"glass"

An award-winning, luxury home in the beautiful Hampshire countryside, 4 Views is designed to make the most of its location, also makes its own bold statement thanks to an imaginative combination of materials, including lass, timber and bricks created by the innovation-led, manufacturer, Vandersanden. A remarkable new build with a distinctive architectural design from Winchester-based firm, AR Design Studio, 4 Views incorporates Dark Vandersanden Morvan brickwork which creates tonal contrast with cedar cladding and floor to ceiling glass doors and windows to set this home apart, giving it a balanced, calm identity, at one with the landscape.To find out more about the bricks used in this project or to see the wide range of high-quality bricks available from Vandersanden, click on the 'View more' link 

The unique and stunning curved blue glass cladding specified for the new hospital posed several design challenges. The insulation used needed to provide high thermal performance, be able to conform the curved surface and be completely non-combustible since the building is in excess of 18m. SuperFOIL Insulation was approached to provide replacement insulation that would meet all fire safety standards and which could be applied without requiring changes to the exterior or interior design of the building. After careful consideration as to what would be the most suitable solution, we supplied 5,500m² of our non-combustible SFNC insulation. SuperFOIL SFNC is the only insulation of its kind to be certified by the Building Research Establishment (BRE) as European Class A1 Non-Combustible, which is the highest possible rating of fire safety.

Falco recently took to the design, manufacture, supply and installation of a bespoke cycle hub based on the traditional FalcoLok-500 design. Installed at Anson House, south Westminster, in view of the River Thames, the new cycle hub has been coupled with the FalcoVert-Pro cycle rack to provide secure accommodate for up to 24 bikes.Installed on behalf of Westminster City Council, the new cycle hub features electrogalvanised perforated sheet cladding, powder coated in a Jet Black RAL colour, along with a secure access system.The whole shelter is a bespoke contemporary design of the classic FalcoLok-500 shelter, which features clean lines through the glass cladding and supported by stainless steel glass clamps. The steelwork is hot dip galvanised to BS EN ISO 1461 and also meets UK structural design laws with EN 1090 accreditation. Rainwater is collected via innovative integral gutters as part of the roof system and a bespoke bund ensure that the cycle hub is weather proof!The cycle hub was commisioned to help reduce congestion and provide greater cycling accessibility for residents of Anson House.The FalcoVert-Pro as shown here at Anson House, is a space saving cycle rack design ideal for highly popular densities such as stations, cycle hubs, shopping centres, high streets and car parks etc. Bicycles are parked semi vertically with both front and rear wheels located in a custom designed trough.Falco cycle hubs can also incorporate a world of features including; smart LED lighting, green sedum roofs, CCTV and Help Point facilities as well as numerous other cost-effective features for the cyclist such as lock holders, helmet lockers, seating and bike repair facilities. For more information about the FalcoHub cycle store, a demonstration of the FalcoSmart app-based lock, the FalcoPod bike hangar or any other Falco product, then please speak to one of our friendly customer service staff on (01538) 380080.

This is the new bespoke cycle hub Falco recently designed, manufactured, supplied and installed this spring for Kenley Station in south Croydon. Making use of the flagship FalcoHub design, the new cycle hub has been fitted with the tried and tested FalcoLevel-Eco two-tier cycle rack, providing commuters with up to 16 secure cycle parking spaces.The bespoke 6.5m x 4.2m cycle hub has been fitted with an electric sliding door, a secure access system, LED lighting, a FalcoFix 2.0 cycle repair station, bespoke branding graphics and a cladding combination of sustainable hardwood slats coupled with powder coated galvanised steel in a ‘Moss Green’ RAL colour.The cycle hub also provides secure accommodation for up to four cargo bikes, e-cargo bikes, adaptive bikes, recumbent bikes, tandems, tricycles, oversized and upright cycles or bike trailers.In addition to the cycle hub, Falco also provided a bespoke solution to store the clients refuse units.Rail passengers using pedal power can apply at the ticket office for a free security fob to gain entrance to the facility now.The images attached show the new cycle hub addition, installed next to platform 2, off Station Road.The whole shelter is a bespoke contemporary design of the classic Falco Cycle Hub shelter, which features clean lines through the glass cladding and supported by stainless steel glass clamps. The steelwork is hot dip galvanised to BS EN ISO 1461 and also meets UK structural design laws with EN 1090 accreditation. Rainwater is collected via innovative integral gutters as part of the roof system and a bespoke bund ensure that the cycle hub is weather proof.For more information regarding the cycle hub scheme at Kenley Station or any other product from our cycle parking and shelter portfolio, please contact our helpful sales team on 01538 380080.

About the projectA stylish and unique ARC™ modular eco-building has been installed at Colchester Hospital after the Clinical Team specified a unit with an eclectic look that offered plenty of space. Now complete, the unit has opened up opportunities for patients to step away from a potentially busy hospital environment at a time in their lives when calmness and relaxation should be reflected in their surroundings. This can help improve the quality of life both for patients and their families.Working closely with KLH Architects, the Green Unit provided an environmentally friendly and highly energy-efficient home for patients requiring palliative care. The striking ARC™ building is certainly an abstract work of art and not one that can be ignored. Natural light has a proven positive effect on both mental and physical well-being, and installing FAKRO roof windows within the unit helps patients and carers stay naturally comfortable and bathed in daylight.What FAKRO products were used?To complement the eco-friendly connection with the natural environment, the unit features two FTP-V P5 roof windows which have been used within a combination structure. P5 is a very popular choice for those who prefer a more insulated option with its triple glazing offering a u-Value of 1.01 W/m²K.Glass construction from outside to inside = 4HS-Tg10Kr-4HT-Tg8Kr-33.2T:• 4mm toughened glass outer pane with an easy maintenance layer• 10mm warm TGI spacer filled with inert Krypton gas• 4mm centre pane which is toughened with a low-emission coating• 8mm Warm TGI spacer filled with inert Krypton gas• 6.2mm internal pane is an anti-burglary class of laminate 33.2 (class P2A, EN 356,1(B)1 wg EN 12600), complete with a low-emission coating

Project: 1 Aylesbury Street, Clerkenwell, London, EC1R 0DRClient: MeritcapeArchitect: Atum Design LabM&E consultant: EngDesignProtecting Cities Against Fire with Advanced GlazingDaylight-flooded spaces command a premium from tenants, but in the densest urban areas – where buildings are very tightly packed – it can be difficult to achieve. Not least because of the need to protect against the spread of fire.This was the challenge for developer Meritcape when they set out to refurbish 1 Aylesbury Street – a converted historic warehouse building in Clerkenwell, East London.The designers wanted to fill every floor of the building with natural light, from both the front and the back of the building by using floor-to-ceiling glazing on every floor. However, the rear of the property was just three metres away from a neighbouring building.To prevent fire spreading from one building to the next, building regulations specify the fire resistance that external walls need to be able to provide. This is given as minimum requirements for integrity – how long they can contain smoke and flames – and insulation, or how long they can prevent the escape of heat. Steve Bond, technical and customer support manager, fire, at Pilkington United Kingdom Limited, said: “When you have two buildings this close together, standard glazing is not an option, as it doesn’t put up enough of a barrier to fire spreading outwards from the building.“That’s where fire-resistant glazing can make a big difference. By providing protection against fire while also letting light flow in, we can create light-filled spaces in very built-up parts of the city where not long ago it wouldn’t have been possible.“As well as sealing in flames and smoke for at least an hour, the glass also provides radiation shielding that reduces the amount of heat energy that can pass outwards through the glass – another key means of spreading fire.” The rear façade of the building is glazed in Pilkington Pyroclear® Plus insulating double-glazed units, delivering not only the right level of fire resistance, but have also been designed to give excellent thermal insulation (U-value) properties to reduce heat-loss from the building.Davood Kiani, Senior Project Consultant at Meritcape said: “Those looking for modern commercial space expect floorplans to be well lit with natural light, and this is one of the main design challenges when working with buildings in the most densely urban areas of the city.“Fire regulations are one of the big reasons for this, so Pilkington fire-resistant glazing means we can achieve the best of both worlds - a building that meets or exceeds all of the safety regulations while also feeling spacious and airy.”A total of 800 m2 of Pilkington glass was used in the project, including in the front façade of the building, in which hundreds custom-sized small double-glazed solar-control units were used to imitate the crittall steel-framed windows that are a signature feature of buildings in the area.Images by S G Photography

Urban development within St. Helier, the capital of Jersey is gathering momentum with URSA seeing its specialist insulation products specified at one of the capital’s newest and most ambitious developments. The largest of the Channel Islands, St. Helier is a lively harbour town and has become one of the UK's most popular tourist attractions, creating a high demand for ongoing residential and commercial development. Both its commercial port and marina, as well as the centre and the main neighborhoods, are undergoing an in-depth study for the renovation of its building stock and the transformation of the urban landscape it offers. The ultimate objective is a profound urban regeneration carried out through the creation of a commercial heart open to the sea, in the city centre, and modern, sustainable and healthy residential developments on the outskirts to ensure the demands of future growth. It also aims to reduce traffic and create a walkable city for pedestrians and cyclists with green spaces and open spaces. In the north of the city is Ann Court, a large development located next to a large municipal park built on the site of a former car park that has been demolished. Being developed by Andium Homes, construction is nearing completion on the development of 165 new homes of different sizes and orientations (with internal and external courtyards), but with a common standard: the energy efficiency and sustainability of the whole complex. To support the sustainable objectives, architects have specified a ventilated façade that guarantees thermal and acoustic comfort, whilst preventing moisture penetration and condensation. A correctly designed ventilated façade system also guarantees a fire safe structure, prolongs the life of the building and enhances its energy efficiency. As part of the specification, 2,400 square meters of 220mm URSA Walltec Black 32 were specified. The choice of material was the direct decision of the architect Stephen Marshall of Axis Mason Architects, who decided on the glass wool slabs after learning about their performance and the knowledge provided by URSA's technical office. URSA Walltec Black 32 is a semi-rigid glass wool slab treated with a water repellent additive. The slabs have a black glass fibre tissue to one side only that helps to hide the insulation in ventilated façades with open joints. It is a non-combustible product that does not contribute to the spread of fire, is water repellent and has high performance to ensure the thermal and acoustic comfort of the entire residential complex. Once the insulating material has been fixed, the façade is completed with the installation of the cladding to create cavity that ensures the properties of the system. This imposing façade enveloping the courtyards of Ann Court facilitates a new building in the north of St. Helier where social interaction, tranquility, quality, comfort and healthiness are guaranteed.  Ian Claydon, URSA UK Technical Manager, said: “We first became involved in this scheme in June 2020. We were approached by the architect for recommendations on correct choice of product and the thermal assessment for the external walls.  “During the early stages of the project, we were in regular contact providing advice on the target U-value in the wall(a commendably low 0.18 W/m2K), as well as the impact on Jersey SAP energy assessment and the technicalities of rainscreen cladding. The team were particularly impressed with the speed of response and our wider technical knowledge, helping to support the perfect specification.” 

The project, designed by Uno-A, welcomes 110 flats in three different types of buildings linked by several planted areas; and various common areas, such as a coworking space and an equipped gym.The façades use GRC (Glassfibre Reinforced Concrete) panels and coloured glass panels to provide architectural identification.Bandalux worked closely with both the architect and the real estate Iempa Immobiliare to provide shading solutions depending on the location and type of building. Z-Box, B-Box Systems and Cofre style awning are place externally, being three different options to management sunlight.Polyscreen® 403 and Trend Light BO fabrics configured these systems according to the lighting needs: visual contact or perfect occultation. On the other hand, Premium Plus roller blinds s are installed inside, providing optimal solar control and comfort.

Edinburgh is a historic and culturally rich city. The design of the unique rooms and suites in the hotel reflect the spirit of the city. The interior design is breathtaking! The design concept from Keppie included unusual circular brass inlays for the beautiful Terrazzo flooring. Terrazzo is a composite material that is poured in situ. It consists of chips of marble, quartz, granite, and glass. The challenge was to integrate our products seamlessly into the opulent surroundings.The brass inlays supplied by Dural allowed the Terrazzo to be segmented into unusual flowing shapes and areas. Circles were specified and the Dural Z-Flex machine allowed the brass inlays to be shaped on site or prefabricated and delivered. This allowed for a reduced time schedule for such a complex design. High end materials were used throughout, creating a luxurious feel. The unique geometries that make up the flooring of ‘W Edinburgh’ coordinate seamlessly with unique furniture, artwork and lighting. A truly fabulous guest experience.

On this redevelopment project we worked closely with McLaren.Excell Architects to manufacture and supply bespoke concrete kitchen worktops and concrete cladded central island in a newly renovated penthouse flat at a warehouse in Shoreditch.The glass fibre reinforced concrete central island, splash backs and worktops were manufactured using our special GRC BTX concrete, which is lighter and stronger than traditional concrete. We used our unique eco concrete mix technology with a hydrophobic agent to limit moisture absorption. The individual elements were precast in our workshop for assembly on site and then hand polished and treated with a specialist sealant. Living Concrete’s worktops are extremely strong and durable and can be used indoors or outdoors. By using the best of modern technology, we have created a sleek contemporary look that demonstrates how concrete can be both eye catching and functional.

A large expanse of Junckers’ solid hardwood flooring has been installed in the Paul Hamlyn Hall at The Royal Opera House, Covent Garden. The light-filled space is the ideal partner for the dark grey Spicy Pepper Oak floor, adding an elegant backdrop to the smart interior. The magnificent glass and iron structure was originally built as a flower market and now houses a restaurant and champagne bar, where events and performances also take place. A busy public area requires a hard-wearing floor which is able to withstand heavy usage. The choice fell on Junckers, whose floors are reliably durable and easy to maintain, ideal for high traffic areas. The naturally occurring structural grain patterns in oak bring a sense of warmth to the large and open hall, complementing the many original architectural features. The flooring contractors were Junckers’ Approved Contractor PICA Floorings Ltd. 

PROJECT OVERVIEWThe Sainsbury Centre for Visual Arts was designed by Foster & Partners and commissioned by main contractor Kier Eastern. The brief was to replace 30-year-old partitioning with a system capable of fitting in with a visually aesthetic solution which was in-keeping with the existing architectural style.OUR SCOPE OF WORKThe demands of supplying architectural partitioning solutions within a visual arts centre environment meant that only the highest standards of design and functionality would be acceptable. From the start of the design phase, we worked in partnership with Norman Foster and Kier to create unique modular steel and glass partitions throughout the building. Bespoke doors provided the ultimate finish. Our approach was to ensure that functionality and aesthetics worked together to deliver consistency and innovation throughout the building. Attention to detail was paramount to the success of installing bespoke partitions within the creative surroundings of the Centre. 

A residential home in Enfield, London, was extended out the back of the property and charred Accoya wood was the chosen material for the cladding. Innovative architects, Studio Hatcham, specified charred Accoya wood to make the extension distinguishable yet sensitive, enhancing the existing grey brickwork, rather than overshadowing it. The Accoya was treated using a charring technique, taking the wood from its originally light colour to a darker, burnt effect. The cladding was charred in three varying shades, creating depth to the extension; light brush “Shizen”, Graphite “Seizo” and Anthracite “Gen no”. For the posts, a deep black effect was chosen to define and accentuate, in particular, the large glass opening of the extension into the back garden. Despite charring the wood, Accoya remains durable and stable with a 50-year warranty against rot. This alongside its great sustainability credentials, made it the perfect choice for this extension.

Radii joined the fit-out for this asset management company’s new European headquarters in mid-2022, working for approximately 20 weeks to deliver our high-end commercial solutions for 179 offices and meeting spaces across Levels 1 to 4 of the 88,000 sq ft site.Curved double glazed Parallel 50 (45dB Rw) partitions were manufactured and installed by Radii for a number of meeting rooms fronts, while single glazed Linear 25 (41 dB Rw) and double glazed Parallel 100 (50dB Rw) were also deployed to match the variety of acoustic requirements. Mesh glass was used in places on Levels 2 to 4 to provide extra privacy around reception and lounge areas respectively.Partitions were complemented with smoked dark European oak timber veneered doors throughout the space.

The village of Papekop is located in the west of the province of Utrecht, surrounded on three sides by the province of South Holland.Here, in collaboration with Arco Architecten Bna, a stylish barn house is fitted with two louver systems. By Sunshield.The entire facade on the southwest is made of glass, and has a surface area of 34 m2. The ground floor is equipped with a rectangular slat system. On the second floor, the louver system begins as a rectangle, but ends at the top of the ridge triangular.Each system is operated by a motor with remote control, so independently of each other.The residents have opted for the 96-E louver. A blade with a modern, sleek design and a width of 96 mm. When the slats are fully open, the view between the louvers is 90 mm. The residents can then fully enjoy the rural panorama from their residence.The aluminum components are powder coated in RAL 9004, signal black. The plastic parts are black.

Rosa Alpina is a boutique Alpine hotel that boasts a two Michelin-starred restaurant and a scenic setting in the Dolomites – one of the world’s most beautiful places.The original building dates to 1850 and local antiques, wood carvings and old photographs complement its wood-panelled ceilings and thick, frescoed walls. Fresh flowers and roaring fires complete a convivial vibe.The 51 spacious rooms and suites each feature a seating area and subtle cream and grey colour scheme. Newer guestrooms offer more contemporary design, with glass-encased fires and sleek timber furnishings, yet still respect local traditions with wood-panelled ceilings, fire wood baskets and ceramic stoves. The new Vetralla bath has specified within these new contemporary rooms.Photography: © Six SensesPhotography: © Six Senses

Split over basement, ground and three upper floors, the Charles Doll Building on Grape Street, London, offers a contemporary and functional specification in this stunning office refurbishment. The development mixes industrial elements with a crisp modern aesthetic by carefully combining characterful architectural features, including vaulted ceilings with exposed brick and steelwork.Named after its architect Charles Fitzroy Doll, the building is clad in decorative thé-au-lait (“tea with milk”) terracotta – Doll's use of grand façades is understood to have resulted in the expression, ‘all dolled up’. The first floor has been fitted out to a high standard with office furniture from Vitra, providing the perfect space for those who want to move in and get straight to work.The lobby mixes vibrate contemporary wall art with industrial light fittings and brickwork. Forza’s in-house CAD team planned the bespoke black oak Firescreen partition wall to match the architect's design. As a market leading passive fire product, this Firescreen provides both integrity from Smoke and Fire and insulation from heat. This is important because in a fire emergency heat has been shown to ignite secondary fires to items, such as curtains or carpets, that are near the other side of non-insulated partitions.Via the Thinking Space Design & Build, Forza Doors supplied twenty FD30 Fire Doors with stained frames and skirting boards to match throughout the five floors of The Charles Doll Building. Chosen to match the steelwork throughout the development, the dark satin finish of the doors was selected from Forza’s Creato range of dyed veneers. This ‘Illunis’ finish is one of twelve fashionable choices in the range. Dyed veneers are an increasingly popular choice with designers as they offer cost savings over stained veneers without compromising quality.The Doors with glass vision panels, required to allow light through to the stairwells, feature our flush and quirk bead. A minimalist design option where one side of the doors is completely flush right up to the glass vision panel and the other side has a very simple elegant bead detailing.

The Schuster Annex on the University of Manchester's main campus when built, was intended to become a catalyst for excellence in STEM teaching, and was linked to the circular spaces within the existing buildings. Designed by Hawkins Brown, constructed by sector specialist Wilmott Dixon and fabricated by Dortech, the Science Annex formed part of the universities master plan. James Sutherland, Managing Director of Dortech, commented: “We were awarded the contract for the Schuster Annex by Willmott Dixon, following a competitive tender process; with our package including a number of striking design features.“These included 1,000m2 Technal MX Thermally Broken Curtain Wall with 200mm extending face caps as well as the FY65  ‘punched-hole’ windows in RAL 7043 Traffic Grey, plus some 1,500 linear metres of aluminium flashings. The glazing units feature the use of SGG COOL-LITE® SKN 14 glass with digitally printed artwork.”While the 8mm COOL-LITE® outer leaf provides solar control, the thermal performance of the IG units also benefits from an argon filled 18mm cavity and a 10.8mm thick inner leaf of coated laminated glass. The glazing specification, along with the design of thermally broken framing system also deliver a sound reduction of 40dB or more without special enhancement. Referring to the success of the curtain walling and fenestration solution from Dortech and Technal, Willmott Dixon’s Project Manager, James Goodwin, said: “This was a challenging project, not least because of the building’s proximity to a main road and the MRI (Manchester Royal Infirmary) with ambulances and other emergency services going past all the time. In terms of the acoustics, the transfer of noise, it has performed wonderfully well. Also, the Technal systems meet all of the thermal insulation requirements whilst, aesthetically it looks fantastic. Everyone is pleased with the completed project.”Completed in 2018 at a cost of approximately £11m, The Schuster Annex provides 2,500m² of space across it's four floors with what has been named the "Ideas Mill" and break out spaces at ground level. 

Heavy duty hinge Wash basin SolutionPROBLEMKey IssuesWhen using concealed hinges on wide doors, a several hinges must be used to support the door, otherwise it will sag.Product InformationOne-touch Heavy duty concealed hinge J95— Suitable for heavy doors up to 25 kg (2 hinges) and 40 kg (3 hinges).— Can also be fitted to glass doors by using the optional glass door faceplate.— Easy, one-touch attachment and removal of the door.SOLUTIONThe SolutionThe use of high load-bearing hinges meant that even wide doors could be supported with fewer hinges.Issue of wide door saggingConcealed hinges are essential for opening and closing furniture doors. However, with wide doors, the door will often slope downward, or “sag,” unless many hinges are used. This article will explain how this problem was addressed.What causes the doors to sag in the first place?The following are some of the reasons why a door may sag:— The door is too heavy— The door is too wide— The interval between the hinges is too short— Too few hinges are usedThe common issue with all of these problems is that the hinges cannot support the weight of the door.The Powerful J95 hinge to support even the heaviest doorsThe J95 concealed hinge is an ideal solution for hanging wide doors. This is specifically due to its high load-bearing capacity: 25 kg for 2 hinges and 40 kg for 3 hinges. It is possible to support heavy doors with fewer hinges than with conventional ones.Support 800 mm wide doors with just two hinges!A luxury hotel in Korea used the J95 concealed hinge for the bathroom sink plumbing maintenance door. Due to the 800 mm width of the door, it was necessary to use at least three conventional hinges, but with the J95, only two were needed. Since only two J95 hinges are required, it creates a cleaner and more visually appealing appearance. Additionally, since the same type of maintenance door was needed throughout the hotel, using only two hinges greatly decreased the overall installation time.

The Living Concrete team provided design consultancy and were selected to project manage the delivery of a new kitchen for a celebrity chef.The glass fibre reinforced concrete central island, table-come-workbench was manufactured using our special GRC BTX concrete, which is lighter and stronger than traditional concrete. We used our unique eco concrete mix technology with a hydrophobic agent to limit moisture absorption. The individual elements were precast in our workshop for assembly on site and then hand polished and treated with a specialist sealant. Large format GAP wall panels with concrete caps in Mist Rough finish completed the design.Living Concrete’s worktops and tables are extremely strong and durable and can be used indoors or outdoors. By using the best of modern technology, we have created a contemporary and elegant space that demonstrates how concrete can be both good looking and functional.

The Tianjin Juilliard School of Performing Arts located in the Yujiapu Financial District in China, is the outcome of the brilliant minds of architects Diller Scofidio + Renfro.Characterized by its four featured pavilions and five glass bridges, they all house classrooms, teaching studios, practice rooms, concerts and recital rooms that allow students to merge themselves with the visual and auditory environment during the process of studying music.The architects in charge of this project have been heavily involved in the selection of the materials and have participated in several encounters with the PARKLEX PRODEMA team to discuss the aesthetics they aimed to achieve. We have devoted ourselves to choose each and every panel in connection with their detailed criteria so as to attain the finest design.The exterior of the building deploys the PARKLEX PRODEMA NATURCLAD-W wood panels for architecture of rustic finish, which are highly resistant, durable, and sustainably sourced. The wooden paneling, with their earthy tones, synthesizes with the park surrounding landscape ensuing a harmonious junction with nature.

Radii create a bespoke glass partition system design for BCG Digital Ventures, with new dies manufactured especially for the project at our in-house manufacturing facilities.Previously, Radii had worked at 80 Charlotte Street for BCG to produce a stunning timber-framed partition system across 257 meeting rooms and offices in the floors directly above the Digital Ventures site. This new installation was designed to match our original work for BCG and create a synergy throughout the space — but with aluminium framework used in place of timber.The final installation used 100mm wide single glazed partitions and joinery with consistent mullion details. Furthermore, bespoke dies were also created for black powder coated aluminium light portals that were installed around some partitioning elements with integrated LED lighting.Radii also provided some fire rated glazing from the FirePro range, certified up to Ei120 rating for screens and Ei90 for doors.

ModernGlide were over the moon too be involved with this project with a top London Interior Company at St Katharine Docks London. Installation of over 66 meters of sliding movable wall panels to help create a sleek and flexible studying environment. Featured in the video is the MG600 flush glazed movable wall that when closed creates a central room with the panels meeting at right angles and the addition of 2 access door panels. Particularly desirable for office spaces, our MG600 glazed office partitions and glass movable walls offer multiple benefits to your workspace and for your employees. The benefits of having glazed acoustic walls include allowing a superior light flow around the office, cost-effective installation, flexibility in the work environment as well as the simple fact that they look elegant and classy. Not only these, but they also offer exceptional sound reduction allowing for privacy to be had amongst clients or for important internal meetings.

In 2020, Paul Dow Joinery approached us to create the kits for a two 5 bed house luxury development he was undertaking in Burntisland. The client wished to create energy efficient, large open-plan house's with wrap around balconies and large glass expanses to allow lots of solar gain but also draw attention to the amazing view of the River Forth right across to Edinburgh.Fast forward to July 2023 and we've only been on site for 4 days and look at the headway that has been made on the first property. The ground and first level are almost complete and ready for the roof. The client has opted for a large glazed roof panel to allow light through the mezzanine level down to the ground level.The houses will promote various renewable's including an air source heat pump, underfloor heating, solar panels and triple glazing to compliment the high level of air tightness provided by the SIPS system.

Turning a roofscape into a power station just got better. The combination of GreenCoat PLX with integrated, almost invisible solar functions to deliver green energy and good looks. The solar modules are bonded directly onto the metal roof within the controls of a factory environment at Metal Solutions Ltd, Bolton. Lightweight and maintenance free with no access requirements for cleaning the solution is a real game changer. Each module is 358mm wide and sits between the Snaplock® standing seam profile. In harmony with GreenCoat Mountain Grey the solar modules are virtually invisible from the street. A traditional Glass Crystalline module would add substantial weight, wind sheer load on the standing seam fixings and require access for bi-annual cleaning with the then risk of damage during that process.The thin, flexible solar modules do not detract from the design of the house and offer an excellent yield even in low light conditions.

During the core renovation of the Frankfurt office tower, the Lindner Group was entrusted with the complete basic fit-out and one of the tenant fit-outs. In addition tocarrying out various drywall works, high quality raised floors and energy-efficient heated and chilled ceilings were installed in combination with lighting systems fromLindner. High-quality wooden doors from Lindner’s own production, related joinery work, as well as flexible system glass partitions complete the construction package. Lindner also carried out plastering and painting work as well as tile, coating and flooring work, and additional installation services.Despite numerous challenges such as (heritage-protected) construction in existing buildings and the high logistical effort involved, the vision of a modern office tower wassuccessfully realized. Thanks to sustainable construction systems and building services combined with effective thermal insulation measures, the Global Tower is set tobe awarded with the DGNB Platinum certification.

This is the latest cycle hub designed, manufactured, supplied and installed this month by Falco for Stromness Travel Centre, located on the southwestern area of the picturesque Orkney Islands mainland.Installed on behalf of the Orkney Islands Council, the new cycle hub provides visitors to the Travel Centre with up to 20 secure cycle parking spaces utilising traditional Toaster cycle racks.In addition to the cycle parking, the cycle hub has been provided with 24 convenient lockers for the storage of helmets and personal equipment. The cycle hub makes use of toughened safety glass and bespoke branding graphics chosen by the client with powder coated applied to the galvanised steel framework in an attractive ‘Sapphire Blue’ RAL colour.The images attached show the new cycle hub installation, taken on a windy Wednesday afternoon and located on Ferry Road, near to the Stromness Ferry Terminal.Stromness Travel Centre is a tourism office providing visitors to the island with all travelling and sightseeing needs within one stop - with leaflets, timetables, booking services and a souvenir shop available to use and now secure sheltered cycle parking.The FalcoLok cycle hub as shown here at Stromness Travel Centre, is a contemporary cycle store manufactured from a combination of a galvanised steel frame and reinforced safety glass, designed to be sympathetic to the surrounding area. The FalcoHub was developed by Falco’s in house design team to ensure it met the client’s specification including structural calculations so that the whole design meets the UK/European CPR regulations EN1090 and is CE marked as per UK law.In addition to the cycle hub shown here for Stromness Travel Centre, Falco has also recently installed cycle hubs for many locations across the UK including Crewe, Runcorn, Birmingham International, Warrington Bank Quay and Carlisle station for Avanti West Coast, Bradford Royal Infirmary and St Luke’s Hospital for Bradford Teaching Hospitals NHS Foundation, The Royal Oldham Hospital for Pennine Acute Hospitals NHS Trust, Ninewells Hospital & Medical School in Dundee and a bespoke cycle hub for Leicester City Council.For more information about the scheme here at Stromness Travel Centre, or how Falco can assist your cycle parking project, please contact our helpful sales team at sales@falco.co.uk.

Falco has completed the fourth cycle hub installation at The Telford Langley School in Telford as part of a new tranche of secure cycle hubs located at key areas across the borough.The scheme which got underway last year involves the design, manufacture, supply and installation of bespoke cycle hubs coupled with associated FalcoLevel-Eco two-tier cycle racks to allow commuters, residents and visitors to quickly and conveniently park their bike whilst on the go.The latest 6m x 4m cycle hub as shown here at The Telford Langley School, is based upon the UK’s most popular cycle hub design – the FalcoHub, which is manufactured from a combination of a hot-dip galvanised steel frame with reinforced safety glass cladding. FalcoLevel-Eco two-tier cycle racks have been installed providing secure accommodation for up to 28 bikes.A convenient FalcoFix 2.0 cycle station has been supplied allowing cyclists to inflate tyres and carry out basic cycle maintenance whilst on the go.The secure cycle hub also comes complete with proximity LED lighting, eye-catching ‘Travel Telford’ branding graphics and powder coating in an Anthracite Grey RAL colour.In addition to the cycle hub here at The Telford Langely School, Falco has also manufactured and installed three other cycle hubs for Telford & Wreking Council, with other cycle hubs located at Rampart Way – across the bridge from Telford Central Station, at Wellington Civic & Leisure Centre – to the right of the car park entrance, next to the Wellington Town Council building and at Oakengates Station – situated to the right side of the main entrance.The FalcoHub, as shown here for Telford & Wreking Council, is a contemporary cycle store manufactured from a combination of a galvanised steel frame and reinforced safety glass, designed to be sympathetic to the surrounding area. The FalcoHub was developed by Falco’s in house design team to ensure it met the client’s specification including structural calculations so that the whole design meets the UK/European CPR regulations EN1090 and is CE marked.For more information about the scheme here for Telford & Wrekin Council or how Falco can assist your cycle parking scheme, please contact our helpful sales team on 01538 380080.

The GemA full redesign and refurb took place at the ground floor of 111 Piccadilly in the heart of Manchester to accommodate a multifunctional co-working space within an independent coffee and lounge.IQ Projects have created a sculpture-like façade, using triangle structural glass panels in combination with our bespoke made, real oak veneered Technowood panels.Extraordinary design with extraordinary limitationsThey wanted to build a façade that is not only artistic and beautiful from the outside, but it is also practical and part of the interior design as well.All the glass panels are functioning as windows, letting light into the lounge and providing visibility to the outside.The complex structure had to use minimal sections too, so it can achieve the design. IQ has used steel instead of aluminium to build the structure, so it remains slim.The other challenge was the wooden elements. A specialist product was needed. Wooden panels that are strong, large and thin enough to be used.Panels that will stand the weather conditions, and requires minimal maintenance.We were able to supply these open grain oak veneered panels, that is rich in texture.Technowood eliminates the design limits of wooden elementsUsing real wood veneer has been popular for decades, the reason it gained popularity was to achieve better designs while saving on cost.Technowood has leveraged the benefits of this method and created patented solutions that ensures the veneers will last externally on all kinds of materials, such as Aluminium.With Technowood we can create the most unique pieces of real wood finished products. Some of the key benefits of Technowood products:It can be A2 fire ratedMuch lighter than solid timber or even composite materialsUp to 60% quicker on installationNo flitch beams nor unnecessary reinforcingNo visible fixingsWarranted for 20 yearsFSC and Environmental Product DeclarationAnd it looks like timber … because it is wrapped in real timber veneer. We do have in-house designers that offer solutions should you require. You can visit our office and showroom which is based in the Sky House design Centre, Amersham. Easily accessible by public transport (metropolitan line) or by car (M25 J18/M40 J2), please make sure you book an appointment.

The 110m, 29-storey curved on plan Westmark Tower is the tallest residential tower to have been completed in central London in 2021. Part of Berkeley Homes Central London’s prestigious West End Gate development in Marylebone, it features more than 14,000m2 of unitised curtain wall designed and supplied by aluminium fenestration specialists AluK and installed by envelope contractors Martifer. What makes this project really stand out is the collaborative approach that was demonstrated by AluK and the other consultants involved from the outset. With Berkeley at the centre of the process, the technical and commercial elements of the façade were successfully de-risked at pre-tender stage because AluK were able to work directly with lead architect Squire & Partners, delivery architect Design Delivery Unit (DDU), façade consultants Cladtech Associates and structural engineers WSP on a RIBA 4 system design for the unitised envelope. The challenge for AluK was to work with DDU to deliver a design that was true to the architect’s original intent whilst addressing the technical issues of a curved on plan façade from the second to 29th floor. All the unitised cells needed to be dead loaded back to a post tensioned concrete frame with a 3-dimensional floor bracket, whilst catering for the varying facets of the façade.The final unitised solution features more than 2200 unitised cells of three principal configurations. Each floor comprises: a vision cell, typically housing AluK’s concealed vent and full height glass panes, a panel cell, specifically designed to house specialist internal framework to carry articulated GRC (Glass Reinforced Concrete) feature piers and spandrels, and a recessed balcony cell with an integrated floating glass balustrade.With 36 different angles to overcome in a faceted design ranging from 0° to 15°, AluK developed a series of common aluminium extrusions to close the joints and reduce the number of profiles required. The horizontal stack joint uses an aluminium profile to carry the gasket and avoid the incidence of crimping as the cells are stacked around the building structure. What is also significant is that every cell connection provides four lines of system seal to ensure that the façade meets the stringent Cladtech performance specification and the CWCT Sequence B test.AluK’s system, extruded from 6063 T6 alloy, extracted benefits from both a mitred corner and a square cut system by creating a hybrid to suit both the client’s aesthetic desire for a mitred joint to the corners and Martifer’s manufacturing requirements of a square cut for economy.AluK also extruded tailored aluminium bracketry from a structural 6082 T6 alloy which was capable of supporting the system weight and allowing for 3-dimensional adjustment for precise installation.From the onset of the project, the Berkeley director team set out a time and design model of early engagement, specialist designers and fabricators all within a clear programme. This also included a series of productive workshops sharing client expectations and considerations. AluK not only facilitated these meetings but also bought into the collaborative ethos and contributed to a highly successful project for Berkeley.AluK’s designers are all from a fabrication/installation background and, as such, they design a value engineered solution from the outset. Part of this was using 14,000m2 of AluK’s AW86 unitised curtain walling system with minimal bespoke profiles and gaskets, yet it meets every challenge the project presented whilst offering a significant cost reduction in metal and accessories compared to the original specification in a competitor’s system. As part of the project team, AluK worked collaboratively alongside consultants Squire & Partners (concept architect), Buro Happold (thermal and acoustics), WSP (structures), Design Delivery Unit (delivery architect) and Cladtech (façade consultant). The façade design meets the thermal efficiency requirements of the building at 0.95W/m2K, as a weighted average. Using a 43dB Rw(+Ctr) acoustic glass, it also meets the sound reduction targets. Because AluK was involved at such an early stage in the project, the complete RIBA Stage 4 system design enabled façade contractors Martifer to realise significant cost savings for their tender and several months of time saving against their usual post-tender design and iteration phase. This also offered cost certainty for Berkeley and significantly de-risked the post tender delivery of the façade.Alongside the unitised curtain walling, the finished Westmark Tower will feature 241 AluK SC156 lift and slide doors, 750 concealed vents and 58 swing doors.West End Gate is Berkeley Homes’ latest luxury development being built on a 2.66-acre site. Described as a modern interpretation of classic London, it will feature a series of contemporary mansion blocks alongside the 29-storey curved stone tower. Work began on the first phase of West End Gate in the Spring of 2018 and was completed in Spring 2021, with internal fit out nearing the end.

Located on the picturesque waterfront of West Kirby, Wirral, The Sail is home to eight luxury apartments on South Parade overlooking the River Dee estuary to Wales. The building itself has a striking geometric form with a unique glass façade, reminiscent of art deco coastal properties from the 1930s.The apartments occupy four storeys over one thousand square metres and are flooded with an abundance of natural light thanks to the floor to ceiling windows, which also emphasise a strong connection to the outdoors. Alumasc Water Management Solutions were asked to assist and supply a number of bespoke products including aluminium fascia, modular soffit and coping systems from Skyline.  “Skyline was specified for its quality and ability to provide bespoke designs and solutions,” says Ivan Colvil, Senior Skyline Technical Sales Manager. “Numerous profiles were needed due to the building’s unique shape, which presented a challenge. It took a great deal of technical support and working with the architect to fulfil the brief.

Non-Conductive Fencing, Trench Covers and Access Structures | Case StudyPower and Energy Infrastructure Contractor Morgan Sindall was appointed to design, build and commission the new converter station and chose to work with Dura Composites to provide safe, non- metallic Glass Reinforced Polymer (GRP) utility fencing for the AC/DC Halls, as well as a range of non-conductive access structures, utility trench covers & handrailing across the site.The IFA2 project aims to connect the electricity systems of Great Britain and France using high voltage subsea cables and will be capable of exporting or importing 1000MW of power between the UK and France, enough to power up to 1 million homes. In this project, the client specification mandated the use of non-conductive and non-metallic materials which could be used to construct removable fencing, permanent fencing and sliding gates to enable access to specific authorised personnel, whilst preventing others from accessing high-risk areas.

GRP Rail Station Platform - Hybrid Install | Case StudyRobroyston station features two brand new platforms constructed using the Dura Composites recommended hybrid GRP and steel solution which is designed to meet the requirements of Network Rail standard NR/L3/CIV/030 and combines the strength of a steel foundation with a Glass Reinforced Polymer (GRP) Dura Platform surface. The platform surface has incredible durability and anti-slip properties which is shown to reduce by only 5% after a million footfalls (tested to BS 7976-2:2002+A1:2013).AmcoGiffen were responsible for delivering the design and build works for the development, with funding for the station coming from Glasgow City Council, Network Rail and the Strathclyde Partnership for Transport.In choosing the GRP/Steel system from Dura Composites, the platform installation for the project (using GRP Dura Platform and steel trestles) has been able to take place largely while the line is open, minimising the impact on customers using the line.

The Egyptian Gallery was the first of many projects at the Museum to benefit from a replacement duo-pitch rooflight using Lonsdale’s ThermGard Roof Light System.After having procured roof lanterns of varying quality and with disappointing results from different manufacturers, the Client was determined to establish a design that met their very high criteria for thermal performance and protection of the priceless exhibits from damaging UV light. Whilst wanting the benefits of modern aluminium systems, there was a requirement for a ‘heritage’ appearance so that any replacement roof lanterns mirrored the original timber construction. High performance solar control glass was also specified to reduce harmful UV light to the exhibits below. Solar protection was further enhanced by the fitting of external shading blinds to the overhead glazing which produce the slightly ‘eerie’ affect that can be seen in this image. Such was the success of this initial project, the Client has held Lonsdale as the benchmark by which other roof light manufacturers are measured and we repay this loyalty by ensuring a first class job every time.

It was a partnership that was meant to happen. Premier Inn Hotels meets Premier Security & Fire Ltd.It was our absolute pleasure to assist commissioning company Mulalley by manufacturing and installing the external glass and steel communal entrance doors, industrial louvres and security gates (all to LPS 1175 SR2 standard) at the impressive Ladderswood Estate regeneration project in New Southgate, North London, a development that includes a new 85-bedroom Premier Inn hotel.New Ladderswood LLP is a joint venture between top UK developer Mulalley and housing association ONE HOUSING GROUP LIMITED, working in collaboration with the London Borough of Enfield.This major regeneration development features:93 social housing properties56 shared ownership apartments368 privately owned properties517 properties in total (426 apartments and 81 houses)There will also be:6 commercial unitsAn 85 bedroom hotelA new community centerFor more details, call us on 0208 559 8295.

Architects HLW reached out to the Radii Pre-Construction Design team back in September 2021 with their design intent for a really unique glazed partition project for British multinational retail company Kingfisher.With the client being the home of many notable DIY and home improvement brands such as B&Q and Screwfix, HLW’s initial design aimed to create a ‘workshop’ aesthetic to the space through a combination of timber doors and upstands with glazed windows.The final design required steel framework to support the glazed windows and create the timber upstands.Radii’s Product Development Department developed this detail with the Pre-Construction team and conducted virtual stress testing to ensure the structures would be adequate to support the weight of the glass.The bespoke nature of the design and system meant that acoustic assessments needed to take place before the system could be specified for the project.Radii’s internal acoustic team helped to develop the design and conducted our own assessments, before the system was externally assessed by a third party to provide certification to the architect.