"roof light"

Modernising historic properties can bring major challenges. The architects at Fuse Studios gave careful consideration to this question as they prepared for a refurbishment of the Fine Arts building at Leeds University. Early on, the new access ramp at the front entrance was identified as an important visual centrepiece. The architects opted to use Q-railing products, including an LED-lit handrail, when creating an ultra-safe glass railing for the ramp. Q-railing recommended the Easy Glass Max system. It is highly robust, meeting all the relevant safety requirements with ease, and yet provides an uninterrupted glazed area.

When Make Architects needed a waterproofing solution for their latest project in the City of London they turned to IKO PermaTEC hot melt. Waterproofing such an expansive and complex roof has its particular challenges and required robust and reliable detailing. The choice of waterproofing was to perform for a minimum of 30 years, be cost effective and also contribute towards the building’s design stage BREEAM Excellent rating.

This is a metal roof coating & refurbishment project using Liquasil's BBA Approved Metalseal 20. The project involved removing an existing cut edge corrosion treatment and re-treating with Liquasil SWT Corrosion Primer, followed by two coats of Metalseal. The whole roof was then coated with Metalseal 20 to provide long term protection against fungal growth and weathering. The unique 10 year, single-point latent defects insurance guarantee was issued at the end of the project. For details, speak to our building surveyors on 0121 709 5352

The new flagship outlet of Pioneer Foodstore in Carlisle was built to a high specification with the aim of significantly extending their client base. The planning application had to meet the requirement for a screen to conceal the roof-top services and air-conditioning plant.Italia-80V was proposed, which could be bent to a radius, to fulfill the vision for a semi-circular end to one side of the compound. The 2950mm high steel louvre panels were welded onto appropriately shaped RSA support rails at top and bottom, which were supplied with multiple holes for fixing to the posts to ensure perfect continuity of spacing. A double-leaf gate was also seamlessly incorporated by using a front fixing design.Lang+Fulton worked closely with the architect at an early stage to advise on the fixing points for the posts which would carry the screen. This ensured that the thermal barrier and waterproof membrane could be wrapped up the footings for a neat and effective installation.

House of Tomorrow Today... CHALLENGE + SOLUTION Before your imagination runs away with you: HoTT stands for House of Tomorrow Today. This new Dutch concept is based on both the Smart Building and Active House principles. It tries to gather recent innovations as well as new technological developments in one project, entirely in line with future market trends. From the very beginning HoTT gathers together all parties involved in order to have a smooth running building process and thus limiting the number of contacts and intermediaries. Compared with traditional building methods this optimal cooperation already results in at least a 30 % cost reduction. Also it is worth mentioning the construction itself - HoTT strives for prefabrication and modular building components, resulting in a decrease of project schedules, project budget and construction site waste. Although prefabrication had over time developed the stigma of cheapness and poor quality, it has nowadays been turned around into a green trend in construction. The first HoTT healthy home in the Netherlands has just been completed. Comfort, energy and technology are the main issues. It is a house with comfortable living conditions, a lot of natural light and fresh air, and, above all it is energy neutral, modular and durable, reducing its ecological footprint. Electrical wiring, plumbing and wall components can all be easily adapted for the future needs of the building. Both sloping roofs are prefabricated steel frame structures with insulation, vapour barrier and roof covering already included, allowing a fast and easy installation. The less sloping, south facing roof has a RENOLIT ALKORPLAN PVC roof covering, provided with aesthetic RENOLIT ALKORDESIGN roof profiles. Also part of the roof has solar panels which have been installed using RENOLIT ALKORSOLAR profiles. The building is being constantly evaluated by means of sensors gathering data to continuously improve and develop future HoTT buildings. The concept will not only be applicable for detached housing, further developments will also aim at terraced houses, schools, hospitals, etc. This project proves once again RENOLIT is a reliable “green” partner, a company that is responding to the growing demand for ecological products by offering sustainable building materials. It’s the first HoTT of hopefully many more...

Minimalist architecture and flexible design define the style of Casa Po, located in the Morobbia Valley. The architects designed the house with a principle of terraces, inspired by the historical vines and the mountain views.The top one is covered by a “regular, definitive and white roof, which covers the living area completely open to the panorama and orientated towards the light”, according to the architects.In this context, our O-Box roller blinds, located outdoors, help to create extra-outdoor spaces around the house. A type of in-between space is created when the shades are closed. Also, cable lateral guides allow an efficient operation and contribute to the sober aesthetic of Casa Po.O-Box system drops off the white rooftop as a key element in the project. 

Made-to-order Traditional Leaded Timber casement windows and doors from the Kensington & Chelsea range by Lomax + Wood, an approved supplier and installer of the Hampstead Garden Suburb Trust (HGST). Timber casement windows with traditional single glazed true leaded bars on front elevation Leaded lights and double-glazed timber casement windows to the side and rear elevations Made-to-order with 18mm 4/10/4 Krypton gas-filled slim units Custom Designs to replicate the existing windows Luxury Forged Bulb End handles Colour match F&B White Tie Supply and install service 25 casement windows 3 French doors

Twinfix have been working their magic to help Network Rail restore Kettering Railway Station to its former glory. They have been helped in this project by the Railway Heritage Trust (RHT). The Railway Heritage Trust was created in 1985 by British Rail on the advice of railway heritage campaigners following the destruction of Derby Midland Station. The RHT is an independent company which assists the operational railway in its preservation and upkeep of listed buildings and structures. Network Rail and National Highways (Historic Railways Estate) sponsor the work of the RHT which currently holds an annual budget for restoration work, ensuring that high quality and the best materials are used to restore and preserve assets. Kettering station was opened in May 1857 by the Midland Railway, on a line linking the Midland to the Great Northern Railway at Hitchin. The Midland later gained its own London terminus at St Pancras Station. In 1857 the leather trade was in recession with over half of Kettering’s population on poor relief. The railway enabled the town to sell its products over a much wider area and restored the town’s prosperity. Originally the station had a single platform but in 1879 the station was quadrupled, and three new platforms were built. The Midland Railway commissioned waiting rooms, cast-iron columns, spandrels, and canopies for the new platforms to match the original 1857 design by Charles Henry Driver. In the 1970s, the glass canopies became a maintenance headache for British Rail, who proposed removing the glazing along with the cast-iron column heads and replacing it with sheeting. Thankfully, Kettering Civic Society intervened and saved the canopies and columns. 50 years later these important architectural elements needed some refurbishment but faced another threat. The Midland Mainline electrification programme meant that structural changes would be needed to the canopy structures to allow the overhead line electrical equipment to be installed above the tracks. Once again, the canopies were under threat but this time it was Twinfix which came to the rescue. Twinfix, the Warrington based pioneers of polycarbonate were the specified experts in the Network Rail business plan for the station refurbishment. Having already helped bring new life and importantly light into old stations as part of refurbishment work, Network Rail stipulated using Twinfix’s polycarbonate roofing panels and their mounting system to keep the overall aesthetics of the station but add a much-needed resilience to the canopies.  Twinfix recommended their Multi-Link-Panel glazing with 6mm solid clear polycarbonate to help the restoration project. The Multi-Link-Panel is an innovative, modular system that is incredibly quick to install and outperforms more traditional systems in terms of cost, performance, and appearance. Multi-Link-Panel canopies consist of pre-assembled modular glazing panels, manufactured to size for each individual project. Each panel comprises aluminium structural bars that are glazed with lightweight, yet tough, solid polycarbonate. The aluminium can be powder coated to a range of colours for a rust and maintenance-free life. As panels are pre-assembled in a controlled factory environment possible contamination and errors in installation caused by on-site cutting of the glazing sheet are avoided. These properties can result in saving two thirds of the time taken to install traditional split bar glazing systems. This can save on labour costs and drastically reduce any necessary premises shutdown time required while work is carried out overhead.  The team at Everlast roofing who installed the Twinfix Multi-Link-Panel were a great partner in this installation process and this partnership resulted in a great finished roof.Handling during installation is easier and safer than with traditional glass systems as panels are constructed from materials that are both strong and light in weight. The reduction in weight compared with glass systems has the added benefit of lowering the overall weight of the roof construction, decreasing the stresses on the existing fabric of a building, especially important where a roof refurbishment is being undertaken. It is this weight reduction that removed the need for reinforcement of the original columns and resulted in the restoration remaining faithful to the original design. As Twinfix manufacture the multi-link panel system they are in an ideal position to be able to help with designing out potential problems. Each roofing system is unique and bespoke, so Twinfix took advantage of their deep understanding of their product and the legislation covering such projects and added access hatches to the canopies which allow access above the glazing for maintenance, finally curing that 50-year-old headache. Vicky Evans, Director at Twinfix said; “The result of the restoration is truly breath-taking. Kettering Station is now awash with natural light and the platforms are a light airy place to wait for a train and shelter from the elements.” Tim Hedley-Jones, Director of the Railway Heritage Trust, says of the project: “It’s a great example where the use of modern materials helps to protect and sustain a truly beautiful historic station. Our grants have helped Network Rail to preserve Kettering Station using Twinfix technology, to continue to make it fit for purpose for today’s rail passengers.” So, if Charles Henry Driver were able to see the station today, he would instantly feel a sense of familiarity and be proud of the restoration work on this piece of railway treasure. CREDIT: Photographs taken by Paul Childs, Spheroview

FOAMGLAS® Tapered T4+ (Slab)Design Architects: Renzo Piano Building WorkshopExecutive Architects: Adamson Associates, LondonMain Contractor: Mace; Roofing Contractor AC PLCConstruction: 2012Application: Warm Roof - FOAMGLAS® Tapered T4+ (Slab )Finish: Bitumen membranesFOAMGLAS® provided the ultimate solution for the roof maintenance platform of The Shard at level 75.Its light-weight and high compressive strength enable regular maintenance to be carried out without risk of surface damage.At 310 m, Shard Tower is one of Western Europe’s tallest buildings; exposed to extremes of temperature & the revolutionary structure sways up to 50 cm in high winds.The building maintenance platform on level 75 islocated directly above the viewing galleries, and essentially forms the Shard’s roof. To shed water, the flat metal platform required an insulation with a tapered top surface.In this extremely exposed location, and with significantloads upon the platform, a truly reliable solution was needed. FOAMGLAS® insulation combines compressive strength, long-term insulation performance.Using their "in house" CAD systems, FOAMGLAS® designed a bespoke Tapered Insulation system. Taking full advantage of its low coefficient of expansion, and to eliminate thermal bridging, FOAMGLAS® and its membranes were adhesive bonded onto the metal structure. The unique ability of FOAMGLAS® to withstand high compressive loads ensures regular maintenance work can be safely carried out without damage to the insulation or the membranes.Adamson Architects commented on this project: "FOAMGLAS® has proved itself to be the ultimate solution for the difficult loadbearing areas of the Shard. Specifying cellular glass insulation ensured complete integrity and performance in key areas of the Shard Tower".

Cranbrook Primary SchoolBauder Total Roof System (BTRS) with Tapered insulation schemeSynopsisCranbrook Primary School in Ilford, London, was experiencing some major water ingress due to the advanced deterioration of the existing roof system. A roof survey was conducted by Stuart Parratt, Bauder area technical manager, where core test samples were taken to identify the existing roof construction to deck level and to provide an indication of the roof condition. The survey revealed that the existing waterproofing was in extremely poor condition, with extensive evidence of water ingress.  Bauder Building BoardProject:Cranbrook Primary School Location:LondonProject Type:RefurbishmentRoof Area:440m² Client:London Borough of Redbridge Council Approved Contractor:Thameside Roofing Ltd The specificationThe original waterproofing had been poorly overlaid with EPDM which had subsequently debonded. Before the installers could begin laying the new system, they had to strip the substrate back to the original asphalt. The client required a robust system that would deliver durability, value and longevity. 390m² of bitumen waterproofing, Bauder Total Roof System (BTRS), was specified for the main roof areas and 50m² of our cold applied liquid waterproofing, LiquiTEC, for an area that had limited upstands due to clerestory windows that could not be repositioned. Products appliedBauderPIR tapered insulation  A lightweight and cost effective alternative method of providing falls to a roof, whilst also providing thermal insulation. The client opted for this scheme at Cranbrook to minimise standing water on the roof. Bauder Total Roof SystemA two-layer bituminous waterproofing system robust enough to withstand foot traffic and most permanently sited plant. For use within warm and cold roof scenarios, as well as overlaying existing roofing materials. BTRS meets current UK Building Regulations Part B for external fire protection and features torch-free and safe to torch installation on combustible details. LiquiTEC Cold Applied liquid waterproofing Utilising Bauder’s PMMA cold applied liquid waterproofing on one of the roof areas ensured a fully watertight solution around rooflights and below upstands that could not be raised.  Project challengesAlthough the deck appeared to be in a reasonable condition for reuse as part of the refurbishment, there were large deflections to some areas and the existing waterproofing that overlaid the original system had been poorly installed and had pulled away from the asphalt below and so needed stripping prior to works commencing. The existing insulation was inadequate and left the building falling short of the current requirements. A thermal upgrade was incorporated into the works using a tapered insulation scheme which helped to solve the deflection issues by creating falls on the roof. To meet the minimum upstand requirements, the existing extractor vents needed to be removed to allow for the increase in the kerb height. Large continuous structural rooflights providing natural light to the building below were deemed thermally inefficient. The rooflights were upgraded during the refurbishment to meet current standards.  The resultBauder systems are only installed by Bauder approved contractors to ensure quality. The installation on this project was expertly carried out by Thameside Roofing Ltd, overseen by Dave Gregory and John White. After sign-off from Bauder site technician, Paul Osbourne, this system was awarded a comprehensive guarantee.  Systems installedBauder Total Roof System (BTRS) with Tapered insulation1 Bauder K5KHeavy duty, torch-applied SBS elastomeric bitumen capping sheet featuring a spunbond polyester reinforcement to allow the finished product to cope with structural movement without fracture, and a mineral finish to provide protection against UV degradation.2 BauderTEC KSA DUO Technically advanced self-adhesive SBS elastomeric bitumen underlayer with “DUO” lap technology to ensure thorough sealing of lap joints, even in lower temperatures. 3 BauderPIR FA G16Tapered PIR Insulation board manufactured in accordance with BS EN 13165 with no facings. It is lightweight with a high compressive strength and has zero Ozone depletion potential. The product provided effective drainage as well as efficient thermal insulation.4 BauderTEC KSD FBSA technically advanced, self-adhesive SBS elastomeric bitumen air & vapour control layer, with a mica finish on the upper surface to allow easy bonding of insulation using the specified Bauder Insulation Adhesive.

Project: Surespan designed and manufactured these huge electrically operated sliding glazed roof hatches also provide free airflow of 7m² for smoke ventilation!These bespoke designs were part of a redevelopment on Great Portland Street in London. The covers were 4610 x 1955mm and featured an electrically driven opening motor.Product:The covers provide 7m² free airflow (As it is sliding there are no obstructions to the ventilation) according to approved document B (fire safety) paragraph 5b diagrams C.7.The glazing features laminated and heat-strengthened low iron glass to L40.A further fixed rooflight was also supplied to the size of 4935mm x 1955mm, the thermally broken multi-pane rooflight provides natural daylight

Editorial on dry fix roofing and the factors to consider when making a product choice.

SubFloor Outdoor Flooring was used to help renovate and raise a 650 m² roof into an outdoor terrace in Västerås, Sweden.This was built on top of the existing roof felt and used high-quality pressure impregnated wooden joists to create an even surface, level with the rest of the building. The joist and screw system allows for quick and easy assembly so that the floor can reach the desired height.Products:Pre-treated Wooden Joist 45x70x3600 mmSubFloor Screw 300 mmSubFloor Screw FootHeight Variation: 90 - 339 mmJoist separation: c/c 300 mmSystem Weight - c/c 300 mm: 10.72 kg/m²Materials:Pine T0-C24Fibre-reinforced polypropylenePolyamidePoint Load Limit (50 x 50 mm):Load next to screw over joist edge - 21.74 kNLoad between screws over joist edge - 16.43 kN

No timber was allowed as part of the new refurb to conform to FM Global (Airbus Insurers) regarding system fire rating. IKO recommended an overlay on the existing deck, which complied with all the latest British Standards and Regulations. IKO Mach One System was chosen as it provided a flame-free System. Where detailing was difficult IKO Polimar EC/UV System was used. The roof refurbishment also included the installation of smoke vents, associated smoke control panels and accessories.

Tew Farmhouse and Barns, Oxfordshire was a conversion of a Grade II listed farmhouse into six luxury holiday lets.Working to the client's brief, the Architectural Designers at Charlie Luxton Design scoped out the design of the luxury accommodation to achieve a high-quality finish whilst retaining the idyllic barn-like character.The rooflights needed to align with the design concept externally, integrating seamlessly with the zinc roof, whilst contributing to the airy and light interior design. Neo Rooflights were selected for their frameless interior and edge-to-edge glazing technology to maximise the viewable space and flood the top floor rooms with natural daylight.The technical design team at The Rooflight Co helped to marry vision to solution by creating a bespoke baseplate that provided the level of detail required to ensure the rooflights work alongside the roof, not simply sit within in. The technical team also advised egress Neo Rooflights to provide a means of suitable fire escape access and ensure the buildings conformed with building regulations.The Neo Rooflight demonstrated its suitability to be used within the Grade II listed farmyard within the context of it originally being a historic non-domesticated building. The rooflights were not only practical within the design, but the appearance was in keeping with the aesthetics of the times.

An office building in Manchester has a large roof terrace area that was incorporated into the building wide refurbishment. They wanted to increase the usability to the terrace by adding outdoor furniture to encourage employees to use the space for interacting and getting fresh air. The Parallel42 benches were chosen due to their flexibility and contemporary look which would complement the terrace space and provide ample seating. The Benches were installed free standing for ease of positioning and can be rearranged as required. EY now has a usable terrace area that is enjoyed by many of the company’s employees.

The Polden tile has been used on various sites in Scotland as a slate solution. With its riven finish and mock bond the tile gives a true natural look but still has all of the benefits of a concrete interlocking tile.

Gloucester Transport Hub Bauder Thermofol PVC single ply waterproofing system SynopsisThe replacement bus station and regeneration of the surrounding area has created a unique and distinctive city centre building for the town. The design connects with Gloucester’s Roman heritage and association with aviation. The innovative roof design incorporated a canopy intended to reflect an aircraft wing that required a lightweight waterproofing and renewable energy photovoltaic (PV) solution.Bauder Building BoardProject:Gloucester Bus StationLocation:GloucesterProject Type:RefurbishmentRoof Size:1520m²Constructor: Kier Group PlcApproved Contractor:Kovara Projects LtdThe specificationThe Bauder Thermofol PVC single ply waterproofing system with the BauderSOLAR F PV solution met the brief precisely without compromising the aesthetics of the roof. This combination of Thermofol PVC single ply waterproofing system and BauderSOLAR F PV delivered a high quality, strong, energy efficient flat roof.This system was selected for the project because of its lightweight properties which complemented the deck and roof design. Light grey was chosen to reflect the colour of the cladding as the aesthetics was a key objective for the client.The OMG Rhinobond induction welding system was specified as the installation method which provided multiple advantages to the project, not only saving time and fasteners, but also optimising the field fix pattern of installation and ensuring that the load on the roof was spread between the induction welding plates. Products appliedBauder Thermofol U15 FR MembraneA high grade virgin polymer Thermofol PVC membrane ensures the optimum membrane characteristics to deliver high performance and a BBA stated life expectancy in excess of 35 years.BauderSOLAR F An aerodynamically optimised system for flat roofs using framed modules and mounting units, securing them to the roof using membrane-to-membrane welding techniques. This installation method means that the roof is not compromised by penetrations of fasteners or is it ballasted.Project challengesThe design of the Transport Hub and city centre location proved to be the key challenge to this project. The unusual roof configuration required a bespoke insulation scheme using BauderPIR M, an efficient rebated PIR insulation board, in order to achieve the required U-value of 0.18W/M²K.The deck configuration equally made the installation of the Bauder Thermofol PVC waterproofing system complex with the perimeter zone having to be carefully marked in compatability the wind calculation which included measuring factors such as wind speed, altitude, direction and exposure. Bauder and Kovara Projects were required to work closely together to ensure all criteria of the wind calculations were met. 40 modules of the lightweight BauderSOLAR PV solution were installed on the west side of the Transport Hub’s roof.The location of the project, Gloucester city centre, presented logistical challenges. Delivery of the roofing products had to be carefully scheduled and managed to avoid creating congestion in the area.The resultThe installation required constant co-operation and communication to embrace the live site operations within the restricted city centre location whilst allowing the bus station to remain fully functional. The roofing contractor delivered a superior standard solution and any complex issues that arose during the project were resolved promptly and collaboratively.System installedBauderThermofol PVC single ply waterproofing system  1 Bauder THERMOFOL U15 FR1.5mm polyvinyl chloride membrane (PVC) reinforced with a pre-coated polyester cross-weaved matting for mechanically fixed installations. 2 BauderPIR MThis efficient tissue-faced flatboard insulation has been specially developed for use within Bauder single ply systems. 3 BauderSYN DB-PE 100A blue, polyethylene air and vapour control layer. The product is installed by loose laying and suitable for Thermofol mechanically fastened and ballasted single ply systems.

Armourplan PVC and Recticel Insulation by SIG Design Technology were selected for a 12,000 m2 roof to a bottling plant in a rural location on the outskirts of an historical Derbyshire spa town, known as Project Merlin. The FMCG company chose to build the new facility away from the site of the natural spring, piping the water some two miles out of town to this green field bottling and distribution site.

Sika Liquid Plastics has specified and supplied a roof upgrade solution for West Suffolk Hospital to renew the waterproofing membrane on multiple areas of the hospital campus and create a gradual pitch to aid drainage while enhancing the building’s thermal performance. Delivered by specialist contractor, Allard Construction, the phase four programme included seven sections of the building in a 20 week programme. The seven areas that needed work were all under heavy coverage of mechanical plant and pipework, and consequently there were large areas of restricted access, these issues made Sika Liquid Plastics the perfect choice for the project

Gent Sint-Pieters railway stationCHALLENGE Gent Sint-Pieters, the main railway station in Ghent, is undergoing a spectacular metamorphosis today. The listed main building, constructed for the 1913 World Exhibition, has to remain untouched. Behind the old building however the platforms, waiting rooms and the central passengers corridor are being entirely refurbished. Architect Voncke’s objective was to create a pleasant atmospheric site with a 35,000 sqm open and attractive central hall, broadened and completely covered platforms and renovated rails. Functional, well-designed and above all spacious! As the 12 rail tracks had to stay on ground level, the passengers alley was excavated to a lower level under the railroad tracks. This necessitated permitting considerable daylight to enter the underlying levels.SOLUTION Transparent canopies, featuring large glass sections and translucent floors were all designed with this purpose in mind. To gain even more light the architect chose RENOLIT ALKORBRIGHT for waterproofing the platform canopies. The six long rectangular platform blocks, differing in height, are interconnected and make one large roof. The white highly reflective RENOLIT ALKORBRIGHT membrane on top of the construction reflects the daylight through the high side windows. A clever way to add extra day-light to the underlying areas. 

The former ToysRUs premises in Luton required complete refurbishment and part of the project involved renovation of the metal roof. Liquasil's BBA Approved Metalseal 20 system was specified because it includes the advanced, SWT Primer to treat cut edge and spot corrosion in-situ. The metal gutters were lined with Liquasil's Gutterseal, seamless liquid gutter lining system. Upon completion of the metal roof coating project, the unique, Liquasil Latent Defects Insurance Guarantee was issued. The Liquasil guarantee includes cover for Professional Design, meaning that you can specify Liquasil products with 100% confidence.

LAMILUX designed, supplied and installed both the supporting steelwork and atrium glazing to illuminate the central zone of the venue with natural daylight. Structural calculations were generated to ensure that the steelwork, which was assembled from five sections, could withhold the weight of the high spec glazing used. 76 fixed panes, walkable for maintenance and weighing 65kg per m², create the 20m x 9m wide unusual curved glass roof with wall abutment detail. 3 anchor points, which forms part of the rooflight system, were installed so that maintenance personnel are able to fix their safety harnesses onto the anchor points.

The Sixtine room, near to the chapel of the same name in the Vatican welcomed an exposition of fabulous old religious art objects. Branko Siladin used Structural Barrisol Lumière as luminous support for retables and crosses, luminous base for chests and luminous showcase for statues. This structure was perfectly adapted in this historic place creating a harmony between the prestige of a place and the prestige of a product.

Zaha Hadid, english-iraki architect, first female recipient of the Pritzker Architecture Prize in 2004 (Nobel Prize of architecture), just ended in Rome the creation of the MAXXI: National Museum of the 21st Century Arts. Barrisol® Lumière® (a luminous stretch ceiling) has been installed in this historical and contemporary museum. (credits : Zaha Hadid Architects© 2009, photograph : Roland Halbe & Helene Binet) Architect : Zaha Hadid

A world-class space for sport, events, and education using out Topperfo Micro perforated panels. The indoor sports facility has utilised one of our wall systems to combat sound reverberation, voice intelligibility and to lower the sound pressure levels typically created in such a large hard surfaced area.

Heritage colours and kerb-side appeal were among the factors that persuaded local planning authorities that Modus PVC-U windows were the appropriate alternative to timber on a prime, exposed location near the UNESCO World Heritage Site.Consisting of 136 upmarket homes selling at up to £1 million apiece, the Ensleigh Estate was being developed by Bloor Homes, along with another major housebuilder, on a former MoD site dating from WW2 that overlooks the Georgian city and is near to its race and golf course.The planners originally wanted timber windows but that didn't work for the developer who wanted matching fascias and soffits. As the site is exposed at the top of a steep hill they wouldn’t look great for very long.

Traditional-style timber windows and doors from the Conservation™ range by Mumford & Wood have been specified for an impressive new-build property in the much sought after village of Danbury in Essex. The village dates back to medieval times and today has extensive woodland and heath owned by the National Trust and other conservation organisations.

High-performance products from the A. Proctor Group, experts at solving condensation, airtightness and energy efficiency problems in buildings have been selected for use in the construction of a British Antarctic Survey building.The BAS Signy Cummins Hut is designed to provide a fully fabricated, fit for purpose hut, which can be easily erected to provide short-term accommodation for two British Antarctic Survey operatives to carry out incredibly valuable research in extreme polar conditions.Main Contractor, Mike Robinson of Rothwell Robinson, Manchester explained. “Due to the extreme conditions, we wanted to ensure that only the highest performing products were used on the project. In light of the extreme temperatures involved, we approached the A. Proctor Group who carried out a full condensation risk analysis.“Following the risk analysis, the recommendations adopted included Roofshield® for the roof and Procheck® 500 as a VCL for the walls.”“Another key factor was that the chosen components needed to be lightweight to be carried from the shore to their final location on the island.”Roofshield is an air and vapour permeable, highly water-resistant roofing underlay that has been made to the same high specification for over 20 years. The products reliable performance has been demonstrated in the toughest locations around the world. Its characteristics allow even very complex pitched roofs to breathe, without the need for air gaps or secondary venting.Many vapour and air permeable underlays use an airtight VP film layer to achieve their performance, whilst Roofshield’s patented SMS (Spunbond Meltblown Spunbond) structure allows high levels of airflow, in addition to the transport of moisture vapour, making the formation of condensation in the roof space virtually impossible. It has an extremely high degree of vapour permeability, as well as air permeability, so will still perform in conditions in which air tight alternatives will not.Procheck 500 is a strong reinforced polyethylene vapour control layer, for use within roof and wall constructions to prevent warm, moist air escaping from inside the building and condensing within the insulation. The woven extruded polypropylene multifilament scrim reinforcement provides exceptional tear resistance and robustness to withstand the toughest conditions.

The £440m redevelopment of Westgate Oxford shopping centre, Furnitubes designers worked with landscape architects LDA Design to develop a series of planting and seating solutions for the rooftop terraces, designed around a kitchen garden concept and creating a series of unique outdoor spaces for 12 bars and restaurants and offering impressive views of the Oxford skyline and the countryside beyond. Themed areas include the sinuous Crinkle Crankle, a Vegetable Garden and the more formal Garden Court as well as the Kitchen Garden itself. Planters were manufactured predominantly in steel, some with additional timber cladding, others with integrated seating and lighting.

ProjectSurespan designed and manufactured these huge electrically operated sliding glazed roof hatches also provide free airflow of 7m² for smoke ventilation!These bespoke designs were part of a redevelopment on Great Portland Street in London. The covers were 4610 x 1955mm and featured an electrically driven opening motor.Product: The covers provide 7m² free airflows (As it is sliding there are no obstructions to the ventilation) according to approved document B (fire safety) paragraph 5b diagrams C.7.The glazing features laminated and heat-strengthened low iron glass to L40.A further fixed rooflight was also supplied to the size of 4935mm x 1955mm, the thermally broken multi-pane rooflight provides natural daylight

This is an example of an asbestos roof cleaning and coating project using a closed box pressure washer and the BBA Approved Asbestoseal asbestos roof coating system from Liquasil. Specify Asbestoseal with confidence, as it's the only BBA approved system on the market for this purpose. It also comes with the unique Liquasil Latent Defcts Insurance Guarantee, including cover for Professional Design. Need more information? See our NBS specification or call 0121 709 5352. Liquasil is owned and run by Chartered Building Surveyors. We will help you with your specs!

The Pavilions comprise of seven residential buildings alongside the railway, providing a mix of 156 one, two and three bedroom sustainable homes with 35% affordable housing. As a site of Importance for Nature Conservation (SINC), this 'Development of the Year’ maximises the residential capacity without compromising the nature conservation designation. This is achieved by incorporating an educational nature trail and bird hide, with generous open spaces planted with trees, green roofs to encourage biodiversity, and solar panels. Cellecta’s ScreedBoard 20 was specified by Jestico + Whiles as it is a dry light weight Robust Detail solution compatible with Metec System LGS system, and the ideal overlay floorboard for acoustic application incorporating underfloor heating applications due to its high thermal conductivity. This enables the system to run more efficiently, saving on running costs and improving reaction times.Telford Homes was awarded this 14,350m² contract for this development at Caledonian Road in Islington.

In May 2017, the Main Building which housed the lounge, dining, reception area, and the Taphuis Bar, was gutted in a fire. Only the walls were left standing and all of its contents were destroyed. Because of the historic significance of the building, the project team needed to move through a strenuous process of permissions and approvals to start the rebuild. Part of the brief, was to ensure that as far as possible, original materials would be used, that would reflect the previous look and feel, making the sourcing and availability of crucial importance. This building in particular, dates back to the early 1700's and finding timber for the roof structure was a challenge. They decided to use Spruce.The biggest drawback of using Spruce is that it is a very light and pale coloured timber. To achieve the aged look and feel of the original timber, they used Rubio Monocoat's Pre-Color Easy and Hybrid Wood Protector.

The centrepiece of the building at 80 Fenchurch Street is a stunning glass atrium that spans the entire length of the core structure, flooding the lower floors with natural light and providing a breath-taking arrival experience when entering the building’s lobby.Radii AG were commissioned to utilize their intricate knowledge of glass to produce a dynamic, multi-storey frameless glazed atrium that matched the ambitious design intent.An additional consideration was for the atrium to accommodate the stepped, angular elevation changes due to the terraced roof gardens on the top five levels.The finished atrium at EightyFen epitomises Radii AG’s core philosophy of extracting the full capabilities of glass as a building material.Structural, acoustic and fire rated performance all formed a part of the finished installation, allowing Radii AG to provide a bespoke, technical solution alongside dramatic visual aesthetics.

Trafalgar Place, London designed by De Rijke Marsh Morgan Architects (dRMM) is a Stirling-award shortlisted mixed-use project designed as part of the Elephant and Castle regeneration. It offers 235 homes set within a reinvigorated area, designed to replace 1960’s era mega blocks. Each new home comes with its own garden, balcony or roof terrace and has been designed to maximise light and space.A rich combination of MBH PLC’s Freshfield Lane clamp-fired Danehill Yellow, Anthracite, Selected Lights, Selected Darks and First Quality Multi bricks were used to create a stunning vertical gradient that helps to both blend in with the established vernacular while creating a modern identity befitting such an expansive redesign of the area. FabSpeed blended all the brick special products which had to be meticulously coordinated and blended to achieve the gradient colour change on the main facade.Additional care was given to the landscape, with pre-existing trees integrated into the project and a variety of open spaces created to allow residents to find solace amongst natural environments despite the site’s proximity to the wider city.Trafalgar Place won the ‘Best New Place to Live’ and the ‘Mayor’s Award for Planning Excellence’ at London Planning Awards, in 2016 and Best Housing Design Award at the 2015 Brick Awards.