NBS Source
I'm a manufacturer

"protection services"

4,540 results found

Sort by:

Showing 433-442 of 442

Sponsored
Castlebar Government Offices

Castlebar Government Offices

Bauder Ltd

Castlebar Government OfficesBauder Total Roof System (BTRS) and BauderThermofol PVC single ply waterproofing systemSynopsisThe roof area of this government office building was complex due to expansion joints, air conditioning units and intricate detailing requirements. Work hours had to be agreed with the client to keep disruption to other ongoing work at the site to a minimum and insulation upgrades were necessary to satisfy building regulations. The office also had to remain open throughout the works, causing some logistical challenges. All deliveries were timed so not to cause any disruption to visitors coming in and out of the facility.Bauder Building BoardProject:Castlebar Government OfficesLocation:Castlebar, Ireland​Roof Area:2,500m²Specifier:Office of Public Works​Approved Contractor:Deane Roofing & Cladding​The specificationBauder’s bituminous system, BTRS, was specified because it is durable, robust and can withstand permanently sited loads of up to 2000Kg/m². The system build-up included Bauder’s 100 mm Thermotech Glass insulation for superior thermal performance, ensuring the roof achieved the required 0.17 U-Value. Small linking roof areas were waterproofed using Bauder Thermofol PVC single ply system, which is long lasting, possessing high tensile strength of over 1100N, and allows for no physical penetrations of the roof.Products appliedBauder Total Roof SystemIntegrated bituminous waterproofing system with a life expectancy in excess of 40 years.Bauder Thermofol PVC1.5 mm single ply membrane can be guaranteed for up to 20 years depending on system type.System installedBauder Total Roof System (BTRS)1 Bauder K5KA heavy duty, torch-applied SBS elastomeric bitumen capping sheet, featuring a spunbond polyester reinforcement to allow the finished product to cope with structural movement without fracture. The mineral finish provides protection against UV degradation.2 Bauder ThermotechPIR insulation board with a coated glass tissue facing on both sides.3 BauderPIR FA-TEAn efficient PIR insulation board with aluminium foil facing on both sides. The top facing features a printed grid pattern to aid site cutting. It is lightweight and has zero ozone depletion potential.4 BauderTEC KSD FBSA self-adhesive SBS elastomeric bitumen air & vapour control layer, with a mica finish.Bauder Thermofol PVC single ply waterproofing system1 Bauder Thermofol U15 FRA 1.5mm thick, reinforced PVC waterproofing membrane. Stated within BBA certificate 06/4354, the Thermofol PVC waterproofing membranes have a service life in excess of 35 years. 2 Bauder PIR MTissue-faced flat board insulation, benefitting from a zero ODP and a Green guide rating of ‘A’.3 BauderTEC KSD FBSA technically advanced self-adhesive elastomeric bitumen air and vapour control layer with an aluminium foil facing for vapour impermeability.AdvocacyProject specifier, Tony Collins, Office of Public Works:“Bauder delivered a comprehensive roofing solution that utilised their top quality products and unrivalled technical support. Despite the design and logistical challenges encountered, the new roof system was delivered on time and to budget much to the delight of the client” 
Sponsored
Kalwall Translucent Cladding - West Croydon Bus Station

Kalwall Translucent Cladding - West Croydon Bus Station

Kalwall

• The West Croydon Bus Station in London is a vital link for the millions of people every year commuting to work from the South and South East into London. The station forms a hub for over 150 buses per hour with the adjacent tram stop and West Croydon railway station providing routes to both East and West London as well as to the City and Docklands.• The redevelopment of the bus station forms part of a £50 million programme of the Main Street public pedestrianised space and transport infrastructure to transform the town centre by creating a more attractive environment in which to live, work, socialise and do business.• Designed by Transport for London’s in-house team of architects headed by Martin Eriksson, the project goal was to create a user-friendly waiting and assembly shelter to cope with a 20% increase in passenger numbers and provide a brighter more spacious environment to service the vast number of passengers using this interchange daily.The SolutionThe normal choice of construction for a translucent and weatherproof canopy would be to glaze the roof with glass. However the project team at TfL realised that Kalwall® offered a better solution in this location. It would not only solve the design requirements and contribute to a better design but would offer many other benefits over traditional glazing.For example, since Kalwall is much lighter than glass the supporting structure could be less strong and far less substantial. This meant the vertical supports were less obstructive and opened up a better view of the environment, including the very attractive St Michael’s Church located nearby which had previously been blocked from the view of waiting passengers. The corten steel (weathering steel) support could also be subtle and worked into arches and patterns meant to mirror and complement the church.Furthermore, Kalwall is visually far more attractive than glass while eliminating shadows, hotspots and glare and the stark contrasts of light and shade; all improving the experience for passengers underneath.As Kalwall diffuses natural daylight downwards and reduces vertical illumination and reflection upwards at night, it can control light pollution on the surrounding high-rise buildings while emitting a very attractive ethereal glow, making it a beacon for travellers.Maintenance-wise, Kalwall is also an effective choice. Soil and detritus are less obvious on Kalwall than on glass and cleaning is much simpler because access scaffolding is not required and maintenance staff can safely walk across its surface.The CommentsMartin Ericksson comments, “Transport for London has a long and rich design heritage. The approach to the redevelopment of West Croydon bus station has sought to build on this heritage and recognises that waiting for your bus should not just be a perfunctory experience, instead it should be a positive one enhanced by good architecture. Site constraints, high footfall and the poor design of the previous station, presented an excellent opportunity to demonstrate the difference good architecture can make through improved layout, better passenger movement and accessibility – whilst supporting the West CroydonMasterplan.Brick was chosen to connect the station to its urroundings, especially the adjacent listed church. Using Kalwall brought many advantages and benefits in relation to its lightweight yet strong structural qualities. It has helped enhance daylight transfer and protects from sunglare whilst reducing hotspots and solar gain. The material’s soft translucent qualities contrast beautifully with the building’s warmth and texture, providing a sheltered waiting environment with the added advantage of low maintenance and high performance.”
Sponsored
122 Waterloo Street, Glasgow

122 Waterloo Street, Glasgow

Pilkington United Kingdom Limited

The newly completed 122 Waterloo Street development in the centre of Glasgow offers its occupants floor-to-ceiling glazing throughout, with almost uninterrupted views thanks to the latest Schüco curtain-walling system designed, manufactured and installed by Edinburgh-based façade specialist Charles Henshaw & Sons Ltd.But, impressively, the landmark building – which will be the Glasgow headquarters of global financial services firm Morgan Stanley – will also be one of the most energy efficient buildings in Scotland, thanks in part to high-performance glass coatings from Pilkington United Kingdom Limited.The scheme has been certified BREEAM Excellent, and achieved an ‘A’ rated Energy Performance Certificate (EPC), the latter based on a detailed assessment of the building’s energy performance. The glazing helps to minimise this by reducing energy emitted from the building, as well as the heating effect of the sun, both of which can make maintaining a comfortable interior climate more energy-intensive.A glass for all seasonsThe scale of the building and the large area of glass used means that excessive radiation of heat from the building could lead to rapid heat loss during colder conditions, requiring an increase in heating to keep the interior warm.To mitigate this effect, the glazing features a Pilkington Optitherm ™ S1 Plus low-emissivity coating which reflects radiated heat back into the building.The second issue that can affect buildings where most of the envelope is glazed is excessive heat build-up when the sun is shining directly into the interior. This can present a challenge for building managers, often requiring high levels of energy-intensive air conditioning.To combat this, a solar-control coating has been used, reducing the amount of heat energy that is able to enter the building while maintaining high levels of transparency. Michael Metcalfe, commercial sales manager at Pilkington UK, said: “The Pilkington Suncool™ 70/35 T coating selected by the design team offers high visible light transmittance, reduced solar transmittance and excellent low-emissivity all in one product.“This means the floor space will be brightly lit by sunlight but won’t suffer from overheating on warmer days.”Clear viewsThe coatings are not the only innovative part of the glazing used in the project, as the glass is held in place by the latest structurally bonded curtain wall system from manufacturer Schüco. Each unit contains a large pane of clear glass and a smaller pane of opaque, coloured spandrel glass, creating horizontal lines across the façade between each floor of the building.Michael Metcalfe continued: “The metal carrier frames in which the glass sits are extremely low profile, so the edges of the panes of glass are very close to one another. This removes the mullions normally associated with unit-based glazing systems, creating a flush glass surface with almost uninterrupted views.”The clarity of the glazing was further improved by the use of Pilkington Optiwhite™ true low-iron glazing throughout, which significantly reduces the slight green tint that is inherent in standard float glass.On the ground floor, Pilkington Optilam™ laminated glazing was used to provide protection against manual attack and increase the security of the building.Completed in December 2017, the nine-storey building also includes 155,000 sq ft of Grade A office space.Project: 122 Waterloo Street, GlasgowClient: HFD GroupArchitect: Micahel Laird ArchitectsCurtain walling supplier: SchücoInstaller: Charles Henshaw & Sons LtdImages courtesy of S G Photography
Sponsored
St Stephen’s Primary School

St Stephen’s Primary School

Polyroof Products Ltd

A friendly and welcoming school based in Blackburn in the North West of England, St Stephens Church of England Primary School is a place where pupils can develop their skills in a school that is proud of its Christian values and high standards of teaching. The school has been praised for its philosophy of continuous improvement by a recent ofsted inspection, providing a nurturing environment for children.Continuing the high level of teaching facilities was paramount for the school, and after discovering that the gutters and parapets of the building were aged and leaking, it was vital that a solution was found before this caused issues.The ChallengeIn coordination with Polyroof Products Ltd a survey was scheduled to take place at the site to determine the exact nature of the issues and formulate a solution. Upon inspection it was discovered that the existing waterproofing consisted of a single-ply membrane which had become aged with various leaks being reported and localised repairs carried out with not much effect. The underlying build-up consisted of a galvanised steel metal deck and had been coated in plasticol. Once the survey was complete it was clear that the gutters and capping’s would benefit from a high-performance waterproofing system installation, this would protect from further leaks occurring.The SolutionThe System of choice for this project was Protec Xtraflex. Protec Xtraflex is a highly flexible version of the Protec system designed for coating gutters. Its fast curing technology and imperviousness to standing water fulfilled the rapid solution needed to offer durable waterproofing performance for this project. Taking into consideration the information obtained from the survey, a bespoke Polyroof specification was created to combat all of the issues discovered. The chosen Polyroof Approved Contractor to carry out the work on this project was the KSD Group, a contractor with a wealth of experience in the roofing and construction sector.Once all these aspects were in place, work could officially begin. Firstly, it was highlighted that falls and drainage were already present, so the Polyroof specification made use of the existing falls, combining this with the chosen waterproofing system. During this project, there was no need to strip back any of the existing waterproofing. It was made good where required, allowing a smooth substrate for the new system to be bonded to. Once this stage was complete, the area was cleaned and prepared for the new system by removing any dirt and debris. The Protec Xtraflex system was now ready for installation. Firstly, all surfaces that required it were primed, including the single ply existing waterproofing, which required a Polyroof SP Primer 202. During this installation, all lap joints and bolt heads were applied with Polyroof Butyl Tape and Polyroof Butyl Lap Tape, reinforcing these points before application. Pre-formed high-quality Polyroof drip trims were installed to the outer edge of the metal capping, and new flashings were also installed to cover the exposed insulation at this detail.The first coat of Polyroof Protec Xtraflex was applied to the substrate. This consisted of Xtraflex resin and Polymat 450 and was allowed to cure. Due to the rapid cure technology of the system, this only took 30 – 60 minutes, allowing for quick installation. Once complete, the second coat of Protec Xtraflex Resin was installed and allowed to cure.CompletionThe project was efficiently managed by both the contractor KSD Group and regular Polyroof Technical Services visits to ensure that each aspect of the project from start to finish was carried out within the client’s specification, time frame and budget. The project was a great success showing the high-quality work from KSD Group. The customer can now be confident that this new Polyroof Protec Xtraflex membrane will last for many decades to come.
Sponsored
Case Study - Proteus Pro-Felt® - High Street, Polegate

Case Study - Proteus Pro-Felt® - High Street, Polegate

Proteus Waterproofing

Comprising of nine shops and several residential flats, properties 29-47 High Street Polegate required a full roof refurbishment after complaints of water ingress into the residential buildings. Proteus Waterproofing conducted a thorough survey which revealed that the existing roof build up, made up of a timber deck and 2-layer felt, had been previously repaired but was now at the end of its serviceable life.Being a residential building with a combustible deck, protecting individual properties from internal fire spread was a key consideration. Compartment walls were identified allowing Proteus Waterproofing to provide a solution that would meet regulatory guidance relating to the junction of compartment walls and roofs in Approved Document B whilst meeting the needs of the client.Proteus Waterproofing specified their robust reinforced bitumen membrane range of Proteus Pro-Felt®, including a bespoke hybrid insulation approach, where instead of a full replacement consisting of entirely non-combustible insulation, a scheme was designed to meet the requirements above and either side of the compartment walls, offering the client the most cost-effective solution possible that would also mitigate any unnecessary increase of weight loading elsewhere on the roof.High Performance WaterproofingThe waterproofing and existing deck were stripped back and re- decked with 18mm plywood. When removing the existing waterproofing, our approved contractor, carefully recorded the exact location of the party walls as no drawings of the upper story flats were available.Proteus Pro-Felt® SA AVCL was used as a vapour control layer to allow for the application of the hybrid combination of 150mm Proteus Pro-Therm PIR insulation and 150mm Proteus Pro-Therm Mineral Wool insulation. A thermal calculation was undertaken to ensure that the final result met the requirements of Part L of the National Building Regulations. These were both adhered with Proteus Pro-Bond Foaming Adhesive. Proteus Pro-Felt® SA Underlay Plain was laid and finished with Proteus Pro-Felt® Ultima Plus Fireguard Mineral Capsheet, providing the client with a fully waterproofed Part B and Part L compliant roof, guaranteed for 20 years.Proteus Waterproofing worked closely with the Proteus Approved Contractor, to ensure the project was delivered to a high standard.Health & SafetyWhen working on occupied buildings, safety is always of utmost importance, as well as keeping disruptions to a minimum. The Proteus Pro-Felt® range have been tested to the highest European Classification of BROOF(t4), making it the ideal system to use on all buildings, as the risks to residents, property and members of the public are greatly reduced. All Proteus Waterproofing specifications promote fire safe installation methods conforming to the industry lead Safe2Torch guidelines. Proteus also have a range of cold liquid applied membranes which are also BROOF(t4) certified.Long Term PerformanceProteus Pro-Felt® offers high-performance bituminous membrane systems, tested to perform in extreme temperatures and weather conditions, while offering clients a robust and cost-effective waterproofing solution. Proteus Pro-Felt® Ultima Plus range retains its high polymer performance. Its class leading, high quality modified bitumen content allows this flexible membrane to move with the building and ensure long term durability and performance with third party BBA accreditation and guarantees available up to 30 years.
Sponsored
Rockfon® Mono Acoustic enhances The Lantern, London

Rockfon® Mono Acoustic enhances The Lantern, London

Rockfon

The Lantern is the result of a wholesale redevelopment and reimagining of a large eight story building in Euston, Central London. Developer owners Lazari Investments have worked with Marks Barfield Architects to create a stunning scheme which successfully meets the current desire for built inner city environments to offer contemporary and elegant work space alongside areas designed for leisure, relaxation and retail therapy.Rockfon were very pleased to be specified for the project which offers 23,000m2 of mixed-use space including offices, café’s, shops and apartments. In addition there are large terraces and gardens on almost every level.The elegant solution to unwanted noiseAround 850m2 of unique Rockfon Mono Acoustic has been installed throughout communal areas, lobbies, thoroughfares and café’s throughout the building to deliver elegant sound control where the use of reverberant materials such as glass, stone, concrete and steel, added to high foot-fall would result in unwanted noise.8build were principle contractors for the scheme with Pacy & Wheatley Acoustics being responsible for the installation of Mono Acoustic systems. David Booth of the specialist firm spoke about the project, “We are proud of the work we’ve carried out at The Lantern, which presented a number of challenges associated with the myriad of services and fittings which go to make-up sophisticated contemporary mixed-use architecture. “The grid work and Mono Acoustic were installed to a wide variety of abutments in spaces throughout the building including within the large atrium, working around the many finishes and fire curtains to the front face of the lobby and glazed screens to either end. Fitting the ceiling to accommodate a stunning feature Italian light fitting suspended from 130 rods fixed to the structural slab called for exacting tolerances and really demonstrated the system’s versatility.”Seamless performanceMono is a ground-breaking product which combines a seamless ceiling with high performance characteristics. Ceiling tiles are installed and completed with acoustic render creating a smooth, monolithic surface which not only offers high sound absorption but also provides high light reflection and light diffusion, reducing the need for artificial light.The system allows for incorporation of lighting, audio and other mechanical systems whilst delivering Class A2 fire protection. It also offers dimensionally stability at up to 100% relative humidity and can be installed in temperatures ranging from 0˚C to 40˚C.Fully recyclable, all Rockfon ranges are made from a core of naturally occurring, non-hygroscopic and non-combustible stone wool. Their surfaces provide no sustenance to harmful micro-organisms, embody high humidity resistance and are impervious to most environmental pressures. With blue chip corporates including Fujitsu, Siemens and Bauer Media occupying space within the development, attention to detail was vital in helping create the perfect setting, which is known to aid productivity while contributing to employee wellbeing and retention. Acoustic control is also vital within places where people dine, with research showing customers are less likely to return to noisy restaurants. Commitment to wellbeingRockfon Specification Manager Alan Davies talks about the brand’s commitment to the sound control and wellbeing, “We are proud to be among a growing number of manufacturers to have its products assessed by Quiet Mark – the independent global certification programme associated with the UK Noise Abatement Society charitable foundation. Its international award programme recognises excellence in low-noise products, technology and solutions to unwanted noise - visit www.quietmark.com
Sponsored
7 Holbein Place

7 Holbein Place

INTRAsystems

Making an Entrance at London's leading net zero CAT A ProjectWithin London’s Royal Borough of Kensington and Chelsea, Holbein Gardens is a remarkable building just off Sloane Square that seeks to lead the way for companies seeking to achieving net-zero goals. Blenheim House Construction (BHC) helped realise Grosvenor’s vision to turn a tired old 1980s building into a net zero exemplar.A bare bones CAT A project, the site boasts quadruple environmental certification, including BREEAM Outstanding and WELL gold accreditation. Naturally, market-leading sustainable Entrance Matting was required to echo the space’s green ethos.INTRAsystems was the obvious choice thanks to our extensive range of sustainable products that help meet WELL and BREEAM standards.A sustainable successAcross the entire scheme, suppliers were challenged to use the industry’s most innovative, sustainable products, aiming at the highest levels of recycled content and recyclability.INTRAform DM Low Profile was chosen in the unique wood effect finish, which ticks all the boxes including validated data on embodied carbon and packing a double punch of sustainability and performance. Cool black Elite fibre inserts are made from 100% post-consumer waste with extremely low whole-life carbon emissions.Specified in 2020 but delayed through COVID, installation was completed in 2023. INTRA liaised with contractors to reschedule site surveys once pre-works were completed sufficiently for the entrance area to be assessed accurately. This was particularly crucial since the Entrance Mat sits in a lower position surrounded by steps and a raised floor level.Beauty and Brawn - Wood-effect Recycled Aluminium for Sustainable Entrance MattingThis smart wood-effect finish was new to the market back in 2020 but the client was confident it would meet their quality demands based on the many successful projects we’ve collaborated with them on across a variety of settings.Today the faux wood variant is a market-leading product that beats similar looking products made of real bamboo in terms of strength, longevity and good looks. Real wood systems don’t handle excessive moisture well, so the wrapped aluminium is ideal and more sustainable too. Read our bamboo vs aluminium blog to learn why.Fir for purposeNext door to London’s Sloane Square tube station, the 25,000 square feet office building is designed to house 2,500 office workers plus service staff and visitors. The entrance is immediately off the street with a small canopy and no draft lobby, so the matting will be exposed to direct and prevailing rain.Technically, INTRAform DM Low Profile was an ideal choice for a Cat A project like this as it can cope with high footfall and provides more flexibility than other systems. This 12mm profile variant can be surface mounted or shallow recessed for easier integration with whatever finishes the future tenants choose. And the interlocking plank system makes installation and onward retrofitting easy, if required.Entrance Matting Triumphs in Durability and Moisture AbsorptionINTRAform DM, with the Elite inserts will cope with rain with ease thanks to being happy in external (zone 1) and internal (zone 2) locations. It is typically found in shopping centres and office complexes as it’s hard-working and hard-wearing with excellent moisture absorption and dirt removal.The closed construction format and extra wide inserts make cleaning and maintaining INTRAform DM a breeze too. This will be essential to protect any materials chosen for the expansive lobby of this high-spec building.
Sponsored
Fulfilment and Distribution Centre - Barcelona, Spain

Fulfilment and Distribution Centre - Barcelona, Spain

Juta UK Ltd

A new fulfilment and distribution facility in the centre of Barcelona utilising high end robotic technology is treated to future proof gas protection with GP® TITANFLEX® protective barriers.
Sponsored
Harris Calnan Construction Company (HCCC) - FireMaster Fire Curtains

Harris Calnan Construction Company (HCCC) - FireMaster Fire Curtains

Coopers Fire Ltd

Coopers installed and commissioned two FireMaster® Plus fire curtains, the first to protect the property from fire and smoke migrating from the kitchen whilst the second to protect the internal balcony from smoke and fire travelling between floors. Both fire curtains provide 2 hours fire and insulation zone protection and were installed into the ceiling to remain hidden from view until deployed by a fire alarm.
Sponsored
Yeoman Shield Proves to be the Right Treatment for Halton Hospital

Yeoman Shield Proves to be the Right Treatment for Halton Hospital

Yeoman Shield, trading name of Harrison Thompson & Co Ltd

Yeoman Shield have recently supplied and installed wall and door protection in the new Urgent Care Unit at Halton Hospital Runcorn.The unit will be busy catering for people in the Runcorn area and is hailed as a one stop shop offering an alternative to A&E for a range of minor injuries and urgent medical care.“The new Urgent Care Unit has been adapted from the old Minor Injuries Unit which has under gone alteration and redecoration with new and refurbished doors fitted. We were keen to protect the new finishes from the damage which can be caused by the everyday use of a busy hospital department.” Said Lee Bushell, Building Surveyor at Warrington & Halton NHS Trust.Yeoman Shield products were installed by their directly employed fixing team to the corridors and cubicle areas in the unit.Guardian Handrail was fitted to protect the walls along the corridors and waiting areas in Aqua Blue with an attractive contrasting insert strip in Mid Grey. An Ultra 60 Protection Rail, also in Aqua Blue, was included at low level to protect the skirting and wall from damage which can be caused at this height from wheelchairs and trolleys.Some of the doors in the unit required replacement and Yeoman Shield fire rated door protection panels and door edge protectors were fitted to all doors to protect from costly damage reoccurring. The addition of Yeoman Shield door protection helped to add uniformity of colour and style to the mixture of the new and old doors.Aqua Blue FalmouthEx wall protection panels were installed along the cubicle area corridors and in the cubicles themselves protecting from damage which is caused by the movement of equipment and trolleys.A Yeoman Shield Clapping Lath was applied to the double swing doors of the X-ray room. The lead lined clapping lath was fitted to the inside of the room doors to prevent any leaking of X-rays through the gap between the meeting edges of the door set.“I am very pleased with the way that the Yeoman Shield products look and from past experience know that these products will help to keep the new unit looking smart for some time to come.” Concluded Mr Bushell.

Showing 433-442 of 442

Feedback