"insulation"

Glazing Vision worked closely with Architect, A R C Architecture Ltd, and Contractors, Matrod Frampton Ltd, on this incredible project located in Lymington, Hampshire, where the client was looking for their new pool room extension to include a large, flat rooflight, creating a peaceful and naturally lit room, perfect for a relaxing swim. They were also looking for a rooflight within the loft area of the home to allow natural daylight and ventilation to the space.Glazing Vision’s Flushglaze Fixed Multipart Rooflight in Slate Grey Matt was specified for the roof of the pool house, which was an impressive 3800mm x 10360mm in size, which almost mirrors the size of the swimming pool below.Bespoke glass was selected for this particular project. The double-glazed outer pane was made up of heat soak tested, toughened glass which offers a greater resistance to thermal stresses and provides better protection against glass breaking, reducing risk of injury, essential with a pool directly below.Argon gas filled the space between the panes of glass which helps insulate the room and minimises the transfer of heat through the glass along with a black warm edge spacer which is an insulating plastic composite material that becomes a barrier to heat loss.The inner pane consisted of heat soak tested, toughened, PVB laminated glass which prevents glass shattering under impact by holding the shards together on the membrane so they cannot become lethal, and includes a soft coat low E rating of 1.1, helping with the energy efficiency of the room by reducing energy costs.The product was tested to class 1 in accordance with CWCT TN66/67 which is essential for rooflights which might be walked on for occasional cleaning/ maintenance activities, and which will therefore need to support both the weight of people on the glass and their equipment, which may be required on this occasion.The rooflight was supplied in 6 sections with internal back-to-back angles at the joints between each section. The 6 sections were sized to achieve an equal split when viewed from underneath.Our Skydoor Electric Hinged Access Rooflight was specified on the roof of the loft space which is ideal for ventilation and regular access, and offers natural daylight to the space below. Intelligent actuators ensure synchronized operation between the two supporting mechanisms, so the Skydoor opens to a maximum 87° in one fluid, trouble-free motion, providing you with easy access to the space above.The glass was a double-glazed unit comprising of a heat soak tested, toughened, soft coat low E (1.1) outer pane, with Argon Gas within the space between the panes and black warm edge spacer, with the inner pane consisting of heat soak tested, toughened, PVB Laminated glass, and was also tested to class 1.Both rooflights were expertly installed by our sister brand, Glazing Renovations.“Glazing Vision were helpful in explaining the two different upstands required for the different glazing systems. The installation team were helpful and carried out their work in a professional manor.” – Steve Davies, Site Manager, Matrod Frampton.

URSA storey’s high with new Whitechapel development Global insulation manufacturer, URSA, has seen some 25,000 m2 of its specialist insulation materials specified and installed at one of the capital’s largest residential development projects in recent years. Ian Claydon, Technical Manager for URSA UK, describes the specification through to installation journey: “The Silk District is a new development located close to Whitechapel Station and within walking distance to the City of London. The Whitechapel based scheme compromises three residential blocks set around a piazza with private landscaped gardens. New commercial space on the ground floor of The Silk District will welcome many new and exciting restaurants, cafes, bars and shops. The Borough is considered an important area of regeneration for London and will meet the aspirations of neighbouring Shoreditch, Brick Lane, Spitalfields Market and Bethnal Green all of which are less than a 10-minute walk from the development.  “Our work with the London based property development company leading the scheme, Mount Anvil, began in November 2018. We provided advice and guidance on making the correct choice of materials, achieving compliance with Building Regulations (thermal performance, fire resistance requirements and resistance to rain penetration) and compliance with the NHBC Standards. We also provided numerous thermal models, U-value calculations and associated condensation risk analysis. The Mount Anvil team were undoubtedly impressed with the speed and quality of URSA Technical Services. “We were involved with external wall construction as well as the design of a brick clad rainscreen system and continued to work extensively on the scheme throughout 2019 as the design developed further. Work was delayed at the beginning of 2020 due to Covid and re-started in July 2020. Ian explained: “Collaborating with the client in these very early phases ensured that they were able to select a product that is entirely right for each and every one of their primary and secondary needs. Planning was critical within the design and roll out and meticulous attention to detail was applied during these initial phases and throughout. Key products installed included URSA’s Cavity Batt 32 & Walltec 32 – 12,000m2 and URSA Acoustic Roll - 13,000m2.   URSA Walltec 32 is a lightweight, non-combustible, semi-rigid glass mineral wool slab treated with silicon based water repellent. It is faced with a black glass tissue on one side and are ideal for use behind rainscreen cladding systems in both new build and refurbishment projects.URSA Cavity Batt is a lightweight, semi rigid glass mineral wool slab treated with silicon based water repellent. It is suitable for use in both fully and partially filled masonry cavity walls up to 25m high.Mark Guest, Regional Sales Manager for URSA UK continued: “URSA Walltec proved to be the ideal choice due to its outstanding fire performance qualities, with a Euroclass rating of ‘A1’ making it totally non-combustible and the ultimate in safety specification for behind cladding systems. URSA glass mineral wool is manufactured from an abundant, sustainable resource and utilises at least 50% glass waste. From an installation perspective, the black glass fleece tissue facing means that the product could be used behind open joint cladding without being seen.“The Cavity Batt is available in a wide range of thicknesses, ensuring the client was able to meet all appropriate Building Regulations and standards. Our new generation URSA TERRA mineral wool has a ‘soft touch’ feel making it easier to handle and install whilst still maintaining its excellent mechanical properties.“There were several other over-arching factors to consider within this scheme and those included the sheer size and scale of the site and its location in a packed city centre. The lightweight nature of both products meant that they could be compressed therefore saving time and money on transport, effectively halving the number of journeys needed. This meant that more products could be delivered to site and stored in an area where space was at a premium. “Work is now once again very much underway with an anticipated completion date of early in 2021. The property market is thriving once again and Whitechapel is becoming recognised as a hotspot for investment and is now being considered the destination of choice for many new businesses. Our distributor partner, Encon Insulation in Dagenham, worked closely alongside us during the project” Ian concluded: “It’s fantastic to see two of our core product specified at this major residential development. We have enjoyed a collaborative, partnering approach with the client throughout. The client has been keen to specify the safest, most durable, sustainable and quality product available on the market today and we’ve been pleased to support them in their design journey through to installation.”