"shower fittings and controls"

Efficient Approach Dramatically Reduces Turbine Noise at CCGT Power StationsTen years after it was first used at Uskmouth, this innovative approach to soundproofing that reduces insulation depth by up to 76%, is once again commissioned in France.Dangerous Levels of NoiseModern dry cooling systems offer many benefits over traditional systems in CCGT power stations, but they have the disadvantage of being a complex source of noise transmission. The turbine noise recorded coming from the dry cooling system at the Severn Power CCGT Power Station at Uskmouth was between 130dB(A) and 135dB(A). Exposure to these levels of noise, a full 50dB above The Control of Noise at Work Regulations 2005 “upper action level”, will cause both immediate and permanent damage.When acoustics and soundproofing specialist, CMS Danskin Acoustics, were brought in by SPX Cooling Technologies, designers of Uskmouth’s dry cooling system, they discovered not only high levels of noise but also that the noise generated had a very low-frequency bias, the most difficult noise spectrum to treat.Solutions for low-frequency noise issues typically involve wrapping the problem in significant quantities of acoustic insulation, with many standard solutions being as deep as 500mm to 700mm. The sheer volume of lagging required for an insulation-based approach to a project like Uskmouth, with 8,000m2 of ducting to be covered, would be expensive, time-consuming to install and prohibitively disruptive.The New Approach proven at UskmouthThe challenge of producing a soundproofing system that would be cost effective and efficient to install was taken up by CMS Danskin Acoustic’s Technical Direct Paul Absolon. CMS Danskin has a reputation for effective, high quality acoustic solutions tailored to the specific challenge, and this solution was no different.Exploring the wide range of acoustic materials from the company’s industrial acoustics range, Paul opted for a combination of materials working in concert: the unique CMS HTIB elastomeric isolation pads, constructed from a polyurethane-bound rubber granulate with excellent dampening and isolation characteristics; QuietSlab SVX3, a high-performance, mineral- fibre acoustic lagging; and WBKT Acoustic Barriers, a high-density, barium-sulphate-loaded thermoplastic polymer, which is thin, flexible and easy to work with.By using a bespoke combination of materials which each tackled specific aspects of the problem, CMS Danskin Acoustics were able to create a soundproofing solution with a construction depth of just 170mm, between 66% and 76% thinner than the 500-700mm standard solution. Disruption was minimised and material costs reduced.Once complete, the system was rigorously tested by SPX Cooling Technologies and Uskmouth’s main contractor, Siemen’s Energy. CMS Danskin Acoustics’ solution had reduced the noise generated by 39%, to just 82-83dB(A), under the 85dB “upper action level” listed in The Control of Noise at Work Regulations 2005.Peter Ullrich, project director, Siemens Energy, commented at the time:“Effectively controlling noise and reducing sound emissions was a top priority for us in the Uskmouth project. Not only was it essential that the dry cooling system satisfied all the legal acoustic obligations and regulations but just as important was that neighbouring properties were not disturbed by additional noise levels.”Repeat Success at LandivisiauTen years on, the same successful approach has been applied to the dry cooling system at the new CCGT Power Station at Landivisiau in Brittany, north-western France. Also built by Siemens, the dry cooling system was supplied by SPG Dry Cooling. In the case of Landivisiau, even greater sound reduction was required, from approximately 140dB(A) to below The Control of Noise at Work Regulations limit of 85dB(A).To meet this challenge, SPG and CMS Danskin collaborated on extensive testing at the acoustic testing laboratory of SRL Technical Services. The reductions achieved during testing as part of the specification process were some of the largest reductions in sound ever measured at SRL.Once the specification was confirmed, CMS Danskin worked with SPG to ensure that materials for the multi-layer acoustic solution were prepared and delivered efficiently so that SPG’s installers always had the correct materials on site. The installation of the acoustic soundproofing was completed in October 2021 and the power station entered commission as planned in April 2022.“CMS Danskin Acoustics Limited successfully supplied the acoustic material package for the project which was tested at SRL to give an overall lab test reduction of 68dB Rw.”Robert Hill, Project Manager, SPG Dry Cooling

ABOUT CURRAGH:Nestled in the glorious countryside of Southern Ireland sits the Curragh Race Course. Initially founded in the coffee rooms of Kildare, the Irish Turf Club was quickly established as the governing body for horse racing throughout Ireland.The first recorded race on the plain took place in 1727 and now Curragh (from the Irish name ‘Cuirreach’ meaning ‘place of the running horse’) is home to Ireland’s five classic races.ABOUT THE PROJECT:The Curragh site has recently undergone a 65 million Euro redevelopment project across its entirety. Works carried out included the stable yard (featuring 135 stables) and the building of a brand new grandstand with a spectacular sweeping roof. Covering 10,500 square metres the new grandstand can cater for up to 6,000 people within its four levels – in fact, the site as a whole, has an incredible crowd capacity of 30,000 - which is a typical number for events such as Derby Day!Visitor enjoyment and responsible ‘crowd’ control during any event at Curragh are equally important to the site owners and managers; therefore, all aspects of this were to be considered carefully during the planning stage of the redevelopment. Ensuring an event at Curragh is a pleasurable experience takes a lot thought and care. Aspects such as creating the right atmosphere for the different areas and ensuring that everyone can hear race commentaries and announcements, all form part of the overall impression of the day’s event. Taking great lengths to provide all visitors with a memorable day is likely to encourage them to return again in the future.To carry out the works required, a selection of top consultants were selected for the different aspects of communication throughout the site. Dublin based, Sound Productions Ltd was chosen to design and commission the PA/VA and EVC, as well as the TV and other audio distribution systems required for the Curragh buildings and surrounding grounds.The brief to Sound Productions was to supply a flexible multi-zone audio and voice alarm system with top quality audio. The specification was for a complex zone arrangement, with multiple audio inputs from broadcast companies, live commentary, background music and TV audio distribution. This included the requirement for a 98dB sound level trackside, with absolute intelligibility throughout all areas (including those with high reverberation) and, for this, a highquality PA/VA system was needed. It was imperative that these works were delivered on schedule, with ‘quality’ to be considered as the prevailing factor, without exception, throughout the project.The PA/VA system was to be delivered over two phases – the first one being the system rack for the Parade Ring; the second to be the New Grandstand, including two main Baldwin Boxall PA/VA VIGIL control racks delivering power to a network of EN54 loudspeakers. The specification for VIGIL to be the PA/VA system for Curragh was due to Baldwin Boxall’s renowned reputation for product quality and reliability, as well as the company’s excellent track record for the delivery of large projects.Now fully installed and operational, the PA/VA system is equipped to cater for up to 24 analogue and 32 digital audio channels all distributed to over 50 zones. Multi-zone general paging is also delivered using Baldwin Boxall’s BVRD TSM touch screen microphones along with BFM series microphones for emergency purposes.The project’s requirement for disabled refuge call points has been fulfilled by the installation of Baldwin Boxall’s Omnicare EVC system, which is controlled via a 16-way control panel situated in the Security Room.Commenting, Peadar Carley, Project Engineer, Sound Productions said “We are delighted to have been involved with such an amazing project. We have a long-standing professional relationship with Mercury Engineering (the project electrical contractors), who share our ethos of being very particular with detail and passionate about providing the best quality. To know that we were chosen due to our ability to deliver large, complex systems and for our audio knowledge, makes us very proud indeed.”When asked about Baldwin Boxall, Peadar continued, “We have been buying, installing and commissioning Baldwin Boxall products for very many years - over 30 in fact. The systems just keep on going - they really are robust! But it is not only for this reason that we return to Baldwin Boxall repeatedly, but also because of the support we can get from them. They know their stuff, are easy to deal with and I recommend them without hesitation.”

Isolating Hotel Rooms from RestaurantsPreventing noise transmission between the noisy areas of a building to the quiet areas is an ongoing challenge. When the quiet areas are people sleeping and the noisy area is a busy hotel dining room, the problem is particularly acute, but can be resolved by using the appropriate products which are cost effective and easy to install correctly.The ProjectPremier Inn Scarborough North is a new build 105 room, 5-storey hotel with a 68-cover restaurant, which was completed in March 2021. The new hotel was granted planning permission in 2018 and construction was slightly delayed over the Covid lockdown period.Owner of the Premier Inn brand, Whitbread, continues to see strong growth with their UK business continuing to outperform in the midscale and economy market and now has over 800 hotels in the UK. Key to the brand’s message is that wherever you stay in a Premier Inn, you will always get great levels of comfort.The ChallengeSources of noise which affect hotel guests include:External sources of noise and vibrationTransmission between rooms and between rooms and corridorsTransmission from engineering systems (ventilation and air conditioning, heating systems, lifts and so on)Transmission from public areas – reception, conference facilities and in particular restaurants.Noise transmission from restaurants, bars and reception areas becomes a significant challenge where the design of the hotel incorporates these areas on the ground floor of a block, with hotel rooms directly above.Reducing the transmission of noise from a large common area to individual hotel rooms rests principally on isolating the plasterboard or suspended ceiling. To overcome this challenge, a frequent recommendation is to design a ceiling incorporating neoprene isolation hangers.Neoprene Isolation Hangers for HotelsNeoprene isolation hangers are primarily used to isolate suspended sources of audible frequency vibration, such as piping and ductwork systems. They also provide very effective vibration isolation for hanging acoustic ceilings by preventing transmission of noise to the building structure.The isolation hangers supplied for use in the ceiling at Premier Inn Scarborough North were Isogrid Quick-Connect Ceiling Hangers, supplied by CMS Danskin Acoustics.The IsoGrid Quick Connect Ceiling Hanger has a specially designed dual deflection neoprene isolator which allows internal bulging. This enables the neoprene element to achieve greater deflections whilst maintaining lateral stability. Greater deflection translates to greater performance for noise control ceilings.IsoGrid Quick-Connect Ceiling Hangers have several other benefits:They are more cost effective than similar products;The simple design makes them quick and easy to install, providing significant labour savings over conventional sound control ceiling hangers;The known deflection rates ensure acoustical performance under design loads;Tested for airborne, impact and frequency performance to BS EN ISO 10140 requirements;Various attachment methods allow for installation on a variety of ceiling structures, including concrete, metal deck or structural framing;A bronze core serves to prevent poor acoustic performance due to over compression or due to accidental short circuiting of the transmission pathway.InstallationThe ceiling was installed by specialist contractor B W Shrimpton Limited. This was the first time that Shrimpton’s had used IsoGrid hangers, but they were well received.Supervisor Kirk Talbot, who has worked closely with the CMS Danskin Acoustics Team on several projects, explained his preference for the hangers is very much about the ease of installation:“We used Hilti pan head HUS fixings into the soffit for fixing them up, and the lads on site had no issues with them at all.“The IsoGrid hangers are definitely robust enough and easy to fix angle or wires to. On that basis and the cheapness compared to other hangers out there, I’d definitely use them again and will recommend that others do too.”Kirk Talbot, BW Shrimpton LtdTechnical Advice on Acoustics in HotelsCMS Danskin Acoustics are specialists in soundproofing materials and acoustic insulation. Our expert technical team can advise on the specification of a wide range of specialist acoustic and vibration control systems – balancing performance, aesthetics and budget. We provide solutions to treat floors, walls and ceilings, as required, delivering a holistic design approach to sound control for the complete gym or sports hall environment.We don’t just design, manufacture and deliver market leading products. We work with the entire supply chain and project teams to ensure a smooth path from conception to completion.

Accoya selected for the renovation of the GeoSouthern Energy’s corporate headquarters. Distributed by Mason’s Mill & lumber, the Accoya cladding was milled into a Vanish Rain Screen profile with a walnut stain for the exterior of the building. Various sizes of Accoya were used ranging widths between 5”-8”. In total 80 m3 of Accoya was used for the project. Accoya was chosen due to its stability & durability making it the perfect fit for designers Kirksey.

The second tallest building in the United Kingdom, and tenth largest building in the world is home to an impressive amount of BLÜCHER EuroPipe! All 62 floors are equipped with stainless steel drainage, from RWP, SVP and food vacuum systems to interceptor foul drainage and disconnecting traps for rainwater.The project spanned over two years, and it was a no brainer that our lightweight, adaptable and push fit system was chosen as the sole supplier.

A dated conservatory area is transformed by Breezefree with a retractable glass roof and polycarbonate curtain walling. Nagan Johnson Architects approached Breezefree to refurbish a dated conservatory area as part of the fit-out of the Cuban restaurant group’s second site in London’s Smithfield district. The brief required a modern retractable glass roof, to replace the old lean-to rooflight, and translucent curtain walling, to replace the dilapidated brick walls and windows...

ASF's Building Protection Corner Bollard was used in the above project. The bollard is set up so that there is one quarter missing on the upright plane so that it fits perfectly on a 90 degree outside wall. The pattern can be adapted to other angles if necessary. Once in place the bollard acts as a wheel buffer for any vehicles getting too close to the corner - thus reducing the risk of damage to either the building or vehicle.

Extensive use of parapet capping from the Pendock Linea building linings range has helped improve weather resistance and aesthetics at a modern student accommodation building in Kingston-upon-Thames.Bespoke manufactured from high quality aluminium with a grey PPC finish, the flat PC-F style parapet capping's are fitted to the entire building to improve the integrity of the flat roof and stop the ingress of water.

DescriptionModel: Vimec Easy Move cabin liftStops: 2  Type of building: Private House  Country: South Africa  The customer’s desire was to have a lift that would allow him to move around comfortably and stylishly. After an on-site talk with our partner, in order to fit well into his home design, the customer sought a modern and robust solution like Vimec Easy Move homelift.

Like many workplaces, a good cup of tea is a necessity for the staff at Wiltshire Council and, after years of faithful service from their older generation Zip HydroTaps, Wiltshire Council’s drinking stations were due a refresh. A new mains-fed drinking water system was required that could meet the hot beverage demands of all the council employees, at the same time as fitting the building’s energy saving criteria.

Sophisticated and contemporary office designs means ensuring perfect and seamless integration to complement the space.The creative brief for this design focused on embracing the intricate architectural details of the space such as the natural shapes and overall industrial vibes.Vtec's SupaSlat System and MaxiBeam Systems were specified in this unique office fit out. With such large zones, the team achieved the precision that was required, with 3D modelling to ensure precise coordination, positioning and integration.

A satisfied customer has returned to Union Industries for the fitting of a second high speed industrial door to enable it to keep production noise to a minimum, while transporting raw materials and products in and out as efficiently as possible.Arbor Forest Products, the UK’s leading independent timber importer and processor, which is based in Barrow Upon Humber, offers a bespoke milling service with the ability to process orders in 10 days.

application area: commercial heatinguse type: industrial condensing boilersproject scope: preserve rectangular flue shape and maintain lined diameteradded value: quick and efficient installation with minimal downtime and disruption to the building structureBackgroundTwo new high efficiency condensing boilers fitted into the basement of a nine-story office block (Dublin Civic Offices, Ireland) using two separate brick lined chimneys that rose through the nine floors and exited on the rooftop.The brick chimneys posed a problem as the chambers measered 300mm x 450mm no standard 350mm flue liner would fit. Due to the pliability of Furnflex, the liner was able to take up an oval shape in the chamber giving it the full 350mm required. This building is an extremely busy high-profile office block therefore minimum disruption to day to day business was required.Statement of workFollowing an onsite survey, Furanflex was deemed the ideal solution to line both chimneys. The installations were carried out over two weekends, one for each chimney, with no disruption to the office operations. The project completed on time and within budget.

Project: Manufacture and installation of bespoke concrete cladding in a high-tech media room. The design comprised of floating 3D concrete seat wrapped around the fire place and individually sized concrete panels for chimney breast, wall, floor and ceiling. All panels were fitted using mechanical and chemical fixings.Client: Tigg & Coll Architects  Materials used: Large format Plain and GAP GRC panels in Rough Mist finish and sealed with hydrophobic agent and clear sealant.On this challenging project we worked closely with Tigg & Coll Architects to manufacture and supply bespoke concrete cladding for new multipurpose media room.The large format bespoke Plain and GAP concrete panels were cast to the client’s individual and unique specifications using our BTX Ultra High Performance Concrete mix with a hydrophobic agent to limit moisture absorption. The panels were cut to fit around the fireplace, floor, walls and ceiling and then treated and sealed to make them stain proof.The finished effect is a modern, industrial look that complements client’s design style and creates a truly unique and highly relaxing space.

Lewis Deck was chosen, on this particular project in London, for a number of the key benefits the system brings. These being the strength of the system with only needing a thin concrete screed on top, the acoustic qualities & vibration control properties and the speed an ease of installation. This project even requested much longer sheets than standard in an effort to speed up the installation process. In fact you can see from the main photo above that some of the sheets were extremely long. The longest being just over 6.5m.This project was the installation of a new suspended, loadbearing concrete floor above an existing floor below. The space being used as a plant room for the hospital. The Lewis Deck was installed over a suspended steel grid of Light Gauge Steel C-section joists. A thin concrete was then installed over the top.This was a quick installation with the Lewis Deck being installed and then used as a safe working deck ahead of the screed being pumped in.

Battersea Dogs & Cats Home was established in 1860 by Mary Tealby as the Temporary Home for Lost and Starving Dogs. Since it opened, the charity has cared for more than 3.1 million dogs and cats. To increase capacity at their old Windsor site BDCH are adding a new wing.The animal charity required specialist doors for a new intake building which includes 27 kennels and 4 maternity kennels.Dortek supplied hygienic hinged doors with Stainless Steel frames throughout the new building. Some doors also had automations and access control locks for ease of access and increased security. Fire doors with 30 minutes certification were also supplied for the protection of animals and staff throughout the facility.The GRP construction of Dortek doors makes them easy to clean, waterproof and extremely robust. They are ideally suited to animal care facilities requiring a low maintenance design.

The Scottish Salmon Company is the leading producer of quality Scottish farmed salmon operating across the West Coast of Scotland and Hebrides.The Scottish Salmon Company is the leading producer of quality Scottish farmed salmon operating across the West Coast of Scotland and Hebrides. The company required upgraded door systems at their processing facility in Stornoway. Dortek supplied Novosprint high speed doors and Metaflex sliding chiller doors to facilitate the segregation of production areas for hygiene and temperature control. The short opening and closing times of the Novosprint door which has speeds of up to 5 m/s, was used to help improve hygiene and operational efficiency, prevent unnecessary heat loss, and significantly reduce energy costs. The Metaflex sliding chillers doors were specified due to their airtight seal which eliminates draughts or leakage. The door also has a hygienic finish for food safe environments and automatic operation for easy access.

Challenge: Concourse Village Plaza houses apartment blocks, retail shops, a multiplex cinema and underground parking. Chloride ingress and weathering has taken its toll on the structure with cracking and spalling of the concrete cover from reinforcement corrosion.Strategy: Significant concrete repair in conjunction with an ICCP system was needed for the structure. LoCem® +chase®, will be used specifically for reinforced concrete structures, where the ICCP anode mortar operates within slots cut and holes drilled strategically into the reinforced concrete structural elements. LoCem® is a low carbon cement alternative that can also act as a cathodic protection anode.Outcome: With the design of the ICCP for the Central podium completed, construction will begin in 2023 before moving to the West and East podiums. The project and is expected to go on for the next 2.5 years. The result of the project will be an ESG compliant strategy that will create a more resilient structure, utilising low carbon build materials that can control the impact of corrosion.

Architect: Faulkner Browns ArchitectsInstaller: Topfix InteriorsProduct: ‘Shiluvit’ by Oranit1000m2 of PEFC Certified Shiluvit panels from Oranit were installed to the ceilings of the swimming pool and gym areas at the new sports facility St John’s School in Leatherhead.Faulkner Brown Architects specified Yellow Pine panels with a white stain for the space, choosing 7-502 modules with 22mm wide by 45mm deep blades with 40mm gaps for impressive acoustic control.Oranit is a specialist ceiling solutions suitable for most installation areas. As standard it is impregnated for Euroclass B,s2-d0 for resistance to fire, achieving top results against surface spread of flames, smoke production, and flaming droplets or structural integrity in case of fire.Additionally for this installation the panels were lacquered for humidity resistance, this treatment provides additional protection to the wood against water damage and can also be used for panels being installed outside.

Turning a roofscape into a power station just got better. The combination of GreenCoat PLX with integrated, almost invisible solar functions to deliver green energy and good looks. The solar modules are bonded directly onto the metal roof within the controls of a factory environment at Metal Solutions Ltd, Bolton. Lightweight and maintenance free with no access requirements for cleaning the solution is a real game changer. Each module is 358mm wide and sits between the Snaplock® standing seam profile. In harmony with GreenCoat Mountain Grey the solar modules are virtually invisible from the street. A traditional Glass Crystalline module would add substantial weight, wind sheer load on the standing seam fixings and require access for bi-annual cleaning with the then risk of damage during that process.The thin, flexible solar modules do not detract from the design of the house and offer an excellent yield even in low light conditions.

Set in beautiful grounds this former coach house is nestled in a picturesque Cotswold village.This stunning orangery was the perfect solution for the family who wanted to have a light filled room, from where they could sit and enjoy their garden throughout the year.The stone-coloured exterior paint finish of the David Salisbury orangery is the perfect complement to the sandy-coloured Cotswold stone and stone roof of the main building.The glass lantern benefits from Pilkington Activ™ Blue self-cleaning glass, which has both self-cleaning and solar-control properties plus high performing thermally insulating Pilkington K Glass™ S as the inner pane of glass.The result of this carefully designed addition to a home that already oozes character and charm is a light filled environment that can be use throughout the Summer and Winter months, where the family can sit in total comfort.Images courtesy of David Salisbury.

The original main entrance door to a residential block posed significant challenges, being both unstable and unreliable, ultimately leading to a less-than-ideal user experience. Recognising the need for a substantial upgrade, our focus shifted towards implementing a solution that could withstand the diverse demands placed upon it by the building’s occupants.In response to these requirements, we introduced a robust commercial door section that not only provided enhanced security and stability but also offered unparalleled reliability and durability. This new system was meticulously designed to ensure ease of operation for the end users, effectively addressing the previous difficulties they had encountered. Furthermore, by seamlessly integrating with the existing access control infrastructure, our solution not only facilitated smooth transactions but also offered cost-effective servicing options for ongoing maintenance needs. Through this comprehensive approach, we successfully transformed the main entrance into a secure, user friendly gateway that met the diverse needs of the residential block’s occupants.

Ascent Rooflight Covers were specified by Eurosafe Solutions as part of a Safe Access strategy to allow maintenance personnel to frequently access the roof areas to undertake Planned Preventative Maintenance (PPM) works at an office / warehousing premises in Orgreave, Sheffield. The Ascent Rooflight covers are a freestanding unit that sits above the potential fall hazard of the glazed rooflight. Formed from an angular aluminium framework with mesh infill the rooflight covers do not overly restrict light penetrating the rooflight. The Rooflight covers are supported on small spreader plates which provide a non-penetrative support solution on the flat felt roof. The Ascent Rooflight covers are testing in accordance with ACR(M) 001:2014 Test for Non-fragility of Large Element Roofing Assemblies (fifth element) and manufactured following 1090 factory production control procedures allowing CE/UKCA marking as required with all Safety critical components as per the Construction Product regulations 2022  

Eden at New Bailey, aka A3 Salford located in Salford, Manchester is Europe's largest living wall. The living wall wrapped on all elevations across the façade was designed, supplied and installed by Viritopia.The living wall is designed with modular plants with an ivy veil with a mix of trailing and climbing plants, almost acting as a camouflage to the building as a whole. The species of ivy has been carefully selected for its hardiness and seasonal appearance. This living wall will absorb and filter the pollution and carbon in the atmosphere, enhance biodiversity, attenuate rainwater, reduce noise and provide biophilic benefits for the health and wellbeing of the users.This 3,900m2 green façade has a 20,000 litre self-sufficient rainwater harvesting tank, helps control the urban heat island, and took around 10 months to install. Eden is also increasing the BNG by 174% with this project, with over 16 tonnes of soil and 33 different plant species and 350,000 plants in total helping it along the way.

In late 2016, the Francis Crick Institute was opened by The Queen and The Duke of Edinburgh. It is the largest biomedical research institute under one roof in Europe, allowing in over 1500 scientists and support staff everyday.The striking landmark sits next to London’s St Pancras Station, with floor space approaching one million square feet over 12 floors. To achieve an ‘excellent’ BREEAM rating, the Crick was developed minimising environmental impact to be highly sustainable.ChallengeDesigned by HOK and PLP architects, the building is highly complex with a significant specification. To support scientific research goals while promoting public engagement, Francis Crick aimed to encourage interaction between scientists with an open feel layout. With this, it also needed to be accessible for public lectures, exhibitions, and a teaching laboratory therefore posed a high security risk towards entrance control.To find out more please follow the link. Francis Crick Institute - Case Studies - Meesons

1,000m of red and blue double skin FAIRs (factory assembled insulating rooflights) provide an even and diffused daylight spread in Middlewich environmental hub in Cheshire. The hub operates as a multi-use site and the angled composite panels were fitted to a recycling centre as well as a vehicle workshop. The FAIRs were manufactured to to meet the specific light transmission requirements stipulated by the customer and specified to meet insulation fire and safety requirements.

In the nursery toilet cubicles, Bushboard’s Tiny Stuff range was chosen with colours including Buttermilk, Winter and Bayleaf. The staff chose Solid Surface wash troughs in Celestial to compliment the soft colour palette.The sports building at Croydon High School was also fitted with new toilet cubicles and ezeeduct panelling. The project was completed with perimeter benching in SGL and wall mounted coat hooks.Read the whole case study on our website.

Above food preparation areas, the existing rooflights needed replacing, but it was vital no broken glass could ever enter the production chain for obvious reasons. Our PlasGard patent glazing system combined with ‘unbreakable’ multi-wall polycarbonate was the obvious solution. Ventilators were fitted with fly-screens to prevent insects entering the building as again everything had to be done to prevent contamination of the food-stuffs being produced below.

When Bodmin Community Fire Station in Cornwall needed a hardwearing, hygienic, and safe flooring solution for their fitness room and gym, they turned to international flooring specialists Gerflor. Its’ Taraflex® sports flooring was supplied and would deliver to the highest standards required by the site users. In acknowledgement of the brave and hard work of Cornwall Fire Service crews, Gerflor donated 60m2 of this world-renowned sports flooring in the colour ‘Red’.

The Hepworth Gallery required access to their low pitched roofs to facilitate safe working at height when carrying out external glazing cleaning and general maintenance. The concrete design of the building resulted in a thin roof construction, so The Gallery needed to ensure that any systems installed were fit-for-purpose, fully tested and compatible. With such a prestigious and architecturally prominent building, it was imperative that the chosen system also suited the design of the building.

The Roads & Maritime Services now benefit from a highly progressive workspace in their refurbished HQ on Parramatta Street. SAS800 Trucell ceilings were installed in the open plan lounges and stairwells of the renovation. The system gives a decorative feature to the fit-out with the illusion of a much larger space for activity-based working. Comfortable lounge furniture and bright colours have also been chosen to encourage communication and create a flexible working space.

The project objective was to create a dynamic space for a large range of use by the members. An example of this is the boardrooms, which had to be designed to create a space that could cater for 4 simultaneous separate meetings or the flexibility to cater for 2 x 50 seater conferences as well as a 90 seater conference style space. Folding acoustic walls and organic puzzle-piece boardroom tables that fit together to create near endless configurations to solve this.

Developing a successful space that was cohesive in its design for two strong brand identities meant proactive attention to the challenges of occupants’ needs, combined with a strong creative narrative. The overall concept for this office fit-out was ‘bringing the outside, inside’.Vtec were thrilled to be specified as part of this healthy workplace plan for the Grade A design.Learn more about how the SupaSlat ceiling evokes biophilic attention to promote openness and welcome.

Funky Blocks Thomas Street ManchesterStreet Furniture | VAD | Counter Terror BlocksLocation: ManchesterTownscapes CT blocks have been given a cool ‘funky’ makeover in Manchester.The Thomas Street Manchester scheme used a local street artist to design and implement the designs.Part of the wider safe routes for cycling scheme the blocks provide additional security whilst fully fitting in with the Thomas Street vibe.

An 8m long Twinfix canopy installed on the front of the Lower Willingdon Pre-School Nursery in Eastbourne is proving a great success. With a 2.8m projection from the building and fitted with vertical glazing at both ends, Julie Langford, Nursery Manager, says it has made a tremendous difference to the nursery, with the extra space also being well used by the Breakfast and After School Clubs, as well as by parents dropping off and collecting their children.

David Bailey Furniture Systems (DBFS), a leading manufacturer of specialist healthcare fitted furniture, has been chosen to supply a wide range of new systems, as part of a major redevelopment at the Stroke Unit at Maidstone Hospital, managed by the Maidstone and Tunbridge Wells NHS Trust.The project, currently in Phase Two, aims to expand the unit's bed capacity and enhance its capabilities to deliver exceptional care to the community. DBFS is providing high-quality specialist fitted furniture, including thick bullnose fully moulded worktops, ABS lipped worktops, white adjustable spur shelving systems, together with various base, wall and drawer line units. DBFS is also transforming multiple spaces within the project, including the Ward Pantry, ASU Bed Bays, Reception and Office, Utility Cupboard, Equipment Store, Sister's Office, Consultants Office, and supplying & installing bespoke Staff Bases and Nurse Stations. These bespoke elements reflect DBFS's ability to adapt to the specific needs of each space, ensuring a seamless integration with the overall design and functionality of the unit."We are delighted to be a part of this important project and to play a role in enhancing the Stroke Unit at Maidstone Hospital," said Tony Huggins, Managing Director, David Bailey Furniture. "Our team is committed to providing high-quality fitted furniture that will create a healing environment for patients and staff alike."Once the refurbishment is complete, the new stroke unit at Maidstone Hospital, part of Maidstone and Tunbridge Wells NHS Trust will be significantly enhanced as a major facility for the local community. Patients will benefit from a carefully-designed unit that puts their needs first, providing a sturdy, hygienic, and attractive environment conducive to optimal recovery. Tim Fletcher, Estates Capital Project Officer at Maidstone and Tunbridge Wells NHS Trust, said: “We have used DBFS for a number of years, either by direct award contracts or through third party contractors. The products they have supplied for our Stroke Unit refurbishment project are strong and robust, so are suited to a healthcare environment. Importantly, they also comply with current Health Technical Memorandums. We will continue to consider using DBFS products for future projects at the Trust.” DBFS's involvement began in November 2023 with the supply and installation of their extensive range of healthcare fitted furniture. Their team, working in collaboration with WW Martin Limited, has meticulously planned and executed the installation process. A testament to DBFS's adaptability was the creation of a central corridor through the site, enabling patients and staff to continue moving freely throughout the hospital during the refurbishment. This has minimised disruption helping staff to prioritise patient care."By working hand-in-hand with DBFS, we were able to seamlessly integrate the new furniture into the existing building," said Paul Ruddock, Special Projects Contracts Manager for WW Martin Limited. "Adapting to ever-changing needs is the cornerstone of healthcare facility design. The creation of the central corridor, in particular, exemplified the innovative spirit that allowed us to prioritise patient well-being even during a major refurbishment such as this." Architects for the project, Hazle McCormack Young (HMY), envisioned a modern, efficient space that would foster a healing environment. DBFS has responded to this challenge with its wide range of high-quality specialist fitted furniture.For David Bailey Furniture, its involvement in this project further underscores the company’s commitment to enhancing patient care and improving healthcare facilities wherever its products are specified and installed. For further information visit: www.davidbaileyfurniture.co.uk