recently changed the way their firefighters respond to automatic fire alarms in commercial premises to reduce unnecessary call outs from unwanted fire alarm signals.However, the reduction of unwanted fire alarm signals to fire and rescue services does not necessarily reduce false fire alarms and therefore may leave fire safety issues unaddressed. This may not only lead to disruption for businesses, but also to alarm fatigue for the occupants – successfully reducing false alarms, will also reduce unwanted fire alarm signals.Why are false fire alarms dangerous?Fire crews should be at real emergencies – where they could be saving lives.The ‘crying wolf’ factor – frequent false alarms in a building cause staff to become complacent and less willing to act quickly when the alarm activates.Unnecessary risk – fire crews travel at high speed to attend ‘emergency’ calls and accidents can happen. False alarms put the public and crews at unnecessary risk.The ‘crying wolf’ factor of false fire alarms creates complacency that delays evacuation and can prove fatal in a real emergency.From the UK to the UAE, alarm fatigue is an international issue. Fires at the Marina Torch in Dubai demonstrated the threat of alarm fatigue; engulfed by flames twice in two years, on both occasions residents believed the signal that was there to protect them was a false alarm.At this year’s Women’s World Cup in New Zealand, a fire alarm sounded for several minutes at the match between the USA and Portugal. Despite the alarm, and voice alert urging fans to find their nearest exit, stands were not evacuated and play continued on the field – only later was it declared a false alarm.The major fire at the Bolton Cube student accommodation also served as a stark reminder of the deadly impact of alarm fatigue; residents ignored the fire alarm as the blaze burned through the block of student flats because fire alarms would sound “almost every day.”The issue of alarm fatigue was recognised in the Incident Report by Greater Manchester Fire and Rescue Service: “It was reported subsequent to the fire that some residents of The Cube did not immediately respond to the fire alarm as ‘…it goes off all the time…’. This perception has the potential to delay an appropriate response, and hence the ability to safely move to a place of safety.”Tragically, not every student who falls victim to alarm fatigue is so lucky. Three students died and 62 others were injured after a fire at residential halls at Seton Hall University in New Jersey, USA. Authorities said students fatally delayed leaving the dorms after a series of recent false alarms had “lulled them into a false sense of security.”Whether accidental or malicious, there are measures that can be taken to reduce the number of false fire alarms and suppress the threat of alarm fatigue.Key steps to reduce false alarms:Reviewing your Fire Safety Risk Assessment and keeping a log of all false alarms to identify any trends which should be raised with your alarm engineers.Creating an action plan to reduce the chance of any false alarm occurring.Check detector types and their locations – would moving detectors or changing the type used reduce activations? Seek advice from your alarm engineer.Upgrading automatic fire detection (AFD) systems that are obsolete with more modern technology e.g. ‘multi-sensing’ detectors.Fitting manual call points with protective covers in problem, vulnerable or high traffic areas.Ascertaining whether any false alarms are a result of activating the wrong call points such as green emergency door release points.Keeping AFD systems appropriately maintained.Considering whether a link to an Alarm Receiving Centre is necessary or if it is appropriate to suspend the automatic dialling function whilst buildings are occupied or at certain times of the day.Seeking further guidance and advice from their alarm system provider or servicing agent as well as their local legislative fire safety officer.As recommended in BS 5839-1:2017, manual call points can be fitted with a protective cover to prevent false fire alarms. The British Standard Institute recommends in section 20.2b, that: “All MCPs should be fitted with a protective cover, which is moved to gain access to the frangible element.“It is now recommended that a protective cover is fitted to a Type A manual call point to help prevent false alarms.”Recent Home Office research and analysis of ‘trends in fire false alarms and fire false alarm policies’ reported a decline in false fire alarms caused by malicious or accidental activation of manual call points due to the introduction of protective covers.Safety Technology International manufacture a range of protective covers, from integral covers to outdoor and sounder models; there are variations to suit all applications. These covers are specifically designed to protect manual call points from false fire alarms.
Sponsored
Protection Board - London Aquarium

Protection Board - London Aquarium

Wallbarn Ltd

The contractor was relaying a waterproof membrane immediately above the London Aquarium and naturally the client was concerned about leaks with such precious livestock beneath. The waterproofing was torch-on bituminous felt membrane, due to be covered with road grade asphalt. Protecto-board was laid onto the waterproofing and secured with tape. It was cut to shape around the curbs cleanly and effectively without leaving vulnerable areas and without delaminating or crumbling, or leaching bitumen. It protected the waterproofing from temporary construction process damage and permanently protected it when covered with hot road grade asphalt afterwards
Sponsored
ZAUN HOCKEY SOLUTION HAS NO NOCKERS

ZAUN HOCKEY SOLUTION HAS NO NOCKERS

Zaun Limited

Leading English National Premier League side Cannock Hockey Club were fed up with the high maintenance costs of replacing nets and wooden boards damaged by constant ball impacts.So they wanted lower maintenance perimeter fencing when they upgraded their pitches in 2009 – and ideally to limit the noise of the wooden boards under constant impact from 5.5oz balls travelling at speeds in excess of 80mph which was affecting the experience for players and spectators alike.The SolutionFounded in 1905, ‘The Nockers’ is one of the most successful National Premier League hockey clubs in the country, having won the title seven times since the league’s inception 25 seasons ago.But their traditional wooden perimeter boards were effectively sacrificial under hockey’s cannonball-like impacts. As they quickly broke and got worn out, the club was in a constant and expensive cycle of buying and installing new ones.The grounds committee turned to Zaun as a development partner to create a ground-breaking low-noise and -maintenance metal fence perimeter.It replaces nets and wooden boards with twin wire mesh fencing. Fixings every 200mm and rubber EPDM inserts at each fixing virtually eliminate rattle during play.The bottom 210mm – or up to 400mm behind the goals – uses twin horizontal 8mm wires in a close 25x50mm mesh pattern that reduces significantly the noise while withstanding a far greater number of ball impacts without damage.The system is then topped with Zaun’s Super Rebound, which gives better viewing, no risk of player or spectator injury from splinters or mid-rails and no solid surface for vandals to graffiti.
Sponsored
SYSTEMGLAS® Ligna provides assured fire protection for timber framed butt-jointed glazing

SYSTEMGLAS® Ligna provides assured fire protection for timber framed butt-jointed glazing

Promat UK

Designing, specifying and installing fire rated timber framed butt-jointed glazing is now easier with the assurance of a fully traceable supply chain with the launch of SYSTEMGLAS® Ligna by Promat, one of the country’s leading manufacturers of fire, thermal and acoustic solutions. Ligna gives designers the ideal balance of assured fire protection and maximum light transmission in all kinds of timber framed glazed partitions and screens. Ideal for offices, healthcare, education, retail and public sector applications, it has been tested to provide integrity and insulation (EI) fire protection from 30 minutes up to 60 minutes (EI30 to EI60).
Sponsored
Protecting millions of visitors at Park of Poland

Protecting millions of visitors at Park of Poland

Hempel A/S

Park of Poland is one of Europe’s premier holiday centres. Located in Wręcza, around 60 kilometres from Warsaw, the park offers a range of attractions, including an indoor water park, theme parks and other facilities such as hotels, bungalows, office spaces and apartment buildings. Park of Poland was completed at the end of 2019 and is expected to attract millions of visitors each year.Our coatings protect all 4,500 tons of structural steel at Park of Poland and include a high-quality passive fire protection system based on our intumescent coating Hempacore One FD to improve safety for visitors and staff. Applied to the structural steel, Hempacore One FD will expand if exposed to high heat, insulating the steel beneath. In a fire, this will extend the steel’s load-bearing capacity for up to three hours.
Sponsored
STI protect vital life safety equipment with donation to local care farm

STI protect vital life safety equipment with donation to local care farm

Safety Technology International Ltd

Safety Technology International have donated protective covers to help a local community charity with false alarms at a time when they need it most.Wildgoose Rural Training is a charitable care farm in Hallow, just outside of Worcester, that supports adults and young people with a variety of learning disabilities.Starting in 2000 with just a handful of students, Wildgoose has grown into a 42-acre site with a thriving 6-acre farm where students from all backgrounds can learn horticulture, animal care, woodworking, arts and crafts, and carry out conservation work.Wildgoose supports students in a ‘happy and inclusive family atmosphere’ and focuses on teaching practical and meaningful land-based skills.One student had recently taken a liking to setting off the fire alarms in the main building at Wildgoose, resulting in frequent unnecessary evacuations.Not only did this cause a great deal of upheaval in having to evacuate the students from their buildings to the fire assemble points, but in students with sensory sensitivity and hearing issues these fire alarms caused a great deal of distress, panic and shock.On contact with STI, Wildgoose were recommended the Euro Stopper® call point covers with a sounder alarm to discourage the student from setting off the fire alarm. The protective covers were duly installed over the call points in their main building to prevent accidental or malicious tampering with the fire alarm without restricting legitimate operation in an emergency.Managing director of Wildgoose Rural Training Centre, Jim Hidderley said: “The call point covers provided by STI have reduced our regular false fire alarms from a weekly occurrence down to 0, the covers with sounders prove to be a sufficient deterrent from any mischievous hands.”“More importantly, the cover has ensured that our students are not put under any stress that is unwarranted due to false fire alarm triggering”The Euro Stopper® is a tough polycarbonate cover that can withstand the toughest of knocks and has an optional 96dB integral sounder that draws immediate attention to the area to dissuade unwanted activation of call points, therefore reducing false fire alarms.
Sponsored
False fire alarms on the rise across NHS Trusts

False fire alarms on the rise across NHS Trusts

Safety Technology International Ltd

False fire alarms have risen by nearly 16% in just 6 years at NHS trusts across England; stretching resources, unsettling patients, and disrupting vital healthcare.Figures from NHS Digital reveal there were 19,566 false fire alarms at NHS trusts throughout 2020/21, with some trusts recording upwards of 500 false alarms.The worrying results reveal that both in the past year and historically, several patients have sustained ‘injuries during evacuation’, highlighting the damaging effects of an unnecessary evacuation.With appointments cancelled, operations delayed, and a fall in emergency department attendances during the period, we might have expected to see the number of false fire alarms fall significantly during the pandemic.At a time where it is vital to avoid the crowded corridors and large gatherings at assembly points that follow an evacuation, it has become even more pertinent to eradicate the causes of false alarms ensuring a socially distanced environment for vulnerable patients.Of the 19,566 false alarms 5,742 resulted in a callout, firefighters respond to all alarms as if they are real. This exposes the public and fire crews to unnecessary risk in their emergency response to unwanted fire signals, directing them away from real emergencies – threatening to place added pressure on the NHS.Across the 216 NHS trusts listed within the data, a total of 1,175 genuine fires were recorded.False alarms cost businesses and Fire and Rescue Service authorities an estimated £1 billion a year in the UK. In order to recoup this cost, the London Fire Brigade became the first fire service in the country to recover costs from hospitals with a poor false alarm record.A false alarm is a fire alarm signal caused by means other than a genuine fire, which has activated a fire detection and alarm system, these can include: equipment false alarm, environmental influences, accidental damage, and inappropriate human action, including the malicious activation of a manual call point.As recommended in BS 5839-1:2017 manual call points can be fitted with a protective cover to prevent false fire alarms. The British Standard Institute recommends in section 20.2b that: “All MCPs should be fitted with a protective cover, which is moved to gain access to the frangible element.“It is now recommended that a protective cover is fitted to a Type A manual call point to help prevent false alarms.”This is supported by fire safety guidance set out by the Department of Health which outlines the importance of “initiating measures to reduce false alarms and unwanted fire signals,” such as “the provision of lift flaps, or lift flaps combined with a local alarm device [which] are sufficient to control the possibility of undesirable actuation by patients.”Safety Technology International manufacture a range of protective covers, from integral covers to outdoor and sounder models; there are variations to suit all applications. These covers are specifically designed to prevent false alarms whether accidental or malicious.The Call Point Stopper is a protective cover ideal for areas with a risk of accidental activation, such as hospitals and healthcare facilities. The polycarbonate cover does not restrict the legitimate operation of vulnerable call points and helps distinguish a fire call point from a green electronic door release – often located nearby, this is a common cause of false alarms.Fire crews recently attended a false fire alarm at the Royal Blackburn Hospital after a discharged patient broke five break glass call points. If there is a history of malicious activations whereby patients or visitors intentionally activate the fire alarms, causing unwanted evacuations and disrupting important healthcare, the Euro Stopper offers a solution.The Euro Stopper provides a tamper-proof cover featuring the same sturdy UV-stabilised polycarbonate housing as the Call Point Stopper with the useful addition of an optional integral sounder and glow-in-the-dark frame. The 96 dB sounder emits a piercing alarm when the cover is lifted drawing immediate attention to the area, acting as a pre-alarm in a real emergency.If further robust protection is still required the Universal Stopper provides IP56 protection from the elements, with a tough outer dome or low profile cover strong enough to withstand the severest of knocks from hospital beds, trollies, or wheelchairs. An optional sounder and break seal acts as an additional deterrent against malicious activation.Conforming up to IP66, the Enviro Stopper offers the same protection against both accidental and malicious activation whilst guarding against ingress in harsh environments, such as wet rooms or wash down areas.
Sponsored
Malicious false fire alarm hits record high

Malicious false fire alarm hits record high

Safety Technology International Ltd

A record number of manual call points were maliciously activated across England for the year ending March 2022.The highest annual number of malicious false fire alarms on record came as people returned to public buildings en masse in a period markedly unaffected by COVID-19 lockdowns.The latest Home Office figures reveal there was a total of 3,212 false fire alarms caused by the “malicious activation of [a] fire call point/alarm” in England for the year ending March 2022, surpassing challenged hoax calls as the largest reason for malicious fire alarms.Accidental activations also increased over the period; 14,452 false fire alarms were recorded due to the accidental and careless activation of life safety equipment, including manual call points.Every false alarm is costly, disrupting schools and businesses, placing unnecessary strain on our emergency services and reducing public confidence in fire alarms.Despite online learning, working from home and limits on social contact, false fire alarm numbers, although down, persisted during the pandemic.As schools, offices and shops saw reduced attendance and footfall, malicious false fire alarms survived; now in a post-COVID world, there has been a boom in the number of false alarms plaguing the country.Continuing to be the largest incident type, false fire alarms accounted for 40 per cent of the incidents attended by Fire and Rescue Services in England for the period – fires accounted for just 26 per cent.Repeated false alarms reduce the public’s confidence in fire alarms, contributing to alarm fatigue and a complacent attitude toward evacuations. Alarm fatigue occurs when a person becomes desensitised to an alarm due to repeated false alarms and as a result, fails to react appropriately in an emergency.Safety Technology International manufacture a range of protective covers, specifically designed to prevent false alarms whether accidental or malicious.The STI story began in 1980 with a challenge by a school headteacher who wanted to stop their false fire alarms. Founder, Jack Taylor, used his expertise in security systems to invent the first and original Stopper® polycarbonate protective cover. From integral covers to outdoor and sounder models, there are now variations to suit all applications.The tamper-proof polycarbonate covers ensure call points are protected without restricting legitimate use in a real emergency, a combination of optional warning alarm, flashing beacon and break seal acts as a deterrent against malicious activation.In Wales, malicious false fire alarms rose by 33% to 426 during 2021-22, the highest figure for half a decade. And with similar figures reflected across the UK, over £1 billion is lost every year due to false alarms.To recoup this cost the London Fire Brigade became the first fire service in the country to recover costs from buildings like hospitals, airports and student halls with a poor false alarm record.Firefighters respond to fire signals as if they are real, this exposes the public and fire crew to unnecessary risk in their swift response to false alarms, directing them away from real emergencies.Under The Regulatory Reform (Fire Safety) Order Act 2005, it is the responsibility of the building owner or the “responsible person” to ensure effective fire precautions are in place to protect staff, customers or visitors.Several precautionary steps can be implemented to prevent false fire alarms before they occur; routine testing and maintenance of call points is a must to ensure proper operation, but it is not the only proactive approach.As recommended in BS 5839-1:2017, manual call points can be fitted with a protective cover to prevent false fire alarms. The British Standard Institute recommends in section 20.2b), that: “All MCPs should be fitted with a protective cover, which is moved to gain access to the frangible element.“It is now recommended that a protective cover is fitted to a Type A manual call point to help prevent false alarms.”
Sponsored
Reds10, Hull

Reds10, Hull

Impact Group UK

Modular Construction and Hygienic Wall Cladding.
Sponsored
NEW London Fire Brigade Policy on Automatic Fire Alarms

NEW London Fire Brigade Policy on Automatic Fire Alarms

Safety Technology International Ltd

Similar to the Scottish policy announced last summer, the London Fire Brigade have released a change in their policy to Automatic fire alarms in commercial buildings.Starting from October, the London Fire Brigade are reducing the amount of time and resources spent going to unwanted fire signals. Unless they receive a call reporting a confirmed fire, the fire service will stop automatically attending call outs between 7am and 8:30pm in buildings such as office blocks and industrial estates.Of the 52,000 Automatic Fire Alarm calls attended in 2023/24, less than one percent of calls were ultimately recorded as fires, meaning the vast majority were false alarms.99% of calls being false alarms is a massive waste of resources and time for the emergency services, taking their priority away from saving lives. By reducing time and resources wasted on false fire alarms, the fire brigade can put their services to better use and free Firefighters to attend real emergencies.Not only do false alarm call outs drain resources and waste precious time and money, they can also lead to complacency and have costs associated to the business in which the false alarm takes place. Repeated false alarms cause alarm fatigue, which can be fatal to life if people do not respond in genuine emergencies because their sense of urgency is critically lowered.Successfully reducing false alarms will reduce unwanted fire alarm signals, leading to less disruptions for businesses and eliminating unnecessary risk to the public and fire crews when they travel at high speed to attend ‘emergency’ calls.The new policy, however, only applies to commercial buildings, meaning schools, residential buildings and many other types are exempt. It also only applies during daytime hours at residences where no one sleeps. Therefore, it is still vital to take other measures to reduce false alarms and protect manual call points from any unwanted use or accidental damage.STI’s protective covers have been specifically designed to help deter false alarms and to prevent vandalism or accidental activation of manual call points. The strong, durable construction of our polycarbonate call point protectors means they can withstand the toughest knocks, whilst offering lasting protection against false alarms in a variety of situations.Trust STI products to help protect the things that protect you®.For more information on the new London Fire Brigade policy and to check if your building is exempt, visit here: https://www.london-fire.gov.uk/safety/the-workplace/automatic-fire-alarms/afa-policy/
Sponsored
Nottingham E-Sports Competitors Protected By FIREFLY® Barriers

Nottingham E-Sports Competitors Protected By FIREFLY® Barriers

FIREFLY™ TBA

While concrete walls and Armco barriers are conventionally used to help protect drivers and spectators at motor racing circuits around the world, products from the range of FIREFLY have been specified to provide the necessary fire protection periods within an East Midlands venue which has become a focus for E-sports enthusiasts in the UK.The work at The Metronome in Nottingham is being carried out by one of FIREFLY’s approved installers on behalf of the venue’s operator, Confetti Media and is making extensive use of the manufacturer’s FIREFLY Zeus Lite 90:30 barrier, along with the Collaroll product to create compartmentation throughout a basement area, and as parts of The Metronome are also used by Nottingham Trent University and its students as a recording and production studio, Krasi Fire Protection Ltd.’s contract is in fact being phased – with work due to complete to work around the academic year. The Contract Manager for Krasi Fire Protection Limited, Daniel Oldacre, commented: “We began using the FIREFLY barriers a couple of years ago instead of mineral wool based systems and have been getting very good training, specification and on-site support from the company. In the case of the contact here for the company which operates The Metronome, we put forward the FIREFLY Zeus Lite 90:30 as the best product to create the necessary fire barriers as part of a major refurbishment and FIREFLY’s Technical Manager, Dave Allen, assisted in supplying the necessary compliant details.  He is also attending site regularly to carry out the required inspections. It is quite a large and complex contract during which we will be installing barrier across the soffits and walls as well as protecting services such as ductwork.  While some of the spaces are confined, FIREFLY is easy to cut and fix in place and saves us a lot of time compared to conventional systems and although we are not installing horizontally here, we did have all 10 of our operatives trained up on FIREFLY’s Horizontal systems as part of the annual update on installation of the systems.”  FIREFLY Zeus Lite is ideally suited to this type of application, comprising a flexible woven fabric fire barrier that has been specifically developed for the vertical separation and compartmentation  of extensive concealed spaces within buildings.By offering 90 minutes integrity and 30 minutes insulation, FIREFLY Zeus Lite 90:30 exceeds the minimum requirements regarding fire barriers under the Building Regulations’ Approved Document B (Fire Safety).  The specially treated glass fibre fabric is strong and resilient as well as flexible while, crucially, the system’s certification covers the inclusion of service penetrations which some products do not. Manufactured from woven and non-woven glass, the FIREFLY range is designed to optimise resistance to flame and smoke as well as offer heat protection in a wide range of scenarios.  The barriers are easy to install horizontally or vertically using a full selection of FIREFLY ancillary products to ensure a fully tested and certified installed system.Images shown are taken during installation and some sections of the installation might be incomplete.
Sponsored
FIREFLY® Products Protecting Britain’s Premier Glasshouse Business

FIREFLY® Products Protecting Britain’s Premier Glasshouse Business

FIREFLY™ TBA

Located in the East of Kent, Thanet Earth is the UK’s leading producer of salad vegetables, where an estimated 400 million tomatoes and 30 million cucumbers are grown every year: with the initial processing and packaging being carried out in a facility where 900m2of the roof structure has had its fire protection upgraded using products from the range of FIREFLY®.The specialist contractor involved, Kent based C A Fire Protection, is a regular user of FIREFLY® and called in the manufacturer’s local Technical Sales Manager for advice when it was invited to tender for the challenging retrofit project.  Following a detailed site inspection and discussions with the client’s FM team, FIREFLY® Zeus Horizontal and FIREFLY® Titan Lite was specified in combination with FIREFLY® Collaroll and FIREFLY® Penowrap to offer continuous 60 minute and 90 minute protection across the soffit, which features numerous down-stands and building services installations. With the ceiling structure to the packaging plant unable to support heavy equipment, C A Fire Protection was forced to repeatedly erect and take down alloy access towers, as their team worked around the cable trays and other obstructions, necessitating a 13-week programme.  In general, the installation method for the FIREFLY® Zeus Horizontal and FIREFLY® Titan Lite saw the experienced operatives assembling frames of the 50 x 50mm metal angle, beneath which the flexible fire barrier was fixed using a 80 x 1mm flat strap, along with FIREFLY‘s High Temperature Adhesive and Stainless Steel Staples.  The FIREFLY® Penowrap and FIREFLY® Collaroll were employed to ensure continuity around roof beams as well as the hangers for the cable trays and other services. The Contracts Manager for C A Fire Protection, Steven Halkett, commented: “We undertake work right across the country, though a lot of it is concentrated in London and Kent where we have offices.  The sectors we cover include commercial, residential, airports, schools, hospitals and other public buildings.”“Our use of FIREFLY® systems has increased a lot over the past couple of years and we sought the company’s advice when we were assessing the work to be done at Thanet Earth, where a lack of insulation in the roof had led to condensation problems and deterioration of the original fire barriers.  We subsequently won the contract to remove all of the old, brittle material and to install the FIREFLY® Zeus Horizontal and other materials.  We were grateful for the  help that we received from FIREFLY’s technical personnel, including the provision of specific details and inspections as the work progressed. Subsequently, the job was completed according to schedule.”     The lightweight and flexible FIREFLY® Penowrap has been developed to compliment other FIREFLY® fire barrier systems and can be used to fully protect structural members as much as 300mm below the main barrier, offering additional protection.  It provides 60 minutes integrity and 60 minutes insulation when used to wrap around exposed sections of timber or steel during the construction or upgrade of a building.Tested to BS 476 Parts 20 & 22, FIREFLY® Penowrap is manufactured utilising a layer of non-woven silica with aluminium foil on the outward facing surface.  The product, which is non-toxic as well as easy to cut and shape, has additionally received a Pass for Parts 6 & 7 (propagation and surface spread of flame).  The 300mm wide fire wrap is supplied in 10 linear metre long rolls, and is just 12mm thick.  Furthermore, it only weighs 2.02kg/m2 so it is light to handle on site.  FIREFLY® Penowrap is installed using standard fixings and is fully compatible with the angles and high temperature adhesives to be found within the approved FIREFLY® range.
Sponsored
The Chesterfield Nuffield Hospital, Bristol

The Chesterfield Nuffield Hospital, Bristol

Intastop Ltd

The Chesterfield Nuffield Health Hospital, Bristol commissioned Intastop Ltd after its walls in theatre corridors and waiting areas were suffering from high levels of unsightly and unhygienic impact damage.
Sponsored
FIREFLY™ PHOENIX Offers Temporary Fire Protection For Fenchurch Street Offices

FIREFLY™ PHOENIX Offers Temporary Fire Protection For Fenchurch Street Offices

FIREFLY™ TBA

FIREFLY™ PHOENIX Offers Temporary Fire Protection For Fenchurch Street OfficesThe refurbishment of two complete floors to one of the City’s largest office buildings is making use of the well proven and versatile TBA FIREFLY™ PHOENIX smoke & flame barriers, to create temporary fire barriers while the work is being carried out: protecting people and property across the rest of the five storey structure where business continues as normal.The project at 30 Fenchurch Street, EC3 is being led by Overbury – one of the capital’s most experienced fit-out contractors, while the London office of HLW Architects is leading the design team. T&R Fire Protection meanwhile is the specialist sub-contractor carrying out the installation of the PHOENIX around the atrium, as well as other passive fire protection measures as the scheme evolves.In total T&R has fixed 22 rolls of the lightweight PHOENIX material to create the two hour integrity smoke and flame barriers around the glazed edge of the floor plates at levels Three and Four of 30 Fenchurch Street. The lightweight barrier has been fixed to the bulkhead and at intervals down all of the existing columns, before finally being secured across steel angle sections bolted to the floor slab.IFC Certification duly inspected all 160 metres of the temporary barriers – up to 3,300 mm in height - once installed, on behalf of Overbury and duly issued a certificate of compliance. The permanent works are expected to include creating fire breaks within the ceiling zones at 20 metre intervals, as part of T&R’s overall contract for Fenchurch Street in the region of £250K.The Site Manager for T&R Fire Protection, Tom Port Smith, commented: “We’ve used PHOENIX and other FIREFLY™ products on many hundreds of projects in the past, but in this case it was the insurers for the project who insisted on the installation of the screens to protect the atrium while the sprinkler system was being replaced. The installation though was relatively straightforward and in our work generally, FIREFLY™ is our ‘go to’ manufacturer when it comes to fire compartmentation. We base our recommendations and design drawings on TBA FIREFLY™ standard details and, once they’ve been approved, go in and install the flexible fire barriers.”Tom, like the majority of T&R Fire Protection’s operatives, has attended training sessions at FIREFLY's premises in Rochdale, reinforcing their trade skills and gaining valuable insights into the performance parameters of the different barriers in the range.FIREFLY™ PHOENIX is a lightweight smoke & flame barrier developed to enable compartmentation within buildings to provide up to 120 minutes’ integrity under BS476 Parts 20 & 22. Certified by IFCC, the flexible and straightforward to install material and is suitable for both new-build and retrofit situations.Manufactured from woven and non-woven glass, the FIREFLY™ range is designed to optimise resistance to flame and smoke as well as offer heat protection in a wide range of scenarios. The flexible barriers are easy to install horizontally or vertically using a full selection of ancillary products. Used mainly in the construction industry across the UK and Europe, FIREFLY™ Fire Barriers help to contain fire, giving building occupants extra time to evacuate and the fire service to enter safely.
Sponsored
Ping An Finance Center

Ping An Finance Center

Jotun A/S

Ping An Finance Center is an iconic 115 story skyscraper in Shenzhen, China. Reaching 600 metres high, this striking building was completed in 2017, making it the world’s fourth tallest building and the second tallest in China. Jotun was chosen as the single source provider due to our long track record of multi-divisional, complex projects. Jotun Protective Coatings and Powder Coatings were specified to protect the steel structure and façades. An ideal choice, confirmed by both the contractor and applicator, due to Jotun’s consistent application properties under varying environments and construction conditions.
Sponsored
Film House, London

Film House, London

Advanced

A shared use office and retail space at the landmark former home of British Pathé is now being protected by an Advanced fire system.
Sponsored
False fire alarms in leisure, retail, and hospitality premises

False fire alarms in leisure, retail, and hospitality premises

Safety Technology International Ltd

Every false fire alarm is costly, but in a post-COVID world, there is now even more pressure on the leisure, retail, and hospitality industries to prevent false alarms in their premises.The leisure, retail, and hospitality industries were hit hard by COVID-19; as we begin to emerge from the pandemic businesses will be keen to make up for lost time, avoiding the loss in revenue caused by false fire alarms.Home Office figuresDespite two years of restrictions and lockdowns, false fire alarms continue to cost the UK, Home Office figures reveal that there were a total of 2,497 false fire alarms caused by the “malicious activation of [a] fire call point/alarm” in England for the year ending September 2021 – surpassing challenged hoax calls as the largest reason for malicious fire alarms.Accidental activations too remained a significant cause of false alarms; 12,732 false fire alarms were recorded due to the accidental and careless activation of fire alarm and fire-fighting equipment, including manual call points.With the restrictions, closures, and reduced footfall faced by businesses, we might have expected to see the number of false fire alarms fall significantly during the pandemic. This serves as a timely reminder of the persistence of unwanted fire alarm signals, and the need for leisure, retail, and hospitality premises to seek a solution to avoid further disruptions post-COVID.Although necessary once a fire alarm sounds, a preventable evacuation ultimately means unhappy customers, disruption for businesses, and unnecessary strain for our stretched emergency services.At a time where it is prudent to avoid the crowded corridors and large gatherings at assembly points that follow a needless false alarm evacuation, it has become even more important to prevent false alarms.Continuing to be the largest incident type, false fire alarms accounted for 41 per cent of the incidents attended by Fire and Rescue Services in England for the period – fires accounted for just 27 per cent.Over £1 billionWith similar figures reflected across the UK, over £1 billion is lost every year due to false alarms. To recoup this cost the London Fire Brigade became the first fire service in the country to recover costs from buildings including leisure, retail, and hospitality premises, with a poor false alarm record.A false alarm is defined as a fire alarm signal caused by means other than a genuine fire, which has activated a fire detection and alarm system, these can include: equipment false alarm, environmental influences, accidental damage, and inappropriate human action, including the malicious activation of a manual call point.Under The Regulatory Reform (Fire Safety) Order Act 2005, it is the responsibility of the building owner or the ‘responsible person’ to ensure effective fire precautions are in place to protect staff, customers, or visitors.Several precautionary steps can be implemented to prevent false fire alarms before they occur; routine testing and maintenance to call points is a must to assure proper operation, but it is not the only proactive approach.BS 5839-1:2017As recommended in BS 5839-1:2017 manual call points should be fitted with a protective cover to prevent false fire alarms. The British Standard Institute recommends in section 20.2b, that: “All MCPs should be fitted with a protective cover, which is moved to gain access to the frangible element.“It is now recommended that a protective cover is fitted to a Type A manual call point to help prevent false alarms.”Following the introduction of the new recommendations in 2017 malicious false fire alarms have fallen by 18%, an indication of the effectiveness of protective covers, however, every false alarm is still costly.Firefighters respond to fire signals as if they are real, this exposes the public and fire crew to unnecessary risk in their swift response to false alarms, directing them away from real emergencies.LeisureLeisure premises are particularly susceptible to false fire alarms, whether it be wayward sports equipment in sports hall and gymnasiums, or high-traffic areas in music venues, cinemas, and theatres.Concerts, football matches, and even pantomimes have all been interrupted mid-performance in the UK, and in some cases even cut short by false fire alarms – resulting in disgruntled fans and calls for refunds.Government fire safety guidance for theatres, cinemas, and similar premises, highlights the need for protective covers to combat both accidental and malicious activations: “To reduce the risk of malicious or accidental operation which may promote panic you should consider as part of your management plan alternative arrangements such as the guarding of manual call points (e.g. with a simple, easily removed, cover).”A hinged cover around a call point is also likely to solve the problem of accidental activation or damage in storage areas where there is a continual movement of equipment.Whilst guidance for open air events and venues draws attention to the high risk of malicious activations in certain public areas, such as large beer tents – in this instance, alarmed call point covers might be more effective.RetailFor retail premises, trollies and shopping bags threaten the accidental activation of manual call points and the evacuations that follow threaten both a loss of customers and profit. However, robust polycarbonate covers can be fitted to protect sensitive break glass units and deflect heavy blows.This is reinforced by the Government’s fire safety risk assessment for shops: “False alarms from electrical fire warning systems are a major problem (e.g. malicious activation of manual call points) and result in many unwanted calls to the fire and rescue service every year.”Shopping centres and supermarkets are regularly forced to evacuate hundreds of shoppers due to unwanted fire alarm signals; abandoning their shopping on conveyor belts, baskets, and trollies. Owing to the disruption many choose not to return to complete their purchases.HospitalityThis phenomenon can be particularly detrimental for the hospitality industry, where evacuations following false fire alarms leave restaurants and bars vulnerable to incidents of “dine and dash.” Some hospitality premises have lost out on upwards of £1,000 when customers walked off without paying after a false alarm.Fire safety guidance for licensed premises reinforces the need to put a stop to false fire alarms within the industry: “Fire alarm systems should normally conform to the current edition of BS 5839, with consideration made for prevention of false alarms.”Alarm fatigueRepeated false alarms reduce the public’s confidence in fire alarms, contributing to alarm fatigue and a complacent attitude towards evacuations. Alarm fatigue occurs when a person becomes desensitised to an alarm due to repeated false alarms and as a result, fails to react appropriately in an emergency – having potentially fatal effects.The Manchester Woolworths fire in 1979 is a devastating example of alarm fatigue, as the fire alarm sounded customers were reluctant to leave the store. By the time they realised they were in danger, it was too late, ten people died in the blaze.Alarm fatigue also poses a serious threat to the hospitality industry, with Government fire safety guidance for sleeping accommodation, such as hotels, stating: “If there are excessive false alarms in your premises, people may become complacent and not respond correctly to a warning of a real fire. In such circumstances, you may be failing to comply with fire safety law. All false alarms should be investigated to identify the cause of the problem and remedial action taken.”In some areas of hospitality premises, such as function rooms in a hotel, call points can be vulnerable to malicious and accidental activations – to reduce this risk, protection for manual call points is advised.Some hotel guests react casually to fire alarms, often wrongfully believing them to be a “hoax” or “prank”, reducing response time and delaying evacuation. As recommended in BS 5839-1:2017 manual call points can be fitted with a protective cover preventing false alarms whether accidental or malicious, halting alarm fatigue.Call point protectorsSafety Technology International manufacture a range of protective covers, specifically designed to prevent false alarms whether accidental or malicious.The STI story began in 1980 with a challenge by a school headteacher who wanted to stop their false fire alarms. Founder, Jack Taylor, used his expertise in security systems to invent the first and original Stopper® polycarbonate protective cover. From integral covers to outdoor and sounder models; there are now variations to suit all applications.The tamper-proof polycarbonate covers ensure call points are protected without restricting legitimate use in a real emergency, a combination of optional warning alarm, flashing beacon, and break seal acts as a deterrent against malicious activation.As we enter transition to the “new normal” it is imperative the leisure, retail, and hospitality industries prevent false fire alarms in their premises. Conforming to BS 5839-1:2017 to protect manual call points from false activation, whether accidental or malicious. Not only to aid economic recovery post-pandemic but to keep fire safety at the forefront of customers’ minds. Failure to address false fire alarms allows alarm fatigue to manifest, and this can prove to be costly – in every sense of the word.
Sponsored
FIREFLY™ TITAN Lite™ Protecting Movement Joints Within New Midland Metropolitan University Hospital.

FIREFLY™ TITAN Lite™ Protecting Movement Joints Within New Midland Metropolitan University Hospital.

FIREFLY™ TBA

The fire protection of critical movement joints within the main floor slabs of the new Midland Metropolitan University Hospital in Birmingham has consumed some 1,000 linear metres of FIREFLY™ TITAN Lite™ 120/60, as a well proven and widely specified passive fire protection product.
Sponsored
Uncompromising fire protection for contemporary steel framed glazing with SYSTEMGLAS® Ferro

Uncompromising fire protection for contemporary steel framed glazing with SYSTEMGLAS® Ferro

Promat UK

The steel framing system that was introduced in the UK to provide EI fire protection in butt jointed glazing is now available as a complete, safety-assured glazing system with the launch of the SYSTEMGLAS® Ferro range from Promat UK. SYSTEMGLAS® Ferro is a complete glazing system suited to contemporary interiors with the fire glass, steel framing, beading and setting blocks supplied directly by Promat for maximum traceability. It is installed exclusively by a network of approved installers to ensure total peace of mind for specifiers, backed with the confidence of Promat UK’s 360 degree wheel of assurance.
Sponsored
Hong Kong-Zhuhai-Macau Bridge

Hong Kong-Zhuhai-Macau Bridge

Advanced

The $18.8 billion Hong Kong–Zhuhai–Macau Bridge, the longest open-sea fixed link on earth, is now protected by fire panels from from global industry leader, Advanced.A network of 31 Advanced ExGo gas extinguishant control panels were installed as part of the active fire protection protocol for one of South East Asia’s most ambitious infrastructure projects. The Advanced network protects the artificial island gateway in Hong Kong that serves as an entry and exit point for the new 34-mile bridge-tunnel hybrid system, used by over a 15 million people a year.The ExGo panels were selected to protect critical server rooms in 10 different structures on the purpose-built island, including police and fire stations ,as well as customs and administrative buildings. Each extinguishing system was designed, installed, configured and commissioned by Peak Trade International Limited, with every ExGo panel connected to at least one remote status indicator unit.
Sponsored
Astra Centre, Harlow

Astra Centre, Harlow

Impact Group UK

We supplied and installed this project using ImpcatPRO Satins from our extensive range of Hygienic Wall Cladding finishes.
Sponsored
Haynes International Motor Museum: Fall Protection Solution

Haynes International Motor Museum: Fall Protection Solution

MSA Safety (Latchways)

Haynes International Motor Museum in Sparkford, Somerset, United Kingdom, houses more than 400 cars and motorcycles. The museum opened in 1985 to showcase the personal collection of John Haynes OBE, publisher of Haynes Manuals. Charitable Trust museum management decided that the site was due for renovation. A two-plus year refurbishment resulted in a modernized museum that incorporates an S-shaped glass two-story foyer, and inside the numerous buildings, renovations continue to allow for more exhibits. Before the renovation, the museum had not incorporated fall protection anywhere onsite, but management saw the timing as appropriate for its introduction.
Sponsored
Alnmouth Friary, Northumberland

Alnmouth Friary, Northumberland

Advanced

MxPro 5 panels protect Alnmouth Friary, a Franciscan monastery overlooking the Alnmouth coastline in Northumberland.An Advanced MxPro 5 analogue addressable fire panel was installed in the Friary to provide industry-leading protection that is high-performance and fault tolerant. Alnmouth Friary was originally built as a private dwelling in the early 20th Century and today the main ministry offers hospitality to visitors and is also the house where new men are welcomed to try their vocation with the Society of Saint Francis.Fire and security service providers, Safe Services, installed an Advanced MxPro 5 four loop analogue addressable fire panel in the Friary. Safe Services was involved in the project from the design stage though to installation and commissioning. The Advanced MxPro panel is integrated with Apollo Discovery fire detectors for a complete fire system.

Showing 73-108 of 783

Feedback