"door locks"

The design committee at The Highdown Hotel opted for Hafele's Dialock DT710 door terminal sets for their upgrade, designed and was supplied and maintained by Häfele. An advanced locking and identification system, Dialock uses electronic keys, terminals and programming units to allow authorised access with the option to add on keyless smart phone entry at a later date. All of the Highdown’s guestroom doors, as well as the building’s main entrance, have now been fitted with Dialock. The stainless steel handle sets gave the required contemporary touch to a traditional environment.

Staybridge Suite is located close to the main entrances to Terminals 1,2&3 of Heathrow Airport and now home to Helmsman Lockers. Our client chose bespoke Helmsman Heavy Duty Two Door Lockers with combination locks and engraved numbers and rovere fumo laminate doors and side panels. The hotel lockers can accommodate luggage and other bulky items such as foldable bikes. At Helmsman, we are here to accommodate your needs for foldable bike storage with the Staybridge Suites a perfect example of maximising the use of the bespoke lockers.

No other material could have produced such an exquisite end result as steel for this project in Surrey. Clement were contacted by the owners who wished to replace all of their original steel windows and doors. Following careful consideration of what was available Clement's EB24 suite of steel windows was chosen. The stunning double doors benefit from the use of surface mounted cremone bolts instead of a usual lever locking mechanism which means the centre bar of steel is slim and elegant just like those of the outer frames.

Located at the first locks of the Manchester, Bolton & Bury Canal, the second phase of the £1bn Middlewood Locks development in Salford delivers 546 apartments across 4 new buildings with private podium gardens. Phase 2 of the development is part of the wider mixed-use scheme to regenerate 25 hectares of brownfield land with new apartments, office space, a hotel, bars, restaurants, car parking and a gym.The large catchment area of the development discharges to the newly renovated balancing basins that service the confluence of adjacent canals and the River Irwell. An extensive podium drainage landscaping design was required to meet the site’s strict discharge limits and reduce the impact of surface water run-off to less than that of the pre-developed brownfield land.The ABG blueroof storm water attenuation system specified for the scheme covers over 9,500 m2 and restricts rainfall outflows to below the 16 l/s discharge limit on Plot G of the site and within the 20 l/s limit for Plot H. The system incorporates 27 ABG restrictor chambers above rainwater outlets which are configured to restrict outflow rates to within the discharge consents.The system is designed to attenuate a 1-in-100 storm event (data extrapolated from the local FEH 2013 flood report), plus 30% allowance for the effects of climate change. The geocomposite drainage and attenuation layers and network of restrictor chambers serve to filter surface water run-off pollutants to treatment train stage one of the SuDS process, meaning no other filtration measures are required. The top of the chambers are designed to sit flush with the porous resin paving surface, and different configurations and thicknesses of drainage composites were used to achieve the correct height of system to match the different surface levels. The ABG Deckdrain geocomposite layer provides multi-directional flow capacity to efficiently channel rainwater to the nearest restrictor chamber outlet whilst the integral geotextile filter helps to prevent the cuspated drainage core from becoming blocked.The choice of hard and soft landscaping materials specified for the development are of a very high standard and the inclusion of large areas of green spaces and substantial planting creates valuable new private gardens and amenity spaces for the area.The attenuation system configuration was designed and supplied by ABG and installed over a 6 month period by ABG Installs. As part of the storm water attenuation system design, a new restrictor chamber diffuser was developed to fit directly onto the downpipes of the apartment buildings. The attenuation voids were modified to allow for cable ducting to pass through them and a method was also developed to provide structural drainage beneath the concrete footings of the stone planter walls.

Bath Abbey sits at the heart of the historic city of Bathwhere there has been a place of Christian worship onthe site for more than 1,300 years. The Bath AbbeyFootprint Project sought to ensure the 17th CenturyGrade I listed building remained a focal point forgenerations to come. The project aimed to sensitivelyrenovate parts of the Abbey whilst modernising itsfacilities to cater for present-day demands in a buildingwhose origins date back to 1499.Allgood worked with Feilden Clegg Bradley Studiosand Emery Bros Ltd to provide a complete packageof ironmongery and a comprehensive access controlsolution. The project required many bespoke items toaccommodate the Abbey’s historic architecture.Given the age of the building, there were particularchallenges to overcome during the specificationprocess. A highlight being how to bring a 400-yearoldlock back into working order as part of a modernaccess control system. The lock on the main doors of theAbbey had not been used in decades and the key hadbeen lost many years ago. Allgood delivered the lockto its specialist partner, Guardian Lock & EngineeringCompany, who called upon the services of one of theirretired locksmiths to diligently disassemble the lock,repair, and service it before crafting a new key.Another particular specification issue was improvingaccess control for the ancient catacombs which neededconstant airflow to maintain the right environmentalconditions, but they also needed to be secure.Allgood worked with the architect on several optionsto balance these needs in a way sensitive to the 17th Century surroundings. The solution was a door designedto have a clear gap on either side for airflow but narrowenough to maintain security. Allgood Secure also revisedthe internal exit and a second card reader was fitted toboost security, allowing a read in, read out system to givefull visibility of people arriving and departing. To completethe work, a specifically designed stainless-steel cover was fitted to house the electronic locking system.Alex Morris, Associate at Feilden Clegg Bradley Studios,commented: “From early stages in the project, wehave been very pleased to work with the Allgood teamon the ironmongery and access control for the BathAbbey Footprint project. We have benefitted fromtheir expert advice and extensive range of high-qualityproducts, needed to deal with the wide range of projectrequirements.”The Mode 3570 lever handle in a bronze Spectra finishwas specified throughout the Abbey, as well as a fullsuite of matching door furniture. This fully coordinatedrange not only provided the desired aesthetic but is alsodesigned to last. The comprehensive 25-year warrantyand Quadaxial rose, which is tested up to one millioncycles, means the lever handles are perfect for the highfoot traffic the Abbey receives. Allgood Secure also completed an access control systemfor the Abbey. Because many of the doors and frameswere protected by Historic England listing requirements,the team had to develop a sensitive yet functionalsolution. All visible products had the same Spectra bronzefinish to match the ironmongery, as well as installing entrycontrols for much narrower doors than usual.A video entry system was also required - but one thatcould function without disturbing events in the Abbeyincluding the regular choir practices. Rather than anaudio alarm, the team created a visual beacon using a25mm LED fixed to the choir room wall, allowing for anunintrusive system that would draw attention but notdisrupt any rehearsals.The entire access control system is networked sothat each door can be monitored, and access rightsmanaged easily via a simple database. The AllgoodSecure team has provided full training to all thosewho need it and have offered a package of ongoingmaintenance and support for the Abbey.

Jewers Doors has for many years supplied contour doors which are specially shaped to encompass the fuselage of an aircraft in order to provide an environmental seal. These doors allow part of an aircraft (e.g. the nose or tail) to be within the controlled environment of a hangar for maintenance, repair and overhaul (MRO) operations. With part (often the major part) of an aircraft remaining outside the hangar, space within the hangar is available for other aircraft to be worked upon – thus increasing productivity. Such an arrangement also means that MRO operations can be undertaken on larger Code E and F aircraft in hangars that would otherwise be too small.

Our most recent project was in Romford, London. We worked alongside Vincent Stokes on their refurbishment of the changing area at Central Park Leisure Centre. The project included a variety of new furniture for the changing rooms, Helmsman supplied new lockers and bench seating.The client chose our Leisure Lockers, which are manufactured with an aluminium body and solid grade laminate doors. These lockers are specifically designed to withstand an environment subject to high moisture, humidity and chlorine, perfect for swimming pool changing rooms such as this project. The choice of lockers for Central Park Leisure centre were a mix of 1 and 2 compartment lockers.Helmsman’s leisure lockers come in a variety of colours and finishes, and with a variety of suppliers, there’s a huge range of colours to choose from. For this project, Vincent Stokes requested lockers in 3 colours, with Greenlam Laminate doors manufactured in Pearly White, 268 Dust and 297 Blue Galaxy. These colours work brilliantly together and match the rest of the design in the changing rooms perfectly. A popular choice of lock for a leisure centre changing rooms is a coin return lock. The locks used for this project were Ojmar coin return locks, with wrist straps, perfect for a swimming pool environment to keep the keys safe whilst the customer uses the facilities. We also produced bench seating for the project at Central Park Leisure Centre, with both wall to floor benching complete with hook boards, and wall island benching. These were manufactured with Greenlam laminate slats in colour 297 Blue Galaxy to match the lockers and the rest of the changing room design. It was great to work with Vincent Stokes on this project. If you need leisure lockers, bench seating, or have a project you want to chat with us about, give us a call today on 01284 530427 or email specifications@helmsman.co.uk

From a design concept to delivering a compliant secure solution, Eurobond worked with a leading Worldwide tech giant to provide steel door sets to meet their function and performance.

Helmsman two compartment heavy-duty lockers were supplied, delivered and installed by Helmsman professionals in Trowse Primary School corridors. Bespoke specification of 1600mm height and a range of different door colours were chosen to brighten up this primary school. Each compartment door was fitted with an oval laminated number plate, from 1 to 60 twice. Blue and grey themed lockers were fitted on the first floor, while green and grey themed lockers were fitted on the second floor to split the floors. Diamond swivel locks were fitted on the lockers for an easy use and the pleasing aesthetics.

Bunn Leisure Holiday Park has revamped its facilities at Chichester resort. Part of the works included the supply of new leisure lockers and the refurbishment of the existing lockers for both the wet and dry areas of the swimming pool complex. We designed, supplied and installed the new units as well as completely overhauling the existing lockers. Lockers are all three compartments in standard 1800mm x 300mm wide and 450mm deep banks with aluminium body and laminated doors in a mix of colours. Works included replacing of door springs along with coin lock replacements, number wrist straps and locker numbers.

The lightwell lift includes caged, enclosed sides to secure the load and prevent the risk of anything falling from the platform onto people below. Interlocked doors were fitted to prevent any accidents whilst the goods lift is in use. Interlocks ensure that the lift will only operate whilst the doors are locked shut, opening again once the lift has travelled to the level required. This provided the team with a safe and efficient lifting solution when moving their big commercial bins from below ground to pavement level. The 500kg capacity allows deliveries to be taken from kerbside to the basement.

Located in Edinburgh’s prestigious Charlotte Square,these former National Trust for Scotland offices havebeen refurbished and redeveloped into commercialaccommodation.Originally designed by Robert Adam in 1791, the restorationof these 6 A-listed townhouses sees the architecturalintegrity of these neo classical facades, fully restored. Aswell as restoring the buildings exterior and interior, MorganMcDonnell Architects have also redeveloped the areabehind these old Georgian houses, linking the 3 centraltownhouses to a contemporary lightweight glass and ETFE(a fluorine based plastic) covered courtyard to provide32,000 ft2 of grade A office space.The balanced contrast between the old exterior andmodern interior is reflected throughout the building’s fabric,especially it’s ironmongery. A traditional oval design wasapproved for the knob handles as it provided the mostgrip available. A polished chrome finish was chosen asMorgan McDonnell Architects wanted a modern feel to thehardware whilst being traditionally sensitive to the age ofthe building. Initially Morgan McDonnell Architects wantedto use lever handles, but due to the listed status of thebuilding and the design of the doors (many of the originaldoors were refurbished) a knob handle was deemed themost suitable.Working with Morgan McDonnell Architects, Allgood Plcprovided a combined ironmongery and access controlpackage that included: hinges, door closers, locks, kickplates, signage and concealed electromagnetic locks. Allitems Allgood provided were delivered on time and withinthe clients budget.

Bradford District Care NHS Foundation Trust boast a brand new Assessment and Treatment Unit at the Lynfield Mount Hospital in Bradford.STJ Projects Ltd manufactured and installed a full range of doorset solutions across the new unit including:R-Quest Severe Duty Seclusion Suite doorsets, which are steel interlaid to provide a severe robustness R-Quest Heavy Duty Fire Rated doorsets R-Quest Heavy Duty Anti-Barricade doorsetsR-Quest Lock Back Frames, both 90 & 180 degree lock back facilitiesThese doorsets look stunning with real Ash hardwood frames and architraves, clear lacquered to show the beauty of the timber, along side the door leaves which varied in colour and material. The Seclusion & Common area Bathrooms were impact resistance and anti-bacterial PVC encapsulated and all other doors were faced with anti-bacterial laminate, with a natural Pearl Grey colour across all common areas with individual bedroom doors having their own unique colour. This ATU facility, for adults over 18 with moderate to severe learning disabilities and mental health problems, whose needs cannot be supported at home, in the community or in other adult mental health wards is a fresh offering to provide the much needed support they deserve from daily living needs to maintaining independent skills.

Battersea Dogs & Cats Home was established in 1860 by Mary Tealby as the Temporary Home for Lost and Starving Dogs. Since it opened, the charity has cared for more than 3.1 million dogs and cats. To increase capacity at their old Windsor site BDCH are adding a new wing.The animal charity required specialist doors for a new intake building which includes 27 kennels and 4 maternity kennels.Dortek supplied hygienic hinged doors with Stainless Steel frames throughout the new building. Some doors also had automations and access control locks for ease of access and increased security. Fire doors with 30 minutes certification were also supplied for the protection of animals and staff throughout the facility.The GRP construction of Dortek doors makes them easy to clean, waterproof and extremely robust. They are ideally suited to animal care facilities requiring a low maintenance design.

In our first in a series of case studies, we’ve invited FireDNA Alliance Partner, Steve Neilson to share his experiences using the FireDNA system to inspect and catalogue 9422 fire doors in three months, on behalf of Mitie, for the Scottish Fire and Rescue Service.The Scottish Fire & Rescue Service is the fourth largest in the world and ensures the safety and wellbeing of the people in Scotland. Operating out of 547 buildings across 357 sites, these centres are managed by the UK’s largest ‘Facilities Management’ provider Mitie.Following several months of discussion between Mitie and the Scottish Fire & Rescue Service regarding the status of the fire doors across their property portfolio, a tender was issued for an extensive fire door inspection and evaluation programme to be undertaken.Having secured the works through competitive tender, we further engaged with Mitie and the Scottish Fire & Rescue Service team. Working through their property asset registers in detail we gained a full understanding of the scope and requirements of the project.Following weeks of detailed project planning and final agreement on the timeline, it was evident that we had just over 3 months to inspect and report our findings on 9422 fire doors across the 357 site locations, and this all had to be done during the winter months of late 2021 and early 2022.In order to deliver on such a tight timescale, absolute dedication and collaboration was required from all parties…the project managers, admin staff and fire inspectors as well as the teams at Mitie and Scottish Fire & Rescue Service. To support this challenging task we armed our resources with a new cloud based system called ‘FireDNA’.We had been approached by FireDNA a couple of years earlier to see if we would be interested in helping to beta test their new ‘Fire Door Inspection and Monitoring Software’, to which we agreed, little did we know at the time that this software would prove invaluable to us further down the line!Deploying teams of up to 10 Fire Inspectors at a time, armed with the new and now completed FireDNA Inspection and Monitoring App, we set about working through the phased inspection schedule.Having been involved in the development testing of the FireDNA software, we had no doubt this system would, increase the speed in which the surveys were carried out, and dramatically reduce the time and effort in reporting the findings. Working closely with the FireDNA software support team, who assisted us in the initial software training, our Fire Inspectors were able to work efficiently and effectively ‘at pace’ through the challenge. The FireDNA App also has ‘LiveChat’ built in so any questions or queries by our operatives in the field were easily and quickly dealt with by the FireDNA team, which meant there was very little downtime during the inspection process.One of the great benefits of using the FireDNA App is that everything is ‘real-time’ so our office-based project managers could immediately see how the inspections were progressing. Once the inspection data and supporting photography was in the system report generation was largely automated and nicely formatted into MS Word and Excel documents.These reports could then be initially shared internally with our remedial work/replacement estimators for accurate cost estimates, who in turn could then produce accurate cost estimates and quotes for the works required as each buildings inspection was completed. This created a very fast, efficient and accessible workflow process for the whole team.FireDNA is not only a fantastic fire inspection and reporting tool, but also initiates the ‘golden thread’ of information, allowing building owners and managers like the Scottish Fire & Rescue Service and Mitie to take ownership of the ‘live data’ in the system, which can easily be updated and shared as each fire door asset is inspected, monitored and maintained year-on-year, which will soon become the minimum legal requirement.FireDNA also enables building owners and facility managers to create status reports for O&M compliance, which can be shared with insurers and the like, as well as appointing contractors and maintenance teams to carry out and catalogue remedial works and new installations, which are all date-stamped and locked into the system.In our view, anyone involved in fire inspections, installations, planned preventative maintenance and asset recording of passive fire products, such as fire doors, doorsets and fire screens should be using the FireDNA system. For duty holders such as building owners, facility managers, landlords and surveyors to make sure the assets they are responsible for are safe and compliant and the data unambiguous and accessible by all that need it, including residents.We believe FireDNA is the best system on the market and anyone who uses it will appreciate not only the time and money savings but importantly how this centralised system improves work standards across the full lifecycle of passive fire products. Steve Neilson – FireDNA Alliance Partner – Scotland

Heathrow Airport is the UK’s largest and busiest airport connecting the UK to over 80 long haul destinations and flying over 80 million passengers worldwide. Project/doors: Hart has over installed over 280 doors across all terminals including high speed smoke screens, fire conveyor shutters, security shutters, internal and external high speed doors, insulated fast action doors, sectional doors and pedestrian doors.The challenge Terminal 5 baggage handling system serves around 32 million passengers per year and handles around 6000 bags per hour.  Hart were asked to design, manufacture and install a specialist and unique automatic smoke screen system capable of handling over 6000 bags per hour, while providing a seal for 30 minutes in the event of fire. The solution Hart were the only company to provide a solution that fully met all the design requirements. Two years after the initial talks with the client, Hart successfully completed the manufacture and installation of all of the high speed smoke/fire screens within the main check in area, comprising 102 check in desks. Hart also installed a mixed package of roller shutter and fire doors in the lower ground service area and fire shutters on the Tube access tunnels leading directly to Terminal 5. The success Hart was chosen for the quality of engineering and the ability to meet the clients demanding specification and operating requirements. Hart continues to work with contractors and OEM’s such as Vanderlande, Mace and Balfour Beatty on site supplying upgrades and new doors when required

Here at Helmsman, our team manufactured and installed 25 three-compartment Laminate Lockers, in our wet spec which helps the material not to rust, peel, or crack under humidity. The specifications of the laminate lockers were 1800mm high, 278mm wide, and 450mm deep. The body of the lockers was powder coated in the shade of ice’ whereas the laminate doors and end panels were in the beautiful ‘English Oak’ by BioCarbon Laminates. BioCarbon is a company that provides laminates that focus on reducing carbon. Laminate lockers are an excellent choice when it comes to commercial office lockers as they allow employees to store personal belongings in a secure area.The Solid-grade Laminate lockers were completed with vinyl numbers above the locks which were the Diamond Hasp locks, for users to use their own padlocks. It is a great choice as the users will be assured that their personal belongings are safe within the locker.

A £2.7million Environment Agency project to renovate an ageing river sluice facility on the River Medway in Kent, has required the technical attributes of webercem five star repair concrete and the high-build properties of webercem HB30 mortar. The structural sluice repairs are now complete with new gates and operating systems installed, bringing the sluice performance up to standard. Reflecting the substantial improvement in the river water quality over recent years, a new fish and elver pass has been created to enable fish to travel further upstream in the clean waters. This has enhanced the habitat in upper sections of the Medway, whilst allowing migratory and freshwater fish free passage. Constructed in 1937 the Allington Sluice lock gate is the last on the River Medway before it becomes tidal. Although the sluice is not listed, the Environment Agency took a keen interest in the repair of the structure due to its location adjacent to the Museum of Kent. Areas of failed surface concrete that had spalled, due to 70 years of weathering, were repaired sympathetically to match the existing finishes. These areas were cleaned back to sound material with all loose material removed. The major repair areas required shuttering before pouring in the flowing recasting concrete. webercem five star repair concrete is a pre-blended cementitious material that conforms with BS EN 1504 : 3 as an R4 mortar and also with the Highways Agency specification BD 27/86. It contains non-reactive aggregates and low alkali content. This is a shrinkage-compensated, high-strength flowing repair concrete specifically designed for permanent structural repairs that delivers a compressive strength of 65N/mm² after 28 days.Additional smaller damaged areas of the sluice structure have been improved with webercem HB30 repair mortar which is ideal for façade repairs where high compressive strength is not required. webercem HB30 is an acrylic-polymer modified, high-build façade repair mortar that complies with BS EN 1504 : 3 as an R3 mortar. Damaged areas were cut away and any steel re-enforcement was cleaned and coated with webercem keycoat prior to the application of the webercem HB30. This product has a unique shrinkage compensation system that ensures long-term dimensional stability. webercem HB30 is easy to apply with low permeability to water, carbon dioxide and chlorides.Main contractor Jackson Civil Engineering of Maidstone, Kent, carried out the sluice gate works while Structural Renovations Ltd of Slough, Berkshire, carried out the concrete repairs in the overall reconstruction, renovation and modification programme of the main structure. The project was designed by Atkins for the Environment Agency, who also undertook site supervision during the renovation procedure. In addition to the repairs and fish pass, a new wheelchair access has been formed allowing cross river access at this point on the Medway.

London based Granit Architects, chose Clement Windows to manufacture and install this fabulous two storey steel screen for this residential project in Clapham. Clement’s EB24 steel window system was specified for its slim, strong sections, allowing maximum light gain. The screen which included a multi point locking single door on the ground floor is polyester powder coated in RAL 9005 matt black and finished with a dark bronze effect handle.

Lang+Fulton have supplied a bespoke 6.6 x 5.7m compound for euorbins and general storage. The compound was sub-divided into two separate areas, each with 1.4m wide double doors for access, secured with Locinox euro-cylinder locks and dropbolts.The panels were made from DeltaWing-100 to provide total visual screening and were supplied hot-dip galvanized with an additional polyester powder coating colour RAL 7040.

Installation of 3 number MG100 Semi Electric Movable Acoustic Walls for a large company in London. This design has allowed our client to have 4 separate rooms or 1 larger flexible working space. With a flick of a switch there is no need to manually lock each panel off with the automatic top and bottom seals locking off the system. One of the closed spaces did not have an internal access door so we included an inset door panel within one of the standard panels to allow for access in-between the rooms once the panels are in their closed position. Our client wanted as much clear workable room space as possible and using the double point stacking tracks the panels foldaway into a recessed pocket. Grey laminate panel finish chose to give a clean design and match other furniture within the room. An element of flexibility is suddenly added to your space. And the environment can quickly be manipulated to cater for any of your flexible space needs, whether that be for meetings or a little bit of privacy. At ModernGlide, we have sourced an excellent range of panel finishes, ranging from our standard melamine to veneers to personalised digital images, to give you complete design flexibility.

Cargill is an international food, agriculture, financial and industrial products and services business. Cargill connects farmers with markets, customers with ingredients, and people and animals with nourishment.Project/doors:32 doors across six facilities12 Storm, 3 Super, 3 Mini, 6 Insulated Fast Action Roller Shutters, 4 Electric Operated Roller Shutter 4 Special Doors. Ongoing replacement of old doorsThe challenge Hart were consulted to help reduce vermin access mainly from pigeons, seagulls and geese attracted by the feed/agricultural nature of the production process. The doors needed to be capable of thousands of operations in dusty conditions allowing large vehicles fast access to the facilities. The solution With over 30 Hart doors installed across six production facilities, the latest contract replaced existing roller shutters, which remain open all day, with seven Speedor Storms, one Speedor Super and one fast action roller shutter. The emphasis was on speed of open/close cycles to significantly reduce the vermin access and improve energy efficiency. The success The investment by Cargill is also part of a drive to improve energy efficiency by 5% and to maintain a better working environment and temperatures within the building as well as preventing unauthorised access to different areas of the plant. The Review:“I wanted to say I was really pleased with the job David and guys have done. They showed great work ethic, housekeeping was spot on and their attitude to safety on site was great- whenever they were challenged they were very patient and helpful.”Gavin Dunn, Project Engineer, Cargill

Amazon is the world’s largest technology company, with one of the most advanced fulfilment networks in the world.Project/doors: 9 Speedor Storm2 Speedor MiniThe challenge Due to the high-volume of traffic in the fulfilment centres where products are stored and shipped,efficiency of vehicles coming in and out of the building and the safety of drivers is paramount. Slow moving sectional overhead doors were left open to allow speed of access which is vital to efficient deliveries but resulted in heat loss. The solution Seven large Speedor Storms seamlessly integrated with existing doors in a heavy traffic despatch area. The Speedor Storms allow quick and easy access to the openings whilst maintaining internal temperature with its fast open/close action. Due to the quality and longevity of Hart Speedors there is less stress and downtime fixing and replacing defective doors so productivity is unaffected. The success Following the successful installation of Speedor Storms at Amazon in 2016, Hart was chosen as a reliable and trusted supplier. Hart provided expert design advice, specification and installation of the doors to an agreed time frame while not affecting the distribution process. Amazon was given peace of mind with a 2 year warranty as standard.

Komatsu is one of the world leading manufacturers of construction, mining and utility equipment.Project/doors:Over 60 doors – Speedor Cleanroom, Speedor Storm, Electric Roller ShuttersThe challenge Safety and reliability are paramount in this highly efficient 200,000 sqm facility, which has produced over 60,000 units. Although only a small part of the building, industrial doors cause the biggest problems if they are not designed with the environment and usage in mind. The solution As a British manufacturer, Hart provides Komatsu with a first-class service, offering support and parts when required and due to the reliability of the doors, maintaining the safe, efficient running of the facility. Each Hart door is made to measure and each safety device and activator is fitted to suit specific areas, giving Komatsu a safe and secure working environment for its employees The success Komatsu and Hart began their relationship in the 80’s with the installation of one of Harts earliest prototype Speedors. Due to the success of the door, 4 Speedors and 4 roller shutters were installed in 1992. Over the years, Hart has installed over 60 doors to the facility, only recently replacing some of the original doors installed in 1992. The Review:“Good customer services and support.” Scott Atkinson, Komatsu, UK

With stringent demands in terms of design, comfort, and functionality, the new City of Glasgow College is considered a ‘University of the Future’. GEZE UK made a key contribution to the modern look & feel of the technical college with custom door solutions, including revolving doors and swing doors.State-of-the-art door systems for the City of Glasgow CollegeThe £228 million project for a capacity of 40,000 students and 1,300 employees was completed by the Sir Robert McAlpine construction company. The entrance areas on the west and south sides were designed using GEZE door technology to reflect the structural aesthetic of the City Campus.The highly modern new building, with over 1,000 classrooms, boasts a striking design while fulfilling high requirements for functionality and safety.Manual revolving doors ensure the flow of trafficThe west and south wings impress with modern steel and glass façades with two manual revolving doors. An additional automatic swing door was installed directly beside each of the revolving doors.Manual revolving doors with TSA 325 NT door drives are the ideal solution for the building's specific requirements in terms of functionality and ease of access. The generous door leaves are easy to move, and the integrated control mechanism stops pushing behind an individual entering into the swing door. In addition, the revolving doors effectively protect the lobby from draughts, dust and noise.Automatic swing doors, designed as emergency exitsThe automatic swing doors directly besides the revolving doors were equipped with electro-mechanical GEZE Slimdrive EMD-F swing door drives to offer maximum flexibility. They can be activated with the push of a button, providing barrier-free access for persons with restricted mobility. The door drive is just 7 cm tall, and integrates discreetly into the door frame to move the door leaf precisely, reliably, and extremely quietly. In the event of a fire, the swing doors also serve as barrier-free emergency exit doors.Automatic sliding doors: effortless door comfortA single leaf automatic sliding door with GEZE Slimdrive SL NT drive guides students and visitors into the interior of the Riverside campus. The highly modern building, which was nominated for the prestigious Stirling Prize, houses student accommodation hat is home to over 3,000 ship building and marine technology students.The slim Slimdrive SL NT drives (just 7 cm tall) integrate almost invisibly into the modern, column-encased entrance area, moving door leaves of up to 125 kg quietly and effortlessly. This makes it the ideal drive solution for a public building with consistently high traffic in both directions – especially one such as Riverside that is also used as a residential building. GEZE's modern door solutions have played a key part in ensuring students can move comfortably and safely through their environment.

The original main entrance door to a residential block posed significant challenges, being both unstable and unreliable, ultimately leading to a less-than-ideal user experience. Recognising the need for a substantial upgrade, our focus shifted towards implementing a solution that could withstand the diverse demands placed upon it by the building’s occupants.In response to these requirements, we introduced a robust commercial door section that not only provided enhanced security and stability but also offered unparalleled reliability and durability. This new system was meticulously designed to ensure ease of operation for the end users, effectively addressing the previous difficulties they had encountered. Furthermore, by seamlessly integrating with the existing access control infrastructure, our solution not only facilitated smooth transactions but also offered cost-effective servicing options for ongoing maintenance needs. Through this comprehensive approach, we successfully transformed the main entrance into a secure, user friendly gateway that met the diverse needs of the residential block’s occupants.

Bettys & Taylors of Harrogate is a fourth generation independent family business, passionate about some of the finer things in life – beautiful tea rooms, handmade cakes, traditional breads, proper tea and top quality coffee. They are the business behind Yorkshire Tea, Taylors of Harrogate coffee and the famous Bettys Café Tea Rooms.Project/doors: 5 Speedor Super, 1 Speedor Mini, 12 Fire Shutter, 21 Pedestrian doors, 1 Electric roller shutter, 1 Insulated Roller ShutterThe challenge Due to the size and weight of the insulated roller shutter at 10.5m wide and 6.3m high, this was a difficult installation in an area where the headroom was very tight. A crane was required to lift the shutter into position after opening two holes in the building’s roof so lifting chains could be dropped through to facilitate moving the shutter into position. The solutionHart was contracted by Sir Robert McAlpine to supply and install a range of industrial doors at the Taylors of Harrogate site.  This included the installation of the three-tonne insulated roller shutter completing a work package of over 40 doors. The success The installation of the shutter concluded a project which Hart was involved with through Sir Robert McAlpine and which saw almost every Hart door product installed – from Speedor high speed doors to fire shutters, security shutters and steel personnel doors. 

Lockerpods bike locker offer safety and security for your bike. Manufactured from recyclable, low density polyethylene, the LDPE is UV treated and will not deteriorate or dis-colour over time. The door hasps are made of protected Stainless steel tabs, drilled to accept padlocks. Internally it is designed so that a ground anchor can be installed to accept a D Lock or chain for additional security. Lockerpods are weatherproof so your bike is kept clean and dry and there’s space to store your helmet and other bike kit safely with your bike.

Whilst the summer holiday is going on, many schools are thinking about replacing or expanding their current metal lockers. Our team at Helmsman manufactured and installed new lockers at West Coventry Academy. West Coventry Academy is a co-educational secondary school and sixth form.The academy requested metal school lockers, with 4 compartments, with sloping tops. Sloping tops are a beneficial option for schools as it is a way to prevent people from using the top of the lockers as a storage area which could cause a safety hazard.Metal lockers are a popular and essential option for schools, as they can come in a variety of compartments, shapes, colours, and sizes. Furthermore, the door frames of metal lockers are robust, and designed to last long term.Our team manufactured 116 four-compartments with the size of the lockers at 1780mm high, 305mm wide, and 460mm deep. The doors of the lockers were powder coated in the shade ‘Blue Grey’, with the body of the lockers powder coated in ‘Ice’.The project was finished with Cam Locks which is an effective lock option for schools as it keeps personal belongings secure. Additionally, it can come with a master key option too.It was great working with Bowmer and Kirkland Ltd on this project! Get in touch today if you have a similar project, or if you want more information about your school lockers. Give us a call at 01284 530 427.

When Financial IT Consultancy firm PHI Partners took possession of two run-down offices in Barnet, Hertfordshire, they tasked Interior Property Solutions (IPS) with combining the units to create a luxurious, bright and inviting executive workspace and 'Engine Room’ sales office fit for a cutting edge business.IPS wanted to create a bold impact with their door designs and choose floor to ceiling wood veneer doors, door frames and timber-framed partitions from Forza Doors.To create a unified consent look throughout the suites crown cut Black American Walnut veneer was selected for its close match to the grain of the table and AV unit in the executive meeting room. To ensure the veneers matched, Forza was sent a sample of the desk veneer and personally selected the veneer to match. We also used the same veneer on the doorframes and the Forza Imola partitions for continuity of colour and grain.

A ‘whole door system’ which combines secure locking with failsafe emergency evacuation features has been introduced by GEZE UK to meet the rigorous PAS 24 standard.The Slimdrive SL NT PAS 24 System achieves outstanding security – one of the best on the market, whilst still meeting ever-greater demands of building requirements.The system enables 24-hour access control and has been designed and tested for continuous use. With GEZE’s unique, robust locking system that is hidden from view – the Slimdrive SL NT PAS 24 System makes it even harder for opportunist burglars to identify points of access.GEZE’s proven Slimdrive SL NT technology, together with the enhanced security testing required to achieve PAS 24 accreditation, adds up to the perfect entrance system with no compromises - security, accessibility, access control and great aesthetics.The system enables 24-hour access control and has been designed and tested for continuous use. With GEZE’s unique, robust locking system that is hidden from view – the Slimdrive SL NT PAS 24 System makes it even harder for opportunist burglars to identify points of access.GEZE’s proven Slimdrive SL NT technology, together with the enhanced security testing required to achieve PAS 24 accreditation, adds up to the perfect entrance system with no compromises - security, accessibility, access control and great aesthetics.Under PAS 24 a series of tests are performed including manual attack, in which the test engineer uses a range of tools anywhere on the door over a 15-minute period, impact testing of both ‘soft body’ and ‘hard body’ objects, and force testing in which loads are applied for up to 5 minutes. The door must withstand all of the tests to pass and achieve PAS 24 certification.These security enhancements are fast becoming key features for buildings where security with escape routes are a high priority: such as hospitals, airports, train stations and banks.The system uses GEZE’s proven Slimdrive SL NT automatic sliding operator. At just seven centimetres it is the slimmest on the market enabling it to be almost invisibly integrated into the façade. It can move leaf weights up to 125kg and is virtually silent in operation. GEZE UK worked with Jack Aluminium Systems, one of the UK’s leading aluminium glazing systems companies, to develop the new system for automatic sliding doors.The PAS (Product Assessment Specification) 24 test standard was introduced by the British Standard Institute (BSI) in collaboration with industry stakeholders and Secured By Design (SBD). A 2016 revision incorporated additional doorset and window types including non-domestic ranges and changes to some test methods and criteria.

Gerico France designs, manufactures and installs bulk solid storage and handling equipment. It offers bucket elevators, conveyors, pipes, silos, warehouses, milling machines, feed producing equipment, heat treatment devices, and accessories.Project/doors: 21 Speedor Storm High Speed DoorsThe challenge Gerico France delivered a turn-key flour mill project in Mombasa, Kenya for a Grain milling company at their state of the art milling plant. They required a solution to stop dust going out of the building instead of being aspirated by the installed system when emptying grain trucks into the wheat grain intake pit.The solutionHart installed three Speedor Storm doors from 4m wide x 5m high to 7m high. The Speedor Storm is the next generation of large external door which has improved wind resistance on both sides of the door and is suitable for larger openings, greater than 6m. This door does not require separate wind bars as the curtain contains wind bracing every 1m and is held securely into the guide channels with rollers at either side. The success Hart Doors sent an experienced engineer to Mombasa to supervise and assist in the installation and commissioning of the doors along with the training of staff to install future orders. 18 more Speedor Storms were ordered for a specialised dry bulk discharge and handling terminal for grain imports, located in Shimanzi, Mombasa.

This fine house was built in the 1920s, one of its features was the unusual ‘chequerboard’ black and white design of the original windows. The clients wished to replicate this, which required selected opening windows to be powder coated in black so as to contrast against the white outer frames. A magnificent 24-pane bay window is a prime feature of the house and shows off this unique design. The clients chose windows from Clement’s EB24 range with rectangular leaded lights. To provide added security, all the windows and doors were fitted with Clement’s multi point locking system.

Occupying an elevated position above the city of Guildford stands this wonderful house, which was built in the early 1900s. Individually designed and constructed to a very high specification, the numerous windows and doors (over three floors) allowed plenty of light to flood into the property and to take advantage of the fantastic surrounding views. Windows from Clement’s EB24 system with rectangular leaded lights were used to replicate the original fenestration. As well as the new windows being in keeping with the character of the property, the multi point locking system chosen by the client brought extra security.

A landmark in the regeneration of Spitalfields,The Steward Building is situated within the historically and architecturally interesting Artillery Passage Conservation Area.The site required the highest quality stainless steel louvre as a street front cladding, providing ventilation and visual screening, on two elevations of a prime office development.The design, which was developed by Lang+Fulton, featured recessed supports for the panels and incorporated a sliding door with concealed gate hardware to achieve a seamless aesthetic.The louvred panels were made from DeltaBox/SS-90 a pressure locked stainless steel product.

Better Gym, North Greenwich, is one of London’s most technologically advanced gyms. The moment you walk through the doors, your Technogym MyWellness Key will provide access to the facility, equipment and of course the Prospec lockers. Working to the exacting specification of Bignell Shacklady Ewing, the Cabrillant 600 cubicles and glass lockers in a purple and white colour scheme creates a feel of modern opulence. The OTS locking system provided operates on Mifare 1k technology which is compatible with the RFID of the Technogym MyWellness Key, allowing the user to gain access to all the facility has to offer.