"building frames"

Jerry had always liked New England style houses so this is what he and his wife envisioned for the renovation, a sharp looking house with clean lines. They felt this would be achievable through an extension of the house and a cladded facade. It was their contractor who pointed Jerry in the direction of Hardie® Plank cladding, which he felt would be the ideal solution for the project. Even though the contractor had not worked with the product before, he had seen it on other properties and was keen to start working with the cladding.

As the owner of a 1980s brick-built detached house in Chessington, Toby Spencer had never liked the austere timber cladding that covered most of its top half. So when time and weather finally began to take their toll on the black painted wood after 10 years, he decided to consider a tougher, longer-lasting option. Having researched plastic cladding as a replacement, Toby was introduced to Hardie® Plank cladding by James Hardie preferred contractor Square Deal. And by choosing the product in Traditional Red, he said goodbye to the black weatherboard in favour of a brighter future.

Classic meets contemporary with new Hardie® VL Plank interlock board on new extension.Traditional home in Harrogate was extended at the rear with a new double-storey extension and contrasting tongue and groove Hardie® VL Plank weatherboard on the upper level.The homeowner chose Hardie® VL Plank board for its' fresh, symmetrical look and low maintenance properties. Here Anthracite Grey in cedar complements the local stone to offer a strong contrast. The end result is a striking renovation that beautifully captures the character of the home's local heritage. "Mixing traditional with modern was key to our design and so we quickly switched to Hardie® VL Plank for the crisp, clean lines to contrast with the exposed stone" - Private Homeowner.

The construction of the West Bromwich Leisure Centre developed a strong relationship between, architect, main contractor, sub-contractor and manufacturer as well as the major development of a state of the art leisure facility. Mapei UK products were specified on all areas and were on site from the beginning ensuring that full support was given to all aspects of the project development, assisting with full specifications covering M10, M20, M40, M50, J30, and K21, from the general application of screed to the finer detail of waterproofing drainage channels.

Award Winning postmodern styling was achieved with a mix of ARDEX products, including PANDOMO®, helping to make the Scottish Parliament one of the most innovative architectural designs in the UK. Products used: ARDEX P 4, ARDEX P 51, PANDOMO® Wall

The British Museum opened its doors in 1759. Now home to some 8 million works from a number of different cultures, the museum stands as an iconic London attraction. The Museum made the decision in November 2013 to replace the restaurant’s old flooring, as it could no longer handle the vast number of visitors. W B Simpson Ltd, was the chosen tiling contractor to complete the new installation. Marc Poland, Director at W B Simpson Ltd said “The architect consulting on this project specified we use ARDEX UK’s products. Their high performance adhesives are typically the preferred choice of architects.”

Residing alongside the River Thames in Reading is the site of the King’s Meadow swimming pool. It originally opened in 1902 as the Ladies Swimming Baths and is the oldest outdoor public pool from the early Edwardian era in existence. However, over time it fell into a state of disrepair and, following its closure in 1974, has been left unused for over 40 years.

350m2 of the entrance foyer and retail area was levelled and smoothed over 3  nights, allowing the cinema to remain fully operational.

Due to the curved design of the new Everton Stadium structure, the contractors (Laing O’Rourke) were looking for M&E supports that could sit on the curved surfaces and still support the M&E installation correctly. Walraven were invited on site to discuss the Walraven Yeti solution, which is an all-in-one adjustable support foot for pitched roofs / curved surfaces. The Walraven Yeti foot was specified due to its ease of installation, adjustability and sustainable credentials.

We supplied 24,000m2 screed binder to our Smet Supported Partner, Fast Floor Screed Ltd. The industry experts pump-applied Südanit 280 Alpha Hemihydrate Screed using their fleet of Mobile Screed Factories in the new hospital complex, The National Forensic Mental Health Service (NFMHS) in Portrane. We supplied 20,000 m2 Rapidur® B5 Rapid Drying Floor Screed which was laid by industry experts, B Doherty Screeding Mobile Screed Factory).The NFMHS is a new state-of-the-art facility located 22 km from Dublin City in Portrane, North County Dublin. The project was awarded by Health Service Executive to the Joint Venture formed by OHL (50%) and OHL’s local delivery partner JJ Rhatigan (50%).The project, which commenced works on site in 2017, comprises the construction of a forensic mental health hospital, as part of St. Ita’s Hospital complex. It covers a floor area of 24,000 m2, not including the energy, maintenance, and gardening buildings. The new hospital will accommodate 170 patient beds, distributed as follows: National Forensic Hospital: 120 beds; Mental Health Unit for Children and Adolescents: 10 beds; Intellectual Disability and Mental Health Unit: 10 beds; and the Intensive Care Rehabilitation Unit: 30 beds. The construction project also includes the execution of spaces related to energy production systems, maintenance, and horticulture.

The client required a large shop floor leveling on a tight time frame. The 6000m2 floor ranged from 18-35mm in depth, with a tight time frame. Gyvlon Excelio bonded at 18-35mm was the chosen product due to the speed, strength and cost savings. The large floor was poured over 3 days with trades being able to light foot traffic within 24 hrs and full site traffic within 48 hrs ensuring the tight frame was achieved. By using Ready mix Gyvlon Excelio the customer saved time and money by replacing a bagged self leveler with Gyvlon Excelio.

Stone effect PPC expertly applied to secret fix aluminium System for the picture frame to match the original intent of stone cladding. This picture frame element brought with it a very complex geometry as it set the location for all the cheek walls and soffits for the recessed balconies’.Finish: Y4312I Portland Stone

Temples and dream beaches with turquoise-blue water make Thailand a sought-after destination for tourists from all over the world. The capital Bangkok, with a population of some nine million, is a city of contrasts with irresistible magic. In contrast to many other Asian megacities, however, the city has few contemporary architectural highlights. The German architect Ole Scheeren created Bangkok’s new landmark in the form of the 314-meter high MahaNakhon. A gently spiraling, perforated belt of glass balconies and terraces forming a staggered arrangement gives the reflective louvered façade its unmistakable, pixelated face. The MahaNakhon is complemented by the seven-story shopping temple Cube and a fully automated parking garage. For the cladding of the parking garage, the architect chose PC-Sambesi metal mesh from GKD – GEBR. KUFFERATH AG. Alongside the extraordinary aesthetics, its proven low-maintenance solar protection and reliable fall guard protection properties were crucial factors behind this decision.In Bangkok, facets of village and megacity, Buddhism and business are thrown together in a seemingly random way to form a fascinating mix of cosmopolitan flair and centuries-old traditions. The formerly quiet residence city was transformed into a pulsating metropolis that is home to millions of people in just six centuries. Since the 1980s, fully air-conditioned office towers, malls and apartment blocks have been shooting up like mushrooms. Today, the hectic Asian way of life dominates Buddhist tranquility. This contrasting nature is reflected everywhere in the face of the city. Alongside the Grand Palace, more than 400 temples bear witness to the rich culture of the capital, which stand side-by-side with Chinese pagodas, colonial-style buildings, dreary tin huts and gigantic glass malls. Scattered prestige buildings such as the 20-story Robot Building, the Nation Tower, the colors and form of which recall cubism, or the naive-looking Elephant Building complete the city’s chaotic skyline.Tower of superlativesWhen commissioning the MahaNakhon, the building owner, PACE Development Corporation Ltd., desired a building that sets an outstanding architectural highlight while also being integrated in the city as a public place and a worthy addition to Bangkok’s contradictory mix of tradition and modernity. Ole Scheeren took up the exuberant dynamics of the metropolis in his design and created a new urban center across an area of 135,000 square meters. This is also reflected by its name MahaNakhon, which means Big City. The three-part complex consisting of the tower itself, the Cube and a parking tower graces the city’s financial district. Across 77 floors, the tower offers space for 209 luxury apartments with between 125 and 830 square meters, 155 hotel rooms and numerous shops and restaurants. A particular highlight is the 3,500 square meter Skybar, which grants previously unknown views of Bangkok from a height of 300 meters. However, the MahaNakhon’s character as a new icon of the city is due to the staggered glass balconies and terraces, which give the giant the feel of an incomplete building with a vertical twist. From a distance, the fragmented pixel belt resembles a helix – an association that was consciously chosen by the architect as a synonym for genesis and development. At the same time he uses the image of the seemingly randomly arranged pixels to visualize the intricacy and chaotic dynamics of the urban structure. The apparently missing pixels also give the viewer the feeling that they are peering into the interior of the building.The future of parkingThe winding pixelated belt of the tower, which starts at the peak of the tower, ends at the spacious indoor and outdoor terraces in the sales and gastronomic area on the lowest seven floors of the MahaNakhon. Together with the exterior of the neighboring Cube mall, they form an outdoor atrium as a public event location. A parking tower rises behind the Cube, offering space for almost 900 cars over 10,400 square meters with an automated parking and retrieval system. In order to adapt the appearance of this structure to the luxurious overall ambience, the architect chose shimmering PC-Sambesi stainless steel mesh from GKD – GEBR. KUFFERATH AG for the cladding. A total of 464 framed mesh panels, each 2.9 meters high and up to 1.8 meters wide, subtly take up the visual appearance of the louvered façade of the MahaNakhon. As a discreet companion to the reflective surface of the tower, they also reflect the surroundings and the frequently changing sky that is a feature of the country. Some 2,100 square meters of rigid mesh lend the parking garage an elegant look. In addition to the high-quality appearance of the metallic skin, the architect was also convinced by the ease with which the cladding can be maintained. The attractive shell fulfills two functional roles: it serves as reliable fall guard protection on all floors, while also playing a key role in supporting the environmentally friendly overall concept of the MahaNakhon complex. In the tropical climate of Bangkok, the light- and air-permeable membrane proves its worth as an effective solar protection solution, which also enables natural climate control of the parking tower. Because daylight can enter the building freely, less electric lighting is required. In monsoon seasons the mesh also protects the parked vehicles from driving rain. The stainless steel, which is almost 100 percent recyclable at the end of its service life, also improves the ecological footprint of the building complex. The MahaNakhon was opened in August 2016 in the heart of Bangkok following an eight-year planning and construction phase. Today, the country’s tallest building is constantly in dialog with the city and its people. As such, Bangkok’s new landmark links opportunities for identification and participation with the role of an ambassador for a city on the rise.

A beautiful Yorkshire family home has found a new lease of life with the addition of aluminium doors and windows replacing the existing timber frames. Achieved using Reynaers bi-folding and sliding doors; CF 68 and CP 130, as well as door and window systems; CS 68 and ES 50. Alongside striking visuals, the unique design of the frames makes for excellent performance characteristics, meeting the highest requirements when it comes to insulation, stability and safety, while perfectly framing the garden views. Elsewhere, aluminium windows have improved day-to-day usability, with sliding opening options reducing draughts and improving ventilation.

Bellway had a prime location, just four miles from Canary Wharf and eight miles from central London, with 300 metres of river frontage and panoramic city views, in which to build an attractive new housing complex.Due to its prestigious postcode, the new homes needed to be of the highest quality in terms of construction and elegant in appearance to appeal to the target clientele.Following extensive planning, K Systems brought Bellway’s vision to life and created a beautiful collection of new one, two, and three-bedroom waterside homes on the banks of the River Thames.Each home in the River Gardens development boasts outstanding thermal performance incorporating a façade with an A2 fire resistance rating and a high-quality finish with superb durability and resistance to the elements.Our ServiceThe River Gardens project took place during a global pandemic when the construction industry was significantly impacted in terms of workforce and availability and costs of materials. Despite all these external factors we delivered a stunning, successful project, within budget, without delay or compromise on quality, that not only met but exceeded the requirements and expectations of the client, Bellway Homes.We worked in close partnership with Jessella Ltd (the installer) throughout the duration of the project. As part of our service commitment, our technical team were available to provide hands-on-guidance, offer support, technical guidance and ensure high levels of quality.Jessella Ltd Project Manager, Pavel Mihaylov explains:“River Gardens was one of the most challenging but rewarding projects I have worked on. It was a very complex project with a strict scaffold strike programme and being dependent on weather and many other trades. That made it very difficult to achieve completed areas on time. Thanks to working closely with Jason and Patrick from K Systems and their regular site visits and guidance over the phone, we managed to achieve the required completion dates, safely and with an excellent quality finish.”Technical Project DetailsAfter extensive planning and a comprehensive scoping process with the client and all involved third parties, we specified the K Systems Exicco M, drained cavity façade system with mineral wool insulation. This high performing system is suitable for steel and timber framed buildings and is highly compatible with high rise projects like River Gardens.Fire safety with high rise buildings is of utmost importance and the K Systems Exicco M system generates exceptional performance and provides high levels of fire resistance and noncombustibility (A2 rating).K Systems specified River Gardens with a façade system with an A2-s1,d0 fire rating. The system specified was made up of a combination of A1 fire classification substrate (sheathing board), a Tenmat 120-minute cavity barrier, an A1 non-combustible, dual-density stone mineral wool insulation slab, and a galvanised steel rail. The latest building regulations were complied with ensuring the safety of the future residents.Mineral wool has superb acoustic qualities, another reason it was specified for this project. Its inclusion in the build meant that noise from the wind and traffic travelling up and down the River Thames would be significantly reduced, ensuring a quieter residential option for target clientele who wish to avoid an audible disruption yet still live within the hustle and bustle of city life.For the finish, high-performance 1.5mm thin coat silicone render (Silicone TC) was specified. Our Silicone TC render is renowned for its ease of use on application, variety of texture and colour, and its high-performance properties. Each waterside home in River Gardens was finished in a variety of shades complimentary to the development’s surroundings.Aesthetically the development had a clean, crisp attractive finish with an impressive thermal performance and a protective exterior. The hydrophobic qualities of Silicone TC ensure a low maintenance finish, ensuring it will remain aesthetically pleasing for years to come.

External Works Package:BX17 4004 Caledonian steel framed seatsBX17 4007 Holyrood steel framed benchesBX17 4015 Springfield timber picnic unitsBXMW/NEWJ Newcastle Junior shelterBXMW/GS0 Sheffield cycle racksBXMT/444/G Maelor Trafflex round plastic litter bins

With 16 research clusters, one of the largest technology-oriented research landscapes in Europe is being created on the RWTH Aachen Campus. The distinguishing feature of the Bio-Medical Engineering Cluster, which can be seen from great distances, is the new CT2 Center for Teaching and Training of the Medical Faculty of the RWTH Aachen University. As the first investor-financed building in this Cluster, it marks another milestone. In a Europe-wide investor selection process, Frauenrath group of companies, Heinsberg, and the architects from slapa oberholz pszczulny | sop architects, Dusseldorf, won the order with their distinctive concept. They designed the building as a standalone construction that is flooded with light and takes on the role of a gateway to the Campus Melaten thanks to its shape and prominent position. Two of the façades are clad with 1,900 square meters of OMEGA 1520 metal mesh from GKD – Gebr. Kufferath AG.As an elite center of learning, RWTH Aachen University is one of the state’s flagship institutions in higher education. Around 44,500 students, 550 professors, and almost ten times as many research associates help secure the reputation of the RWTH as an internationally renowned university – above all for technical and medical degree programs. Founded in 1870, the university’s campuses are spread across the city. With an unprecedented Excellence Initiative, RWTH Aachen University has been expanding its reputation as one of the world’s leading technical universities since 2009. The RWTH Aachen Campus consists of the Campus Central – with the historic main building and the distinctive Super C meeting center in the shadow of the cathedral and city hall –, Campus Melaten and Campus West. The result is a campus that integrates into urban life. On a total area of 800,000 square meters, 16 research clusters are being built successively to answer future questions arising from the challenges of megatrends. Six of these clusters are already in the course of implementation. These include the Bio-Medical Engineering Cluster in the direct vicinity of University Hospital Aachen. This consists of four centers, each of which is dedicated to a specific field. In these operating units, academics from the Faculties of Medicine, Mechanical Engineering, Electrical Engineering, Mathematics and Natural Sciences collaborate with experts from industry on methods and products that are set to revolutionize both diagnosis and therapy.Visually seamless façadeThe CT2 Center for Teaching and Training is the first investor-financed building in the Bio-Medical Engineering Cluster. The seven-storey building was constructed with an investment volume of around €20 million. By networking theory and clinical practice the building offers state-of-the-art training opportunities for students of Medicine, Dentistry, and Biomedical Engineering. It also sets new standards in the further training of physicians and medical personnel, as well as the testing of medical equipment. The aim here was for the CT² to also reflect this function in terms of its architectural design. The architects from sop designed a cube on the slightly sloping terrain that resembles an inverted “U” thanks to its fully glazed upper façades and thereby has the appearance of a gigantic gateway to the campus located behind it. This impression is underlined by the projecting exposed concrete of the side walls which serves to frame the frontal façade. The lateral façades with ribbon windows along their length are spanned by a shimmering skin made of metallic mesh that creates a visually seamless surface. At the same time, the spaces located behind it remain visible thanks to the transparency of the metal fabric. This shell comprises twelve panels of OMEGA 1520 stainless steel mesh – each measuring 29.5 meters long by 5.4 meters wide. There were several reasons behind the decision to go with the woven membrane. These include the fact that the metallic skin underlines the building’s high-tech aspirations and lends the field of biomedical technology both a contemporary and appropriate face. Interacting with the glass façades, it facilitates communication between the interior and exterior. The attachment type is also in keeping with the philosophy of design purism. In line with the patented Fusiomesh NG system, the upper and lower edge of the stainless steel mesh is embedded in a special adhesive between two flat profiles and thereby bonded. Clamping forks ensure that the mesh can be perfectly aligned and handle the requisite static preload based on the anticipated wind and impact loads. The panels are attached to a continuous steel profile in a way that makes them visible at the bottom. At the top edge of the building, on the other hand, the material is bent over backward, so that only a fine edge of the mesh can be seen here. To reduce horizontal movement and the shearing forces at a façade height of 29.5 meters, seven stainless steel tubes run horizontally behind the mesh as intermediate attachment levels. The mesh is then attached to these tubes from the outside with wire clamps that are invisible once fitted. GKD not only manufactured and assembled the mesh for this project, but also took care of the installation.Efficient contribution to sustainabilityBeside the special aesthetics of the metallic membrane, its functional properties were the key reasons for its selection. For example, the stainless steel shell serves as solar protection that reduces the surface temperature of the façade. Yet despite this, the open mesh structure still allows unrestricted natural daylight into the rooms, as well as clear outward views. As such, it not only contributes to improving the building’s energy balance, but also makes it a more pleasant place to spend time and thereby helps boost employee performance. Since stainless steel can be fully recycled at the end of its useful life, the membrane also supports the sophisticated sustainability concept of the new building. The openness and interaction already visible from outside continue consistently into the atrium housed inside the building that is flooded with light. Numerous bridges and wide galleries allow a wide range of visual connections with all floors. The guiding principle of communication and interdisciplinary collaboration then becomes a reality that can be experienced throughout the entire building. Further highlights include a multifunctional auditorium that can house 400 people, as well as a demonstration operating theater equipped with the latest technologies. As and when necessary, these two functional rooms can be combined with the foyer in the basement to create an end-to-end event area which can, for example, be used for symposia. When operated at maximum capacity, the building can then host up to 1,200 guests. Its shimmering stainless steel mesh façade allows the gateway to the future to be seen from great distances.

The Londoner is the world's first super boutique hotel offering a collection of spaces, tastes and experiences brought to life across 16 elegant storeys. Delivering flexible space to cater for a myriad of impressive events, Style installed a six metre high Skyfold vertical-rising moveable wall in the main ballroom, as well as a combination of Dorma Hüppe Variflex sliding walls and smaller Skyfold systems throughout the numerous event areas. This focus on adaptable space, combined with Style’s expertise in delivering partitioning walls with impeccable acoustic performance, gives the hotel multiple options for opening out or dividing the available areas and maximising room hire revenue.Bringing an exciting new buzz to the south-west corner of Leicester Square, The Londoner boasts one of the world’s deepest habitable basements with six subterranean levels housing two cinemas, an expansive ballroom, as well as a swimming pool and spa facility. Above ground are 350 five-star rooms, workspace and meeting areas, restaurants and bars.UK partitioning specialists Style, worked closely with architect Woods Bagot, interior designer Yabu Pushelberg, and contractors Blue Sky Building & EE Smith Contracts, to deliver flexible event space throughout the hotel.The main ballroom is undoubtedly The Londoner’s centrepiece - an eye-catching statement of contemporary design for up to 850 guests. Allowing two events to run concurrently, the cavernous room is divided by a fully automatic Skyfold moveable wall. Discreetly housed in the ceiling cavity, the wall descends effortlessly into place at the push of a button and, with an incredible 59dB Rw acoustic rating, lively gatherings can take place either side of the wall undisturbed.In the hotel’s meeting rooms, Style installed semi-automatic Dorma Huppe Variflex double-glazed moveable walls with 52dB Rw acoustic ratings and fully glazed pass doors. For completed adaptability, the meeting areas are then additionally sub-divided using smaller Skyfold vertical-rising walls.“This is a spectacular installation,” said Style’s group managing director, Julian Sargent. “The main Skyfold is finished in a real oak wood veneer whilst the glass moveable walls feature chic black painted frames with reeded glass for enhanced privacy.

Twinfix has over thirty years’ experience designing, manufacturing, and installing school canopies, playground shelters and covered walkways for education establishments, including nursery schools, primary schools, secondary schools, colleges and universities. Each structure is designed to fit and enhance its surroundings while providing the school with the type of canopy, playground shelter or walkway they need. Twinfix provide a full in-house service, from design right through to installation.Outdoor areas that are currently not usable during hot or wet weather conditions can be made into fully productive parts of the school or nursery. Canopies installed adjacent to a nursery classroom create an easily accessible area for sand and water play, while a walkway can give protected transit for staff and pupils between buildings at any school site.Golborne High School is a coeducational foundation secondary school located in Golborne, Metropolitan Borough of Wigan, England.The oldest part of the school was opened in January 1954 and today it is a trust school under the umbrella of the newly formed Golborne and Lowton Co-operative Learning partnership.Last year, Twinfix were approached by Parklands Services to design, manufacture and install three fabricated, lean-to mono-pitch canopies at the school. The canopies all served a different purpose: one provided cover for an outdoor eating area, provide shelter to pupils outside their classroom as they learn and play and to provide cover to parents and students waiting to enter and leave.The structures spanning a total of 162 square metres comprise of Twinfix’s innovative Multi-Link-Panel Non-Fragile (NF) roofing system, glazed with 25mm multiwall polycarbonate. The roofs are non-fragile in accordance with the HSE’s test for fragility ACR[M]001:2019, an important factor when installing canopies where children may try and access the roof. Each canopy has an aluminium frame, powder-coated to RAL 7016 anthracite grey.Being a one-stop shop for designing, manufacturing and installing such outdoor structures Twinfix are proud to offer a seamless service to any school or other education establishment looking for a canopy or walkway. The staff and pupils at Golborne High School are delighted with the latest additions to their school.

As a part of a wider extension of the Barking Riverside area, the Barking Riverside project has prepared the railway station for huge numbers of new residents. The new London Overground station now connects passengers to central London in just 22 minutes in the first extension of the Overground Line since 2015. High volumes of foot traffic are expected in an area now capable of connecting thousands of new residents to the centre of the capital, so the Entrance Matting had to be extremely heavy duty for such a busy railway station. INTRAflow Plus proved the perfect solution to achieving market-leading functionality in the highest footfall areas.The obvious choiceINTRAflow Plus was chosen to meet the tight deadline for this project. This extremely durable recessed Entrance Matting is also quick and easy to install. The heavy-duty, open construction recycled aluminium planks can withstand all kinds of foot traffic and allow water to drain away.Double width fibre inserts aid moisture absorption, and the performance scraper action of INTRAlux Elite Fibre prevents dirt and debris being carried into the railway station from the high volume footfall. With a large open entrance that is exposed to the elements, moisture and dirt absorption was a clear priority for the project.The interlocking sections of the INTRAflow Plus mean that installation is a simple process. Working with DMC Contracts, ease of installation was a key feature to avoid any delays – given the strict deadline and tight time-frame for the project. INTRAflow Plus is fully DDA compliant, allowing railway access to people of all mobility levels. As the station becomes one of over 60 step-free stations along the Overground Line, INTRAsystems has been able to further the efforts to ensure full inclusivity for all.Future proofAlong with the high functionality, durability and inclusivity features of INTRAflow Plus, its sustainable nature made it the perfect choice as Transport for London look to build for the future. The aluminium planks are 100% recycled, and the fibre inserts are made from ECONYL – 100% recycled nylon made from materials such as discarded fishing nets.With the Entrance Matting now in place, the new Overground Railway Station at Barking Riverside is now well placed to handle the high daily volume of foot traffic.

Fully certified products from the range of TBA FIREFLY™ have been employed to protect a potentially vulnerable roof-space above a doctor’s surgery in Chingford, Essex, ensuring any outbreak of fire could not spread to other parts of the building. The work on the property owned by Peabody Estate has been carried out by Wickford based T & R Fire Protection on behalf of another industry expert, LMAC Fire Systems, also from Essex. The two companies regularly cooperate on such projects as landlords continue to maintain and improve the fire safety performance of existing buildings.In the case of the Chingford surgery, FIREFLY™ Apollo Lite™ 30:30 was specified along with the manufacturer’s widely utilised Collaroll, High Temperature Adhesive and 12mm stainless steel staples. In addition to protecting the sides of the 2.8 metre high pitched roof-space, creating fire barriers and wrapping multiple beam ends with the Collaroll, T & R also installed one of FIREFLY'S Access Panel FR 120 units. These have been stringently tested against EN 1363-1 2020 and are third party certified by IFC, being shown to achieve an impressive two hours fire resistance from either side of a fire compartment. Intended to be fitted vertically, the heavy-duty construction of the Zintec steel door and unistrut frame ensures the assembly offers a tight and flush fit when closed, and robust performance in use.The Director for T & R Fire Protection, Tom, commented: “We’ve used APOLLO Lite™ and other FIREFLY™ products on many hundreds of projects in the past, FIREFLY™ is our ‘go to’ manufacturer when it comes to fire compartmentation. There are many older properties which have no fire compartmentation in their roof spaces and in the case of the Chingford doctor’s surgery, the landlord – Peabody – asked us to carry out an inspection and come up with a fire strategy. We base our recommendations and design drawings on FIREFLY'S standard details and, once they’ve been approved go in and install the fire barriers. The work involves breaking the loft-space down into a number of compartments with one of the Firefly access panels providing safe passage between them. The installation has gone very well, though there is a lot more of this type of work to be done across the country in many sectors.”The APOLLO Lite™ 30:30 has been developed for use in vertical separation or compartmentation situations, offering 30 minutes integrity and insulation and is straightforward to install for an experienced contractor. It is widely specified to form fire barriers within roof voids and floor voids in many different property types, including multi-storey flats and commercial premises.

A combination of factors, including high winds, freezing temperatures and widely varying stud centres led award-winning walls and ceilings specialist Sound Interiors to Euroform’s cement particle board, Versapanel.The Project: Gogarth School (Ysgol-Y-Gogarth), LlandudnoMain Contractor: Willmott Dixon ConstructionSubcontractor: Sound Interiors LimitedProduct: VersapanelSize: 1200mm x 2800mm x 12mmQuantity: 2,500 square metresThe ChallengeGogarth School (Ysgol-Y-Gogarth) is situated less than 300 metres from Llandudno Bay, with no barriers or windbreaks between it and the sea, making exposure to the elements particularly problematic. What’s more, the UK’s weather is becoming increasingly harsh and unpredictable. According to Met Office statistics, 2012 was the second wettest year since records began. And March this year was the coldest since 1962.John Sheeran, Contracts Manager at Sound Interiors Limited, said, “The biggest challenge of the project was the weather conditions we encountered over the nine-week programme. We were informed of the temperature dropping as low as -12 degrees on some occasions, not to mention the prevailing winds. On a few occasions our supervisor and I had no choice but to take the decision to abandon our works.”  John continues, “In addition, the majority of the steel framing we had to fix our boards to ‘installed by third parties’ had massively varying stud centres.”The SolutionBy specifying Euroform’s Versapanel, the fully external cement particle board, both challenges were overcome.Stud CentresThe varying stud centres issue was easily addressed by the availability of Euroform’s Versapanel in a 1200mm x 2800mm size. “Using this size board reduced waste that would normally be generated when using a 2400mm x 1200mm board,” said John.The problem presented by the inclement British weather and the close proximity of the sea was also resolved by Euroform’s Versapanel.Heavy RainfallThe British Research Establishment Centre for TimberTechnology and Construction, in their BRE Digest 447 Part 3, recommend cement particle board ‘where there is a special requirement for moisture resistance.’This requirement for moisture resistance doesn’t simply apply to a board’s performance in the completed building; it is also a critical factor during construction. Euroform’s Versapanel can be exposed to extreme conditions indefinitely and, even when soaked, will dry out and maintain its original robust performance.Freezing TemperaturesEuroform’s Versapanel is manufactured to BS EN 634 Parts 1 & 2, the British Standards that govern particle boards’ and wood-based panels’ tensile strength, mechanical properties, density, load factors and resistance to hard body impact. Moreover, and especially relevant to the Ysgol-y-Gogarth project, BS EN 634 Parts 1 & 2 govern a board’s resistance to frost.ConclusionA robust, versatile building board with the full support of the Euroform technical team, Versapanel proved to be the perfect solution to the challenges faced by Sound Interiors on the Ysgol-y-Gogarth project.

GRCA Full member Telling Architecture Ltd demonstrates how innovative 21st Century Modern Methods of Construction can be used to replicate 19th Century, Victorian inspired architecture. The key to authenticity when replicating historic construction methods or styles, is care and attention to detail. Get it wrong and at best you create a poor pastiche of a bygone era. This was the challenge presented to Telling Architectural that required them to develop further the techniques they have already established and utilised in the design and manufacture of brick faced GRC, to create convincing complex 3D forms.This £300 million project nestled between iconic 21st century London landmarks including Tate Modern and The Shard, comprises mixed use buildings that provide offices, shops, gallery restaurant and cinema adjacent to the historic and world-famous food destination Borough Market.This project identifies heavily and sympathetically with its Victorian past. Brick railway arches have been re-purposed to integrate with the facades of retained warehouses in addition to new contemporary architecture that is weaved in amongst connecting pedestrianised yard spaces that creates a refined reimagining of a bygone age.Telling Architectural Ltd continue to innovate and develop the capabilities of Glassfibre Reinforced Concrete. The addition of real brick facings provides the Architect/Specifier with a whole new range of possibilities that they can consider as a means to achieve their creative goals. There is a huge demand for the skills of a brick mason that can replicate the standard of detail and workmanship specific to this project. Unfortunately, as a result of an ageing workforce and low intake of new tradespeople, they are in short supply and come at a premium. The construction industry has had to evolve and adapt to find a solution to this problem, in addition to having to rethink its approach about the way we build. All these issues can be addressed and remedied by introducing off-site/premanufactured innovations that remove key elements off the critical path and in so doing deliver sustainable solutions in an on-time/just-in time basis.In most circumstances the go to solution would be to utilise traditional precast concrete, however using Brick Faced GRC provides significant savings in weight and use of raw material, which in turn can lead to further added benefits in both the extent of groundworks and design of the structural frame.  For Borough Yards London project, the challenge to fabricate masonry elements that include intricate features such as faceted columns utilising cant bricks, splayed sawtooth pattern beams with brick soffit returns, the term masonry cladding falls short in identifying what has been achieved on this project - this is façade engineering of an exceptional standard. Proof indeed of the opportunities Brick Faced GRC provides, not just for contemporary architectural styles, but also as a means to maintain and preserve a part of London’s Victorian Heritage.  Client: MB Bermondsey LtdMain Contractor: Wates ConstructionInstaller: LesteroseEngineer: EvolveArchitects: SPPARC ArchitectureScope of Work: 776m2 Brick Faced GRC Grade 18P  

An extension to a 16th century cottage, Holton Lodge in Halesworth, has utilised Catnic Urban to beautiful effect. This stunning property extension blends the old with the new to create a huge modern kitchen extensionA cost effective alternative to zinc, Catnic Urban steel standing seam roof and cladding met the desired aesthetics – with the quick fit system offering a fast and problem-free installation.Hilary and Robert Garner wanted to open up their existing kitchen with a build that used full height glazing to flood the area with light and give them an unobstructed view of their garden. In response, architect Tim Hannon, from Brooks Architects in Leiston, designed a contemporary extension that provides a stunning focal point, reconnecting the inside to out.“After we were convinced that Catnic Urban could achieve our desired aesthetic, our next concern was that the roofing and cladding could be exactly matched to the window frames and that the colour would stand the test of time. Again, we were assured of the system’s colour matching and stability credentials by everyone working on the project and we’re overjoyed with the result. Catnic Urban has really given the project the wow factor.”Hilary and Robert GarnerHolton Lodge ownersThe vaulted roof was designed to bring drama to the space, with a ridge that was purposely higher than the roof of the main house, so visitors are instantly given a glimpse of the striking design as soon as they approach the house. An overhang provides a covered outside eating area and works to reduce solar gain, with the sleek lines of the standing seam continued down the side of the extension, which is wrapped in matching cladding. Typical of the area, the design also includes a lean-to roof on an area that houses the utility room and cloakroom.“I’ve worked with Catnic Urban on a number of projects and particularly like the fact that it is fully recyclable at end of life. The ease of installation also instils confidence that there will be no problems at fitting stage and the technical support offered by the Urban team is also excellent, with a good level of technical detail provided on abutments and ventilation, so that all the work is neatly finished.”Tim HannonBrooks ArchitectsCatnic Urban steel standing seam roofing and cladding in Anthracite Colorcoat HPS200 Ultra was used across the project, recommended by project contractor Kerslake Construction Ltd, as a cost effective alternative to the zinc roof initially specified, when cost became a concern. “If a customer wants the look of zinc without the price tag, I recommend Catnic Urban”, said Jon, “and in most cases as soon as people look into the product they switch, as it looks great, achieving really smooth, clean lines that flow beautifully.”Catnic Urban’s recommended contractor Steel Roof Installers UK was commissioned by Kerslake Construction to install the roof, as they have worked together on similar projects in the past. After attending a training course back in 2010, owners Chris Bates and Andy Morris were soon turned onto the benefits of building with Catnic Urban and now exclusively work on Urban projects.Catnic Urban (previously known as Colorcoat Urban) is a fully supported standing seam system designed, manufactured and CE marked in accordance with BS EN 14783:2013. Quick build times are possible with neat crisp finishes to complement design and build choices. Manufactured from Tata Steel’s Colorcoat HPS200 Ultra®, and also available in Colorcoat Prisma®, Catnic Urban is a cost-effective alternative to traditional copper and zinc standing seam roof systems. Seven times lighter than tile equivalents, it is easy to handle on site and quick to fix compared with traditional roofing products.

Among many similar new-build projects completed or underway across the country, non-combustible Rockpanel is providing stunning facades for this eye-catching, contemporary urban living in Bracknell, Berkshire, while meeting the stringent regulations regarding fire-safety in high-rise residential structures.Consisting of 242 apartments divided across two distinct angular blocks of up to 11 storeys, this residential scheme promotes itself as heralding a new era in luxury living for the region. The wedge shaped blocks are placed at angles to create a broad, elegant thoroughfare where seating invites residents and others to linger and enjoy the landscaped surroundings. Stepped elevations allow for generous terraces to one block while the acute angle formed on another results in striking feature balconies. The mix of sleek white render contrasts well with the Rockpanel Woods facades which add a natural, organic warmth. Meeting challenges to create a landmark development The Building Design Group were architects for the project. With offices in Birmingham and Tamworth, BDG has evolved from its inception more than 45 years ago, in to a dynamic, forward thinking practice. Describing the development, they said, “BDG were appointed following a successful planning process to develop this project further to tender stage and beyond. The site itself presented numerous challenges in terms both of access and existing constraints located above and below ground. However, we believe we succeeded in progressing the technical design to the extent that our client's aspirations could be met, both in terms of cost and the desire to establish a landmark development for the future.”Vascroft Contractors Ltd were main contractors for the development. The London-based firm has grown from its founding in the 1970 by two brothers, into a thriving concern made up of four divisions working on projects across all major building sectors. Around 2500sqm of facades were installed at Grand Exchange, using a mix of Rockpanel Alder and Slate Oak surface designs from the manufacturer’s super realistic Woods range, along with RAL 2010 colour-matched deep orange accent panels. Versatile, resilient and sustainable design freedom Lightweight and highly versatile, and without the need for additional edge sealing, Rockpanel can be curved, perforated, engraved or routed, and will last for decades with minimal maintenance. Protect Plus further protects the panel surface from everyday wear and tear. The facades deliver outstanding performance characteristics which include fire safety, supreme durability, weather, temperature and UV. And when the time comes for a Rockpanel facade to be replaced, in fifty years or more, the removed panels can be recycled into new boards with no loss of quality. Versatile, resilient and sustainable design freedom Lightweight and highly versatile, and without the need for additional edge sealing, Rockpanel can be curved, perforated, engraved or routed, and will last for decades with minimal maintenance. Protect Plus further protects the panel surface from everyday wear and tear. The facades deliver outstanding performance characteristics which include fire safety, supreme durability, weather, temperature and UV. And when the time comes for a Rockpanel facade to be replaced, in fifty years or more, the removed panels can be recycled into new boards with no loss of quality. Stoneguard Managing Director, Nic Constantinou, spoke about the project, “Vascroft approached us early on in order to begin the design process and ensure the smooth delivery of panels throughout the build. The 11mm Rockpanel FX-Xtra System specified by the architect, with grooves at 300mm centres achieving the effect of wood planks perfectly, meeting the aesthetic requirement for the project, while offering the long-term performance and low maintenance advantages of Rockpanel. Although the majority of panels were cut off-site, the flexibility of Rockpanel meant the more complicated architectural features of the build could be cut to size on site easily. The lightweight nature of the material ensured it could be distributed swiftly around the complex shaped build.” The ultimate facade systemThe facades were fixed to a concrete frame with bespoke Protec SFS system infill, which Stoneguard design and manufacture themselves. The project also utilised FSI cavity barriers and ROCKWOOL Duo Slab® insulation, which offers great thermal and acoustic values and achieves European fire class A1. Combined with Rockpanel A2 and an aluminium or steel substructure it fulfils the most rigid fire safety requirements and is required in achieving A2-s1,d0 Euroclass rating to secure the ultimate protection and safety for the building’s users.Rockpanel facade panels and ROCKWOOL insulation products share common characteristics, including their inherent sustainability and non-combustibility, which is due to the naturally occurring and replenishing volcanic rock used in the manufacture of the stone wool that forms their core. Grand Exchange Building Manager, Adam Spiers, “I must commend the design team for their outstanding work on the facades of the building. The exterior looks stunning. The attention to detail and the architectural finesse are truly commendable. The residents are exceptionally pleased with both the building and its exterior. Their positive response reaffirms our belief that the Grand Exchange has not only met but exceeded expectations in terms of design and functionality.”Rockpanel offers specifiers design freedom, enabling virtually unlimited colour matching and an unrivalled range of surface design finishes, from the super-realistic natural Woods used at the Grand Exchange, through Metals and Stones collections to specialist ranges including unique, transformative Chameleon, which changes hue depending on the way light hits its surface and the angle of view. 

FORBO’S FLOORING ELEVATES THE SUSTAINABILITY ETHOS IN NEW ECO-FRIENDLY PRIMARY SCHOOL  Two Rivers primary school in Keynsham, Somerset, is only the second school in the country to achieve Passivhaus Plus accreditation. To achieve this impressive milestone, architects Hatcher Prichard had to make conscious choices when it came to choosing materials for this project. With outstanding sustainability credentials and a wide portfolio of solutions suitable for the education sector, Hatcher Prichard specified a variety of Forbo Flooring Systems’ contemporary floor coverings, including its Tessera carpet tiles, Sphera and Eternal vinyl floor coverings, as well as both its Surestep and Safestep safety flooring. A new build primary school for 420 pupils, Two Rivers Primary School was designed to add the much-needed provision for primary education to children in the Keynsham area, whilst also following sustainable building practices. With the requirement to achieve Passivhaus Plus accreditation, which meant the building had to produce as much energy as the occupants use, Hatcher Prichard had to carefully consider the materials used in the construction of this building.  Simon Hatcher, Director at Hatcher Prichard explains further: “Two Rivers achieved Passivhaus Plus accreditation in February 2023 and is only the second school in the country to do so. It is also the first to be built using standard building materials, including a steel frame with concrete floor slabs. When it came to specifying materials for the building, we looked for manufacturers that had strong sustainability credentials. With Forbo’s environmental goals so aligned with our own, and that of the building as a whole, it meant they were the perfect fit! In fact, Forbo’s sustainability credentials and flooring solutions were key to finishing this wonderful building.” However, as well as the sustainability objectives that Simon had to keep in mind, he also had to meet the design requirements. Simon commented on this, saying: “We were supplied with a document by the Department for Education on the Employer’s Requirements, which includes a section on floor coverings and the factors to consider when specifying materials for schools. The main area of consideration though was the functionality of the flooring; it had to withstand the heavy foot traffic we would expect to see in a school, whilst also being easy to clean and maintain.  “Additionally, the floor coverings needed to be installed seamlessly alongside each other to keep the joints between them flush, as well as provide some slip resistance. The chosen floor coverings also had to be suitable for the usage of each room, with the colourways used also needing to be appropriate for the age of the children using the space. The Forbo account managers really helped with this, thanks to their understanding of how specific products from Forbo’s portfolio met the individual requirements of each room in the school.” With the suitability of colours in mind, Simon looked to incorporate elements of the local environment into the design, as well as take inspiration from the school name too. He explained: “The design of the school draws from its location at the heart of Hygge Park, Keynsham. The surrounding area has a calm, Scandinavian palette of colours and materials, with the local houses made from light buff brickwork with white render above. We opted to use matching buff brick and white render externally, with complimentary blues, greys and whites for the walls and other surfaces inside. All the floor finishes were supplied using the contemporary and durable range of Forbo products required for each individual space. For example, Forbo’s Eternal vinyl was specified in the Washed Beech wood décor for the hall, hall store, studio and servery areas, which provided a natural contrast to the white paint on the walls, without being too distracting. “We also specified Forbo’s Sphera homogenous vinyl in a clear blue colourway, to represent the ‘two rivers’ of the school’s name, which runs along the ground floor corridor and extends back up along the first floor. We also used Forbo’s Eternal vinyl in the Smoke colourway for all the ground floor classrooms, which created a calm and neutral feeling.” What’s more, a selection of Forbo’s Tessera carpet tiles were chosen in a muted blue colourway for the first-floor classrooms, which helped to make them feel bright and spacious. Speaking on this decision, Simon said: “With the first-floor classrooms designed for the older students, we felt it would be more appropriate to use a textile flooring, as opposed to the vinyl flooring used in the Key Stage 1 classrooms. As such, Forbo’s Tessera Teviot carpet tiles were installed in the Mid Blue and Blue Moon colourways, both of which fit the colour theme running throughout the school. Additionally, the Tessera carpet tiles are really easy to clean, another requirement set out in the brief, so it ticked all the boxes.”  In addition to the above, Forbo’s Surestep and Safestep safety flooring were used across the project to ensure the safety of students throughout the building. Specified in the Smoke and Silver Grey colourways to match the colour scheme, the safety floors were installed in the wet rooms on both floors, as well as in the DT classroom on the first floor.  Simon concluded: “We’re really happy with the finished project, as are the school and students’ parents. The school held an open evening in mid-January where the Head and Deputy Head showed visitors around the building; both were delighted with every aspect, especially the hardwearing finishes throughout.” With the initial design stage beginning in August 2020, the school was completed in December 2022 and opened for students shortly afterwards in the new year. To find out more about Forbo’s offering for schools, visit: www.forbo-flooring.co.uk/education