"composite rigid sheets"

DUCO contributes with sun protection to the £78m project for The University of Manchester. The architectural sun control DucoSun Ellips 200 mm, supplied by Contrasol, was chosen for the Fallowfield campus. The solar shading is so much more than decoration.About the Fallowfield CampusThe Fallowfield is a student accommodation with 8 multi-storey blocks including a Warden’s flat and Energy Centre, amenity hub, landscaping and external works. Each residence will have 10 bedrooms per floor with ensuite bathroom pods and a shared kitchen. 1,122 student rooms are spread over the blocks with a combined floor area of 32,020m2. The Fallowfield Campus is the main residential campus of the University of Manchester. It’s a vibrant place where thousands of students live alongside residents – creating e a real sense of community. The mix of shops, cafes, bars and a frequent bus service to and from the city centre makes it an ideal location to live.Construction detailsThe blocks are constructed using pre-fabricated lightweight steel framing system panels which provide structure to the building when used along with composite concrete floors. External materials are predominantly buff brickwork with feature elevations picked out in charcoal fibre cement slate roofing and cladding. Study bedrooms incorporate built-in storage and furnishings and a high specification pre-fabricated GRP en-suite shower pod.  Solar shading is much more than decorationThe vertical solar shading system DucoSun Ellips was chosen for this project and supplied by Contrasol. This solar shading system, in which a blade with of 200 mm was chosen, guarantees not only maximum daylight, thanks to the optimal inclination angle and number of louvre blades. At the same time, DucoSun Ellips 200 ensures that the sun’s rays do not get a chance to heat up the Fallowfield interior spaces directly. The vertically installed solar shading system offers maximum privacy while maintaining the view outside.

High performance resin for mortuary flooring areasAs with many high-care environments, mortuaries and post-mortem rooms require high performance flooring to cope with extremely demanding conditions. Any floor finish must be slip-resistant, hygienic, totally impermeable and incredibly durable.Traditional mortuary flooring specificationTraditionally, mortuaries and post-mortems rooms have utilised vinyl sheet or terrazzo floor tiles. However, both have inherent problems such as failed joints, cracks and poor slip resistance making them less than ideal. The failure of these traditional finishes can allow water and other contaminants to penetrate into the substrate below, which creates significant hygiene challenges.In addition to hygiene challenges, failed floors can create health and safety issues such as trip hazards and any repairs will be time consuming and disruptive.High performance mortuary specificationDegafloor have developed an alternative, high performance flooring specification, ideal for post-mortem and mortuary flooring. The Full Broadcast and QTA systems are ultra durable, seamless and highly slip-resistant finishes that can be easily cleaned.Both offer a profiled surface finish that provides outstanding slip-resistance and durability. Despite the surface texture, Degafloor flooring systems are easy to clean and and the seamless nature of these floors results in outstanding durability, avoiding contamination issues.Degafloor high performance flooring systems can bond to a variety of substrates, and cure both chemically and physically within 2 hours of installation. This ensures that every solution we deliver can be installed extremely quickly and cost effectively, resulting in minimal disruption.Our mortuary flooring projects include; Peterborough City Hospital, Royal Devon and Exeter Hospital, Barnsley General Hospital, Luton and Dunstable Hospital and Basingstoke & North Hampshire hospital.

PROJECTSecondary school in Grüze 5, Dübendorf [CH]COMPLETIONOctober 2023ARCHITECTStutz Bolt Partner Architekten AGPRODUCTSTANGENTA Y100 luminaireLight distribution: 2 x 60°; light colour: 4000 K; DALI dimmable; CRI > 80; LED: 3 x 34.5 W; dimensions [L x W x H]: 1,550 x 100 x 100 mm [72 units].S7 RHOMBOS TAIFUN expanded metal ceiling system1.5 mm thickness of black sheet; mesh size: 44 x 12 x 3 x 1.5 mm; dimensions: 980 x 790 mm and 1,650 x 680 mm; powder-coated in RAL 9016 matt [576 units] The new extension to the school building at Dübendorf-Schwerzenbach blends seamlessly into the existing complex and, with a lightness of design touch and its versatile range of usage options, it takes a big step towards modern school infrastructure. This building has been designed to enable it to be adapted to suit changing requirements in future. The school building is constructed on a double gym facility, two thirds of which are recessed below ground level, receiving natural daylight through a strip of windows at the top of its walls. When needed, the TANGENTA-Y100 luminaires supplied by durlum can be switched on. These deliver high lighting intensity combined with superlative lighting efficiency. These luminaires are discretely integrated in the S7 RHOMBOS TAIFUN expanded metal ceiling system with tested ball impact resistance to fulfil the special requirements of sports hall. Combined with its small mesh size, the white, powder-coated ceiling imbues an aesthetic appeal to this hall, which is also used by the general public. All entirely in sympathy with the architectural vision.

Also the largest public cultural space in Europe, the new 35,000m² Library of Birmingham replaces the old Central Library and is seen by Birmingham City Council as a flagship project for the redevelopment of the city.Designed by architects Mecanoo, working with multi-discipline engineers Buro Happold and main contractor Carillion, the multi-tiered roof of the library features two garden terraces which have both contributed to the BREEAM Excellent rating.Radmat Approved Contractor Prater delivered a roofing solution that is BBA Certified to last ‘the life of the building’. Consisting of Radmat PermaQuik PQ6100 Hot Melt Monolithic waterproofing membrane, root resistant Cap Sheet and ProTherm inverted roof insulation, the entire roof was electronically tested for integrity prior to the installation of aluminum powder coated cappings to the perimeter roof upstands.Once the installation of the 7,500m. of PermaQuik PQ6100 roofing system on the roof and ground level podium deck was signed off by a Radmat Technical Adviser, Prater brought in specialist green roof contractor Frost Landscapes. They then carried out the installation of the complex intensive green roofs, at levels 3 and 7, which were created to attract local wildlife and to offer visitors a pleasant environment to enjoy all year round.Combining durability and flexibility with independent verification of life expectancy and a market leading guarantee the PermaQuik PQ6100 Hot Melt Monolithic waterproofing system is set to deliver exceptional performance befitting of the uniquely designed structure which has set a remarkably high standard for library design.With Radmat’s high performance roofing solution providing weathertight protection for years to come, the Library of Birmingham looks set to not only form the catalyst for further regeneration within the city but also how future libraries are designed and perceived by the user.

When the Coleg y Cymoedd (translated meaning is the College of the valleys) in Wales needed to totally refurbish the flooring element of their campus in Ystrad Mynach (near the town of Caerphilly), they turned to international flooring specialist Gerflor to supply over 1000m2 of flooring for numerous areas and spaces throughout the campus. It was a project that provided Gerflor with the perfect platform to showcase a raft of high-quality flooring solutions ideal for the concerned demanding education environment.Tony Thorne, Gerflor Sales and Specification Manager - South Wales commented, “This project started at the specification stage with the Architects Austin-Smith: Lord. Over several meetings, we looked at a number of products to be used in various areas of the building scheme. The installation at the Ystrad Mynach campus is an outstanding example of how a mix of Gerflor innovations can achieve world class results. Mixing gym tiles with sheet vinyl, safety flooring and LVT, yielded incredible results for this college refurbishment project.”Kate Thomas, Director Austin-Smith: Lord commented, “The refurbishment project, part-funded by the Welsh Government’s 21st Century Schools and Colleges Programme, formed part of the college’s plans to continually invest in new facilities and equipment that will allow learners across its catchment area to have access to the latest training opportunities and career paths.”Mark Bond, Estimator and H&S Manager at Floor Furnishings commented, “The client is extremely impressed with the end results. We regularly work with Gerflor products and recommend Gerflor where suitable, in line with our client’s requirements and expectations. Gerflor’s staff are particularly skilled in being able to work in collaboration and alongside both the end user clients, as well as contractors in achieving an excellent final result that is pleasing to the client and meets the complicated design brief.”

In Carpi, in the province of Modena, Atlas Concorde was chosen for the porcelain stoneware floors and white clay wall tiles of a luxurious private residential villa featuring spacious interiors and an equally large outdoor area. Six ceramic collections from the company were used to furnished the rooms of the house, employed in different shades depending on their role.Those who decide to enjoy the interior of the residence find themselves surrounded by elegance. Thanks to modern furnishings and refined colours, the atmosphere is a fresh combination of comfort and luxury.An important contribution is provided by Dwell, the ceramic inspired by the world of brushed concrete and synthetic resins, the perfect ally of contemporary and original architectural projects.Also enriching the interior is Seastone, here chosen in the Greige shade and in the 22.5x90 cm size. Defined by a simple look and multiform, varied traces of fossils, the surfaces of Seastone combine the uncompromising natural beauty of stone with the superior technical and functional performance of porcelain stoneware. With meticulous research and the expert use of mixtures of earth and flakes of different colours and sizes, this ceramic collection gives the rooms a natural, contemporary European flavour, mixing refined design, evocative materials and a guarantee of reliability.Also included in the interior design is Trust, in the Copper colour and Brick composition. With its earthy nature and rich details, stone invades the space, creating enveloping and suggestive atmospheres. In particular, Trust recalls quartzite and Luserna stone with its surfaces featuring intense variations in colour and texture, obtained through the use of the most modern and sophisticated ceramic technologies.Marble and wood alternate in the outdoor floors of the villa.The former thanks to Marvel Pro porcelain tiles, the highest ceramic expression of marble that effectively meets the needs of contemporary design. Installed in the dark Grey Fleuryand in the LASTRA 20mm slab, Marvel Pro stands out for its intense veins, natural shading and refined beauty.In contrast, the warm embrace of wood comes to life thanks to Doga, the collection that evokes sanded slats of oak, and Etic, the family that combines intense natural character and authenticity in a wood effect full of allure and history.

Lorton Park development has been designed and built with energy and water conservation in mind. With a particular importance placed on the selection and quality of the materials used, Catnic’s innovative TBL was specified for all 46 luxury properties.BRE certified, the Catnic TBL range delivers industry leading linear thermal transmittance Psi values of 0.02 to 0.05 W/mK and safe working loads in line with Catnic’s existing Cavity wall lintels.Chris Watts, Sales Manager at Jewson, worked with Mr Hidari on the product specification,“After comparing different lintels on the market it became clear that Catnic TBL’s were best suited to the specific project requirements.“Due to the medium density concrete blocks being used onsite, AKI Ltd needed a product that could meet its thermal performance requirements and easily achieve the build’s load requirements – the composite design of the TBL made it the perfect choice.”The specifically designed flat top of Catnic’s Thermally Broken Lintel provides a simple, consistent junction with the cavity wall insulation. This removes the reliance on site workmanship, reducing the risk of a ‘performance gap’. There are also no brackets connecting the inner and outer leaf of the lintel and therefore there are no additional point thermal bridges that need to be considered.The large scale development project also benefited from Catnic Lintel Advance Scheduling System (CLASS). Through the fully comprehensive scheduling service, Catnic’s expert team created a concise document which detailed lintel descriptions, price, delivery time and a guaranteed structural accuracy.“This has been a huge, complex project and we needed a product that could deliver on the specific structural and thermal requirements,” commented Mr Hidari. “As the only lintel on the market with a complete thermal break, it seemed like the ideal product. I was particularly impressed by the Catnic team who provided us with a full design and specification for the entire development.”For further information on Catnic’s Thermally Broken Lintel range, please visit https://catnic.com/products/lintels/thermally-broken-lintels/overview

Gripsure decking has been used in the development of a new sales pavilion at Swanwick Marina in Southampton.The state-of-the-art building, which opened in the summer, provides 14 high-quality units, which are home to some of the biggest names in the boat business, including Ancasta, Fleming Yachts, MiCats, Nautor’s Swan, Nordhavn, Pearl Yachts, Princess Yachts, Sanlorenzo Yachts and Sunseeker International.The sales pavilion, known as The Saltings, uses our MOSO Bamboo X-treme® with Gripsure decking, creating an attractive and slip-resistant space for berth holders.The profile was chosen for its durability and style, which is very much in keeping with the overall look of the marina. The range is also a sustainable alternative to tropical hardwoods and composite products, boasting best in class for its environmental credentials, strength, stability, and longevity, whilst achieving a Euroclass B fire rating without the need for external treatment.The installer was Amiri Construction and the order for the decking was processed through Covers Timber and Builders’ Merchants in Gosport. Covers Sales Representative Lynn Ward said: “It was a huge project and the final result looks amazing. The bamboo decking that was used is absolutely top spec and very hardwearing. It will definitely do the job.”She added: “Gripsure were helpful to the nth degree throughout the project and really supportive. I’ve already told other people how great they are to work with.”The completion of the sales pavilion was a key stage in the £8 million regeneration of Swanwick Marina. Other stages include the development of a new restaurant and a berth holders’ lounge.Speaking after The Saltings’ opening ceremony in June, Pete Bradshaw, Premier Marinas chief executive, said: “Swanwick’s new sales pavilion provides a unique representation of so many major global brands, it is now the primary destination for motor yacht sales in the UK. “This project has taken many years to deliver, and we are proud of what has been achieved.”Set in the quiet upper reaches of the Hamble River, Swanwick Marina offers 24-hour access to the cruising grounds of the Solent.Images courtesy of Amiri Construction. ©2022 Amiri Group.

A sense of community, abundant greenery and lake views on the roof terrace for all residentsThe housing fair is held annually in Finland. In 2021, it will be held in a scenic location in Lohja, Southern Finland. An interesting partnership quarter will also be put up in the fair area, where a sense of community has especially been taken into account in the planning. A block of 34 modern and energy-efficient apartments. The principal designer of the site is the architect Sasu Alasentie from UKI Arkkitehdit.”The idea behind the whole quarter is a sense of community. The flats in the building do not have their own saunas, but instead a communal use sauna will be constructed on the roof terrace. You can see the wonderful lake scenery from the roof and by utilising the roof terrace we wanted to ensure views of the lake to all residents. The yard areas of the quarter are fairly compact, but the roof terrace creates more greenery and communal outside areas for all the residents to use. We also hope that this will increase the residents’ team spirit and sense of community,” says Sasu Alasentie about the basis of the planning. ”On the roof terrace, we will also build an individual planting box for each resident, where they can cultivate herbs, flowers or whatever plants they want. A small summer kitchen corner and dining area will also be built there, as well as hanging chairs for lounging around. All in all, the area will hopefully become a communal, green oasis to spend time in, for all the residents,” says Sasu Alasentie. ”When we were choosing materials for the terrace, it was important to us that they would be in keeping with the building’s ecological nature and energy efficiency. Together with the contractor, we decided on the UPM ProFi Piazza composite for the terrace material. What appealed to us about it was particularly its durability and that it was easy to look after. Naturally also the fact that it’s made of recycled material, which fits well with the environmentally-friendly ideology of the whole building. I believe that in future projects, environmental friendliness and materials made from recycled materials will become even more popular,” says Sasu Alasentie.  

ChallengeThe much acclaimed architect Zaha Hadid created the design for the Riverside Museum, which has already been dubbed ‘Glasgow’s Guggenheim’.The new riverside Museum provides an exciting new home for Glasgow’s transport collection. The development has a riverside location on a site where the River Clyde meets Glasgow’s other main river the Kelvin, and is adjacent to Glasgow Harbour.The dynamic new Riverside Museum displays Glasgow’s rich industrial heritage, which stems from the River Clyde. The Tall Ship is berthed alongside the Museum, creating a fantastic experience in this stunning setting.The brief for design and build roofing specialist Varla (UK) Limited was to find a flexible insulation that could meet the demanding U - value of 0.20 W/m2K that was continuous over both the walls and the complex 18,000 square metre roof. The Glasgow Museum of Transport is a complex, heavily engineered design and was the first major UK project for the renowned architect Zaha Hadid.Specialist Roofing contractor, Varla (UK) Limited started the search for a suitable material by contacting many insulation suppliers and holding supplier seminars at Varla’s Chester offices, challenging suppliers to propose a solution to meet the demanding specification for this unique project.SolutionVarla (UK) Limited chose to use Knauf Insulation’s FactoryClad Roll 32, a flexible insulation that meets the demanding U-value of 0.20 W/m2K across both the roof and walls.Rigid foam boards were ruled out early on, as they could not be fitted to the building’s complex curves. There was also a limited cladding zone that could not be altered. Many types of insulation were considered, but glass mineral wool roll provided the best thermal efficiency. The key to Knauf Insulation’s products being specified on this project was its ability to provide in-depth technical support, including complex three-dimensional heat flow modelling calculations. This allowed Knauf Insulation to produce a solution that met all of Varla’s insulation requirements by using a double layer of 100mm Knauf Insulation FactoryClad Roll 32. This is a flexible, lightweight roll of resilient Glass Mineral Wool with exceptionally high tear strength and a thermal conductivity of just 0.032 W/mK.In addition, Knauf Insulation FactoryClad Roll 32 is ideal for limiting the spread of fire since it holds a Euroclass A1 reaction to fire classification for non-combustibility and will not burn. Nor will it give off toxic smoke or suddenly ignite in a fire due to ‘flashover’. For public buildings such as this, superior fire performance is crucial.Once Varla (UK) Limited had decided on Knauf Insulation, it leaned on them heavily for technical support, utilising the unique 3D heat loss calculation support service, which ensured the correct product thickness was specified to meet the demanding project requirements.

Halamar acquired this site in Beaconsfield. Planning permission was granted for a new build two-storey detached dwelling, replacing the existing residential property constructed in the 1900s.A comprehensive set of architecture plans specified high quality elevations with a ‘classical’ Georgian-esque design. The sub-contractors, B-Bespoke Design & Build Ltd, required Keystone’s brick slip flat gauge headers above multi-pane sash windows and an intelligent bespoke interconnecting brick slip splayed bay system across two floors on the side elevation.ChallengeThe design and scale of the building, along with the arrangement of fenestration and opening detailing, required the careful skill and use of sympathetic materials to ensure the development enhanced the special character of properties in close vicinity.B-Bespoke Design & Build Ltd considered the volume of decorative window openings and availability of local skilled bricklayers when considering the most effective and efficient approach to the build schedule.SolutionAn offsite construction method was deployed by the sub-contractor. Keystone’s technical team were contacted to design brick slip flat gauge headers accommodating brick spans between 1135mm to 1472mm. Each with a 70-degree end skew, 375mm high face brick and 102mm soffit return whilst also incorporating keystone stone headers above specific windows. The prefabricated lintels improved the allocation of time and resources elsewhere on site allowing the build to be completed to a high interior specification still with an exterior full of character.The rigid symmetrical design and gracious classic proportions create a generous sense of space and natural light, with stunning traditional period features created above each window opening. The interconnecting brick slip splayed bay system spans 1695mm and provides a stark contrast to the boxy room profiles often seen with a Georgian home. This architectural feature accommodates the high ceilings and desired aesthetics whilst providing effective structural support to withstand roof and masonry loads above.A consignment of bricks was collected from site and each brick cut and bonded using a BBA approved construction adhesive to the load bearing lintels offsite. The patented perforated lintel design allows the adhesive to squeeze through the perforations and form a ‘mushroom’ on the inside, providing a mechanical lock between the steel lintel and the brick slips.Testimonial“For the new build Georgian styled home, we sourced over thirty bespoke prefabricated brick slip feature lintels from Keystone as well as a unique interconnecting feature brick splayed bay system. As a smaller building contractor, we saved time and money using Keystone Lintels. We did not need to source additional skilled labour on site to create and replicate the intricate brick detailing which included Keystone stone headers. Ultimately this resulted in a faster build schedule for the client.”Nirmal DhaliwalSite Manager at B-Bespoke Design & Build Ltd

Cornwall County Council was responsible for upgrading and renovating an existing stairway to Blue Buoy Beach at Porthleven. A specification and sample were given to the Council, who approached three different fabricators/installers, all of whom came to PcP for an engineered safety solution on treads/landings.Insteel Industries is one of the largest architectural fabricators in the county of Cornwall. Insteel successfully won the contract to supply and install, In looking for the right partner who could offer loading criteria and technical information that complied with the relevant standards.Project criteriaThe Blue Buoy stairway project specification initially requested stainless steel and open-mesh with an alternative for a “Heel-proof version with a 20mm gap and a durbar plate for a slip-resistant surface.The SolutionPcP proposed a galvanised alternative instead of stainless steel but 140 microns and anti-slip nosing for a slip-resistant surface. The proposed solution was cost-effective, safe, durable and matching budget criteria.PcP proposed the 05m nosing as it has a much better slip-resistant on the front edge. In addition, PcP suggested a 33/8 mm pattern would be more suitable for heels than a 20mm gap.Insteel Industry forwarded a drawing/specification sheet to Cornwall Council, who then accepted the 33/8 mm pattern. However, there were concerns that we couldn’t offer 140 microns with our 2/3mm bars.PcP provided a sample that was Shotblast before galvanising with six localised readings of coating thicknesses. Insteel Industries presented the product sample to the council architect for final approval.The resultThe stairways are suitable for access with all types of footwear and pets also to access the beach. The 05m nosing on the treads comply with the slip-resistance recommendations of Bs7976 which are a superior alternative to the durbar plate initially specified. Shotblasting offered an increase in the thickness of galvanizing treatment and enhanced corrosion resistance, providing a more durable product. Perforated rear riser allows water to pass through when storms and high waves hit the staircase.

Recently we have received a review from a customer that used Polytrol to revive their Ifor Williams horsebox.Andy was looking to revive the faded colour of his Ifor Williams horsebox and decided to try a sample of our Polytrol colour restorer. He even supplied us with before and after images so we can see how well it worked.Here’s what Andy had to say;I have been an Engineer all my life and have used many products that purport to do unequalled repair or unrivalled transformations. But I cannot remember ever being so impressed with a product.After using the sample pot of Polytrol colour restorer I thought to take some pictures of the project. The whole trailer was thoroughly cleaned with a pressure washer along with the roof and fibre glass front roof panel. Mould and algae were removed with a scrubbing brush and Cillit Bang mould remover.The side panels are painted flat aluminium sheet which had faded quite considerably over the years. Their appearance was also marred by a previous owner putting transfers on them, which I removed only to discover a darker silhouette, which further spoiled its appearance.To the painted panels, I applied Polytrol liberally with a brush and then left for 15 Mins. After this, I then used a cloth soaked with Polytrol but with excess squeezed out, to smooth out the excess on the surface and provide an even light coating to dry. I treated the plastic mudguards the same way with fabulous results.For the “dimple” surfaced aluminium roof and front panel, I found a Scotchbrite pad and soaked it with Polytrol. I then wiped it off once again with a saturated cloth and left it to dry.I applied the Polytrol on a pleasant day with no excessive sunshine and all was touch dry within 2 hours. By the following day it was perfectly dry and ready for new OEM Decals.The pictures show it all, what an outstanding transformation.

Battersea Dogs and Cats Home in London, the best-known animal sanctuary in the world, is currently undergoing the biggest development in its 154-year history - a £5 million scheme delivered by main contractor, Sir Robert McAlpine. The development will bring the charity’s existing buildings and facilities into the 21st century and will include a new build, state of the art veterinary hospital which will be protected by an innovative new waterproof membrane – Cold Melt® from Proteus – a seamless application designed to work in harmony with the roof infrastructure and so tough that it has been BBA certified to last for the lifetime of the building.Quality Control An integral part of this transformation is the built up roofing system of 1,200 square metres of Cold Melt®. Applied by the Proteus Licenced Contractor, a 5 layer built up system was employed to offer a bespoke specification tailored to the client’s needs and budget.The built up system consisted of a layer of Cold Melt® Proteus’ own innovative, cold-applied liquid membrane, over which an insulation layer of Proteus Pro-Therm XPS was laid. The Licenced Contractor then added a separator sheet of Proteus Low-K followed by an attenuation mat and then three different finishes in three different areas of the roof – paving slabs, a green roof and decking.Health & Safety Proteus’ liquid applied systems are cold installed and therefore negate all the elements of fire risk when working in confined spaces. Of particular importance was the low odour that Cold Melt® exhibits, meeting all the health and safety criteria necessary to protect both the Licenced Contractor’s operatives and the dogs and cats home’s residents.Long term performance Cold Melt® incorporates recycled rubber-crumb and other organically grown products and when covered, creates an elastomeric, seamless and cold applied membrane which has a life expectancy longer that the design life of the building on which it is installed.

The Ascent Aluminium Roof Access Steps were specified to meet the clients requirement to create a safe access route up & over the “saw-tooth” roof for maintenance personnel. In this instance the Ascent steps were specified for use with an adjacent MSA Latchways climb-latch fall protection system. If collective protection is required handrails can be supplied to one or both sides of the steps. The Ascent Aluminium steps were specified for this project by Eurosafe Solutions Ltd a specialist fall protection company who also installed steps. The Ascent Aluminium walkway steps are tested for use on the aluminium standing seam roof and are secured back to the roof sheet using a proprietary support clamp. The Ascent aluminium walkway is designed in accordance with BS EN 516:2006 Prefabricated accessories for roofing, BS 4592, Industrial Type Flooring and stair treads, BS EN ISO 14122-3 Stairs, stepladders and Guardrail, BS 7976-2:2002+A1:2013 Pendulum slip resistance. And is manufactured under ISO 9001 and CE 1090 factory production control procedures, creating a walkway that is CE / UKCA compliant.The walkway steps can be configured with a handrail to withstand a loading of either 0.36 kN (general duty) or 0.74 kN (heavy duty) and can be supplied with an optional toe-board if required. The system can achieve these loadings without the need for additional bracing, allowing the walkway to be placed against the area to be accessed. UKCA / CE marked. Designed & Tested in accordance with BS EN 516:2006 Class 1 Type C. Designed & Tested in accordance with BS EN ISO 14122-3:2016 where a handrail is fitted. Designed & Tested in accordance with BS 4592-0:2006+A1:2012 for loadbearing and BS 7976-2:2002+A1:2013 for anti-slip. With or without handrail.Standardized modular system roof walkway system. Can be supplied with a range of fixing kits to suit different roof profiles.

The ProblemWe were approached in 2020 by James Tough of Butco and his team to help develop a low surface temperature radiator that would survive the ‘kick test” for Dignus healthcare.After an initial meeting and various site visits to Dignus scheme, we recognised the problem they were having with their existing radiators and controls. They had damaged and dangerous casings, broken TRVs and endless replacements.Butco had exhausted the market trying to solve the problem posed by Dignus and found other manufacturers could not fulfil all the requirements of the customer.The remit posed was in brief:A robust cover to withstand the ‘kick test’To meet all of the regulations and achieve high outputsTo be compact and discreet. They didn’t want an institutional-looking coverNot to be cost prohibitedOur SolutionButco reached out to Towelrads, who supply LST’s and other radiator products to the UK market. Upon understanding of the requirements, we investigated the possibility of producing a more robust casing with our UK Fabricator Adcam, based in the West Midlands. Straightaway Adcam produced a sample of the LST casing utilising a 2mm thick steel sheeting, rather than the 1.5mm industry standard. This proved a viable option upon testing and was put forward to the client. On the back of this successful project for Dignus Healthcare, Towelrads now offer 2mm and even 2.5mm thick casings as bespoke options in their LST range.A sample was sent to Butco to test and was approved by the customer to cover all items above.The bespoke LST’s were manufactured to match a sample site in Crown Lane, Sutton Coldfield. These have been installed and to date, there have been no issues with the covers, radiators, or internal controls. We are working on other schemes with Dignus and have been able to offer this product to other clients.The process of testing the radiators and running them on a sample site has allowed Towelrads to promote these further. It was thanks to Butco’s enquiry that made this possible.

Falco recently took to the design, manufacture, supply and installation of a bespoke cycle hub based on the traditional FalcoLok-500 design. Installed at Anson House, south Westminster, in view of the River Thames, the new cycle hub has been coupled with the FalcoVert-Pro cycle rack to provide secure accommodate for up to 24 bikes.Installed on behalf of Westminster City Council, the new cycle hub features electrogalvanised perforated sheet cladding, powder coated in a Jet Black RAL colour, along with a secure access system.The whole shelter is a bespoke contemporary design of the classic FalcoLok-500 shelter, which features clean lines through the glass cladding and supported by stainless steel glass clamps. The steelwork is hot dip galvanised to BS EN ISO 1461 and also meets UK structural design laws with EN 1090 accreditation. Rainwater is collected via innovative integral gutters as part of the roof system and a bespoke bund ensure that the cycle hub is weather proof!The cycle hub was commisioned to help reduce congestion and provide greater cycling accessibility for residents of Anson House.The FalcoVert-Pro as shown here at Anson House, is a space saving cycle rack design ideal for highly popular densities such as stations, cycle hubs, shopping centres, high streets and car parks etc. Bicycles are parked semi vertically with both front and rear wheels located in a custom designed trough.Falco cycle hubs can also incorporate a world of features including; smart LED lighting, green sedum roofs, CCTV and Help Point facilities as well as numerous other cost-effective features for the cyclist such as lock holders, helmet lockers, seating and bike repair facilities. For more information about the FalcoHub cycle store, a demonstration of the FalcoSmart app-based lock, the FalcoPod bike hangar or any other Falco product, then please speak to one of our friendly customer service staff on (01538) 380080.

Project Name: AMRC - Advanced Manufacturing Research Centre North WestLocation: Samlesbury, LancashireMain Contractor: Cartwright PickardCompletion Date: 2021Total Cost: £11mServices Provided: RIBA stages 1-6, Architectural DesignAwards Received:Finalist in BCO Northern AwardsBest Commercial Development in the North West at RICS AwardShortlisted for Project of the Year at Construction News AwardsLancashire Project of the Year at North West Construction AwardsSystem Supplied: Bespoke Fabrications, LandMark I, SnapLok Capping, Soffits, Window LinersFusion Facades, along with AMS Cladding Limited and the supply chain, provided a high-quality facade for the University of Sheffield's Advanced Manufacturing Research Centre North West (AMRC) project. Despite the challenges posed by the global pandemic, Fusion Facades was able to adapt and deliver exceptional service.The AMRC is located at the entrance to the Samlesbury Aerospace Enterprise Zone and features a modern workspace with a flexible high-tech workshop. To blend the 48,000 sqft building into the rural surroundings, lightweight bronze metal cladding was used over a landscaped bund.As a flagship research centre for advanced manufacturing, the AMRC had to meet the highest environmental standards. The office and seminar rooms feature horizontal glazing slots with projecting cappings and perimeter framing for passive solar shading. Reflective solid panels are used within the curtain walls to reduce solar gain while retaining the articulated openings that distinguish the office and seminar rooms from a nearby main road.A neutral colour was chosen to catch the warm tones of the morning and evening light while subtly defining the different internal uses. To break down the mass, junctions between the sheets are articulated with bronze fins denoting where the structural grid occurs internally.Overall, the AMRC project has received numerous accolades and is a testament to the outstanding work done by Fusion Facades and their partners in delivering a high-quality, environmentally sustainable research facility.

FORBO’S MODUL’UP VINYL CREATES WELCOMING MATCH-DAY SPACE A unique hospitality space located in Cardiff’s iconic Principality Stadium, the Riverside Terrace is notable for its move away from the traditional match-day hospitality experience. To create a premium experience, Design and Build Specialists Benchmark Designs called upon Forbo’s adhesive-free sheet vinyl floor covering – Modul’up.  Situated on the banks of the River Taff, the Principality Stadium plays host to a range of events and is renowned as the home of Wales’ Rugby Union team. Working with PSE Wales and Levy UK, Benchmark Designs looked to create a distinctive interior space, capable of offering a premium match-day experience for general admission visitors. Combining a variety of furniture and surfaces with a diverse street food menu, the Riverside Terrace was designed with the city high street in mind, as Hannah Glazier, Interior Designer at Benchmark Designs, explains: “The brief we received for the Riverside Terrace was to take this space and transform it from a traditional food service and interior style, to something with a more up-market feel that had a broad appeal to customers.  “Cardiff’s high street has such a wide range of street food eateries and PSE Wales were keen to incorporate this heritage into the Riverside Terrace, with a different vendor selected to cater each match, along with live music. With such a dynamic environment, we needed products that would complement the usage of the space, providing a practical and refined finish. For this, texture was a really important design element and we wanted to make sure the surfaces we specified would complement and contrast with each other.” With this brief in mind, Hannah looked for flooring solutions that would deliver on the desired aesthetic and feel, stating: “The space itself had a very industrial design, with exposed fixings and a metal-studded bar front adding different textural dynamics. With texture and visual quality in mind, we needed a floor covering that came in neutral shades to match the other finishes, but that could also create a warm and welcoming environment. It was for this reason that we specified Forbo’s Modul’up, in its Concrete and Oak colourways combining the texture and tone of concrete with the warmth of timber.  “The realistic timber appearance of the Oak colourway was ideal for the zoned seating area, while we used the Concrete for the circulation areas, as it nicely matched the design scheme for the walls and bar tops. It was important that we used these complementary colours throughout the entire interior, from wall to floors, lighting to surface tops, helping to create a cohesive and well-rounded space, which feels welcoming yet distinctive.” However, it wasn’t just the aesthetic requirements that were key, but the functionality of the flooring too. Hannah explained: “With a capacity of over 74,000, the Principality Stadium is an extremely busy environment. As such, it was essential that the floor coverings used were able to keep up with the high footfall expected at the venue. This was another reason behind our specification of Modul’up. It has excellent indentation resistance, which was perfect for this space, being able withstand intense usage on match-days. It’s also able to be installed adhesive-free, which made it extremely easy to fit, saving valuable time during the installation phase of the refurbishment.”  She concluded: “Our intention was to create a fun and informal space that was suitable for all demographics to use. We feel we achieved this, with our use of versatile and flexible furniture, wall and floor materials contributing to a relaxed and casual hospitality experience.” Having opened in October 2022, the Riverside Terrace has been put to good use over the 2022 Autumn Nations Series, as well as the 2023 Six Nations, with a PSE spokesperson saying of the new space: “Forbo’s flooring has truly transformed the space, with its exceptional quality, versatile design and hard-wearing nature contributing to a modern and trendy atmosphere. The choice of flooring seamlessly merged functionality with style, making it an ideal option for entry-level hospitality settings. Overall, we’re delighted with the finished project and have enjoyed entertaining our customers in the new space.”  Benchmark Designs’ work on the Riverside Terrace saw the project achieve ‘Commended’ in the 2022/23 iteration of the Forbo Escapes competition. Find out more about Forbo’s Modul’up collection, here: https://www.forbo.com/flooring/en-uk/commercial-products/modul-up-adhesive-free-sheet-vinyl/cum7pa

Forbo Flooring Systems’ Marmoleum was the product of choice for a creative breakout space at investment management firm, Triple Point. With its growing headcount, Triple Point appointed AW Spaces to create an environment that could accommodate the company’s hybrid working strategy, whilst developing a light and warm aesthetic.  Founded in 2004, Triple Point employ 215 people and manage over £2.7 billion of private, institutional and public capital across five distinct investment strategies: Social Housing, Energy, Digital Infrastructure, Private Credit, and Venture. Each of these strategies helps to solve a problem society faces, and each one creates opportunities for investors.  With the company’s increased headcount and the new hybrid working strategy, AW Spaces suggested increasing the size of the breakout area available to employees. The aim was to make this area feel different from the working environment, by incorporating warmer colours with a dynamic flooring design.   Another important aspect for this project was the environmental impact. Lisa McLeod, Design Director at AW Spaces spoke on this, saying: “Sustainability was a big part of Triple Point’s brief. As such, when it came to choosing a floor covering for the space, the sustainability aspect led us to look at products such as Forbo’s Marmoleum. After discussing the sustainable flooring with Triple Point, where I also sent them a concept image of a design, we decided it was the perfect solution.  “Not only did Marmoleum fit the sustainability requirements, but it’s also available in a variety of contemporary designs that match in tone with each other, which allowed us to create a very dynamic space. Additionally, it’s a really nice material to work with, which aided the installation process.”   Forbo’s Marmoleum was specified in Terracotta, Titanium and Vintage Blue from the Marmoleum Walton range, and in Neptune Blue from Marmoleum Piano. Lisa commented on these choices, saying: “We chose these colours as they work beautifully together and coordinated with the joinery so it looked as though those elements rise from the ground. We also really liked the warmth of the Terracotta colourway and the brightness of Neptune Blue, which provided some contrast from eachother without looking disjointed from the joinery they connected to. The choice of colours really helped us to convey the feeling that this space was for relaxation rather than work, with all the colours flowing into one-another nicely.”  This refurbishment wasn’t like a typical installation as there were multiple different colourways which had to be combined in different shapes. As opposed to a typical refurbishment where tiles or sheet flooring is laid; this flooring had to be cut into shape in situ. The finished flooring mixes curved edges with sharp points, with all four colourways meeting towards the middle of the floor then flowing out at different angles around the room.  Lisa continued “The pattern was quite complex, so Forbo recommended an installer called Medifloor to us who could take on this challenge. We had worked with them on a couple of occasions before, so we knew they had the credentials, and they did a fantastic job with pinpoint accuracy!  “We’re absolutely delighted with the finished result and I’d say the breakout space remains my favourite part of the entire project.”  With a unique installation, a specialist approach had to be taken by installers, Medifloor. Jim Gordon, the Director of Medifloor, spoke on this, saying: “AW Spaces gave us this amazing design for Triple Point, which was extremely challenging to create with all the different curvatures. So, to achieve it we actually used computer aided templates which allowed us to cut the perfect curve – something that’s really hard to acheive in flooring.   “Forbo’s Marmoleum Walton was perfect for this, as it’s the only sheet flooring that lends itself to the natural materials used in this project and looks amazing when finished.”  With this method, a creative and dynamic flooring solution was created. With the installation starting in July 2022, Triple Point’s office refurbishment was finished in mid-September 2022 and has been well received by the staff who use it.  Luke Francois, Guest and Employee Experience Manager at Triple Point, concluded: “We asked AW Spaces to create a bright and inviting space, with a focus on using sustainable products and services, and Forbo’s Marmoleum ticked all the boxes for this. We’re happy with the end product delivered by AW, Medifloor and Forbo.” For more information about Forbo’s range of office products, visit: www.forbo-flooring.co.uk/offices  

Burton Green Primary School is located in the historic city of York, an outstanding school at the heart of a local community this primary school strives for excellence. The challenging and nurturing learning environment allows children to learn and grow, while achieving the highest potential possible in all areas of the 21st century curriculum.When the roof began showing signs of ageing, it was clear that a long-term solution was required. Working with Project Managers Charles Garth and Principal Contractor Castle Special Projects, Polyroof would work towards providing the best solution to refurbish the ageing roof.The work required and condition of the roof needed to be established first, to do this a survey was scheduled to take place. The survey was conducted on roofing area and it was determined that there were 6 flat roofs that required refurbishment. Areas 1 to 2 were constructed of a built up felt with mineral cap sheet, 50mm PUR insulation, bituminous vapour control, asphalt, 12mm fibreboard and a 50mm woodwood slab deck with timber joists. Areas 3 to 5 were constructed of a built up felt with mineral cap sheet, 50mm Jablite insulation, bituminous vapour control, asphalt, 12mm fibreboard and a 50mm wood wool slab deck with timber joists. Roof area 6 was made up of built-up felt with mineral cap, plywood and timber joist. The original build-up of roofs 1 to 5 needed to be stripped back to the asphalt due to the aged condition of the built-up felt, numerous leak reports were reported. Roof 6 and its original waterproofing was to be retained and made good, later this surface would act as the substrate for the new waterproofing system.Once the survey was completed, a bespoke specification was written and it was recommended that the roofing areas would all benefit from a high-performance waterproofing system. In addition to this it was specified that the roof would be thermally upgraded to reduce the risk of condensation and provide lower fuel bills and energy consumption for Primary School further adding benefits to making improvements to the roof.Liquid Roofing Limited an experienced roofing contractor and Polyroof Approved Contractor was chosen to undertake the work to this project. The proposed system for this project would be Polyroof Protec Warm Roof System. Protec’s liquid roof membrane has a unique flexible hybrid polymer formulation and can be applied to virtually all common roof surfaces.The areas that were required for installation firstly needed to be stripped and removed back to the asphalt, areas 1 to 5 required this. Area 6 was then repaired of any defects and made good where necessary. All roofs required a deep clean, removing any dirt or debris that remained from the first stage. Once this preparation was completed an Air & Vapour Control Layer (AVCL) was then installed to roof areas 1 to 5 making sure that all surfaces are smooth and without voids.Using a Polyroof Twin Pack Insulation Adhesive the Polyroof RES insulation (T&G) boards were bonded and laid to each of the 6 roof areas completing the second stage of the warm roof upgrade. Before the last stage of the installation could begin all joints in the insulation were sealed using taping matt and Polyroof Protec Resin. Polyroof’s extra-tough GRP trims were then installed to create neat and robust edge detailing for exposed perimeters before the main Protec system application commenced.During the project there were some challenging aspects that required care and attention. The project featured a large array of different details ranging from installation of new substrates and trims for parapet walls to the removal of and preservation of tiles/cladding so that the Protec system could be applied correctly. These features required delicate work so that the original tiles/cladding could be reinstated after the application of the system was completed. During the project the rooflight that was originally in place was removed and replaced with a new, before this could happen the Protec system was taken up the upstands and then sealed under flange.Once the project was completed within the relevant time frame of the client and within the budget specified, the Polyroof Technical Services team conducted a detailed inspection showing a high level of workmanship which lead to the client gaining the trusted Polyroof Accredited System Guarantee.

Native’s flagship boutique aparthotel in the bankside conservation area of Bear Gardens is an eight-storey scheme that involves the transformation of three of the five buildings located within the confines of the densely packed area. IG’s brick feature arch lintels feature on the front elevation of the former derelict 19th century Empire Warehouse that has been replaced and linked into a 75-room boutique aparthotel.Challenge:SPPARC in association with Southwark Council, Macro Investments and Native wanted to demonstrate that modern architecture can successfully cohabit with the historic collection of buildings informed by the industrial heritage that dominates the southern bank of the River Thames.A carefully considered restoration and modern intervention was required for a cutting-edge contemporary mixed-use development, offering an urban experience for its users but remaining sensitive to the colourful history, conservation area and surrounding developments.Solution:IG’s technical team designed eighteen brick feature arch lintels to accommodate metal paned and arched factory styled windows. A 2718mm opening span and 143mm rise was required for each prefabricated lintel, each including a 338mm high face brick and 223mm soffit return with either a 78 or 90-degree end skew.The massing arrangement across each floor ensures that natural light is maximised throughout the building with the intricate brick detailing prominent at street level appearing above impressive double height foyer windows. The offsite construction method used negated the need for skilled brickwork to be created onsite to achieve the decorative brick pattern at a raised height. This helped to reduce any health and safety concerns in a location surrounded by tourist destinations and narrow cobbled streets.The ground floor of the scheme provides mixed use units with the northern site leased by Bell English Language School and the southern site providing studios for the iconic Globe Theatre directly linking to their Sackler Education Building.The upper floors are lighter in composition, combining clear and obscure floor-to-ceiling glazing with rich bronze circular rods, creating a strong rhythm to the façade, and enhancing the appearance of the once-dilapidated buildings. The upper floors of the Rose Alley elevation have perforated bronze screens that offer privacy, referencing the loom patterns that were once manufactured in the original warehouse.

The GemA full redesign and refurb took place at the ground floor of 111 Piccadilly in the heart of Manchester to accommodate a multifunctional co-working space within an independent coffee and lounge.IQ Projects have created a sculpture-like façade, using triangle structural glass panels in combination with our bespoke made, real oak veneered Technowood panels.Extraordinary design with extraordinary limitationsThey wanted to build a façade that is not only artistic and beautiful from the outside, but it is also practical and part of the interior design as well.All the glass panels are functioning as windows, letting light into the lounge and providing visibility to the outside.The complex structure had to use minimal sections too, so it can achieve the design. IQ has used steel instead of aluminium to build the structure, so it remains slim.The other challenge was the wooden elements. A specialist product was needed. Wooden panels that are strong, large and thin enough to be used.Panels that will stand the weather conditions, and requires minimal maintenance.We were able to supply these open grain oak veneered panels, that is rich in texture.Technowood eliminates the design limits of wooden elementsUsing real wood veneer has been popular for decades, the reason it gained popularity was to achieve better designs while saving on cost.Technowood has leveraged the benefits of this method and created patented solutions that ensures the veneers will last externally on all kinds of materials, such as Aluminium.With Technowood we can create the most unique pieces of real wood finished products. Some of the key benefits of Technowood products:It can be A2 fire ratedMuch lighter than solid timber or even composite materialsUp to 60% quicker on installationNo flitch beams nor unnecessary reinforcingNo visible fixingsWarranted for 20 yearsFSC and Environmental Product DeclarationAnd it looks like timber … because it is wrapped in real timber veneer. We do have in-house designers that offer solutions should you require. You can visit our office and showroom which is based in the Sky House design Centre, Amersham. Easily accessible by public transport (metropolitan line) or by car (M25 J18/M40 J2), please make sure you book an appointment.

2021 sees Rolls Royce unveil Testbed 80, the world’s largest & smartest indoor aerospace testbed, as part of a £90million investment. It has been a hard year for the aerospace industry, with production slowing, and cuts in jobs, however this ground breaking facility shows Rolls Royce’s confidence in the future of aerospace for decades to come.HAG Ltd. have proudly worked alongside Buckingham Group to assist in this ground breaking facility that will not only test propulsion systems of the future, but also secure jobs in Derby, UK for many years to come.HAG Ltd. were tasked with designing & manufacturing a roller shutter for this distinctive & state of the art facility, to enable Rolls Royce to test the largest, smartest and most powerful engines in the world by MDS Aero Support Corporation of Ottawa, Canada.HAG Ltd. designed, manufactured and installed 2 Armourguard F1 insulated roller shutters that were 7.5m by 15m. The F1 model is a high quality insulated security shutters delivering the highest level of security and offering thermal protection. A composite of foam filled sections is encased in a flat double skinned interlocking galvanised steel lath.The project:£90million project3 years of construction7,000 square metres, the same size as a Premier league football groundHouses the world’s largest exhaust pipeContains 3,218 tonnes of steelAnd 27,000 metres3 of concreteEquipped with a 40,000 litre fuel tankCapable of testing engines on Sustainable Aviation FuelThe most capable & complex testbed ever designed & builtWarren East, Chief Executive, Rolls-Royce, said: “Testbed 80 is the largest facility of its type in the world. However, it is not only big, it is also smart and features the most advanced testing technology we have ever used. As the new global hub of our testing capability, it will support the next stage of our UltraFan programme as we begin ground testing the first demonstrator in 2022. This incredible piece of infrastructure is a very visible sign of our commitment to this site and secures the future of Derby as the home of large engine development, continuing a history that began in the late 1960s with the RB211.”HAG Ltd. are proud to be part of this monumental development in the aviation industry.

Sector: Built-to-rent accommodation (mix of affordable and commercial rental)Client: Populo LivingArchitect: dRMMMain contractor: Bugler Developments Specified for:Good cost / quality ratioSustainable window frame constructionFaçade-specific performanceExcellent design supportThe Didsbury, in London’s East Ham, is a high quality ‘Built-to-Rent’ development offering an equal mix of affordable and market rent apartments. Designed by Stirling Prize-winning architects dRMM for Newham’s housing company Populo Living, and built by main contractor Bugler, The Didsbury comprises 148 apartments in two six-storey new-build blocks which sit south of the former East Ham Town Hall Annexe, which is being refurbished. Smart interior design is matched by a highly distinctive exterior featuring brick and gold clad facades. VELFAC 200 windows, patio doors and entrance doors are installed in every apartment to provide both a quality finish and impressive low energy and low maintenance performance. Windows, doors and Juliette balconiesEvery apartment features a combination of VELFAC windows and patio doors (leading to a balcony or terrace) and inward opening, tilt/turn VELFAC IN glazed doors. These are used to create Juliette balconies, with balcony fittings integrated within the VELFAC frame to simplify subsequent railing installation. As every apartment features a range of interior materials, inner VELFAC timber frames are painted white to create a neutral and low maintenance finish ideal for rented apartments. External aluminium frames are finished in a dark grey polyester-powder coating to complement to both the brick walls and gold cladding. VELFAC also supplied head pressings to match the window sills, thereby ensuring a neat and consistent finish at both top and bottom. Our ‘go to’ composite glazing brandHaving successfully used VELFAC products on earlier projects dRMM was happy to specify the system for The Didsbury: ‘VELFAC has become our ‘go to’ brand when specifying composite glazing,’ says Findlay McFarlane, Architect at dRMM. ‘The system offers a good cost to quality ratio, and the frame design results in low embodied carbon, primarily due to the percentage of recycled aluminium used. This was important for Populo Living’s sustainability targets, and for dRMM as we champion climate-conscious architecture and the use of natural wood, which again is a feature of the VELFAC frame.’ Main contractor Bugler Developments was also happy with the specification: ‘We knew from the outset that we would be using the VELFAC system, and as we had used it before we knew it would meet our client’s requirements,’ comments Thomas Bugler, Head of Marketing. First discussed in 2015, The Didsbury has been a long and complex build. VELFAC, however, is one of the few suppliers to remain with the project from start to finish, thanks to the quality of the system and the expertise provided at every stage build. ‘We liaised with VELFAC right from the start of the project, through the detailed design stage, procurement and eventually to installation on site, with amendments and updates included along the way when necessary,’ says Thomas. ‘The project’s sustainability and affordability targets became more challenging due to this long planning phase,’ adds Findlay, ‘but the VELFAC system continued to meet the specification as it evolved.’ Technical support above and beyondWhile The Didsbury’s minimalist exterior may look sleek and simple, specification was in fact very complex, comments Findlay, and required expert input from the VELFAC team: ‘The stepped façade and variety of façade-specific performance targets meant that not all floors had an identical specification,’ he explains. ‘In addition, while VELFAC double glazing met all low energy targets, we needed to fit acoustic trickle vents into road-facing windows and ensure lower floors and balconies had windows with Secured by Design accreditation.’ Issues regarding weathering within the gold cladding also needed attention, comments Thomas: ‘This required some on site consultation with the VELFAC team, and updated detailing to ensure the end result was compliant and of the right quality - we are very pleased with the finish, and the windows and doors work well within the overall development.’ In fact, VELFAC support made a significant contribution to the success of the whole project says Findlay: ‘We worked closely with VELFAC on detailed drawings for the windows and doors, and were impressed with the level of support provided – more than that typically provided by a supplier, and another reason why we like to use the VELFAC system when we can. The thoroughness of the detailing meant there were fewer surprises when it came to installation, helping us keep on schedule during the final build and installation phase.’

Project OverviewThe Percy Gee Building, at Leicester University, is named after a former benefactor and chairman of the former college. Over the last 2-3 years the building has undergone an exciting £13.1 million transformation and expansion. This is a multi-purpose facility, home to the Students’ Union, a venue for informal learning and a centre for refreshment and eating.PLEASE NOTE: BETTER IMAGES WILL BE POSTED WHEN WE CAN ACCESS TO THE BUILDING WHICH IS CURRENTLY CLOSED DUE TO COVID-19. THESE PHOTOS WERE TAKEN THROUGH A GLASS WINDOW. That hard-working industrial lookA main hub of the building will be ‘Campus Kitchen’ a new food court which will provide a range of varied cuisines for staff, students and visitors This is an interior occupied by Millennials and Gen Z and the décor needed to reflect their styles and trends. By using Amron Welltec “wave” or “corrugated” profiled aluminium sheet on an interior wall something new and unexpected was injected into the kitchen space. To take this ‘jolt away from the norm’ still further the designers envisaged not shiny metal, but the appearance of weathered and rusted metal – an industrial ‘vibe’ perhaps hinting at determination and hard work.Powdertech Collections includes a range of finishes which replicate patination/rust on metal, giving a ‘Corten’ appearance but with no rusty residue which could mark clothing and other surfaces. The client chose ‘Firebox’ from the Evolution/Rust collection. This gives a very natural ‘rusted’ look with no two panels looking the same. Powdertech applied Firebox to 80 m2 of material which line the walls and over-counter area of the Campus Kitchen.BenefitsEvolution™ Rust finishes can be used internally and also externally. There is no residue, and no run-off or staining from rainwater.The striking designs are achieved through using polyester resin systems, and a bit of magic!The finish can be cleaned like any other powder coating – minimal maintenance.We are passionate about colour and always keep up with latest trends in shade and texture of finishes.The Evolution range has up to a 25-year guarantee for gloss, colour and adhesion.Conforms to ISO 12206 and Qualicoat specifications.

Marischal Square Bauder Bakor Hot Melt structural waterproofingSynopsisMarischal square is a mixed use complex in the centre of Aberdeen based on the site of the former council headquarters building, St. Nicholas House. In 2011 Muse Developments undertook a £107m redevelopment of the site creating space for two new office buildings, seven restaurants and café bars, a 126-room hotel, a modern civic space and a new public space area in between the new buildings.Bauder Building BoardProject:Marischal SquareLocation:AberdeenRoof Area:5,400m²Client:Muse Development & Morgan SindallApproved Contractor:Briggs AmascoThe specificationWith large parts of the new roofing areas being accessible terraces and areas which will experience a significant amount of foot traffic, the Bauder hot melt structural system was a natural choice. The system was combined with hard and soft landscaping to provide the different aspects of the various terraces, stairways, podium decks and rooftops.The Bauder Hot Melt structural waterproofing system is ideally suited as a waterproofing system beneath paved or ballasted surfacing, car parks, podiums, plazas, green roofs and substructures.Project challengesA key challenge for this project was the fact that Muse Developments and Morgan Sindall, who were working jointly on the development, were looking for a single source waterproofing. Bauder proved to be the perfect fit, covering and delivering all elements of the waterproofing systems.The resultApproved contractor Briggs Amasco carried out the works on the 5,400m² of the separate roof areas, whilst expert Bauder site technicians carried out a total of 26 site visits over the duration of the project to ensure the quality of the installations. Following a final inspection, Bauder was able to issue a 20 year product and workmanship guarantee on the project.System installed1 BauderPLANT E 42Green torch-on root-resistant capping sheet.2 790-11Hot melt rubberised bitumen asphalt with a percentage of post-consumer recycled materials that infills and fully bonds to all minor deviations in the deck.3 DeckPrimed concrete.

The Sands - Durham WaterfrontArchitect: Ryder Architecture LtdInstaller: Pennine ContractsProduct: Durlum Polylam BafflesLSA Projects supplied over 300 linear metres of Durlum Polylam baffles to the new facility The Sands on Durham Waterfront in the city centre. The new riverside development was intended to move the County Council headquarters into the city centre for improved public transport connections for staff and other visitors.In 2022 the building applied for change of use planning to convert the landmark building into additional learning spaces for Durham University Business School. The change of use allows the department of the Russell Group university to move straight into the ready-made facility after delays with their original plans for a different site.The £50m facility has space for the 2,300 students and members of staff at the business school across the 1.4 hectare site. In addition to traditional learning spaces the building has modern working space for staff and academics and hopes to attract leading businesses to work with the university and graduates.Durlum Polylam baffles were used for the feature ceiling in the main event space. The ceiling is made up of 320mm deep 100mm wide baffles in concentric squares with the outer square measuring an impressive 20 metres across. Polylam pieces were finished in a Dur-Graphic faux Cherry veneer print and mounted in 9 double-row rings with alternating strip lighting and integrated ventilation systems.Polylam from Durlum is a versatile ceiling system made up of vertical baffles available in a range of sizes up to 100mm wide by 800mm deep. Pieces can be installed using suspension grid systems available from Durlum in a variety of ways including independent mounting and group mounting with regular spacing and options for demount-ability.Baffles are made from either galvanised sheet steel or aluminium and finished in a choice of RAL colour powdercoating as a standard with options for gloss and metallic finishes as well as Dur-Graphic and Duroplan printed designs. Acoustic perforations can also be applied to the baffles as well as incorporating Dur-Sonic acoustic mineral wool filling to the inside of the hollow baffle lengths.

Urban development within St. Helier, the capital of Jersey is gathering momentum with URSA seeing its specialist insulation products specified at one of the capital’s newest and most ambitious developments. The largest of the Channel Islands, St. Helier is a lively harbour town and has become one of the UK's most popular tourist attractions, creating a high demand for ongoing residential and commercial development. Both its commercial port and marina, as well as the centre and the main neighborhoods, are undergoing an in-depth study for the renovation of its building stock and the transformation of the urban landscape it offers. The ultimate objective is a profound urban regeneration carried out through the creation of a commercial heart open to the sea, in the city centre, and modern, sustainable and healthy residential developments on the outskirts to ensure the demands of future growth. It also aims to reduce traffic and create a walkable city for pedestrians and cyclists with green spaces and open spaces. In the north of the city is Ann Court, a large development located next to a large municipal park built on the site of a former car park that has been demolished. Being developed by Andium Homes, construction is nearing completion on the development of 165 new homes of different sizes and orientations (with internal and external courtyards), but with a common standard: the energy efficiency and sustainability of the whole complex. To support the sustainable objectives, architects have specified a ventilated façade that guarantees thermal and acoustic comfort, whilst preventing moisture penetration and condensation. A correctly designed ventilated façade system also guarantees a fire safe structure, prolongs the life of the building and enhances its energy efficiency. As part of the specification, 2,400 square meters of 220mm URSA Walltec Black 32 were specified. The choice of material was the direct decision of the architect Stephen Marshall of Axis Mason Architects, who decided on the glass wool slabs after learning about their performance and the knowledge provided by URSA's technical office. URSA Walltec Black 32 is a semi-rigid glass wool slab treated with a water repellent additive. The slabs have a black glass fibre tissue to one side only that helps to hide the insulation in ventilated façades with open joints. It is a non-combustible product that does not contribute to the spread of fire, is water repellent and has high performance to ensure the thermal and acoustic comfort of the entire residential complex. Once the insulating material has been fixed, the façade is completed with the installation of the cladding to create cavity that ensures the properties of the system. This imposing façade enveloping the courtyards of Ann Court facilitates a new building in the north of St. Helier where social interaction, tranquility, quality, comfort and healthiness are guaranteed.  Ian Claydon, URSA UK Technical Manager, said: “We first became involved in this scheme in June 2020. We were approached by the architect for recommendations on correct choice of product and the thermal assessment for the external walls.  “During the early stages of the project, we were in regular contact providing advice on the target U-value in the wall(a commendably low 0.18 W/m2K), as well as the impact on Jersey SAP energy assessment and the technicalities of rainscreen cladding. The team were particularly impressed with the speed of response and our wider technical knowledge, helping to support the perfect specification.” 

The Cube is a striking new student housing development in the centre of Utrecht, Netherlands, designed by Amsterdam-based architectural practice, Team V, and featuring Freya multi-coloured brick slips from Vandersanden, which are used with the award-winning, pre-fabricated Signa facade system. This multi-use complex, which incorporates 639 student apartments and 1,000m2 of commercial space, provides a dramatic focal point in the redeveloped Overvecht area with its stepped rooftop landscape and two 50-meter-tall, interlocking vertical accents. The Cube mainly consists of small independent living spaces of about 21 square meters. Students can also use a wide range of shared amenities, such as living rooms and studies, laundry rooms, bike storage, and a rooftop garden on each floor. A series of rooftop gardens, connected to one another by stairs, form two routes that start on the ground floor, recognisable as a timber-finished incision cut out of the brick facade.Built in a year and a half by utilising clever design solutions, The Cube incorporates lightweight prefabricated components, to help accelerate the construction process and reduce material usage by cutting the depth and density of the foundations required. This pre-fabricated solution was the result of a collaboration between the architect, the builder and Vandersanden. Whilst searching for light weight building solutions and with a relatively fast building time in mind, a prefab option was specified. The unique Signa system comprises a prefabricated panel designed on the basis of a dimensionally stable brick panel that is resistant to the weather and covered with sustainable Vandersanden brick slips. Together with a prefab manufacturer the final panels were fabricated under stable conditions and assembled in Utrecht. A crane and 2 to 4 construction workers mounted up to 12-14 panels a day.Freya brick slips were chosen for their nuanced yellow/buff colour with ochre and grey tones, and a grained, characterful appearance. Two types of brick bond were used for the design, one being a vertical stretcher bond and the other a unique block bond. What is seen on the facade is the rigid structure of the grid that is used horizontally and vertically.Ruben Smits, architect from Team V explains; ‘the depth difference and the horizontal and vertical direction of the bricks, ensures that the prefabricated seams are hidden, creating a uniform facade appearance. We have also made great use of encouraging habitats for wildlife and all of that is behind the brickwork facade. We chose Vandersanden’s Freya brick slips because of its texture and variety of tones and colours, which helped us to achieve our design vision. The Signa panels offered us endless creative possibilities and fit together seamlessly which helped to accelerate the build process.’The choice of the Vandersanden Freya brick slips for this project was the result of much research into finding a brick with the desired aesthetics, which would also meet the technical requirements of the project. This brick type was a unanimous choice amongst those involved in the decision-making process. The project was completed in Autumn 2021.To find out more about the bricks used in this project or to see the wide range of high-quality bricks available from Vandersanden, click on the 'View more' link

We supplied our Südanit 280 Alpha Hemihydrate Binder to our Smet Supported Partner, Fast Floor Screed Ltd, who pump-applied their self-levelling, Südanit 280 Alpha Hemihydrate Screed in this amazing new apartment development for Cairn Home Plc in Dublin.The delivery, completed using their mobile screed factories, enabled Alpha Hemihydrate Screed flooring solution to be installed quickly and efficiently over the entire project over two sessions. The apartments are amazing looking: https://www.cairnhomes.com/new-homes/marianella/This CE marked, self-smoothing, self-levelling screed is the most technologically advanced floor screed available, complying with the performance requirements of EN 13813.Südanit 280 Alpha Hemihydrate Screed’s advanced composition means that it reacts with water quickly – providing consistent, reliable drying characteristics and considerably faster drying times – enabling follow-on trades to proceed without delay.The Fast Floor Screed Mobile Screed Factory – is a unique system. The lorry mounted rigs carry Sudanit 280 Alpha Hemihydrate binder, sand & aggregates and water in separate compartments. The automatic production process ensures materials are precisely weighed, fed to the mixing bin, and into the pump for easy, mess-free installation. Ensuring the Fast Floor Screed Mobile Screed Factory produces Sudanit 280 Alpha Hemihydrate floor screed to a consistently high quality. Have a look at Fast Floor Screed past projects.The floor is remarkably quick to walk-on – applied at 500m² per day and walkable within 6 hours and it’s particularly suitable for use with UFH, fully encapsulating pipes and services – increasing the performance of underfloor heating, maximising your insulation, and therefore improving your building’s U-Values performance.Check out more projects using this screed:https://www.smetbuildingproducts.com/projects/by-product/casea-sudanit-280-alpha-hemihydrate-binder/Whether your job is self-build, retro-fit, floor renovation, design, commercial or industrial venture – we have a floor compound suitable for you.Contact Smet Building Products Ltd for any advice regarding your substrate.Related DownloadsTDS CASEA Sudanit 280 BinderEPD – CASEA Calcium Sulphate Flowing ScreedTDS SMET_Tiling Onto Calcium Sulphate Floor Screed_System ITDS SMET_Tiling Onto Calcium Sulphate Floor Screed_System II

Canberra HouseBauder Cold Applied LiquiTOP SystemSynopsisCanberra House is an office facility in Swindon. The existing single ply PVC waterproofing system roof was leaking and so Bauder carried out a full site survey. The resultant report gave the client several options to rectify the leaking roof.Bauder Building BoardProject nameCanberra HouseLocationSwindonProject typeRefurbishmentRoof size985m²SpecifierRapleys LLP (Bristol)Approved contractorCentral Roofing & Building Services LimitedThe specificationThe LiquiTOP system was chosen as it can be applied directly to the prepared and primed existing single ply covering. The liquid system allowed us to get into tight spaces and without the need for any hot works.LiquiTOP is excellent on refurbishment projects where the complexity of the roof involves intricate areas to be detailed that are not easily achieved with a sheet membrane, or the actual working space on the roof is constricted.Project challengesLarge areas of plant and machinery were situated just above the roof level making access to the areas below difficult with the plant in-situ. The available budget on this project did not allow for lifting or removing the plant, stripping the existing waterproofing system, and replacing with new. Therefore, the decision was made to overlay the existing single ply membrane with a cold applied liquid waterproofing which can be installed without the need to raise any plant.To overcome drainage challenges, secondary upstands were created under the plant and fabricated channels placed underneath allowing water to flow through to the drainage points.The resultBauder was able to offer a cost-effective solution without the necessity to remove or decommission the roof mounted plant and machinery. Cost reductions were achieved for the client by overlaying the existing roof, negating any need to strip existing materials, and not having to remove or raise the plant.The works were carried out by Central Roofing who manged the project impeccably and also finished ahead of schedule.System installedBauder Cold Applied LiquiTOP System1 LiquiTOP PU cold applied liquidA moisture triggered curing polyurethane waterproofing resin; applied in 2 coats, reinforced with Bauder LiquiTOP Glass Fibre Mat.

Wadham CollegeBauder Bakor 790-11 Hot Melt structural waterproofing system with BauderGREEN componentsSynopsisThe University of Oxford’s Wadham College graduate centre project was a complex refurbishment. Led by Lee Fitzgerald Architects and main contractor Feltham Construction it involved the careful restoration, adaptation and extension of the 1960’s grade II listed building.Bauder Building BoardProject:Wadham CollegeLocation:OxfordRoof Area:439m²Specifier:Lee Fitzgerald Architects​Main Contractor:Feltham ConstructionApproved Contractor:Deane Roofing & CladdingThe specification The brief for the project was to renovate the graduate centre and to link to the main college by creating a new entrance to the building. This led to the construction of a new building, the McCall MacBain Graduate Centre, which also now provides access to the Barbara Naylor rooftop gardens above the different reading, media and seminar rooms of the graduate centre. With the ageing existing waterproofing exceeding its life expectancy, the roof garden terrace was in need of a replacement roof system.As an accessible area which will experience a significant amount of foot traffic, the Bauder Hot Melt was determined to be the best solution for this roof. With a durability to match the expected life of the building and a self-healing system, the Bauder Bakor Hot Melt System is ideal for use on protected roofs such as inverted, paved, ballasted and terrace roofs.The resultApproved contractor Deane Roofing & Cladding carefully removed 439m² of the existing waterproofing, stripping the rooftop back to the concrete deck surface before installing the different layers of the Hot Melt system.The completed roof terrace now provides a modern and peaceful garden area where graduate students can relax and socialize between their work periods. Following several site visits by Bauder’s expert Site Technicians and a final leak test, a 20 year guarantee was issued for the roof terrace.System installed1 BauderPLANT E 42Green torch-on root-resistant capping sheet.2 790-11Hot melt rubberised bitumen asphalt with a percentage of post-consumer recycled materials that infills and fully bonds to all minor deviations in the deck.3 DeckPrimed concrete.

Over the Summer of 2018, Cyclehoop installed first batch of Bikehangars in Salford, Greater Manchester.Transport for Greater Manchester’s  overall aim is for the proportion of journeys made by bike to increase from 2 per cent today to 10% by 2025. This target has been broken down in to a package of proposed improvements for the region, partly funded by two Cycle City Ambition grants, awarded by the government and the Local Sustainable Transport Fund.Lack of secure cycle storage provision has been a barrier in realising this goal. At Cyclehoop, our commitment is to break down barriers that prevent people from cycling.In June this year, we installed 11 of our award-winning Bikehangars in June on residential streets in Salford. This will run for a test period of approximately 12 months. Cyclehoop’s team installed these 6-space units over the course of a week, primarily to provide cycle parking for residents with little or no internal space to store bikes.The Bikehangar has a galvanised sheet steel body that protects up to 6 bikes from the elements and vandalism. Along with a lockable, gas-sprung door which can only be accessed by registered members. Crucially, all of this is achieved in just half a car parking bay.If the Salford pilot is successful, Salford City Council and Transport for Greater Manchester plan to roll out the scheme to other areas. To find out more on the current Bikehangar locations, pricing and how to apply, please click here.Cyclehoop were praised for their delivery of the project and the fledgling pilot scheme has been received extremely well across the board.Councillor Antrobus, Lead Member for Planning and Sustainable Regeneration said:“Many people say they would like to cycle but have no space to store a bike at home. These new Bikehangers solve that problem and are already proving extremely popular. It’s all part of our commitment to encourage more people to cycle in Salford – either for commuting to reduce congestion on the roads or for pleasure and health benefits”While Infrastructure Manager for Cycling and Walking, Catriona Swanson commented:“The bikehangars look great and have generated a lot of interest from cyclists. We’ve had a lot of positive comments from cyclists and cycling campaigners for piloting the scheme in Greater Manchester.”

OverviewThe BP2 office building was constructed on reclaimed land at the eastern gateway to the Canary Wharf estate and comprises 14 stories above ground, plus three basement levels. The building’s design places a strong emphasis on energy-efficient performance, so this was an important criterion in the selection of ventilators.OverviewThe BP2 office building was constructed on reclaimed land at the eastern gateway to the Canary Wharf estate and comprises 14 stories above ground, plus three basement levels. The building’s design places strong emphasis on energy efficient performance, so this was an important criterion in the selection of ventilators.Project BackgroundAir Design Systems Ltd provided a full design and build package for the client. This included installation of local control panels and electrical wiring, as well as micro-switches to allow a positive signal that each ventilator is fully open prior to the pressurisation system starting up. Air Design Systems Ltd also supplied and installed numerous continuous louvres to the plant wells that rise through the building and terminate at roof level.Project SolutionPowrmatic supplied a large office building ventilation solution with a combination of single and double flap Skyvent ventilators to provide natural and smoke ventilation at the BP2 building in Canary Wharf, East London. Each of the 13 BS-EN 12101 ventilators was installed by Air Design Systems Ltdonto existing upstands with insulated lids and bodies and polyester powdered coated to RAL 9007 matt.Project ResultSkyvent ventilators are designed for both smoke and natural ventilation and are available in single and twin flap versions to suit the needs of each project. They can be installed on upstands, roof sheeting and into glazing systems. They feature very low air leakage when closed, and are weatherproof when closed, as tested to BS Parts 1 & 2. Insulated options can achieve U-values as low as 0.17W/m2/K.Skyvent ventilators are available with optional aluminium (single skin and insulated), polycarbonate or glazed lids in polyester powder paint finishes to any standard BS or RAL colour. A full range of accessories is available including bird guards, security guards and insect mesh.

Located at the first locks of the Manchester, Bolton & Bury Canal, the second phase of the £1bn Middlewood Locks development in Salford delivers 546 apartments across 4 new buildings with private podium gardens. Phase 2 of the development is part of the wider mixed-use scheme to regenerate 25 hectares of brownfield land with new apartments, office space, a hotel, bars, restaurants, car parking and a gym.The large catchment area of the development discharges to the newly renovated balancing basins that service the confluence of adjacent canals and the River Irwell. An extensive podium drainage landscaping design was required to meet the site’s strict discharge limits and reduce the impact of surface water run-off to less than that of the pre-developed brownfield land.The ABG blueroof storm water attenuation system specified for the scheme covers over 9,500 m2 and restricts rainfall outflows to below the 16 l/s discharge limit on Plot G of the site and within the 20 l/s limit for Plot H. The system incorporates 27 ABG restrictor chambers above rainwater outlets which are configured to restrict outflow rates to within the discharge consents.The system is designed to attenuate a 1-in-100 storm event (data extrapolated from the local FEH 2013 flood report), plus 30% allowance for the effects of climate change. The geocomposite drainage and attenuation layers and network of restrictor chambers serve to filter surface water run-off pollutants to treatment train stage one of the SuDS process, meaning no other filtration measures are required. The top of the chambers are designed to sit flush with the porous resin paving surface, and different configurations and thicknesses of drainage composites were used to achieve the correct height of system to match the different surface levels. The ABG Deckdrain geocomposite layer provides multi-directional flow capacity to efficiently channel rainwater to the nearest restrictor chamber outlet whilst the integral geotextile filter helps to prevent the cuspated drainage core from becoming blocked.The choice of hard and soft landscaping materials specified for the development are of a very high standard and the inclusion of large areas of green spaces and substantial planting creates valuable new private gardens and amenity spaces for the area.The attenuation system configuration was designed and supplied by ABG and installed over a 6 month period by ABG Installs. As part of the storm water attenuation system design, a new restrictor chamber diffuser was developed to fit directly onto the downpipes of the apartment buildings. The attenuation voids were modified to allow for cable ducting to pass through them and a method was also developed to provide structural drainage beneath the concrete footings of the stone planter walls.