"wall light"

Tobermore’s Historic Flags were used to create a timeless look at Cutters Wharf, a chic riverside complex in Belfast which has been referred to as ‘Northern Ireland’s favourite outdoor venue’.

The Castle Basin area of Enniskillen in Northern Ireland was transformed with a £1.7 million investment, funded by the Department for Social Development and Fermanagh and Omagh District Council. Tobermore’s Fusion block paving and Mayfair Flags were used to create a contemporary look for the tranquil walking route.

A hard landscaping product with a natural appearance was needed for the historic Airfield Estate in Dublin and the aged, antique aesthetics of Tobermore’s Tegula was the ideal choice for the 1,400 sq. m. paved area on site.

Situated on the southern banks of the River Liffey overlooking Phoenix Park, Clancy Quay is a luxurious new housing development in Islandbridge, Dublin, from Kennedy Wilson Europe. Irish landscape architecture firm, Mitchell & Associates, was assigned the task of designing the external landscape surrounding the 46 designer apartments and townhouses on site which have replaced the historic Clancy Barracks. With the landscape consisting of vast, spacious gardens and courtyards, the design process was challenging, however, Tobermore helped make the job much easier for Mitchell & Associates with the provision of high quality hard landscaping products.

Wood Goldstraw Yorath was faced with a large undertaking when designing the new Bet365 Office Headquarters in Staffordshire. But Tobermore was on hand to help make the job easier with the supply of hard landscaping products suitable for the contemporary new building.The new 13,000 sq. m. base was built on the site of the former Sentinel Newspapers office in Media Way in Stoke-on-Trent and is nearly double the size of the Bet365’s previous headquarters at Festival Park in the area.

The Challenge Modern paving was required for community-based retail developmentSuperValu invested €12m in a 15,200 square foot store in Dunboyne, Co Meath. The location of the retail development has great significance to the local community, having previously served as the local GAA grounds.  Extending its current product offering, the new scheme also aims to become a local community hub. The design champions a community ethos with the inclusion of a large open outdoor space. The open plan space offers flexibility for market stalls or event structures. The new development has incorporated four adjacent units, office accommodation and a café. The new state-of-the-art retail hub required high quality paving that would complement the grey brick and granite cladding of the building. The main entrance and pedestrian walkways needed to fulfil the hard landscape design aspirations.  The Solution Tobermore’s Fusion and Manhattan perfectly complement the retail hub  Tobermore presented hard landscaping options to complement the new state-of-the-art retail development. Fusion and Manhattan block paving were the perfect choice to blend with the grey brick and granite cladding building.  Laid in alternating bands, the striking granite aggregate finish of the paving responds to the staggered elevations of the building. Linear paver Manhattan was used for areas of the main walkways in mixed sizes with smaller units of Fusion laid either side. The three-colour mix of grey tones in a stretcher bond laying pattern adds character and visual appeal to the central plaza.  The grey tones do not follow a particular sequence and the linear bands do not adhere to fixed widths. The intention was to achieve a certain randomness that feels natural and softens contrast. The range of unit sizes and colours of Fusion and Manhattan helped create this vision.  Tobermore’s Fusion kerb added the finishing touch to the project with its striking granite aesthetic as a border surrounding the soft landscaping in the central plaza.   

The Old Brewery in Salisbury, which was historically known as ‘Milford Street Brewery’ has been restored.  The new residential development includes a selection of contemporary homes and retail units. The overall aim was to revive The Old Brewery, whilst maintaining respect for the listed and historical buildings which dated back to the 15th century.  The area includes a number of pedestrian walkways and parking bays for residents. Tobermore worked closely with the project architects, providing complimentary design visualisations for the scheme. The free design service was well received and assisted with the final product selection.   Tobermore’s vintage themed Tegula block paving in Charcoal was chosen as the primary hard landscaping material. The product’s antique appearance helped to maintain the historic nature of the location, offering an aged yet traditional style finish. Due to its durability, Tegula was suitable for both the walkways and parking bays. 

A visually appealing yet functional hard landscaping solution was required at Ballymakenny College in Drogheda. Tobermore supplied Tegula for the pedestrian area on site and Hydropave Tegula Duo for the trafficked areas where a SuDS system was required.

Building Design Group Ltd specified a full hard landscaping solution from Tobermore for the expansive pedestrian and car park areas at Castlegate Park in Dudley which features a variety of popular restaurant and cafe chains.

Barronsfield Grange

WDR & RT Taggart was already familiar with Tobermore products from previous schemes and the architect had no doubt about specifying Tobermore again as the product aesthetics and costs met the project requirements for this refurbishment project at the Abbey Centre in Newtownabbey.

This is one of many Persimmon Homes projects in Scotland that Tobermore’s smooth, vibrant Kingston facing brick has been specified for. The aesthetics, technical performance and cost of the product met the developer’s requirements perfectly.

When Regenda Homes was seeking a building solution for the homes at Carr Lane in Hambleton, Tobermore provided the perfect solution in the form of Kingston facing brick – the smooth, vibrant appearance of this product created the beautiful, elegant finish desired.

CALA Homes Sold on Tobermore Complementary Facing Brick & Paving SolutionCALA Homes developed Kinleith Mill, a beautiful and distinctive new housing development in Currie to the west of Edinburgh, and in keeping with the housebuilders high quality standards, the team wanted to ensure that the most appropriate building and hard landscaping materials were sourced for the site. CALA Homes has been developing aspirational and award-winning homes across the UK for over 30 years, earning the company an excellent reputation. Tobermore’s Scottish Sales team introduced the housebuilder to the superior facing brick and paving products produced at Tobermore which surpassed expectation. Tobermore’s timeless Lansdowne facing brick was selected for incorporation on the properties at Kinleith Mill and vibrant Pedesta block paving was specified as a complementary hard landscaping solution.Alan Cole, Commercial Manager at CALA Homes, explained Yeoman McAllister Architects design concept for the project: “The design was inspired by the sites history and the idyllic location next to the Water of Leith in Currie.“The development offers a unique collection of four and five bedroom detached homes, three and four bedroom semi-detached houses, three bedroom waterside terraced properties and a select group of apartments, all new to the CALA portfolio.”The exteriors of the Kinleith Mill homes were designed with a combination finish of facing brick and dash. Alan explained that their choice of facing brick was made very easy when they were presented with Tobermore’s Lansdowne product. Lansdowne undergoes a tumbling manufacturing process that produces a charming weathered look and is ideal for applications that require a warm, elegant finish.Alan commented:“The aged aesthetic created a rustic look and we thought it was the perfect choice for the style and character desired at Kinleith Mill. While the inside of the properties were designed with modern interiors and amenities, we wanted to bring a touch of tradition to the exterior.Alan Cole, Commercial Manager at CALA Homes“In addition, we examined existing projects that Tobermore’s Lansdowne facing brick was used on and it was clear to see that the product performed well over time and showed no fading or discolouration.” Tobermore’s Lansdowne offers excellent colour retention capabilities due to the fact that the best iron oxide pigments available are sourced to produce the vibrant colours available within the range to ensure that colour is retained throughout the lifetime of a product.As well as the buildings, Lansdowne was incorporated on the bridge which connects the homes to the tranquil countryside surrounding the development. This created continuity across the aesthetics on site.The landscaping was an important element on site as the exterior of a property is crucial when appealing to new home buyers. Alan noted: “Paving was an obvious choice for the hard landscaping requirement as we knew it would enhance the appearance of the site more so than alternatives such as tarmac. Paving also offered benefits in that it is hard-wearing and should any blocks ever need replaced in the future, it is relatively easy and inexpensive to do so.”CALA Homes selected Tobermore’s Pedesta block paving as an attractive and versatile hard landscaping material. Pedesta is manufactured with a stunning, smooth finish and a rectangular profile that allows the creation of distinctive laying patterns. Alan noted:“Pedesta was the ideal paving product as it offered a beautiful yet simplistic finish that complemented the brick façade of the properties.”Alan Cole, Commercial Manager at CALA HomesThe properties at Kinleith Mill were highly sought after, ranging in price from £450,000- £670,000.Alan reflected on the project: “We couldn’t have hoped for a better result. Kinleith Mill is another development which we are incredibly proud of.“The products and the assistance provided by Tobermore was first class and we would have no hesitation working with the manufacturer again on future projects.”

Linework Architects imaginative use of architectural glass rooflights was key to transforming this period north London property. Lineworks director, Robert Haworth collaborated with Glazing Vision with the objective of delivering natural daylight and a touch of glamour to some tricky spaces whilst maintaining privacy where needed.The design brief for the project called for an ultra-minimalist final finish, so it was important that all of the glazing featured minimal framework and a clean integration with the building fabric itself.Glazing Visions philosophy of minimum framework, maximum daylight was the preferred solution and met all of the design requirements, providing enough flexibility to tackle the various challenges that the scheme presented. The property comprises of three stories with a mixture of extensions added to increase usable living space, the problem with this is that some of these areas can be starved of natural daylight, making them gloomy and uninviting, in order to combat this, several types of rooflight needed to be specified to tackle each of the areas.Beginning on the ground floor, a wrap around extension has been created featuring a modern and contemporary kitchen dining area leading on to the garden. A large set of sliding glass doors provides natural daylight and access to the outdoor space, but their effectiveness at delivering enough daylight is limited as you go deeper into the building where it would begin to feel darker and more claustrophobic.To address this, a Glazing Vision modular rooflight system measuring over six metres in length runs along the entire length of the extension, this unit is fixed structurally to the original wall of the building creating the feeling of a ‘glass roof’ when transitioning from the original building to the new. Manufacturing the unit in three sections allowed it to be successfully maneuvered on site without the use for an expensive crane and the structural silicone joints between the sections maintained the frameless appearance needed to compliment the minimalist interior.“All three rooflights were quite tricky to install because the property was a terraced house and there was no ability to use a crane. Somehow the team got them in!” Robert Haworth, Director, Linework Architects.The creation of a second storey extension was essential to provide a large family bathroom space, but this meant that the stairwell leading to it was another area potentially starved of natural daylight. Installing a rooflight overhead was a logical solution, but this was complicated by the position of the stairwell being located beneath two opposing pitched roofs. An off the shelf solution would not be acceptable as any rooflight installed above would need to be designed to accommodate this tricky detail.As rooflight specialists, Glazing Vision were able to design and manufacture a custom shaped fixed Flushglaze unit specifically for this part of the building.Therefore maximising the amount of overhead glazing and thus lighting the stairwell sufficiently so that it can be used safely without the need for artificial lighting. Perhaps one of the most quirky and inventive parts of this renovation is the use of glazing in the bathroom, the client had specified a large walk-in shower area which was easily achievable given the space available but would have resulted in the shower being located in a dark corner of the room necessitating the use of artificial lighting. Natural daylight is critical when attempting to achieve a minimalist scheme, so Linework Architects wanted to ensure that this element was carried through to all corners of the building.“We were trying to make a really exceptional bathroom space, so we decided to use the Eaves Rooflight, and play with the glass transparencies.” Robert Haworth, Director, Linework Architects.The resulting installation delivers a floor to ceiling vertical glass window section which transitions into the roof seamlessly with no additional framework, this creative solution provides a unique design element to the bathroom and the much-needed daylight to open up the space. Being a bathroom, privacy also had to be addressed, particularly in the shower area! Glazing Vision recommended the use of opaque satin etched glass which provides enough translucency to allow light to permeate, but also presents a frosted glass finish sparing the blushes of anyone using the shower.Taking around five months to complete, this was not a straightforward scheme to deliver, however the end result can be considered transformative. Linework Architects uncompromising and inventive use of glass rooflights has proved incredibly successful in this project and contributed greatly to the feeling of light, air, and space in this minimalist haven.

BackgroundLocated in the Ancoats area of Manchester, the Albion Works strip and re-fit project was funded by the Building Safety Fund, a Government Fund to remove unsafe non-ACM cladding on residential and mixed-use properties that are 18 metres and over and do not meet building safety regulations.K Systems Approved Installer QFF Façades were contracted to complete the exterior wall insulation and rendering of the 8-storey residential building.The original 60mm EPS system was stripped from the building and replaced with a safe, thermally efficient façade solution, which upgraded the fire performance of the cladding, ensuring the safety of both the building and residents.Our ServiceK Systems provided support throughout the application process for this Building Safety Fund project. The Technical team offered on-site technical and installation support throughout the build process and supported QFF to ensure quality and reliability.We produced a bespoke specification and worked closely with Thomason Consulting and QFF Façades to agree and deliver specifics such as fire stopping and abutment details.From design advice through to installation, we offered a partnership approach which aided a smooth installation process with minimal disruption.Technical Project DetailsThe original sheathing boards were replaced, and the K Systems Exicco M drained cavity façade system was installed. This high performing drained cavity system was specified as a requirement for this steel frame residential building. 60mm mineral wool insulation was specified to retain the line of the existing façade.Fire safety with high rise buildings like Albion Works is of utmost importance and this solution generates high levels of fire resistance and non-combustibility (A2, s1-d0 rating), meaning the latest building regulations were complied with. Additionally, the thermal performance of the building improved with a U-value of 0.28 W/m²K being achieved. Residents will therefore enjoy reduced heating costs and better living conditions.For the finish, silicone thin coat render ensured that aesthetically Albion Works had a clean, crisp attractive appearance. This durable, low maintenance render transformed the outside of the building and will ensure a longlasting finish to the property.

BackgroundLocated in a prominent location on the Morecambe seafront, the Broadway Apartments project was large new build steel frame apartment block.A challenging project to be involved with, as M H Stainton Homes wanted to create an iconic building on a corner location. The steel frame was key, combined with curved glazing on the corner elevation of the building. Then a lightweight cladding solution was required for the rest of the façades.K Systems approved installer M & M Façades were contracted to complete the exterior wall insulation and rendering of the 8-storey residential building.Our ServiceWe worked in close partnership with M & M Façades throughout the duration of the project. The K Systems Technical team offered on-site technical and installation support throughout the build process and supported the M & M Façades team at all stages of the project.As the building is over 18 metres, a bespoke specification was produced to ensure compliance with the current building safety regulations.A direct fix system suitable for steel frame structures and all building heights was specified, ensuring the safety of both the building and future residents.Technical Project DetailsAfter numerous design meetings the K Systems Direct Fix M (Mineral Wool) EWI system with a Silicone Render (TC 15) finish was chosen, meeting the requirements of M H Stainton Homes.This system provides high levels of fire resistance and non-combustibility bringing the apartments in line with mandatory Government requirements for buildings over 18 metres tall.We specified the use of multiple thicknesses of insulation boards (50mm, 100mm and 170mm) to allow for the line and level of the steel frame. A U-value of 0.28 W/m²K was achieved, meaning the residents will enjoy thermally efficient homes.For the finish Silicone TC 15, our high-performance thin coat render, was used. With the coastal location, this durable, weather resistant finish offers an eye catching, clean design, creating a modern and crisp aesthetic. Its hydrophobic properties provide a low-maintenance finish.We delivered a safe, thermally efficient, eye-catching design with a long-lasting finish that residents will appreciate for years to come.

Comprehensive training facilities that show the most innovative technologies for fire safety, particularly safe evacuation.

Fitzwarren Court is of one the highest buildings in Salford at 23 storeys and was a major refurbishment requiring an aesthetic and thermal upgrade. The building had originally been earmarked for demolition as part of a wider regeneration of the area, but plans were halted when Salix Homes secured funding to modernise the block.The Casey Group were appointed as main contractor for the work. New kitchens, bathrooms, doors and windows have been fitted to all 135 apartments. Our approved installer Hamilton Building Contractors were contracted by The Casey Group to complete the exterior wall insulation and rendering which had a metamorphic effect on the building’s overall appearance and thermal performance.The 1970s building was a pre-cast concrete panel system. The panels were of a ribbed surface design and were fitted together creating a recessed detail which was a unique design feature. Alongside Hamilton, we worked to transform the façade aesthetically creating a modern building, with a safe, stylish and thermally efficient solution. A complete revamp which has given the building a new lease of life and delivered safe, modern and energy efficient homes for the residents.We worked in collaboration with Hamilton Building Contractors to ensure there was minimum disruption to the residents of Fitzwarren Court, who remained in their homes while the work was carried out.K Systems produced a bespoke high-rise specification which included various zonal wind load calculations optimising the longer-term safety and durability of the design. Various factors were taken into consideration throughout the installation process including a recessed windowsill and anti-perch detail (preventing birds from settling on the sills).Our focus throughout the project included safety, quality, thermal efficiency and service.Paul Turner, Director at The Casey Group, said:   “Successful EWI schemes, especially on high-rise tower blocks, demand the highest level of Project and On-Site Support from design through to inspections, with technical guidance and warranty support. K Systems are expert partners in this field.”Discover more on how the Fitzwarren Court transformation project won at the 2021 INCA awards here: https://k.systems/news/kilwaughter-minerals-wins-big-at-prestigious-national-industry-awards/

Celebrating 50 years trading this year, as part of their celebrations and charitable activities, Harrison Thompson were pleased to offer their services to their local hospice.The Sue Ryder Wheatfields at Headingley Leeds is a charity run 18-bed hospice, offering the very highest care and services to patients with life-limiting conditions and their families, free of charge.“For our 50th anniversary, we wanted to focus our charity efforts on local organisations.” Explained Harrison Thompson Director, Graeme Brumwell.“Serious illness has touched a number of lives within the company and Wheatfields Hospice has been a facility close to our hearts helping families on these difficult occasions.“It seemed only fitting that we should offer something back for the care that Wheatfield has provided over the years.” Concluded Graeme.Yeoman Shield – the wall and door protection division of Harrison Thompson – got in contact with the Hospice to offer free material and installation for wall and door protection products to be fitted in an area of their choice which was gratefully accepted.2.0mm thick wall protection panels in Cream were fitted to the bedroom walls at the head of beds protecting from marking and damage which can occur from the movement of both the bed and medical equipment.In the corridors, Yeoman Shield’s Fire Rated Door Edge Protectors were fitted to the meeting edge of doors helping to protect from damage and helping to prolong the life of expensive to replace fire doors.The installation of Yeoman Shield will help Wheatfields to keep looking smart and inviting for all those who use the facilities whilst importantly helping to reduce their repair and redecoration cost over the years to come.Sue Waddington, Service Improvement Matron commented “I cannot commend high enough the service that we have received from Yeoman Shield’s contract department.“Due to the nature of our provision of specialist care and services, we had to call on Yeoman Shield at short notice to carry out the work when rooms were available. The installation was undertaken with great empathy and regard for the surroundings.“Now completed the Wall & Door protection looks great and dovetails into our existing décor lovely and gets the hospice well on the way to our forthcoming refurbishment plans for the inpatient unit” Concluded Sue.

Background Opened in 1955, Stinchcombe Village Hall has been at the heart of the community in the Gloucestershire village for decades, and it continues to thrive thanks to the dedication of a group of local residents and regular users. An active programme ensures the hall is regularly used for a whole host of activities, classes, clubs, and events for residents, maintaining its original mission to provide a facility that supports physical and mental wellbeing, training and recreation.The committee works hard to ensure the village hall’s facilities are maintained to a high standard. The hall features dimmable lighting, a stage with seating area, kitchen; and toilets accessible to disabled users, plus another meeting room known as the ‘Committee Room.Over the years Stinchcombe Village Hall has benefited from various upgrading projects, including in recent times improved heating and energy efficient lighting throughout. However, the committee are constantly looking at how they can improve things further, including acoustics.ProblemCharlie Oakhill, Chairman of Stinchcombe Village Hall, approached acoustic specialists Sound Reduction Systems (SRS) to explore the potential for reducing excessive reverberation within the hall during use. The committee had taken the initiative prior to contacting SRS by completing and submitting SRS’s online 3 Step Estimator Form.They wanted to take action to make the hall more acoustically comfortable during regular activities. Users often found it difficult to hear speech and music easily because of the high levels of ambient noise that developed, particularly during performances and busy activities.SolutionUpon receiving key information about Stinchcombe Village Hall, including the dimensions, surface finishes and photographs of the ceiling and walls, SRS were able to input this data into their Sonata acoustic modelling software. This was able to evaluate the existing acoustic performance of the room and specify exactly how much Sonata Class A sound absorption would be required to solve the issue.The Stinchcombe Village Hall committee were then presented with a report detailing predicted before and after performance and a budget estimate for the treatment. Once this had been approved, the next step was for an SRS technical advisor to visit the hall and carry out a dimensional survey to confirm the specification and quote.SRS Sonata Aurio absorbers are a practical and cost effective way to control reverberation inside buildings like this village hall where there are a lot of hard surfaces. The panels comprise a technical, non-shedding, acoustic foam with an acoustically transparent fabric finish to the face and sides. They are easy and quick to install and can be directly bonded to walls and ceilings, and because they are robust, they are perfect for gyms, sports halls or anywhere where ball strikes may occur.Results The site survey was carried out by SRS Director, Alex Docherty. He said:“The presence of hard, acoustically reflective surfaces and lack of soft furnishings was creating a high level of reverberation and echo. This was creating an environment that wasn’t ideal for many activities undertaken within the hall and making speech intelligibility particularly poor. Once the details of the hall had been entered into the SRS computer prediction programme, it showed an estimated mid-frequency reverberation time (Tmf) of 3.73s – way higher than the recommended value of <1.5s for a room of this usage.”After the quotation was approved by the committee, approximately 52m2 of class A Sonata Aurio acoustic panels were installed to the walls and ceiling within the hall, with fantastic results.Client feedbackFollowing completion of the installation, Charlie Oakhill, Chairman of Stinchcombe Village Hall commented:“Thank you for completing the acoustics promptly and a very tidy job. The panels have made a tremendous difference in our hall and I am sure we will get a lot of positive feedback from our users.“Jed the installer did a great job and left everything neat and tidy, he is a credit to SRS. Thanks again and finally we are happy to speak to any potential customers and also happy if they want to come and have a look and a listen.”Products used·       Sonata Aurio panels

Yeoman Shield recently supplied and installed a handrail system in an NHS Trust’s seven mental health accommodation units.With a requirement for a handrail that was also sensitive to the nature of service users, an Anti-Ligature Guardian Handrail was chosen from the Yeoman Shield range to be fitted to corridor and passage way walls, offering both support as a handrail for those who may require it as well as a form of protection from impact damage to walls from footfall and wheeled equipment.Using a continuous fixing bracket running the full length of the handrail installation eliminates points where ligatures can be attached. Close fitting wall return ends ensures complete enclosure of all mechanical parts of the rail.Supplied in Red, the contrasting colour not only adds to the interior décor but can assist in wayfinding. Manufactured from a rigid PVCu material Yeoman Shield’s Guardian Handrail products do not promote the growth of mould or viruses and are easy to clean, being impervious to commercial cleaners.

Investment in the infrastructure at Festival Place shopping centre in Basingstoke has included the refurbishment and extension of the 3,000 space car park. Lang+Fulton worked with Bell Associates to design a new façade using their STEREO-KINETIC® Wall cladding. The gradation of the stainless steel tiles was designed to allow for ventilation whilst transforming the appearance of the original car park and linking it to the new extension with one seamless frontage. The panels were mounted on to an independent steel frame which was bolted back to new structural steelwork.

Jessica's home renovation and extension. Please see below a brief overview of Jessica's renovation journey in a blogpost:I’m not going to lie, renovating in a pandemic with no kitchen, was extremely stressful at times, particularly during the long stretches we were home-schooling, and it’s not something I’d want to repeat, but it definitely could have been worse, and we survived it.We bought this house six years ago and I have wanted to do the kitchen side return extension ever since Day One, but we had to wait and save, and then finally in September last year (2020) the day finally came, and we started the renovation. For reference, this is what it looked like when we bought the house. We did do a budget makeover in the interim by painting the cabinets and replacing the handles, but by the time we came to do the major building work we had doors hanging off, shelves collapsing, and the major lack of storage meant things were stuffed in and precariously balanced on top of each other and ready to topple as soon as anyone dared to delve in. I shared lots of my inspiration and ideas for the new kitchen before we started. I knew from very early on that I didn’t want to spend a huge amount of our budget on creating a fancy architectural kitchen extension. For me, the space inside was what was most important, and I just wanted to make sure we were maximising that to its full potential. We hired architect to draw up just the plans for us. I had initially wanted a pitched glass roof to run the length of the side return extension, but council planning regs and the unusual way our house is laid out, put paid to that idea. Our local council had recently introduced a height restriction of 2.5m at the boundary when extending more than 3m at the rear. Which we weren’t. Or so we thought! What we hadn’t realised is that the existing kitchen had already been extended and that counted towards the allowance, so the restriction did apply. This caused a lot of stress at the time, as we were so worried that the ceilings were going to feel low and dark. The good news is that as soon as the Vario by VELUX rooflights went in, all our worries melted away, and it’s not something I even notice or think about now.Another thing we did was speak to our neighbours about a third-party wall agreement. This was pretty key for us, as the buttress was on our side of the wall and if we had to build around it we would have lost at least half a metre of the side return. What we needed to do was take it down and build up right up to the boundary (saving as many of the London stock bricks as we could in the process). Luckily our lovely neighbours agreed, as this really did make a huge difference to the internal space.The LayoutI have had a lot of questions about many different aspects of the kitchen, but I think the thing I have been asked about most is the dimensions and the layout. We extended out 1.5m at the rear and around 2.5/3m to the side, bringing us to a total of 5m wide x 8m long. I think our layout is fairly unusual for a kitchen, and it seems to have inspired lots of people to try and do the same in their own kitchen renovations. The good thing about waiting almost six years to renovate your kitchen is that you get plenty of time to mull over what your dream kitchen might look like. The Design  knew I wanted to go with a seamless sleek, understated design and let the other materials do the talking, so I settled on the Urban kitchen, with slab doors. I worked with a kitchen designer to fine tune the space, and that’s where it really comes into its own, because they think of all the details you wouldn’t necessarily think of, and they know exactly how much space you need to allow you to move around your kitchen comfortably. The area around the island and peninsula was a tricky one to get right, because we didn’t want to interrupt the flow too much, but having lived in it for the last few months, I can confirm the kitchen designer got it spot on. We also included a fluted glass cocktail cabinet in our kitchen design, which houses all our glasses and drinks bottles and sits on the dining/entertaining side of the kitchen.The Vario by VELUX rooflightsOur previous kitchen had very little natural light and as a result none of us ever wanted to spend any time in there. So getting as much natural light as possible was a major priority in this renovation. We planned for two large rectangular rooflights along the side return (as we knew we needed a steel in between) and a square one towards the rear. Once we got planning permission, I asked our architect to tell me the absolute maximum amount of glazing we were allowed, and then headed straight for the Vario by VELUX website to design bespoke rooflights to the exact size we needed, using every last bit of glazing we were allowed! The bespoke nature of Vario by VELUX means you can tailor your sizes exactly to your needs. Using the 3D configurator online, you can also choose the frame colour, the type of glazing, and whether you want them to open or not. We have two 2.3m x 1m Rectangular rooflights (one opens) and a 1m x 1m square rooflight. Our builders had never worked with them before and were really impressed by the ease of fitting. The moment they went in, was the moment we really start to get excited about the new space. Even with screed floors and bare brick walls in November, the light was incredible in there. Now it’s finished, one of my favourite things is to work in the kitchen and watch the light as it changes and moves throughout the day. Even watching the rain is epic.

Technical Manager Tim Spencer “The initial need was for an elegant high-performance ceiling grid that could span 2500mm and support the ceiling infill. The answer was a bespoke version of our Rockfon® System MaxiSpan™ grid. We were then briefed to find an acoustic solution to resolve the acoustic challenges for the spaces which would host a variety of music concerts. We worked in partnership with ROCKWOOL and the solution was bespoke 100mm thick Rockfon Color-all® black ceiling tiles in combination with 100mm ROCKWOOL FLEXI® overlay and 40mm thick Color-all panels together with 100mm or 160mm FLEXI for the walls.”

This new shared campus for two North Lanarkshire primary schools has been designed by leading architects Halliday Fraser Munro to reflect the individual identities of the two schools whilst uniting them in one single building.The layout of the new school building reflects the dual-nature of the campus, with two separate two-storey teaching wings set around a central courtyard. This open space and the surrounding linked buildings provide shared facilities including a gymnasium and dining hall. Constructed by main contractor and established supply chain partner, Morgan Sindall, the new modern school building benefits from several aluminium fenestration solutions from across Senior’s extensive range.The eye-catching main façade features Senior’s thermally-enhanced SF52 aluminium curtain wall system with integrated SPW501 aluminium commercial doors which provide safe and secure access. Throughout the building, Senior’s patented low U-value PURe® aluminium casement windows have been specified to help reduce heat loss and boost the overall energy-efficiency of the scheme. Senior’s fenestration systems were fabricated and installed by specialist contractor Linn-Tech.

Sherborne School is an independent, HMC boarding and day school for young men aged 13-18. Steeped in history, the buildings date back to the 12th century, having educated many boys over the centuries. A £9m extension to the existing sports centre has doubled the size of the buildings, including new facilities such as:Squash courtsPerformance gym studiosFull length indoor cricket nets2nd large sports hallGolf simulator roomClimbing and bouldering wallsClassrooms and changing facilitiesThe state-of-the-art centre has transformed the sports training capabilities of the school and the students it develops, giving more opportunity for the boys to explore and train for different activities. ChallengeTAC Projects were appointed as the specialist cladding contractor for the exterior cladding on the new Sherborne School sports centre and Link Building - opting to use a timber cladding rainscreen system for a stunning natural wood effect. Composed of Siberian Larch Timber planks (sourced through Vincent Timber), and on top of a 120mm composite TATA Trisomet carrier panel; the timber is grade A and includes applied fire treatment to Euroclass B fire rating. Solution Fixing back the panel to the substructure was a job for Fixfast's MatchFast composite panel fixings - with moulded UV resistant colour heads, these fasteners are available for timber, light, or heavy steel - with washers for both roof and wall applications. Also used within the construction were Fixfast's DrillFast ultra heavy self-drillers for 25mm steel; DrillFast low profile fasteners lacquered to the specific colour required to blend in with the building, and accessories to suit - suit as silicone and strip sealants for sealing and weatherproofing joints. (image courtesy of TAC Projects)"TAC Projects pride themselves on being able to provide innovative solutions to almost any roofing and external façade project, and Sherborne School was no exception. Our client, Amiri Construction, were asked to endeavour to meet Sherborne School's budget constraints, which partly entailed a redesign of the external façade build-up, but still provide the original design intent. The complete façade construction was literally turned 90 degrees, so a completely new support and fixing system had to be designed. We were engaged early by Amiri to achieve this - which we succeeded in doing - but only with the help of our key supply chain, which included Fixfast. We have a fantastic working relationship with Fixfast going back a number of years, and they certainly didn't let us down on this occasion. They proved an integral part of the technical jigsaw that was required to reinvent the façade build-up from inner wall to outer timber rainscreen façade. Fixfast are always dependable, have a great range of products, and are always willing to come to the table to discuss and provide solutions where they are able. We would certainly recommend them to others."Paul Mann - Sales & Pre-Construction Manager at TAC Projects

Fire Retardant aluminium cladding that looks like real timber. This system of real timber that wraps aluminium cladding has been around for 30 years; its not a new phenomenon, in some practices, it’s the norm.Exceptional Architecture with contrasting aluminium wood cladding against a striking white stucco facade. Incredible detailing and accurate installation has made this private residence an iconic statement. Real timber veneer over aluminium results in a contemporary timber cladding, its not an effect, its not plastic… its timber.Aluminium cladding that looks like real timber.Set over three floors and a basement, beautiful landscaped surrounds and many balcony terraces make this dwelling the envy of other property owners. The cladding by Technowood ® has been used to good effect for the wall cladding, soffit board arrangement and also the fascias. This system has many options for start and stop beads with alternatives for reveals and corner detail. The design of these projects is only limited by the designer.Pergola design and Brise Soleilby Technowood®As Technowood have been manufacturing since the 1980’s they are well versed in many different profiles and systems in aluminium covered in real wood. Pergolas that span with a clear run up to 12.5 metres, louvres and Brise Soleil that match. We can create a complete system in timber that looks the same, made at the same time by the same hands… the design can also incorporate powder coated or anodized aluminium elements; supplied at the same time. These are also made in the same manufacturing process.Cladding illumination Up lighting, down lighting or washing warm white illumination across the facade of cladding looks beautiful. Further, this offers a welcome from the building during the darker hours, makes your home more inviting, it also looks stylish. It’s a simple effect to achieve and doesn’t cost a lot in comparison to other illuminated elements of the project.Technowood aluminium timber claddingThe simple system is an inclusive platform of cladding. It starts with a simple L shape bracket, a long length of supporting section T shape (like a timber batten); the cladding directly fixes to it. Think rain screen, when you are designing and you won’t go far wrong. Technowood has been here for 30 years and it’s here to stay. Certified FR A2, FSC and certified for Environmental Product Declaration, its also warranted for 20 years.

The refurbishment of the car park was one of the first steps in the regeneration of New Covent Garden Market; a project which is projected to take 10 years at a cost of £2 billion.Appropriately for a flower and fruit market, BDP designed a green wall facade. Lang+Fulton’s Stereo-3 panels were chosen to clad three elevations of the 7-storey car park, sections of which will become covered in ivy.The design incorporated an aluminium box section framework and feature panels as well as open spaces to create added interest. In total Lang+Fulton supplied 422 grating panels in various sizes up to 2510mm high to cover an area of 1296m2. The grating panels were framed at the top and bottom with bent over lugs for fixing to the aluminium uprights. 

Bioethanol fires require no chimney or flue, give off no harmful emissions and are 95% energy efficient. They are available in a large selection of designs for living rooms, kitchens, bedrooms, bathrooms and gardens. A good example is the home of Bury resident Anthony Norman, who chose an Italian kitchen and a British made bedroom from local dealer Icon, both featuring table-top bioethanol fires. Anthony and his family were convinced that they would make exciting additions to their new kitchen and master bedroom. Ebios bioethanol fires are made in Germany and distributed by DRU in the UK.

The hotel is full of rooms flooded with light and exceptional design ideas from the interior architects of JOI-Design.The hotel has its own beach on the Baltic Sea and 124 rooms with a view of nature. It is the blend of wonderful design, cosy comfort and leisurely simplicity in particular which makes the furnishings so special. Strong colours and maritime details in the rooms are contrasted with soft tones in the bathrooms. At ARBOREA they believe in sustainability and quality – just as KEUCO does with bathroom furnishings. KEUCO fittings, accessories, and cosmetic mirrors accentuate the high quality bathroom design. Here, the focus is on guest comfort: KEUCO’s IXMO_solo fittings in the shower combine single-lever mixer with hose connection in only one element on the wall, so they are easy and self-explanatory to use. And for all your care and well-being needs, the iLook_move cosmetic mirror from KEUCO leaves nothing to be desired. The iLook_move is known for its solid design and versatile use, because its arm is very flexible. With a simple motion of the hand the height, distance, and vertical and horizontal angle can be set to the ideal position.In places such as hotel bathrooms, its special hinge technology makes it the perfect furnishing for frequent and heavy use.KEUCO’s COLLECTION MOLL series of accessories features softly rounded lines and corners, combined with rectilinear shapes. These design attributes can be found throughout the entire series. The organic and the formal fuse into one.On the single-lever mixers of the IXMO_solo fittings in the shower and the PLAN fittings at the washbasin KEUCO added an individual touch: They are decorated with an engraved ARBOREA logo.

SFS specialist fastening systems were used to secure the striking shingled, multi-coloured, metal façade on the first direct Leeds Arena.Using SFS fasteners resulted in significantly reduced fixing times and helped keep the project on its critical timeline.Comprising of 6,000 square meters of aluminium shingles in five different colours, the cladding was installed in layers onto stainless steel clips and held in place using 35,000 SFS aluminium BULB-TITE® rivets.In addition, 3000 self-drilling SL3/2 fasteners were supplied to fix the perforated, aluminium mesh rainscreen panels to the structural backing wall. 7000 low profile, irius® fasteners were also used to fix Kalzip’s Kal-Plank system, at the rear of the building. The design and construction achieved a BREEAM ‘Very Good’ rating.The result provides a spectacular display surface for the coloured lighting which transforms the exterior façade at night by reflecting the mood of the concert within.The 13,000 capacity concert venue features an impressive uninterrupted interior construction, designed to allow all seats perfect sight-lines to the stage. The complex 3500 ton steel structure was topped out by a 45 meter long proscenium beam spanning the width of the building.Headed up by Leeds City Council, the £60 million project was completed in 96 weeks and opened in September 2013. The venue has helped increase job prospects and the region's economy.A success story for Leeds, Yorkshire and all involved in designing and building this venue.

The striking interior was designed by LaVita Style and features Perlata providing a rich, yet elegant finish to the walls in the reception area and corridors. The design uses light and shade to reveal subtle textures and tones resonating a calm and reassuring atmosphere. Working to a soft colour palette the use of additional custom ArmourFX Granite polished plaster panels to the front desk creates a stunning first impression.Lucy Walker, interior designer at Lavita Style Ltd comments “We chose Armourcoat for this project for their specialist expertise and creativity and were absolutely delighted with the end results. We wanted to create a striking yet welcoming reception and waiting area and this was achieved through Perlata’s beautiful finish in a range of tones and colours. Armourcoat realised our vision throughout the whole design process and delivered seamlessly. I would certainly choose Armourcoat for any future projects”The new dental practice, White & Co is part of the innovative redevelopment work to convert the Grade II* listed legendary landmark into a unique blend of residential, commercial, and cultural spaces. Armourcoat has also been specified in various other projects within this exciting development including the Boiler House and Switch House West where Armourcoat Tactite was applied within various bathrooms, ensuites and powder rooms and Embassy Gardens which included Armourcoat Koncrete finishes to entrance areas and columnsClient: White & Co, Battersea Power Station, London Designer: La Vita Style @lavitastyleltd Contractor: Apollo Interiors Photography: Mark Bolton @markboltonphoto

Lift lobbies in a central London office building were part of a total office refurbishment project on multiple levels. GEC Anderson’s stainless steel cladding contrasts effectively with the neutral wooden boarding to the opposing walls. The lighting, combined with the floor and ceiling finishes, complete the carefully and meticulously designed circulation spaces to provide a high quality, creative yet totally professional result.GEC Anderson were responsible for measuring, production, delivery and installation of the stainless steel elements that were supplied in phases to suit the stringent works program of main contractor, Sykes & Son Ltd. In advance of this, a significant amount of consultation and liaison with the design team was required to ensure that the detailing would be precisely as anticipated and required.GEC Anderson brushed satin stainless steel was used throughout but each and every section of the cladding was purpose made to provide an exact fit to the irregular walls as well as to allow for varying celling and floor levels. Managing Director, Martin Tye, comments “Getting the measurements correct was absolutely key to the finished results. It was quite a challenge, given the timescale and the fact that it was such a busy site where multiple trades were required to work in the same areas but the overall results were very pleasing.” He continues “Time and time again we see that the end result can appear so simple but achieving it can be rather complicated!”GEC Anderson, who are known mainly for their bespoke stainless steel kitchen worktops, also supply stainless steel cabinets, shelving, spahsbacks, panels and doors. Since their founding in 1962, much has happened in the world of stainless steel but there is a constant that lies at the core of it’s offering – the honest beauty and practicality of the unique material of stainless steel. It seems to be timeless.Founded in England in 1962, GEC Anderson has pioneered the development of made-to-measure stainless steel products. Today, the company’s range also includes standard and modular stainless steel options. Products include sinks, worktops, cabinets, shelving, splashbacks, doors and sanitaryware for use in domestic, commercial and specialist environments. All products are manufactured to ISO 9001 and backed by a comprehensive support service from planning and product specification to installation and maintenance.

The Project  Friargate One is a 150,000 sq ft, 13 storey, low energy building forming part of a £700m project to create a new business district in Coventry.  The building sets the standard for the remainder of the 37 acre Friargate scheme that will include 13 more office buildings, two hotels, homes and shops all set to transform the area around the train station. This project is the largest development in the West Midlands Combined Authority.   The Challenge Deliver a product to satisfy the architects design & meet the highest standards offered within the industry. Provide a full range of accessories to compliment the system. Manufacture bespoke boxed out mirror units complete with rebated lighting strip. Ensure the system is installed to highest standard to create a seamless fronted wall of cubicles and superloos across varying floors.  The Solution Floor to ceiling Flush 44 system installed throughout male & female washrooms and unisex superloos situated over two floors.   The system encompasses a 44mm MR core with a hardwood rebated edge detail. The overall finish is modern and sleek creating a seamless flush wall of cubicles with complete privacy and comfort for the users.Close management of each phase from site survey through CAD drawings, call up and manufacture ensured we had complete control of the project and were able to accurately survey the areas and install the seamless system desired by the client.SpecificationProduct Range: Flush44 HPLDoors: HPL Bonded onto 44mm MR Core, Formica Graphite F7837. Hardwood rebated edgesPilaster: HPL Bonded onto 44mm MR Core, Formica Graphite F7837. Hardwood rebated edgesPartition: Partition: HPL bonded onto 38mm MR Core, Formica Folkstone F7927Ironmongery: Stainless SteelAvailable Finishes:These Systems Are Available In The Following Finishes:• Natural Wood Veneer• High Pressure Laminate• High Gloss LaminateAccessories Product Range W/C'sSpecificationProduct Range: AccessoriesMirror Backing Panels: Blanc Menuires B015 with 4mm Safety Backed MirrorsWaste Bins: Prestige Waste BinOther:Paper Towel HoldersWaste BinToilet Roll HoldersSoap Dispenser

OverviewThe Mayson, a new boutique hotel in Dublin’s regenerated Docklands, consists of two protected buildings on the city’s North Wall Quay – a traditional dockers’ pub and a 19th century timber warehouse. Features include Ryleigh’s rooftop restaurant, and a boutique barber shop set in a traditional pub, The Bottle Boy.Project criteriaA critical aspect of the design was to restore and knit the two buildings together in a way that preserved their industrial character. The hotel is a landmark feature in the Dockland area, sitting on North Wall Quay overlooking the River Liffey, a testing marine environment for architectural metalwork, making their protection paramount. A Corten-like finish had been suggested for the exterior metal fins, to look like rusted steel, but the designers wanted to avoid run-off from storm water drainage staining surrounding structures.The SolutionPowdertech Evolution™ finishes emulate metal patination but with no run-off and staining. A range of ‘rusted’ ‘Corten’ finishes is included in the Evolution range, all of which conform to ISO 12206 and Qualicoat specifications.The client chose one of the brightest – ‘Sahara’. As the images show, the colour changes depending on the light, and looks particularly stunning in full sunlight, complementing the red brick of the former dockers’ pub. Powdertech coated 2,100 linear metres of box-section aluminium to form one hundred and fifty vertical fins of 14m in length extending on the upper storey of the building. A marine-grade epoxy polyester primer was applied after a high etch-rate pre-treatment and before the Sahara coating in order to ensure excellent protection. The building retains its heritage and brings a distinctly warming glow to the entire area, even on a dull day.BenefitsThe Evolution range has up to a 25-year guarantee for gloss, colour and adhesion.Colour, tone and texture are our passion and we have the expertise to develop bespoke finishes.Powdertech has over 30-years’ experience in professional architectural powder coatingPowdertech's rigorous non-chrome pre-treatment system offers the best preparation for architectural aluminium.Powdertech’s flexible plant can coat a wide variety of shapes and sizes of architectural metal work and fabrications.