NBS Source
I'm a manufacturer

"rainwater goods roof drainage systems"

6,897 results found

Sort by:

Showing 361-396 of 1998

Sponsored
Case Study - Proteus Pro-System® - Emma House

Case Study - Proteus Pro-System® - Emma House

Proteus Waterproofing

Emma House, Romford, a residential apartment block built in 2007, needed a new waterproof membrane for the entire roof area after the single ply membrane, installed just 10 years earlier, had failed. The specification by our clients asked for a cold applied system to be used during the refurbishment to minimise disruption to residents, while providing a permanent waterproofing solution.The ChallengeCore samples taken of the roof build-up showed there had been extensive water penetration which required urgent remedial action. Impossible to repair, the complete roof system had to be stripped back to the roof deck by Proteus Waterproofing’s approved contractor. The approved contractor installed a new Proteus Pro-System® BUR (built up roof system) incorporating Proteus Pro-Therm insulation, to provide a new seamless roof – an area of some 150 square metres – offering a 20 year guarantee.Why Proteus Pro-System® was specifiedProteus Pro-System® was installed using no heat, providing a seamless waterproofing membrane on completion. Proteus Pro-System® is a high performance, seamless and cold-applied waterproofing membrane for flat and pitched roofs. It cures to provide completely seamless waterproof protection and has excellent thermal and UV stability, making it suitable for use in all climates.Proteus Pro-System® does not brittle, deteriorate or discolour with age. It uses atmospheric moisture to trigger its cure process and unlike conventional polyurethane systems can cure under water, without gassing or foaming. It also becomes resistant to rain damage and may therefore be applied in relatively poor weather, without any subsequent loss of performance or durability – making it ideal for Emma House.About Emma HouseEmma House consists of 14 one-bedroom and 19 two-bedroom apartments just minutes away from the centre of the market town of Romford, which offers shops, services and a wealth of bars and restaurants. When first built in 2010, Emma House offered young professionals an opportunity for affordable housing close to London and has remained at the forefront of the property market in Romford ever since.
Sponsored
St Alphege Church gets a refresh with Glendyne

St Alphege Church gets a refresh with Glendyne

Burton Roofing Merchants Ltd

Historic Kent landmark St Alphege Church gets a newly refreshed roof in keeping with its age and character thanks to Glendyne.
Sponsored
Arts University, Bournemouth

Arts University, Bournemouth

Senior Architectural Systems Ltd

Sustainability and design were the major focus for this new £24 student accommodation project which achieved a ‘Very Good’ BREEAM rating. Senior’s highly thermally efficient glazing package was chosen to meet the scheme’s sustainability criteria and budget. This included thermally enhanced SPW600 windows fitted with a Louvre Guard System in bedrooms and kitchens and with smoke vents in corridors for additional safety and security. With their innovative thermal break offering exceptional thermal efficiency, PURe® Commercial Doors were installed at the security office whist PURe® SLIDE Lift & Slide doors were specified for the large communal area.
Sponsored
Luxury Hotel Bathrooms - Hyatt Blackfriars

Luxury Hotel Bathrooms - Hyatt Blackfriars

Wedi Systems (UK) Ltd

Grade II listed hotel in the heart of the City of LondonHyatt Regency London Blackfriars is located in the historic Square Mile, directly outside Blackfriars station, and is a short stroll from St. Paul’s Cathedral, the Tate Modern and Shakespeare’s Globe Theatre. The Grade II-listed five-star hotel is steeped in regal history, residing on the former grounds of King Henry VIII's Bridewell Palace.195 rooms had wedi XPS shower tray formers (the wedi Fundo Riolito neo) featuring a linear drainage channel with continuous slope right to the channel and more flexible adjustment for tiling. Providing a complete abP-approved, CE marked and BBA accredited waterproof system, removing the need for labour intensive tanking because no further sealing is required.
Sponsored
Remedial Waterproofing - Commercial Structure

Remedial Waterproofing - Commercial Structure

Delta Membrane Systems Ltd

Waterproofing design is a key and critical component for successful construction of below ground structures. Whether it’s a completely new build or making smaller changes to an existing property, waterproofing design should never be overlooked.Waterproofing might account for just a small fraction of a building’s total cost, but waterproofing defects can result in catastrophic consequences. When waterproofing fails, the implications are significant.Delta’s MD, Kevin Dodds was approached to offer advice and guidance on a failed waterproofing system.The existing structure had an impressive 5-level basement which houses: kitchens, food storage and food preparation areas, spa, plant rooms and accommodation. Near to a large river, the site sited well within the water table. The original waterproofing system was based on the secant piled walls and a block wall internally to provide a basic drained protection system with drainage holes at various points to drain to various levels.Over time, the third floor had become completely saturated with all levels of the basement experiencing water ingress in varying levels from damp patches to significant “jets” of water and flows of water through the secant piles.With remediation waterproofing design strategies, it may take some time to specify a suitable system. It is important that investigations are thoroughly carried out by individuals with the capability of diagnosing the defect, assessing the extent of that defect, and recommending a suitable corrective measure.
Sponsored
M-Tray®  Green Roof super fast installation

M-Tray® Green Roof super fast installation

Wallbarn Ltd

This project involved a high-rise office being refurbished. Being in the Central London and nearing completion meant a busy site. Ultra fast and mess-free installation was essential. M-Tray®’s were delivered to site on pallets and quickly unloaded. The M-Tray®’s stackable design meant it was easy to transport through the (finished) building and elevator. The individual trays were then carried up the final flight of stairs to the rooftop. As the trays simply clip together they are quick and easy to install. In just 4 hours a the roof space was transformed into a green roof.
Sponsored
POSIglaze Installation at Cornish Home Renovation

POSIglaze Installation at Cornish Home Renovation

Pure Vista Ltd

A small farm cottage in a Cornish Village has been transformed with a stunning large modern extension and balcony.The team of Camel Glass installers have been heavily involved in this home with the installation of windows, doors and the glass balustrade. This home is situated on the grounds of an old quarry, with views over the valley towards an engine house. The customers wanted to be able to enjoy their view to the maximum and using glass balustrade provides a safe and solid railing. This home is highlighted throughout with copper oxide furnishings, the front door and elements of the kitchen follow this theme while the sink splash back is made from glass petals in a beautiful glass meadow scene. The balcony glass was the last outside job to be done, having to wait for the kitchen counter to be installed through the French doors it was safer to install the glass after this had been carried over the balcony. Now that winter is coming the indoor jobs can be finished off and the home owners can enjoy their newly renovated home! This installer has used POSIglaze base-fix in black. Balcony Seal® has also been used to ensure water can run off the balcony under the channel without causing water ingress. Most balconies and flat roofs are built with a slight pitch to encourage rainwater to drain towards the edge of the roof. In these cases, the balustrade installer needs to allow for drainage points under the channel, to avoid water pooling around the edge of it. The Balcony Seal® system works by subtly raising the channel a few millimeters above the substrate on drain blocks. Notches on the top side of the drain blocks locate into the rebates of the POSIglaze channel, locking it into position before the system is bolt-fixed to the substrate through each block. 
Sponsored
Balcony Seal Installation

Balcony Seal Installation

Pure Vista Ltd

A small farm cottage in a Cornish Village has been transformed with a stunning large modern extension and balcony.The team of Camel Glass installers have been heavily involved in this home with the installation of windows, doors and the glass balustrade. This home is situated on the grounds of an old quarry, with views over the valley towards an engine house. The customers wanted to be able to enjoy their view to the maximum and using glass balustrade provides a safe and solid railing. This home is highlighted throughout with copper oxide furnishings, the front door and elements of the kitchen follow this theme while the sink splash back is made from glass petals in a beautiful glass meadow scene. The balcony glass was the last outside job to be done, having to wait for the kitchen counter to be installed through the French doors it was safer to install the glass after this had been carried over the balcony. Now that winter is coming the indoor jobs can be finished off and the home owners can enjoy their newly renovated home! This installer has used POSIglaze base-fix in black. Balcony Seal® has also been used to ensure water can run off the balcony under the channel without causing water ingress. Most balconies and flat roofs are built with a slight pitch to encourage rainwater to drain towards the edge of the roof. In these cases, the balustrade installer needs to allow for drainage points under the channel, to avoid water pooling around the edge of it. The Balcony Seal® system works by subtly raising the channel a few millimeters above the substrate on drain blocks. Notches on the top side of the drain blocks locate into the rebates of the POSIglaze channel, locking it into position before the system is bolt-fixed to the substrate through each block. 
Sponsored
Windsor Castle Roofing Project

Windsor Castle Roofing Project

Penny Hydraulics Ltd

As Royal Warrant Holder, Penny Hydraulics are responsible for the installation and maintenance of all Royal Household chandelier raising and lowering systems across London. Designed to provide fast and safe access to suspended luminaires for cleaning and maintenance, chandelier winch systems are widely used throughout Royal properties.
Sponsored
Holt Farm: Safe Work Access to a New Roof

Holt Farm: Safe Work Access to a New Roof

MSA Safety (Latchways) – Fall Protection

Covering an area of nearly two acres (7,600 m2), the Holt Farm dairy complex includes two large and three smaller cattle buildings used for milking, housing, feed storage, offices, and viewing gallery. The complex typically houses 240 dairy cattle, yielding an average of 7,500 litres per year that is supplied to a nearby dairy processing facility. Holt Farm’s dairy complex is L-shaped with five interconnecting ridge-roofed buildings that create four internal valley gutters. The original fibre cement roof with badly yellowing old-style roof lights had deteriorated and suffered storm damage; the owners decided that a cost-effective new roof was required.
Sponsored
Rhepanol selected for the three distinctive green roofs at Dartmoor home

Rhepanol selected for the three distinctive green roofs at Dartmoor home

AccuRoof

Green innovation was at the forefront of designs for a stunning, award-winning family home created at Manaton, in the heart of secluded Dartmoor. Rhepanol hg was selected for the three distinctive green roofs that help to shape the character of the large, four bedroom Devon property, which incorporates a raft of measures to minimise its environmental impact.
Sponsored
Porcelain Roof Terraces, Greenford Quay, London

Porcelain Roof Terraces, Greenford Quay, London

Brett Landscaping

Greenford Quay is one of the UK’s largest ‘Build to Rent’ schemes with 1,965 new homes being built across seven main buildings. The aim of the development is to create a vibrant mixed-use neighbourhood at the side of the historic Grand Union canal. More than 1400m2 of GeoCeramica® has been installed across the communal areas of the £151 million Greenford Quay development, with 150m2 used to provide a highly aesthetic finish to the communal roof terrace on the tallest tower in the scheme. To view the whole case study please click the link below.
Sponsored
IKO Armourplan PVC single ply roof membrane - Arnold Hill Academy Nottingham

IKO Armourplan PVC single ply roof membrane - Arnold Hill Academy Nottingham

AccuRoof

The £14m Arnold Hill Academy is part of the Priority School Building Programme (PSBP) and is being constructed adjacent to the existing school in Nottingham. The new Academy’s 3,570m2 flat roof covers 8,200m2 of replacement teaching space, science labs, an indoor sports hall and a drama studio. The project team at Wates Group had already identified potential roofing products. Due to the unconventional roof specification they asked SIG Design & Technology to recommend a product that would work in tandem to deliver the required performances.
Sponsored
Metal roof & parapet coating project using Metalseal 20 from Liquasil

Metal roof & parapet coating project using Metalseal 20 from Liquasil

Liquasil Ltd

This project involved the removal of the existing factory finish to an industrial unit in the West Midlands, followed by cut edge corrosion treatment and full roof & parapet coating. Once the original finish had been removed using high pressure jet washing, all of the end laps to the roof sheets were coated with SWT (Surface & Wet Tolerant) corrosion primer, to prevent further rusting. Once cured, the roof was coated with the BBA Approved Metalseal 20 to a film thickness of approx 300 microns.
Sponsored
JFK Arboretum, Co Wexford, Ireland. RE-ROOF of visitor centre

JFK Arboretum, Co Wexford, Ireland. RE-ROOF of visitor centre

PREFA UK Ltd

Dedicated to the memory of John F. Kennedy, whose great-grandfather, Patrick, was born in the nearby village of Dunganstown, this arboretum near New Ross, County Wexford, contains a plant collection of presidential proportions. The Arboretum was established in 1968, following a visit by Kennedy whilst President to the area in 1963, and it covers 252 hectares and contains over 4,500 types of trees and shrubs from all temperate regions of the world. A visitor centre houses engaging exhibitions on JFK and on the Arboretum itself. The original structure at the heart of the Arboretum is a masterclass in timber post and beam construction, although the exposure to weather in the south of Ireland provoked some deterioration in the building fabric and to the original roof. PAC DESIGN STUDIO, Dublin, were appointed by the Office of Public Works to survey and establish a contract for fabric replacement and repairs to this beautiful structure, which were completed in 2021. The original roof was replaced and the new roof now features PREFA PREFALZ P.10 Dark Grey Standing Seam. A & A Quinn Roofing Solutions Ltd, Wexford, carried out the installation of the PREFA PREFALZ to the new roof.
Sponsored
Case Study: M7 Roof Terrace

Case Study: M7 Roof Terrace

RYNO

The screened rooftop garden which sits atop the new Westfield M7 commercial office development offers outstanding views out over London's skyline. PaveRail™ substructure system from RynoPaveSupport was used across the terrace. With a build-up of over 400mm to finished floor level and high-levels of foot-traffic, PaveRail will stay completely rigid and keep slabs in place.
Sponsored
M-Tray® Instant Green Roof - Safeway Towers, Vancouver, Canada

M-Tray® Instant Green Roof - Safeway Towers, Vancouver, Canada

Wallbarn Ltd

Our client was a major nursery stock grower in British Columbia with a very large sedum green roof project in Vancouver. The architect was concerned about future-proofing the green roof and wanted to ensure that, if ever they had issues with their waterproofing seal or any other aspect of the structure, the green roof could be taken up without too much disruption. It was decided that a modular solution would be the best route. M-Tray® was included in a worldwide competition to find the most suitable modular design and was judged as the best product available.
Sponsored
Paxman Avenue Secondary School

Paxman Avenue Secondary School

Bauder Ltd

Paxman Avenue Secondary SchoolBauderflex bituminous waterproofing system with Euroglaze rooflightsSynopsisPaxman Avenue Secondary School is a new build project situated in Colchester, Essex. The school opened its doors for the first time in September 2019 welcoming 180 year 7 students. It is expected that the school will eventually hold 900 pupils by 2023.Bauder Building BoardProject: Paxman Avenue Secondary SchoolLocation: Colchester, EssexProject type: New buildRoof size: 2500m²Architect: Concertus Design & Property ConsultantsMain contractor: Barnes ConstructionApproved contractor: G.R.M Roofing Company LtdThe specificationThe main contractor, Barnes Construction, was looking for a durable, cost effective roof with longevity, and wanted a waterproofing system which included a comprehensive guarantee with great service and full support from the supplier, and so Bauder’s bituminous system, Bauderflex, was specified. Rooflights were also specified to increase natural light into the building.Bauder’s Rainwater Calculation Software was also used to perform calculations in accordance with BS EN 12056-3:2000 based upon provided data relating to the building’s dimensions, geographical location and the flow rate performance of the selected Bauder rainwater outlet product. This helped to determine the total number of outlets needed for the roof.Products appliedBauderflexA reinforced bituminous membrane system with a choice of self-adhesive and torch-applied membranes that are resistant to high levels of structural and thermal movement. Bauder Euroglaze rooflightsThese rooflights are made to order and the size can therefore be tailor made to fit any roof aperture, with many ventilation and glazing options are available to meet the demands of any type of project.The resultThe client was supported by the Bauder Area Technical Manager, Andy Leggett, from start to finish with help being provided on the design element of the project, and the Bauder approved contractors, G.R.M Roofing Company Ltd, were supported by Bauder site technicians throughout the installation.
Sponsored
Erith and East Ham Fire Station

Erith and East Ham Fire Station

Langley Waterproofing Systems Ltd

The purpose: Energy savings of £¼million over 20 years at just two of its sites are predicted to be achieved by London Fire Brigade through effective roof refurbishment using our Roofing Solutions. The brigade identified that the roofs at Erith and East Ham Fire Stations were in need of refurbishment. Numerous intermediate repairs had already been undertaken. An efficient solution was needed to help London Fire Brigade optimise best value in its asset management and reduce its requirement for planned- or unplanned- maintenance.London Fire Brigade therefore turned to Currie & Brown construction management consultants to oversee the design and execution of the refurbishment projects under a contract management framework agreement in place between the two organisations. We was called in to assess the roofs and advise on a course of action. Data driven roof condition reports from surveys were taken across the two premises. We highlighted that the roofs were beyond economical repair and needed new waterproofing and insulation- a U value of 5.00W/m2K was discovered in one roof area, against the Regulatory threshold of 0.35W/m2K and best practice 0.18W/m2K. Our solution: We advised that in the main, overlaying of the existing roof covering with CP-20 Paracoat Cold Polyurea Liquid System (warm roof) application was the most-efficient and cost-effective solution.The over-laying using the CP-20 system satisfies London Fire Brigade’s policy of preference for flame-free, with no roof replacement needed this minimised waste to landfill.Our Approved Contractor CWG Group won the contracts to undertake the upgrading, working to Langley’s detailed individual specifications for each site.At East Ham Fire Station, four main roof areas plus a separate ancillary building were addressed.LangGuard free-standing safety rail was installed around the perimeter of roofs 1 and 4.The final touch for the field roof area was provided with Paracoat Fast SF slip-inhibiting finish to agreed walkway areas.At Erith Fire Station, the refurbishment involved upgrading two roof areas including a rooftop tank room and adjoining canopy of corrugated PVC over the Station building, and a separate stores roof.
Sponsored
Low maintenance cassette systems for school refurbishment

Low maintenance cassette systems for school refurbishment

Yewdale Corporation Ltd

St Benet Biscop Catholic Academy, in Bedlington, Northumberland, was undertaking a full building refurbishment and required low maintenance blinds that wouldn’t get sucked out of the windows. They installed the YewdaleDefiant® C40T sidewinder blind. This cassette system retains the fabric with studs integrated into the fabric. This holds the fabric into the side channels meaning there is no chance of the blind blowing in the wind. The barrel is enclosed within a headbox which protects the fabric and helps with keeping the blind low maintenance and looking good. Read more about this project.
Sponsored
Waterproofing experts seal leaky basement

Waterproofing experts seal leaky basement

Triton Systems

Waterproofing and damp proofing specialists, Severn Damp & Timber Preservation, installed a range of Triton Systems’ waterproofing materials to deal with water ingress around two skylights, formed within the concrete roof deck over a basement that extended into the garden of a domestic property. 
Sponsored
Pinewood Studios

Pinewood Studios

Dunhams Washroom Systems

An increasing demand for film production facilities required 10 new washrooms across 3 floors. Dunhams worked closely with the contractor to provide a good value solution whilst maintaining quality and premium aesthetics.Classic HPL cubicles, HPL IPS duct panels and HPL vanity units provided the perfect combination of style and value.
Sponsored
ABG blueroof - Rooftop Stormwater Attenuation, St James Quarter, Edinburgh, UK

ABG blueroof - Rooftop Stormwater Attenuation, St James Quarter, Edinburgh, UK

ABG

St James Quarter is an impressive new galleria retail shopping centre and residential development that rejuvenates a large area of the New Town in Edinburgh city centre. The site was formerly occupied by a dated 1960s era shopping precinct, and with the exception of the John Lewis store, all of these old buildings have now been demolished to make way for the new development. The £1 bn project creates 850,000 sq. feet of new retail space, with a capacity for 80 units focussed on high-end retail alongside the Bonnie & Wild’s Scottish Marketplace and Food Hall.Such a large city centre development is subject to strict planning conditions for the management of surface water. The Water Environment Regulations3 (CAR regulations, Scotland) require all surface water from new developments to be attenuated and treated by a Sustainable Drainage System (SuDS) before it is discharged into the water network. The aim of SuDS is to mimic natural drainage, encourage infiltration and attenuate hydraulic impacts to minimise downstream flood risk. Excavating underground storm water storage tanks to control surface water run-off was not possible since three levels of basement parking are incorporated beneath the retail centre. Even where possible, basement tanks are comparatively expensive compared to roof level attenuation systems, with high spoil disposal costs, increased safety risks arising from the excavation activities and a large carbon footprint incurred as a result of the number of additional site vehicle movements.The proposals for drainage and SuDS at the St James Quarter development were mainly focussed on the large 15,000m2 catchment area on roof level 5, with 4,734m2 of 80mm deep attenuation void capacity installed by ABG’s installation division ABG Installs. The blueroof system treats and restricts storm water that deluges onto the roof before it is gradually released over a number of hours via outlet control and filtration chambers to the underground drainage system.The attenuation and restrictor chambers on level 5 (east and west of the soon to open central circular W hotel building) and onto balcony areas 1 and 2 at the front and back of the upper apartment buildings, are supplemented with an additional of 2,280m2 of ABG Roofdrain geocomposite, installed at the base of rooftop planters to provide a connected drainage and irrigation / reservoir layer as part of the landscaping design.ABG calculated and designed the required attenuation capacity, including a new diffuser chamber solution to control water outflow at downpipes.
Sponsored
SIGnature Torch On System - Layfield School

SIGnature Torch On System - Layfield School

AccuRoof

Not long after completion, the Foundation Stage and Children’s Centre building at Layfield Primary School in Yarm started leaking. Water ran down internal walls and damp patches spread across ceilings. Fortunately, the problem has now been solved with the help of SIG Design & Technology, which specified its SIGnature Torch on System to remediate the leaking roofs once and for all.
Sponsored
IKO Armourplan - Reducing costs and risk on school roofing project

IKO Armourplan - Reducing costs and risk on school roofing project

AccuRoof

As competition for schools construction projects remains high and costs are driven down, the need to meet standards of robustness, energy efficiency and acoustic performance become more challenging. At a school for girls, four roofs totalling over 2000m2 required two different finishes, three different build- ups and, crucially, one single Labour and Materials Warrantee to cover all four under our PI Insurance.
Sponsored
Metal roof and cladding coating using Liqausil's BBA Approved Metalseal

Metal roof and cladding coating using Liqausil's BBA Approved Metalseal

Liquasil Ltd

Metalseal 20 was specified to re-brand a small industrial estate in Swindon. Roofs and external cladding were all stripped of existing finishes using vapour blasting. Cut edge corrosion was treated using SWT Primer and all metal surfaces were coated with BBA Approved Metalseal 20 roof & cladding coating. The finish is now graffiti proof, with any graffiti simply washing off with water, with no ghosting residue. The project is covered by the unique Liquasil latent defects insurance guarantee (including cover for professional design).
Sponsored
Award-winning sustainable luxury Finnish lodges with FAKRO z-wave roof windows

Award-winning sustainable luxury Finnish lodges with FAKRO z-wave roof windows

Fakro GB Ltd

About the projectFrisby Lakes Lodge Park is an award-winning East Midlands site with a plan to develop 59 luxurious Finnish Log lodges made from 100% renewable material. Situated in the beautiful Leicestershire countryside with lodges overlooking a large fishing lake, this stunning park has a lot to offer for those wishing to move to an upcoming, safe-haven location for the over 45’s including beautiful electric-operated FAKRO roof windows.These timber-built Finnish Log lodges use materials sourced from managed forests and other controlled sources, which are crucial to sustainability and are FSC® certified. FAKRO roof windows add to the eco credentials as they use FSC-certified pine to make their high-quality pine frames.Which FAKRO products are installed?Installed into the luxury lodges are FAKRO’s FTW-V P2 Z-Wave roof windows with ARF Blackout Z-Wave blinds that are controlled remotely. At the flick of a switch, residents are able to specify the airflow through the room as well as automating the operation of the blinds, giving them the best of both worlds in one window system! Why were FAKRO products chosen?The eco-credentials of FAKRO windows were very important to this build. In terms of environmental impact, FAKRO products are designed to provide the highest standards of thermal efficiency while being manufactured using replenishable natural resources.
Sponsored
Salisbury Walk

Salisbury Walk

Langley Waterproofing Systems Ltd

Salisbury Walk is part of the Girdlestone Estate in London, and the last phase to be upgraded by landlord the London Borough of Islington as part of their commitment to delivering decent homes standards.The TaskWorking to our detailed specification, Opus stripped the existing profiled metal roof and built up our TA-30 Flat Roofing System, installing insulation to achieve 0.18W/m2K as advised by current Building Regulations. Ventilation and rooflight hatches were also upgraded and new upstands fitted.The Outcome“Having achieved such a positive result in the refurbishment elsewhere on the estate by utilising the services of Langley and Opus, it gave peace of mind for all stakeholders to re-apply that formula in other works. It brings us a valued perspective, enabling us to make informed decisions going forward about the condition of the estate, knowing we have consistency in approach, design, materials and application. We also have the peace of mind, going forward, that the roofs are all upgraded to a high standard and are assured for decades to come.”Theo Petrou, Mears Group Project Manager
Sponsored
Co-operative, Avonmouth

Co-operative, Avonmouth

Berry Systems

Berry Systems supplied and installed Internal and external safety barriers to protect doorways, walkways, columns, racking, site and equipment at the Co-operative, Avonmouth project.The 435,780 square foot (40,485 sq m) state-of-the-art facility is conveniently located near to Junction 18 of the M5 and ideally placed to distribute goods to 482 Co-Operative stores in the Bristol, North Somerset and South Wales area. Our safety barriers have been installed extensively both inside and outside the distribution centre. The access roads are lined with Barrier Rails mounted on semi-flexible Flexi-Posts. In the vehicle waiting areas power cables have been integrated into the barrier with post extensions mounted to every other post, for the power outlets. The Flexi-Posts give greater protection if a reversing vehicle fails to stop in time, avoiding damage to the barrier, power cables and HGVs. We also installed a number of exterior bollards to protect doorways and other access points and additional barriers to protect fuel storage and other plant. Inside the distribution centre, structural columns benefit from our column protection units that flex upon impact to minimise damage. Other areas have our unique double rail system mounted on spring steel buffers to create an impenetrable but flexible  barrier from ground level to a height of 610mm.
Sponsored
The Lanesborough Hotel - London

The Lanesborough Hotel - London

Fixfast Ltd

The Lanesborough 5-star hotel on Hyde Park Corner, Knightsbridge in central London; is operated by the Oetker Collection, and is reputedly the most expensive hotel in the city.All the rainwater outlets on the roof were in need of replacement, and Holborn Asphalt needed a simple, effective solution that would be compatible with the waterproofing membrane that they were installing.An extensive number of our FarBo rainwater outlets were selected for this project - these outlets are perfect for this type of work as they fit neatly into any existing drains and downpipes.
Sponsored
Canberra House

Canberra House

Bauder Ltd

Canberra HouseBauder Cold Applied LiquiTOP SystemSynopsisCanberra House is an office facility in Swindon. The existing single ply PVC waterproofing system roof was leaking and so Bauder carried out a full site survey. The resultant report gave the client several options to rectify the leaking roof.Bauder Building BoardProject nameCanberra HouseLocationSwindonProject typeRefurbishmentRoof size985m²SpecifierRapleys LLP (Bristol)Approved contractorCentral Roofing & Building Services LimitedThe specificationThe LiquiTOP system was chosen as it can be applied directly to the prepared and primed existing single ply covering. The liquid system allowed us to get into tight spaces and without the need for any hot works.LiquiTOP is excellent on refurbishment projects where the complexity of the roof involves intricate areas to be detailed that are not easily achieved with a sheet membrane, or the actual working space on the roof is constricted.Project challengesLarge areas of plant and machinery were situated just above the roof level making access to the areas below difficult with the plant in-situ. The available budget on this project did not allow for lifting or removing the plant, stripping the existing waterproofing system, and replacing with new. Therefore, the decision was made to overlay the existing single ply membrane with a cold applied liquid waterproofing which can be installed without the need to raise any plant.To overcome drainage challenges, secondary upstands were created under the plant and fabricated channels placed underneath allowing water to flow through to the drainage points.The resultBauder was able to offer a cost-effective solution without the necessity to remove or decommission the roof mounted plant and machinery. Cost reductions were achieved for the client by overlaying the existing roof, negating any need to strip existing materials, and not having to remove or raise the plant.The works were carried out by Central Roofing who manged the project impeccably and also finished ahead of schedule.System installedBauder Cold Applied LiquiTOP System1 LiquiTOP PU cold applied liquidA moisture triggered curing polyurethane waterproofing resin; applied in 2 coats, reinforced with Bauder LiquiTOP Glass Fibre Mat.
Sponsored
Sky News Studios - F. Ball provides Sky with good news

Sky News Studios - F. Ball provides Sky with good news

Ball, F and Co Ltd

High performance subfloor preparation products and adhesive from F. Ball have been used to create a high quality floor finish at Sky News studios. To provide a firm, smooth base over which the floorcovering could be installed, Stopgap 700 Superflex flexible levelling compound was installed over the plywood subfloor, having first being primed using Stopgap P131 general purpose primer. Once the levelling compound cured, wood-effect LVTs and Norament rubber sheet floorcoverings were installed across the room occupied by cameras and production crew. Styccobond F58 acrylic emulsion adhesive, was used to ensure the rubber sheets would remain firmly in place.
Sponsored
Coordinated furniture for local authority roof terrace

Coordinated furniture for local authority roof terrace

Furnitubes International Ltd

New development Colindale offices is recently home to London Borough of Barnet staff and community facilities. Furnitubes has supplied 6 table and bench sets and a further 7 independent benches from the RailRoad Inline range, with ‘Delta’ supports that can be readily bolted down to the decking of the new roof terrace located on the 4th floor. Eleven RailRoad planters have been placed in the gravel margins to perfectly compliment the nearby seating, and planted with contemporary box topiary balls.
Sponsored
Sliding-Over Fixed Rooflight Maximises Light In Mansard Roof Extension

Sliding-Over Fixed Rooflight Maximises Light In Mansard Roof Extension

Glazing Vision Ltd

After a particularly contentious and protracted planning process, this semi-detached, red-bricked house, part of a group of five properties that form Regent’s Mews in affluent London NW8, finally boasts an impressive third storey extension as a result of the erection of a mansard roof.The new dormer windows to its front aspect lend this 1980’s property a delightfully modern aesthetic, whilst the provision of a green roof to the rear aspect underlines its eco-credentials. The installation of Glazing Vision’s elegant sliding-over fixed rooflight above the stairwell, together with 4 additional fixed rooflights, has maximised the light streaming into this new living space, and also provided an all-important source of ventilation.Initial proposals to convert this house from two to three floors were rejected way back in 2001 by the local Planning Department on the grounds of it being “visually intrusive, overbearing massing not part of the existing architectural language and overlooking neighbours”. These same considerations faced Robinson Leigh Architects, whose track record of successful planning application had led to their appointment in 2013 by a client keen to find a solution to the planning impasse.There were a number of challenges for the architects, as they sought to design a scheme that would prove more successful through planning. The house is situated in St John’s Wood Conservation area, where restrictions on the character and appearance of all buildings are strictly applied. Normally any roof extension in this area would not be permitted and the house, indeed the entire mews, had been identified as an “unlisted building of merit”. Consequently the planners insisted that all new work to the house “must match existing original work in terms of choice of materials, method of construction and finished appearance in order to maintain the cohesion of the mews.The variety of roof forms in the mews, however, presented an opportunity for the architects to put forward their proposal of a flat-topped mansard roof as “a modern interpretation of the surrounding architectural precedent” said Leigh. Critically, the new mansard roof would also not add height above the general roof level of the neighbouring properties in Regent’s Mews, and thus would not be visually intrusive. The design of the three new dormer windows at the front of the house did depart from that of the dormer windows on the other mews houses though – they were square in contrast to the prevalent curved headed windows. However, given that they were really only visible from within the actual mews, the planners considered this alteration in form to be acceptable. Furthermore, the recessed glazing of the dormer windows ensured that the privacy of the occupants using the living spaces would not be compromised.The choice of materials also had to conform to the surrounding properties: the dormer windows were lead-clad, and the roof was tiled in Welsh slate, which softens its appearance and reduces the “apparent bulk of the structure.Another complication for Robinson Leigh related to the impact upon the large villas of Langford Place to the rear of the property. Vehement objections from these residents, who were concerned that the roof extension would shatter the illusion that they are set in extensive grounds led the architects to revise their proposal: the pitch of the northwest slope of the mansard roof was adjusted to a 70 degree angle in order to reduce its prominence in the views from these villas, particularly from 5 Langford Place. A second flat roof, which adjoined the house was removed, and Robinson Leigh extended the mansard roof to the parapet. This then gave the client more internal space, eliminated any overlooking issues, and created a more homogenous and symmetrical design.The architects cleverly designed both the main roof level of the mansard to be landscaped with indigenous flora in order to respect the planners’ preference for ecological biodiversity in the area as well as to attenuate water run-off.In conjunction with these structural requirements imposed on Robinson Leigh’s design of the mansard roof, unlocking natural daylight in the “dark zones” in the interior of the new storey was a key priority. Mindful of the rejection of the glazed roof proposal from 2001, which the planners had deemed to be too intrusive on the neighbours and at odds with the surrounding architecture, the architects sought to reduce the amount glazed by 50%, whilst simultaneously addressing the problem of reduced levels of natural daylight resulting from the recessed dormer windows.Robinson Leigh’s solution was to propose a more sympathetic glazing arrangement to the flat-top of the mansard roof, comprising four large fixed rooflights and a sliding over fixed rooflight from Glazing Vision, that would achieve the high specification they desired. These rooflights, pointed upwards to the sky, would maximise the amount of daylight entering the extension and bouncing off the hardwood timber, which had been used extensively, as Leigh points out, to “draw together several disparate elements of the interior design, such as the sliding walls, pocket doors and floor-to-ceiling shelving and cupboards”.Glazing Vision’s sliding over fixed rooflight was to inhabit the space immediately above the stairwell, which had also been lined in timber to subtly link the top floor with the ground floor and to help draw the eye upwards. Timber frames had also been used on the windows. As with the other four rooflights, Glazing Vision’s sliding over fixed rooflight needed to be made to a bespoke size – the architects required it to be the exact size of the stairwell, or indeed over-sized, so that the frames were not visible from below. Precision-engineered at the Glazing Vision factory in Norfolk, the special sliding over fixed rooflight was supplied in two sections, with an overall span of 2400mm and a width of 2240mm. The minimalist internal framework, finished in pure white rather than the standard grey, ensured that there were unfettered, sky-only views from the inside, thereby enhancing the impression of space and loft. Through the clear glazing of the Glazing Vision rooflight natural daylight absolutely flooded the stairwell, permeating also down to the lower floors.Given the stringent planning controls on the appearance of the mansard roof and the concerns of the vociferous neighbours, Glazing Vision’s sliding over fixed rooflight offered another invaluable benefit to Robinson Leigh. The footprint of the unit on the roof remained fixed, both open and close. This meant that there was no bulky additional furniture required, whilst the minimalist exterior framework was finished in slate grey to blend harmoniously with the Welsh slate roof tiles.No less important was the need for natural ventilation in the mansard roof extension. The architects were keen to create a venturi effect in the central core of the house and stairwell by channeling the airflow through the opening of the rooflight. The Glazing Vision rooflight, specified by Robinson Leigh to slide side-to-side rather than up and down, is electronically controlled at the touch of a button from inside the house, retracting the sliding section over the fixed section of glazing. Once the sliding section is fully retracted, there is a 50% clear opening in the rooflight, out towards the sky, thus providing superior air quality within the top floor, as well as intensifying the amount of natural daylight. An essential security feature of the Glazing Vision sliding-over fixed rooflight is that it is supplied with a manual override as standard.The design, approval and erection of the mansard roof extension took three years but Robinson Leigh have succeeded in updating a tired-looking 1980’s mews house with a new, sophisticated, modern exterior, that quietly complements the surrounding properties. The new third storey has exceeded the client’s needs for additional living space, and the clever use of rooflights has ensured the interior is light, bright and inviting.
Sponsored
M-Tray® Instant Green Roof - The May Fair Hotel

M-Tray® Instant Green Roof - The May Fair Hotel

Wallbarn Ltd

Mayfair, London Our modular green roof solution, the M-Tray®, has transformed what was previously a fairly unsightly bitumen rooftop at a Mayfair hotel into a beautiful green space for guests to enjoy. Conversion of the 13sqm space was awarded to Wallbarn after we successfully completed the hotel group’s first green roof project at the Radisson Heathrow. Being so easy to transport our M-Trays®were selected as the fastest and most efficient way of converting the unused space into a lush, green and aesthetically-pleasing space. The installation only took half a day with minimal disturbance to guests.
Sponsored
Waterproofing Historic Leaking Vaults

Waterproofing Historic Leaking Vaults

Newton Waterproofing Systems

As part of their ongoing relationship with Imperial College London, Newton Specialist Contractor A.P. Gooch assessed and waterproofed 11 Victorian brick vaults beneath the streets of Kensington, London, after the existing competitor ‘waterproof render’ failed.Imperial College London is a world top ten university, and it's top-class educational facilities in Central London are constantly used by multidisciplinary students, including doctors, and nurses, for their studies. It was therefore crucial for AP. Gooch to perform the work whilst also creating minimum disruption to the college students.Following a full assessment of the vaults, A.P. Gooch decided that the best option was to install the tried and tested ‘failsafe’ Newton System 500 cavity drainage membrane solution in order to depressurise, capture and safely manage ingressing water away from the building. A.P. Gooch also committed to carrying out the entire installation at night in order to cause as little disruption as possible to the College’s students.By installing Newton 508 membrane with strategically placed Newton MultiPlug fixings, the system remained sympathetic to the historic structure beneath. Newton Basedrain was also installed in order to channel captured water to one of four Newton Titan-2 sump chambers, the compact size of which made them ideal for use in a structure with such tight size restrictions. Each chamber also contained primary and backup Newton CP400 pumps to ensure that there will always be a safe means of removing captured water from the building.Now fully protected by a maintainable system, compliant with waterproofing code of practice BS 8102:2009, all 11 vaults are now completely dry, providing safe and healthy individual study rooms for the medical students at Imperial College.

Showing 361-396 of 1998

Feedback