"pipes including cladding lagging"

Accoya cladding was selected by contractor Jephsons for the new KFC restaurant in Stourbridge. Along with a new Costa and McDonalds, the £5million development is the latest venture by Guernsey-based Jumbuk Ltd. After performing well with respect to stability and retained aesthetics on a KFC concept design store over the past 18 months, Accoya was chosen for the project. Finished in a Sansin coating this Accoya cladding also offers a stunning aesthetic appearance. For this project Accoya was distributed by James Latham and installed by Protec Roofing.

Aluminium and real timber claddingThe best aluminium cladding for your private home, extension, renovation is Technowood ® cladding. It is faster than most cladding systems to install and has been available for almost 30 years. Tried, tested, analyzed and put through its paces in some of the toughest weather locations Technowood has proved itself a worthy product.How does Timber cladding weatherThere are many solid timbers used as conventional cladding, the main complaint being that the weathering is inconsistent. The colours fade at different rates which may look unsightly.UV light damages wood because it breaks down the wood’s lignin. Lignin is a component of wood that strengthens the cell walls and holds the fibres together. This process is called photo-oxidation.Technowood doesn’t suffer in the same way. This is because the manufacturing process of the veneer and the resins used to replace the lignin; thus negating the short comings of normal timber.You can’t really stop natural timber from weathering. However, with Technowood you can be assured of consistency.How to avoid water staining on claddingAvoiding water stains on timber cladding is something of a myth. Unless you maintain your cladding almost weekly there will always be indications of water staining. It is a product exposed to the elements and as such will be at least damp for most of the year; therefore will show water staining.Completed in 2012 this project is in Samsun, turkey. Receives full exposure from the sun and heavy rain (don’t think it doesn’t rain in Turkey as it does, it snows too). This project called for Technowood because it would keep the natural colour of the timber for much longer compared to normal timber cladding.Can normal timber cladding be warrantied?Under normal circumstances, you can’t warranty normal timber; unless it has gone through pressure treating or surface treatment that has such a warranty. These warranties are not ambiguous so long as the treatment process is followed to the letter of instruction.“The warranty for Technowood products is 20 years”.Salt Spray TestingSalt spray testing, a practice of checking the corrosion resistance of the surface of materials that have a coating. During salt spray testing, an accelerated corrosive attack is produced in order to measure the performance. This demonstrates how well the coating protects the metal. “Salt spray test has been done to our veneered material by IFT Rosenheim Germany and its succeeded.” Technowood aluminium and timber veneer claddingThe products available from Technowood are in standard width dimensions from 100mm, 150mm and 200mm. They look like real wood because it’s a real wood veneer. The product has very little to no maintenance; It also carries Fire Rating A2. This is perfect to future proof your propertyWe have a showroom in Sky House Design centre where you may visit for free samples, brochures and consultation.

Accoya was chosen for this external application as it met all of the stability and durability requirements for the projects cladding. Accoya was also selected because it is ideal for coating. The colour was achieved using two coatings; Woca external tinted Primer and Woca external oil Anthracite. The cladding was achieved by using three different cover-width boards (119 mm cover, 69 mm cover and 49mm cover) which were all 19 mm thick, these were then attached using a secret fix application with stainless steel screws.

We are able to manufacture engineered wood stair units to match our flooring with the same colour and finish.The stair units include the tread and riser and can be made to exact sizes if we have detailed drawings. This means installation costs will be less. These stair cladding units can be fully bonded to old stairs, concrete stairs or Steel stair structures.The cost of these stair units are considerably more than our standard stair nosings and a deposit will be required before production because they will be to your specification. Lead times are around 12 weeks.

Accoya was selected as the ideal material to clad this Burleigh Brewery project in Australia. Burleigh Brewing began on 1 July 2006 and immediately set about pioneering the craft beer movement on the Gold Coast. Distributed by Britton Timbers, Accoya was chosen because the project called for a low maintenance, sustainable external cladding with a high-end appearance. Accoya was also ideal due to its natural blonde aesthetic, which was carefully selected to ensure the Brewery logo was as prominent and distinctive as possible. Roughly 4 m3 of Accoya was used with an Integrain coating.

Accoya was selected for the black coated weatherboards on the front of the house, due to its durability & stability benefits. Because of Accoya’s modification technique it's the ideal wood for cladding. Generally, problems occur with darker coatings on cladding, due to shrink & swell being exasperated by the solar gain. But, Accoya wood’s superior dimensional stability negates this problem & there's very little maintenance. The cladding needed to be aesthetically pleasing as well as highly durable in order to withstand the extreme climates in NZ. Accoya was also chosen due to its rot resistant & insect deterring benefits.

Metalseal 20 was specified to re-brand a small industrial estate in Swindon. Roofs and external cladding were all stripped of existing finishes using vapour blasting. Cut edge corrosion was treated using SWT Primer and all metal surfaces were coated with BBA Approved Metalseal 20 roof & cladding coating. The finish is now graffiti proof, with any graffiti simply washing off with water, with no ghosting residue. The project is covered by the unique Liquasil latent defects insurance guarantee (including cover for professional design).

Project: Manufacture and installation of bespoke 3D GRC cladding panels in Tempest Grey colour and Silk finish Client: Morgan Lovell Materials used: Panels were produced using BTX GRC high performance concrete in 3 meter length and only 20mm thickness. Bespoke 3D BTX GRC high performance concrete cladding panels were installed by Living Concrete to the famous 10 Old Bailey entrance. The panels were 3 meters in length each but only 20mm thick. Panels were double fixed to a steel frame and sealed in a Silk finish.

Architect: Broadway MalyanContractor: BAM ConstructionStone: YorkstoneThe £28M new Broadway Malyan designed Bradford Royal Infirmary Children’s Ward has now been officially opened by HRH The Princess Royal.The new wing, part of Bradford Teaching Hospitals NHS Foundation Trust, was recognised with the top honour at the Local Authority Building Control awards for West Yorkshire at Wakefield Unity Works. The Children’s ward is clad in Aztec Rainscreen with a façade of our local Yorkstone.Aztec was chosen because of its similarity to other local buildings and for its speed of installation. Bam, having used the system before were confident of Stone Cladding Systems ability to deliver a quality system on time. 

CUPA PIZARRAS has been heavily involved in the development of a new self-build residential property in North West London. The manufacturer was initially approached due to its range of natural slate façade designs, with its CUPACLAD 201 Vanguard system eventually specified to create an impressive and striking façade. Located in Dollis Hill, the property is situated next to a housing estate and opposite an existing slate clad facade, while views to the rear give the illusion of a peaceful woodland setting. The designers sought to create a family home with a high-end exterior finish that felt like an escape from London, while also working well with the surrounding structures. Early on, natural slate was identified as a material that could help to create an attractive contemporary façade around the rear, sides and the upper elevation of the front of the property. It was also crucial that the façade would act as a rainscreen cladding system so the project team approached CUPA PIZARRAS about its CUPACLAD natural slate rainscreen cladding. The project team visited Taylor Maxwell’s London Bridge showroom – the exclusive distributor of CUPACLAD in the UK - to discuss options with the Taylor Maxwell and CUPA PIZARRAS teams as well as view a CUPACLAD sample wall. This session helped to establish that the CUPACLAD 201 Vanguard system was the ideal solution. A fully BBA approved system, CUPACLAD 201 Vanguard is 100% non-combustible and offers a lifespan of over 100 years. Following the initial consultation, CUPA PIZARRAS worked closely with the project team, including carrying out a number of site visits. The use of CUPACLAD 201 Vanguard was kept in mind throughout the design process, with the dimensions of the slate determining the placement of windows, vents and corners. This meant that when it came to construction, it was a simple installation process with minimal wastage and resulting in a clean finish. The CUPACLAD 201 Vanguard system is constructed from horizontal aluminium profiles, mechanically fastened to an aluminium sub frame support. Once fixed in place, the rows of natural slate are clipped on, and in the case of the Dollis Hill property, using visible fixings to create an attractive pinstripe effect. “The product looks fantastic in-situ on this project,” commented Tom Ward, Cladding Product Advisor at Taylor Maxwell. “The dark grey slate rainscreen cladding provides a striking colour contrast with the refurbished light brown timber fencing and complements the property’s black aluminium windows and glazing.” “Natural slate is a great cladding product. Not only is it easy to install, but, as it’s natural, you don’t have to handle cost sheets for working with a dangerous material,” commented Ronan Glynn, developer at Talina Builders. “We carry out a lot of demolition and see a lot of old building products go to waste; so it’s also reassuring that slate offers such longevity and when it might eventually be sent to landfill, you know it will not harm the environment.” David Cooke, Business Development Manager at CUPA PIZARRAS concluded: “On a project like this we can be involved as much, or as little, as the project team demands. We can offer support from conception to completion and we always encourage architects and contractors to get in touch as early as possible, so like in the case of Dollis Hill, we can work closely to ensure a meticulous finish.” For more information about CUPA PIZARRAS range of products, including its CUPACLAD rainscreen cladding systems, please visit: https://www.cupapizarras.com/uk/rainscreen-cladding/

Fire Retardant aluminium cladding that looks like real timber. This system of real timber that wraps aluminium cladding has been around for 30 years; its not a new phenomenon, in some practices, it’s the norm.Exceptional Architecture with contrasting aluminium wood cladding against a striking white stucco facade. Incredible detailing and accurate installation has made this private residence an iconic statement. Real timber veneer over aluminium results in a contemporary timber cladding, its not an effect, its not plastic… its timber.Aluminium cladding that looks like real timber.Set over three floors and a basement, beautiful landscaped surrounds and many balcony terraces make this dwelling the envy of other property owners. The cladding by Technowood ® has been used to good effect for the wall cladding, soffit board arrangement and also the fascias. This system has many options for start and stop beads with alternatives for reveals and corner detail. The design of these projects is only limited by the designer.Pergola design and Brise Soleilby Technowood®As Technowood have been manufacturing since the 1980’s they are well versed in many different profiles and systems in aluminium covered in real wood. Pergolas that span with a clear run up to 12.5 metres, louvres and Brise Soleil that match. We can create a complete system in timber that looks the same, made at the same time by the same hands… the design can also incorporate powder coated or anodized aluminium elements; supplied at the same time. These are also made in the same manufacturing process.Cladding illumination Up lighting, down lighting or washing warm white illumination across the facade of cladding looks beautiful. Further, this offers a welcome from the building during the darker hours, makes your home more inviting, it also looks stylish. It’s a simple effect to achieve and doesn’t cost a lot in comparison to other illuminated elements of the project.Technowood aluminium timber claddingThe simple system is an inclusive platform of cladding. It starts with a simple L shape bracket, a long length of supporting section T shape (like a timber batten); the cladding directly fixes to it. Think rain screen, when you are designing and you won’t go far wrong. Technowood has been here for 30 years and it’s here to stay. Certified FR A2, FSC and certified for Environmental Product Declaration, its also warranted for 20 years.

Lazise, a picturesque town on the eastern shore of Lake Garda, has become one of Italy's most popular tourist destinations, loved by both Italian and foreign visitors.The landscape from the villa is very impressive, the magnificent view of the lake and its crystal-clear waters are perfect for a weekend of escape and relaxation. Fishing boats can be seen on the water, picturesque cafes line the shores of the lake and frequent festivals enliven streets and parks with colourful kiosks.Villa Collivo is situated in the town. It is a modern green building designed to offer comfort for tourists, boasting a large garden and a swimming pool, overlooking the lake and an estate planted with vines and olive trees. The first floor has five large independent suites for residents and each suite has underfloor heating and air conditioning.The architect of the interior design of Villa Collivo was Francesca Rapisarda and it is characterised by the skilful use of colours which give each room a unique and distinctive atmosphere.The furnishings are composed of modern and contemporary pieces and offer an elegant and bright environment.ECLISSE sliding pocket doors and Syntesis flush hinged doors have been installed in the apartments to effortlessly connect rooms to one another. The pocket doors make it possible to make the most of the available space, especially in the corridors, creating a sense of spaciousness and fluidity.The minimalist design of the flush-to-wall Syntesis doors adds a touch of modernity and elegance to the rooms. Thanks to the absence of any frame and exterior finish the doors help to create a clean and refined look to the entire project.  

Architect: Allan Murray AssociatesMain Contractor: Cruden Home (East) Ltd.Installer: MetalTech Roofing and Cladding limitedAllan Murray Architects were the master planners and principal architects for the £150 million transformation of the former Caltongate area in the Old Town in Edinburgh. The site links Waverley Station with the historic Royal Mile, Covering approximately 7 acres this new urban centre mixes open spaces with retailers, restaurants, hotels and new homes and offices in this important area of the Edinburgh. Peakmoor was the stone of choice as it has a long history in the City.The project presents a major new Aztec rainscreen facade in the Peakmoor sandstone with balconies and a fully glazed iconic feature tower. A truly wonderful building with flexibility; lightweight, A1 non-combustible Aztec Natural Stone Cladding.

" We are thrilled that Accoya was specified for the exterior cladding for Birmingham’s new Starbucks drive thru. Working with Vincent Timber, specialists in cladding, and Accoya has enabled the project to be designed and supplied without problems. By specifying Accoya wood there is no compromise on performance and sustainability, which is key to the Starbucks’ 2030 commitment. This project represents one of many Starbucks projects clad with Accoya in the UK and overseas. As a sustainable company ourselves we are delighted Accoya is part of the future development of their stores and hope to see more stores clad with Accoya in the future.” - Laura Keily @ Accsys Technologies PLCFor full case study, please click on the view more link above.

A residential home in Enfield, London, was extended out the back of the property and charred Accoya wood was the chosen material for the cladding. Innovative architects, Studio Hatcham, specified charred Accoya wood to make the extension distinguishable yet sensitive, enhancing the existing grey brickwork, rather than overshadowing it. The Accoya was treated using a charring technique, taking the wood from its originally light colour to a darker, burnt effect. The cladding was charred in three varying shades, creating depth to the extension; light brush “Shizen”, Graphite “Seizo” and Anthracite “Gen no”. For the posts, a deep black effect was chosen to define and accentuate, in particular, the large glass opening of the extension into the back garden. Despite charring the wood, Accoya remains durable and stable with a 50-year warranty against rot. This alongside its great sustainability credentials, made it the perfect choice for this extension.

Located in Fort William in the Scottish Highlands, Blar Mor comprises 117 one-to-four-bedroom affordable homes, which have been built by TSL Contractors. The main contractor partnered with AFS (Scotland) to deliver a durable cladding system for timber frame homes, removing the requirement for traditional construction.

International Timber recently teamed up with Snowdrop Developments to supply Siberian Larch Cladding to a contemporary house, named the Rock Lobster.

The extensive use of wood cladding & decking were key elements of LSI architects’ design. However, given that ‘The Haven’ is in a flood zone, surrounded on three sides by water & constantly exposed to a high moisture content in the air, LSI needed to find a wood that they could be confident would deliver durability, dimensional stability & aesthetics. The glue laminated Accoya wood for the curved rear screen was manufactured by Newnham & Abel Ltd & hand finished with a protective merbau-coloured coating from WoodGuard by Guard Industrie. The same finish was factory applied to the cladding.

Project: Manufacture and installation of external GAP cladding panels using hidden fixings and chemical anchoring. Client: Stuart Forbes Associates Materials used: Bespoke size external GRC cladding panels in Rough Mist finish, treated with hydrophobic agent and clear sealant. This exciting new refurbishment project of a private house in Wimbledon, London brought with it plenty of manufacturing and installation challenges! The designers’ vision called for 2m x 1.2m large format GAP panels with mitred edges to be seamlessly wrapped around the building. The panels had to be millimetre perfect to avoid any cutting on site.

The stunning state-of-the-art, multi-level, Better New Addington Leisure & Community Centre, designed by GT3 Architects for the London Borough of Croydon features buff brick cladding with 3D- textured detailing thanks to external cladding supplier Aquarian Cladding Systems.The project was part of the Southern Construction Framework and followed a string of work carried out by Willmott Dixon for the Borough. It was also home to the building contractor’s first Building Lives Academy, aimed at upskilling young people in the area and providing them with an opportunity to join the construction industry.Originally, another brick cladding system was specified for use, however due to the complexity of the stepped window frame detailing, the additional cladding support rail cost, the time it would take to install, and a lack of product warranty from the supplier, an alternative cladding system was sought to meet the programme and budget.To resolve the challenge, Aquarian and specialist cladding contractor Express Dry Lining, part of Aquarian’s Approved Installer Network, worked closely together to achieve an acceptable finish to match the specified material, which suited the local vernacular thus meeting the aesthetic, programme, and commercial requirements.Peter Head, Director of Express Dry Lining said: “The design and installation support of Aquarian helped us ensure that all stakeholders were supported throughout the process of material selection, buildability, component production and assembly to achieve a photogenic building free of defects which will last. This is one of those projects to be proud of for a very long time.” In addition, the solution had to be a cladding system that used brick slips which could also be produced as standard bricks to build landscaping planters and achieve a seamless ‘hit-and-miss’ brick feature in the façade. As an innovative, panelised, insulating brick cladding system, which has been successfully tested to BS8414 on five separate occasions and has an EN13501 fire rating of B, s1, d0, Gebrik was perfect, with Aquarian supplying 1126m2 to the project.To achieve the 3D features in accordance with the architect’s design brief, eighteen different panel and corner components were produced, 25% of which were bespoke and therefore project-specific.The expertise of Express Dry Lining in the setting out of the substrate ensured the 60mm thick ‘brick wallpaper’ is consistent across the entire façade with perp joint alignment across both the stretcher and stack bond panels. And their attention to detail in ensuring the system was cleaned down after pointing ensured the façade was completed on time and to everyone’s satisfaction. The finished project was completed six weeks ahead of the revised programme with Gebrik significantly contributing to the speed of construction and reduction in programme, leading to significant cost benefits elsewhere. The London Borough of Croydon is delighted with the quality of the completed building, with Councillor Oliver Lewis, cabinet member for culture, leisure, and sport, quoted as saying, “This is a stunning new centre with first-class facilities for everyone in New Addington to enjoy and be proud of.” Peter Head concluded by saying, “It is unlikely any other brick cladding solution could have been used as cost-effectively and efficiently as Gebrik to create a façade of such high quality.”

ABODO Laminated Timber Cladding coated with ABODO Ebony Oil was chosen on this project. Being Thermally modified the Abodo product was supplied in much wider 180mm boards – the thermal modification process not only offers great stability, but also a great species to coat. The FSC Certified ABODO Cladding range offers a renewable alternative to some of the more traditional Larch or Cedar cladding that the construction market are used to.

Did you know Vincent Timber supplied both these clubs with their cladding and louvres?BurnleyBurnley Football Club's aim with this development was to raise the standard of their training facility to meet the Elite Player Performance Plan (EPPP) Category 1 and 2 standard of infrastructure. Together with Barnfield Construction, they achieved just this.To meet the requirements of the EPPP the build included an indoor area, allowing training to continue through all weathers, complete with a small spectator gallery; as well as multiple developments outside, including three full-sized training pitches and a further two three-quarter size pitches.The new centre was then given a unique finish, clad in four pre-coated, custom colours of Vincent Timber's Thermowood.Thermowood is a versatile timber that serves as internal and external cladding, louvres and even works in saunas thanks to its heat resistant properties.Thermowood is produced by changing the cellular structure of the softwood with a heat treatment making the wood more stable. Its durability and sustainability make Thermowood very popular.ArsenalSupplied by Vincent Timber to contractors Richardson Roofing.With the help of Vincent Timber and Richardson Roofing, Arsenal Football Club were able to transform their training ground at London Colney to provide players with the best possible facilities, at every age group of the club.The facility, featuring a new gym, 40m running track, ice baths, cryotherapy chamber and state of the art analysis and scouting suites, will not only be used by the first team players but it will also house 1st and 2nd year professionals at the academy.The beautiful exterior on the training centre is Western Red Cedar cladding. This attractive, durable material is the ideal choice as it is highly resistant to weather while offering superior quality and sustainability.

This development includes large areas of external elevations & soffits cladded in Accoya. Accoya was also used for the Brise Soleil canopy detailing on the drive-through lane & the double height curtain walling pictured on the front elevations. For this natural aesthetic the pre-finished Accoya profiles were given one (natural plus-ctec) base coat & three top (sansin translucent) coats. As one of the most durable products on the market, Accoya is the ideal material for projects such as this. Accoya is 75% less likely to shrink & swell in variable weather, allowing it to retain its structural integrity.

2021 sees Rolls Royce unveil Testbed 80, the world’s largest & smartest indoor aerospace testbed, as part of a £90million investment. It has been a hard year for the aerospace industry, with production slowing, and cuts in jobs, however this ground breaking facility shows Rolls Royce’s confidence in the future of aerospace for decades to come.HAG Ltd. have proudly worked alongside Buckingham Group to assist in this ground breaking facility that will not only test propulsion systems of the future, but also secure jobs in Derby, UK for many years to come.HAG Ltd. were tasked with designing & manufacturing a roller shutter for this distinctive & state of the art facility, to enable Rolls Royce to test the largest, smartest and most powerful engines in the world by MDS Aero Support Corporation of Ottawa, Canada.HAG Ltd. designed, manufactured and installed 2 Armourguard F1 insulated roller shutters that were 7.5m by 15m. The F1 model is a high quality insulated security shutters delivering the highest level of security and offering thermal protection. A composite of foam filled sections is encased in a flat double skinned interlocking galvanised steel lath.The project:£90million project3 years of construction7,000 square metres, the same size as a Premier league football groundHouses the world’s largest exhaust pipeContains 3,218 tonnes of steelAnd 27,000 metres3 of concreteEquipped with a 40,000 litre fuel tankCapable of testing engines on Sustainable Aviation FuelThe most capable & complex testbed ever designed & builtWarren East, Chief Executive, Rolls-Royce, said: “Testbed 80 is the largest facility of its type in the world. However, it is not only big, it is also smart and features the most advanced testing technology we have ever used. As the new global hub of our testing capability, it will support the next stage of our UltraFan programme as we begin ground testing the first demonstrator in 2022. This incredible piece of infrastructure is a very visible sign of our commitment to this site and secures the future of Derby as the home of large engine development, continuing a history that began in the late 1960s with the RB211.”HAG Ltd. are proud to be part of this monumental development in the aviation industry.

One of the most talked about subjects in timber cladding are the Vertical Fins.Solid timber or even huge steel forms are cumbersome, heavy and expensive. They often require specialist structural fixings and tame consuming to install.Technowood fins have been created to transform this arena. Simple in design, ultra-light weight and easy to install, saving on materials and labour for large scale commercial projects. In the main they are fabricated in Aluminium and if the spans are excessive they can be manufactured in GRP. All Technowood finishes are real timber…Vertical Fins, which uses Technowood products in facade design, attracts attention with its impressive architecture.There are multiple options for cladding and facade design within the world of Technowood. Interspersed vertical forms with spaces between or even panels of cladding… all manufactured under one roof and delivered to site at the same time, same batch, same material, same colour, same texture all with the same impressive result.Technwood have a showroom in Sky House Design Centre in Amersham, quick access from the Metro line. They also offer CPD presentation during the week direct to your practice… samples and product brochures all also available. Architect: Gokhan Aksoy Architects in collaboration with AS ArchitectsLocation:Private residenceProductTechnowood Fins, Cladding and PanelingCompletion:2016

The Crouch End Picturehouse in North London is an interesting example of how Kalwall® can be used to convert an ugly 1950’s concrete building into a state-of-the-art space suitable for the 21st Century.  •   This project by Panter Hudspith Architects forms part of a wider initiative within the London suburb of Haringey aiming to re-establish the area as one of London’s cultural and arts centres. The result is a remarkable transformation of a building, originally a factory then an office, into a £4.5 million cinema complete with café, bar, restaurant and community rooms.  •   The unique style of this four-screen cinema has attracted much interest, not only because of the dramatic transformation but also because of its new external elevation. •   The use of Kalwall, coupled with other sustainable measures including solar panels and a green wall, means the picturehouse has achieved a BREEAM rating of Very Good. The Solution Panter Hudspith Architects replaced the original curtain wall and specified Kalwall® for the front elevation. Unusually, this unique translucent cladding is fitted with a tight 150mm wide grid, known as Verti-Kal™, which not only serves to emphasise height but is the first of its type in the UK. On this scheme the Kalwall panels also insulate to 0.78 w/m2 making the building eye-catching and sustainable. Unlike conventional glazing, Kalwall eliminates shadows and glare and the stark contrasts of light and shade. The system also enhances simplicity by eliminating the need for blinds, curtains or solar control. Even on cloudy days, the interior is bathed with natural daylight, which means less artificial lighting and, because Kalwall is highly insulating, energy costs are reduced. Kalwall is increasingly being used in the UK for new buildings and also for the refurbishment of cladding or rooflights on aged buildings. One of the main attractions of specifying Kalwall is its unique effect on both the interior and exterior. Although translucent, it offers the big advantage of privacy while the elevations appear crisp and simple. When illuminated at night they emit an inviting ethereal glow.  The CommentsArchitect James Jeremiah comments, “This is the first time we’ve specified Kalwall and it fulfils our vision of retaining the modernist characteristics of the building. One of our original concepts for the building was of a zoetrope (one of the earliest forms of moving image) and there’s a strong history of using transparency in films with people moving behind the shadows. We felt the Kalwall system was a very good fit for what we wanted to achieve”. Amanda Birch, Technical Editor Building Design writes, “To appreciate fully the building’s transformation, it is best viewed from the street. The concrete structure has been retained along with its striking line of concrete columns, which are now a strong feature of the front elevation. The original coloured insulated glass panelled system has been replaced at first and second floor levels with Kalwall’s 75mm thick insulated cladding system creating a dynamic façade that is particularly effective at night.

Architect: EMAStone: Bela SandstoneThis impressive new residential development consisting of 34 apartments is clad in Aztec Rainscreen façade finished in Bela Sandstone. This buff/blonde sandstone is a perfect match for the historical City of Glasgow and the surrounding Victorian tenements It follows on from the earlier use of this durable stone in North Street. Completed in 2018 and designed by KFK Design, Atrium Gardens is a new-build property with the rainscreen installed by Roof & Façade Systems and boasting its own refined, sleek and contemporary finish.

Accoya was selected as the ideal material to clad the new Performing Arts Centre for Pipers Corner School, High Wycombe. Over 1200 m2 of Accoya cladding, soffits and trims were used throughout the project for phase 1 of the build. Designed by Nichols Brown Webber Architects and Landscape Planners, Accoya was chosen due to its Class 1 durability and low maintenance upkeep. Accoya was also used due to its sustainability credentials as the building has been targeted to achieve a BREEAM ‘very good’ rating.

A fast paced commercial project for Welcome Break motorway services at Newark. A2-s1,d0 fire rating was mandatory here, yet the design intent was to use wooden cladding to make the building pop from far away. Contemporary design with traditional materials are trending now, but often the strict fire regulations rule out materials that would be preferred. Technowood UK was able to supply a real wood veneered aluminium cladding that is compliant with all the regulations, and PSBK Limited was able to complete this installation in just 3 weeks.

A newly built student accommodation block in Liverpool features an attractive, colourful external finish, thanks to Cembrit’s Cembonit cladding boards.Plato House is a purpose built student development comprising 86 spacious student rooms complete with a kitchen, en-suite bathrooms and high speed Wi-Fi throughout. Supplied via Vivalda of Manchester, Pemberton-based cladding contractor, Bak Cladding Solutions installed approximately 1000m2 of Cembonit cladding in a combination of Tufa, Pearl and Sand colours.

With beautiful views of the Belvoir Valley, the client wanted a contemporary architectural piece that would integrate comfortably with its surrounding landscape whilst maintaining a natural yet modern 21st century aesthetic.Sustainability was at the forefront of the client’s brief, who wanted a recycled material for the external cladding that would accommodate the robust, maintenance-free and high quality requirements of the build. With the sensitive and vast wildlife of its surrounding landscape in mind, the property needed to be natural, both in terms of its aesthetic and its components, embodying an effective fusion of sustainability and simplicity.The SolutionBuilt to embrace the panoramic views, this two-floored structure is fuelled by the natural light of its landscape with its beautiful vast windows and balconies. Our stone Pioneer cladding was chosen to accompany this natural appeal, enhancing the contemporary simplicity that the client desired. Installed alongside our edging, fascia and fasteners, we supplied the complete system for the cladded sections of this striking exterior, suiting the sustainable prerequisites of the project as well as the contemporary visual requirements.Using clean lines and sophisticated lighting, this building is both articulate and elegant, conveying an elevated piece of architecture that both stands out and blends in. Having won 2019 RIBA House of the Year, we are proud to have contributed to this stunning project.Customer Feedback“We decided to use EnviroBuild on the Belvoir Vue project because we liked the product in aesthetic terms but were also looking for a product that would perform with stability and durability. From the outset, the project was intended to be sustainable and, once again, the product was a perfect choice.”Project DetailsSize: 116 m²Product: Stone Hyperion Composite Cladding (The same finish can be achieved using our Sentinel Class B fire rated composite cladding)Client:  From Residential Architect: CBP Architects Location: Vale of Belvoir, Granby

After extensive consultation with all involved, the design they created to achieve this involved an eye-catching arrangement of Russwood’s factory-coated Accoya cladding. Edd Rushton, the architect in charge of the project said, “Painted Accoya profiles provided a durable and cost-effective way of bringing new life to a tired 1970’s façade and creating a vibrant new public face for the school. Russwood supplied pre-coated Accoya cladding panels, as well as thicker profiles used in the louvred sun-screen, and offered specification and detailing advice throughout the project.”

A successful refurbishment of a disused building translated into 42 beautiful one and two bedroom apartments. The building ‘Cambridge House’ was enhanced externally by applying cladding and updated glazing. RCM supplied Vitrabond ACM cladding to the project. An additional, unforeseen opportunity also presented itself to RCM whilst working on the project.

The project was part of huge regeneration plans for Thurrock. The new three-storey Civic Centre, designed by LSI Architects, built by Kier Construction (Eastern) and clad by specialist façade contractor A2O Ltd, incorporates a council chamber, café, registrar service, staff offices, committee rooms and service area for the public.LSI Architects selected the MechSlip Brick Cladding System, supplied by Aquarian Cladding Systems, to achieve a non-combustible, through-coloured, textured, real brick façade, which provided sufficient form to ensure a statement building that was not subservient to the surrounding buildings. MechSlip proved vital for the project, which kick-started the Thurrock transformation.

BH2 is a £30m development creating a newly-constructed leisure complex in Bournemouth  •  Originally a two acre NCP car park and bus station, main contractors Vinci has built a new 10 screen Odeon Multiplex cinema, café, casino, restaurant and retail complex.  •  Structura was appointed to design and supply Kalwall translucent facades to enclose the external fire escape routes around the perimeter of the building.  •  Structura installed multiple Kalwall translucent elevations, totalling over 1000m2, providing natural daylight to internal areas by day and a soft ethereal glow which brings the area to life at night.The SolutionPanter Hudspith Architects replaced the original curtain wall and specified Kalwall® for the front elevation. Unusually, this unique translucent cladding is fitted with a tight 150mm wide grid, known as Verti-Kal™, which not only serves to emphasise height but is the first of its type in the UK. On this scheme the Kalwall panels also insulate to 0.78 w/m2 making the building eye-catching and sustainable.Unlike conventional glazing, Kalwall eliminates shadows and glare and the stark contrasts of light and shade. The system also enhances simplicity by eliminating the need for blinds, curtains or solar control. Even on cloudy days, the interior is bathed with natural daylight, which means less artificial lighting and, because Kalwall is highly insulating, energy costs are reduced.Kalwall is increasingly being used in the UK for new buildings and also for the refurbishment of cladding or rooflights on aged buildings. One of the main attractions of specifying Kalwall is its unique effect on both the interior and exterior. Although translucent, it offers the big advantage of privacy while the elevations appear crisp and simple. When illuminated at night they emit an inviting ethereal glow.The CommentsArchitect James Jeremiah comments, “This is the first time we’ve specified Kalwall and it fulfils our vision of retaining the modernist characteristics of the building. One of our original concepts for the building was of a zoetrope (one of the earliest forms of moving image) and there’s a strong history of using transparency in films with people moving behind the shadows. We felt the Kalwall system was a very good fit for what we wanted to achieve”.Amanda Birch, Technical Editor Building Design writes, “To appreciate fully the building’s transformation, it is best viewed from the street. The concrete structure has been retained along with its striking line of concrete columns, which are now a strong feature of the front elevation. The original coloured insulated glass panelled system has been replaced at first and second floor levels with Kalwall’s 75mm thick insulated cladding system creating a dynamic façade that is particularly effective at night.

Siberian Larch with NORclad Lite Presevative Treatment All of the external cladding, and fins for the state-of-the-art facility, along with balustrade and handrail components, the same Siberian Larch then runs into the main reception of the building Utilising an certified NORclad® Siberian Larch, the specification includes our NORclad Lite Preservative treatment applied to the timber. The preservative treatment provides a formal warranty on the product for 30 years against rot and fungal decay (out of ground contact). Products specified, Treatment Services applied under ISO 9001 factory controlled conditions.