"barrier queue management systems"

The design concept of this project focuses on the demolition of an existing building and replacing it with a new build mixed use development of 6 storeys (plus basement) 9 self-contained units on floors 1-5 and 377sq m of commercial space on the basement and ground floors. During the Phase 1 Primary Risk Assessment, borehole and trial pits revealed Dibenzo (a,h)anthracene, CO², TPH and Asbestos contamination. The proposed remedial strategy to be adopted at the site was one of managing the pathway between the source of contamination and the critical receptors on-site.

Two 20 storey buildings, one a hotel and the other a luxury residential and commercial apartment block, have been constructed near Wembley Stadium. Triton Systems was appointed by the main contractor, Donban Construction, to supply a watertight concrete system for the large underground car park which will serve both buildings.

Royal Winchester HouseComer Homes is renowned for the high quality of its residential and commercial developments, which span London, Hertfordshire, Dorset and throughout the South East. Its latest project is Royal Winchester House, a landmark building of one and two bedroom apartments at the heart of Bracknell's new town centre. As a planning requirement of Bracknell Forest Council, Comer Homes was required to provide a sustainable, low energy form of heating that would offer a reduced carbon footprint, as well as being affordable to run.The SolutionComer Homes specified F730 Exhaust Air Heat Pump systems from NIBE for all 337 apartments on the development to ensure they could meet their renewable targets. The new homes builder employed MKP Consultants Limited to undertake the building services design as they had previous experience of NIBE systems on other apartment developments in the area.The NIBE F730 Exhaust Air Heat Pump system was an ideal solution, as it offers mechanical extract ventilation, alongside heating and hot water in a compact design. The heat pump units were installed in a service cupboard in each apartment, as they have a small footprint of only 0.6m2.NIBE F730 operates by recovering energy from the ventilation air and, if desired, extracted from outdoor air, the heat energy is absorbed by the heat pump using a vapour compression process and subsequently transferred to the water-borne heating system, in this case an underfloor heating system. The integrated 180L domestic hot water cylinder also ensures a plentiful supply for the one- and two-bedroom properties.A sustainable solution, NIBE F730 keeps energy consumption to a minimum. The efficient control system automatically adjusts the indoor climate for maximum comfort for the occupant, using a combination of weather compensated control and the low energy inverter driven compressor.Each apartment is also fitted with a NIBE RMU 40 room controller, to allow greater flexibility of control for users and if required can be easily connected to NIBE’s internet remotely monitoring and control platform UPLINK™.Thanks to this innovative heat pump system, residents at Royal Winchester House are set to benefit from lower energy bills and a reduced carbon footprint.The ResultsThe NIBE F730 system complies with Parts L, F and G of the building regulations, and helps to meet planning requirements designed to reduce energy consumption and carbon footprints within residential housing developments. External noise is kept to a minimum and building aesthetics are unaffected by the need for external plant.TestimonialHead of Projects at Comer Homes, Jack O’Brien explains: “We were looking for a heating and ventilation system that would be both sustainable and affordable to run. We have been impressed with the performance of NIBE’s heat pumps, with their high efficiency, low noise and low running costs further enhancing the sustainability of the whole development.”About Royal Winchester HouseRoyal Winchester House is a landmark building of high specification 1 and 2 bedroom apartments available to rent. The unique design and architecture of Royal Winchester House creates a striking and impressive presence from the ground floor retail spaces up to the luxury penthouse levels.Royal Winchester House has been built for the private rental market and the development is being managed by Chancellors estate agency. The apartments benefit from high standards of insulation and air tightness. In addition to the NIBE heat pumps, the whole development has been fitted with a biodigester for the repurposing of food waste, as part of reducing waste sent to landfill and to add to its sustainability.

A new ferry terminal on Brodick Bay, created as a tourism and community gateway to the Scottish Isle of Arran, has been fitted from stem to stern with door and window systems supplied by GEZE.Maritime design and modern comfortThe ship-shaped terminal, designed by the renowned architectural firm Norr of Glasgow, is part of a £30 million investment which aims to update the harbour, get it ready for 21st century travel, and improve passenger comfort.Natural ventilation thanks to automated windowsThe generously sized lounge with its double height and large wall of windows on the western façade offers visitors a breathtaking view of Brodick Bay. The large windows, which are automatically opened and closed by 30 GEZE Slimchain chain drives, give the reception area at the main entrance to the building a bright and spacious feel. The uniquely slim and understated look of the Slimchain window drives integrates perfectly into the unique façade design of the Brodick ferry terminal.The Slimchain window drives were installed not only on the large windows in the lounge, but rather throughout the entire two-storey building – with the exception of the upper ventilation openings: Powerchain chain drives are used there. These especially powerful window drives were chosen to operate the larger windows, since they allow for large opening widths – which is important for quickly venting smoke in case of a fire.The window drives are connected to a GEZE MBZ 300 SHEV control panel for smoke and heat extraction drives, which is integrated into the building management system of the terminal. This makes it possible to easily control and monitor the complex natural ventilation system.Ventilation, smoke and heat extraction, and emergency exit protectionThe windows in the staircases are also equipped with Slimchain chain drives. If needed, the window systems also allow for natural smoke and heat extraction: In case of smoke and heat, the smoke extraction solutions open the windows and control fresh air openings, so that lifesaving escape routes remain smoke-free and safe to use in case of an emergency. In addition, GEZE OL Line manual fanlight openers provide supplementary natural ventilation.Door systems for accessible fire protection doorsBeneath the glazed western elevation are two automatic swing doors to either side. These are powered by GEZE Slimdrive EMD-F door systems, just like another door on the side façade of the building. The electro-mechanical swing door drives for single leaf fire and smoke protection doors are extremely versatile: They provide power assisted opening and can be initiated using the operating button with constant opening and closing speed. Integrated obstacle detection also identifies potential obstacles and stops the opening or closing process if needed. By doing so, Slimdrive EMD-F drives also ensure easy and safe access for people with mobility issues.Understated design and high access convenienceFrom the main entrance, a glazed corridor leads to a bi-parting sliding door powered by a GEZE Slimdrive SL NTsliding door system, which leads into the foyer of the main reception area. The Slimdrive door drive fulfils two key stipulations here at once: It is suitable for interior and exterior doors with high levels of footfall, and ideally suited for glass façades with high design standards – such as the Brodick ferry terminal – due to its low operator height of just 7 cm.

University of West LondonLocated in the heart of England’s Capital, the University of West London (UWL) is committed to playing a leading role in tackling the global climate crisis by becoming net zero carbon by 2030. The University reported a 60% reduction in carbon emissions in 2021 compared to 2005. However, with a long way still to go before it is able to operate at net zero, UWL welcomed a £5 million award from the Government’s Public Sector Decarbonisation Scheme (PSDS) in 2021. With aspirations to retrofit its main sites in Ealing and Brentford, the funding unlocked a major opportunity to improve air quality around the borough whilst taking a big step towards meeting its net zero pledge by 2030.The SolutionUWL contracted Ameresco as principal contractor and designer, who partnered with NIBE Energy Systems and JKN Renewables, Ltd. The first and main challenge was to design a ground source heat pump (GSHP) system for the university without disrupting the main car park on the campus to reduce the impact on students. This, in turn, resulted in an innovative solution, combining a ground source heat pump system working with boreholes and solar PVT panels. The designed system not only supplies 222 kW of PV electricity generation but, crucially, acts as a collector system for the GSHP, capturing naturally occurring energy in the air to drive the heat pump process, and therefore reducing the number of boreholes required. The old gas boilers previously heating the campus were replaced with 584 solar PVT panels in combination with 34 169-meter boreholes to provide 900 kW of heating and hot water throughout the site. Further reducing disruption across the campus, JKN Renewables carried out an off-site build, with the pre-built PVT and plant room modules being delivered on time despite constraints caused by the COVID-19 pandemic. The heat pumps and solar PVT were supplied by NIBE Energy Systems, and JKN Renewables undertook the design, installation and commissioning of the system.The ResultsThis transformation really highlights the benefits of combining multiple technologies to deliver efficient, low-carbon solutions. Whilst the full capacity could have been delivered using boreholes, which would have been a less costly option, the University welcomed the installation of PVT as an innovative and space-saving option.The major project will save an estimated 500 tonnes of carbon each year, and 9,460 tonnes across the equipment’s lifetime. It will also save 3,116,738 kWh of gas-derived energy per year (equivalent to 70 heated homes) whilst improving local air quality.The project is thought to be one of the world’s largest PVT projects, and positions UWL as a leader in higher education for addressing the climate crisis. The project was recognised by the Energy Managers Association’s (EMA) Energy Management Awards, receiving the Highly Commended designation in the Decarbonisation Project Category.Testimonial“We have invested more than £150 million in our campus recently to create an inspiring social and learning environment for our students. But we know all this great work will be for nothing, unless we do our bit to tackle climate change. We have been taking a leading role in our community to tackle the global climate crisis… Recently, the university declared a climate emergency and pledged to become a zero net carbon institution by 2030. A big step to meeting this pledge, has been our decarbonisation program, that has seen the university harness the latest renewable technology to create our own energy and introduced energy saving measures across the campus. Backed by more than £5 million of Government funding, the project is the largest of its kind in the higher education sector, and really underlines our ambition to be one of the most sustainable universities in the UK.”Anthony WoodmanProfessor, deputy vice chancellor and provost for health of the University of West LondonAbout the installerJKN Renewables are specialists in low energy heating, cooling and hot water systems. They provide design, consultancy and installation services to both domestic and commercial sectors, with a range of experience in the renewable heating sector. They pride themselves on providing expert advice and quality installations of ground and air source heat pumps, underfloor heating and solar thermal.

For the new Calderwood primary school, part of the Calderwood Master-plan development in West Lothian, JM architects was tasked with creating an open and collaborative space for teachers and students to enjoy for years to come. Thanks to Forbo Flooring Systems' large portfolio of solutions, JM architects specifies a variety of products throughout the school, with Marmoleum and vinyl at the forefront of this new development. The project went on to be the winner of the Forbo Escapes 2021/2022 competition.

Stagecoach West operates and maintains 65 buses serving over 5.5 million passengers annually within the Swindon area alone.So back in 2016; Stagecoach West relocated to a brand new £3.2million development, in order to expand their services and base depot. CLD Fencing Systems and Pembury Fencing worked together to design a fencing system that would match the requirements of Stagecoach West and their new bus depot.The BriefAs Stagecoach were relocating to a brand new development, the brief was driven by their need for bus depot fencing.Must offer a level of security for their property they previously didn’t have.Anti-climb properties.Aesthetically pleasing fence line that was modern and stylish.

The roof on Bede Primary School and Community Centre in Gateshead was in great need of repair. Installing roofing contractors Hodgson and Allon liaised with IKO to refine the specification to meet the client’s requirements. This included a full strip and re-cover with a flame free system to carry a 20 year guarantee. IKO chose an IKO Mach One single layer bituminous system incorporating a site specific cut-to-fall system. This project was a complex roof replacement system with multi-trades required for specialist operations.

Laying ceramic tiles on flat roofs, terraces and podium decks has been made easier with the development of the Rail System, an integrated substructure system to increase stability of suspended tiles. The Rail System incorporates an adjustable height pedestal with a special clip head fitting, a specially profiled aluminium rail which clicks onto the headpiece without the need for mechanical fixings and a top headpiece which slides along the rail to hold and position the tile. By tying the pedestals together via the rail, there is far less risk of an individual pedestal moving or changing height, leading to far less risk of a tile rocking over time. This assures the integrity of the upper surface and gives a health and safety improvement to the area.The rail gives added structural stability as the weight is distributed laterally along the rails and not driven directly downwards onto the pedestal beneath. The top headpiece can be slid along the rail to fit to the corners of the tile above. This means the edge of the tile does not necessarily have to be directly above the pedestal, giving much greater flexibility for positioning.Consider the possibility of a drainage outlet or other awkward detail being directly beneath the edge of a surface tile. Instead of having to cut the tile back, simply move the pedestals away for the outlet and let the rail circumvent the hazard. Position the top head in the correct place to fit around the corner of the tile and the issue is addressed quickly, securely and easily. The rail system brings greater lateral stability to the tiled deck and is a faster, more efficient way to lay porcelain tiles and slabs. It is a major technical improvement to suspended tile and slab installations.

Providing the solution for EWI retrofit on non-traditional build housingHaving successfully completing the previous 2 phases, K Systems were approached to provide a specification for EWI installation onto two non-traditional build housing types: 5M and Caspon. Both archetypes are of timber frame construction with single skin brick infills at ground level and a mixture of hanging tiles or cladding on upper floors. Typical of non-traditional build housing, the technical team at K Systems had to pay particular attention to bespoke detailing to derive a suitable EWI solution to meet the client’s requirements.The hanging tiles and cladding were removed from the upper floor(s) and replaced with timber sheathing boards to allow for a uniform aesthetic and a striking contemporary finish.Delivering a robust, safe and aesthetic system solution to meet the project requirementsHull City Council wanted to improve the thermal efficiency of their housing stock whilst provide a durable and more contemporary aesthetic look for the project. A combination of K Systems M Silicone and K Systems M VBriQ was used to achieve a u-value of 0.28 using varying thicknesses of A1 non-combustible mineral wool (80mm to 150mm) to adapt to the variety of substrates typical of non-traditional build housing. The combination of acrylic brick slips and polymer enhanced silicone topcoats achieved an appearance that is durable and elevated the dated look of the estate to a more modern feel. Our team worked extensively with the appointed architect preparing bespoke detailed drawings for the various archetypes, particularly transitions between the brick and timber substrates, cills, verges, rooflines, gas boxes and below DPC. Weekly demand planning meetings ensured timely delivery of materials to the appointed contractor.We ensured the correct fixings were specifiedK Systems commissioned pull-out tests to determine the optimum fixings and washers to be used to anchor the EWI system to the different substrates. A combination of hammer fixings and screw fixings were specified.

Triton Systems approved contractor, British Damp Proofing, installed products supplied by Triton Systems to waterproof two lift shafts in a development of 25 dwellings. Triton Bentonite Membrane was used to waterproof the lift slab base and kicker, which were poured using concrete made waterproof with Triton TT Admix. Triton's Adcor waterbar was then installed on to the kicker.

Set on the former site of a pub and a fish and chip shop, the stunning new Clifftown Shore residential development has breathed new life into the Western Esplanade in Southend-on-Sea in Essex. The development boasts a stunning location close to both the seafront and the nearby Conservation Area, which encompasses some of the coastal city’s most celebrated local architecture including the 1912 built Cliff Lift funicular railway. In addition to the 51 luxury one, two and three bedroomed apartments, the development also features a ground floor restaurant and cocktail bar and a host of aluminium fenestration systems.Taking inspiration from the Art Deco style of the neighbouring buildings and the beauty of the natural landscape, the undulating ‘waves’ of the white concrete framed building have been further accentuated by the curved installation and slim sightlines of Senior’s thermally-efficient SF52 aluminium curtain wall system.The stunning views from the individual apartments have been framed using Senior’s patented PURe® tilt and turn aluminium windows, with PURe® SLIDE aluminium doors providing access to the outdoor terraces. The thermal efficiency achieved by Senior’s PURe® aluminium system has been further enhanced with the use of energy-efficient triple glazing.The main entrance to the development features Senior’s aluminium PURe® Commercial Doors to provide safe and secure access. As well as contributing to a more energy-efficient building envelope, with all of Senior’s aluminium windows and doors comfortably meeting the new lower U-value targets of Part L of the Building Regulations, the use of the PURe® system also offers improved acoustic performance.Owing to the coastal location of the development, Senior’s aluminium fenestration systems were powder-coated in marine grade Matt Black to offer additional protection from the elements and provide an attractive contrast with the white building design. The installation of aluminium brise soleil, also powder-coated to match the aluminium windows, is both an attractive and practical feature, and will provide solar shading and protection against solar gain.Designed by LAP Architects and built by Cura Construction, all of Senior’s aluminium fenestration solutions were fabricated and installed by supply chain partner Glass & General.

Nuway Tuftiguard Classic has recently been installed within a modern office building in Dublin, by the expert installers from Andrew Scollan Matting Systems.Cut into a unique shaped matwell, the classic grey and aluminium aesthetic of Nuway Tuftiguard Classic was chosen to complete the first impression for visitors entering the building, whilst also providing outstanding dirt and moisture retention. As a result, this will reduce the number of accidental slips or falls and protect interior floor finishes.

Marrying the old with the new is an age old problem for the self-builder, but at a project in Leicestershire contractor Pearson Properties was able to seamlessly combine history and cutting edge environmental benefits using products from Schlüter-Systems.

This Aluminium 'Simplicity' Corrugated Wall Pannelling System has been installed into an Office Reception Area.Finished in both Natural Anodised and white Powder Coating, these interlocking profiles have created a modern, sleek feature.

An array of Forbo Flooring Systems products has been installed within the University of St Andrews’ newest student accommodation building, to help deliver a contemporary and high-end aesthetic that would enhance the students’ experience.

In preparation for the 2012 Olympics, where over 10,000 athletes from more than 200 countries competed in London, Zaun developed a walkway system that would enable technicians to work safely at height to install fencing as well as attach CCTV and security enhancements to the highest parts of the fencing.Project ChallengesThe project required a range of unique and innovative solutions because of the varied challenges that were in play. The system needed to adhere to strict health and safety regulations, especially as working at heights has many potential dangers, and worker safety is a huge priority. We needed to create a cost-effective solution that installers could use in various venues and areas.We also needed to ensure that this walkway system did not damage the 358 mesh. The walkway also needed to facilitate the repair and installation of Perimeter Intrusion Detection (PID) and pulse-monitored electric fencing systems and razor wire. As such, it was essential that installers could easily and safely access materials, equipment and tools.Biggest Sporting Event In The WorldAs the Olympics is one of the biggest events in the world, global attention was on London and the various venues needed to be as secure as possible. From camera operators and athletes to volunteers and security personnel, the huge number of people involved in the Olympics meant that the security team needed to be able to see as much as possible at all times. To do this, it was best to put the security monitoring equipment along the fence line to survey the whole area and reduce the requirement for additional civils for CCTV cameras. Security measures during big events like the Olympics need to be incredibly stringent. The installation of these surveillance and security measures is of utmost importance to the security of the entire event.Innovative Walkway SystemZaun designed and manufactured a unique walkway system that allowed installers to work at heights safely without damaging the mesh fencing. Our innovative system was designed specifically to support the installation and maintenance of 358 security mesh fencing, CCTV cameras and electric fencing at the top of the fence line. We created an innovative walkway solution that easily attached to 358 mesh so technicians could check and access the security measures whilst safely working at height.

Fully compatible products from the range of TBA FIREFLY™ have been chosen to compartmentalise roof voids between apartments and communal lobbies of a large apartment building in the London Borough of Lewisham, providing 120 minutes fire integrity protection as part of a wide ranging refurbishment programme carried out earlier this year.The contract on Lewisham Homes’ Commodore Court in Albyn Road has been led by the sector specialist construction company, Mulalley & Co. with London/Sevenoaks based CLM Fireproofing carrying out the installation of the TITAN Lite™ 120:60 barrier system, in combination with Collaroll and the use of ancillary products from the FIREFLY™ range.CLM Fireproofing was founded 30 years ago by Clive Miles and has established a reputation as a leader in the fields of both passive fire protection and fire-stopping; working in a variety of sectors on projects right across the UK. A regular user of the FIREFLY™ range, many of its operatives have attended courses at the company’s premises in Rochdale to become trained FIREFLY™ installers.The Site Agent for CLM, Virginijus Pasvenskas, commented: “There was initially an intention to use a mineral wool flexible fire barrier, but the product was not tested for the scenario installed around the services such as a downpipe and it was upgraded to the use of the FIREFLY™ system by the client/project team. The installation of the TITAN Lite™ and the Collaroll to wrap the trusses and the services went very well and, as well as supplying specific details for the work, FIREFLY's technical team came to site to inspect the works. We completed our contract on schedule back in the summer.”TITAN Lite™ 120:60 has been developed for use in vertical separation or compartmentation situations, offering 120 minutes integrity and 60 minutes insulation and is able to be sealed around penetrations. It is widely specified to form fire barriers within roof voids and floor voids in many different property types, including tower blocks and other HMOs.The flexible woven material is easy to cut and fix, and is chemically treated to improve its cooling properties and therefore prevent temperatures rising in adjoining areas. The system has been fully tested to BS 476 Parts 20 & 22 and is third party certified by IFC. The six metre long rolls of TITAN Lite™ 120:60 have a minimum thickness of 6mm and are installed using special staples as well as high temperature adhesive.Employed as part of the FIREFLY™ System and also to wrap the services which penetrate barriers such as PHOENIX, ZEUS Lite™ and APOLLO Lite™, Collaroll comes in a roll which unwraps to 10m long x 300mm wide with a sewn in concertinaed skirt. The skirt can be moulded to shape to seal it neatly to the upright barrier, which is usually at 90 degrees to the Collaroll and fixed into place using the FIREFLY™ high temperature adhesive. The R31 Staple Gun and Staples are used to staple the Collaroll to itself tightly around the penetration.

Maritime outfitter giants – Scandia have expanded their worldwide footprint into Singapore. Genesis ASL15 is the perfect accompaniment to this project with its’ energy efficient solution to illuminate steps. Should a local or emergency power failure occur on stairways, increasing the risk of hazard for evacuees, the Aluminator® system allows the evacuee to orientate, locate stair edges and risers, and to assist in the safe evacuation of the premises. This is a great example of when great things happen- the job was quoted on the Thursday, shipped Friday and installed on the Tuesday!

Ogura Ward is one of 6 wards that makes up Chapters House, the mental health facility in Goodmayes Hospital, Ilford. Bushboard supplied high risk healthcare units – healthcare boxed out units with a rigid aluminium frame and panel system – specifically designed for safe ensuites and communal wet rooms in a high security environment. Anti-ligature sanitaryware, crafted from high impact resistant, anti-shatter moulded resin, was pre-plumbed to the units ensuring the safest possible environment.

Newtons help defeat damp in this remarkable building using Newton System 800. Due to the age of the castle, there were significant rising and penetrating damp problems, for which Newton damp proof membranes were the ideal solution.

The £82 million redevelopment of Coventry’s rail station has seen the creation of a new entrance building and multi-storey car park, with Senior Architectural Systems playing a key role in its creation.Designed by AHR Architects, the West Midlands station is one of the busiest outside of London. The project is the latest to have been delivered by Senior and its long-term supply chain partners Elite Aluminium Systems and Buckingham Group Contracting Ltd.Senior’s slimline SF52 aluminium curtain wall system was specified for the main station building, helping to flood the concourse with natural light. Senior’s robust SD automatic commercial sliding doors were also installed to provide secure, safe and accessible access to the thousands of passengers who use the station every day. Additionally, the new-look station also features a footbridge to allow easier access to the platforms and bus interchange.Senior’s slim profile SF52 aluminium curtain wall system provided the ideal balance of aesthetics and performance by allowing copious amounts of light to enter the building and offering enhanced thermal efficiency. The aluminium frames were powder coated to boost durability and also complement the station’s feature grey and red cladding. Senior’s SPW501 aluminium commercial swing doors were also specified throughout to provide a safe and secure solution to such a high traffic environment.The extensive use of glazing on the building also pays homage to the original station building which is located nearby but owing to its Grade II status, could not be extended or developed to meet the increased demand on Coventry’s rail network. Ahead of the wider refurbishment of the original building, the large glazed panels have been used to frame various artwork from local artists and create another focal point for visitors to the city.

Aurora is a first-class, highly sustainable office building in the heart of the city of Bristol and one of the greenest offices outside London and among only six in the UK to achieve a special BREEAM 2014 Outstanding Environmental Award for its sustainability credentials. Aurora, which provides 95,000 square foot of Grade A office space on the Floating Harbour, also achieved LEED ‘Gold Standard’ and is currently the only building in Bristol to exceed BCO design guide criteria.The aim of the design was to provide a space that is efficient, offers maximum natural daylight and promotes health, wellbeing and productivity amongst users. To achieve this inspiring working environment Lusso provided and installed the glazed partitions to create a stunning glass atrium within the 7-storey building. This was a challenging design which involved close collaboration between Lusso, Bush Consultancy, and Willmott Dixon to create a system where the framework floated off the slab edge. The structural complexity of this atria required a bespoke solution, which involved close collaboration with the architects from conception.The Lusso 25M single glazed framed system was used within the interior of the building which allows the maximum amount of daylight possible uniformly spread throughout the interior making Aurora, arguably, one of the best office space Bristol currently has to offer.

The Project A new Leisure Centre at Dudley is part of a multi-million-pound Leisure Centre program and regeneration of the area. The new facility will include a 25metre swimming pool, teaching pool, four-court sports hall, gym, exercise studios, soft play area, and caféDudley Council has committed £17.4 million to the project in the heart of the town centre. Working in partnership with Alliance Leisure, through the UK Leisure Framework, the council will create a vibrant modern hub for residents and workers to enjoy a range of physical activities.The ChallengePropose a system suitable for a wet, high humidity environment including Cubicles, Ducts, Vanities, Lockers & Benches. Ensure the material used and the system proposed is suitable for a high traffic environment. Changing cubicle divisions to have increased height at the rear of the cubicle to prevent users standing on the bench and peering over. Fully framed cubicles to be free standing & self-supporting, positioned in centre of the changing area. Create a locker area suitable for use by wheelchair users. The SolutionSolid Grade Laminate was used throughout the scheme. 12mm core boards, self-supporting, highly durable and impervious to water penetration.Hydroline system installed as a fully framed island constructed cubicle with profiled division panels at 2400mm.

At Exeter Park, PFC Corofil offered technical solutions by our ASFP trained technical team for a fully tested range of cavity barriers to enable Longworth design team to specify the correct barriers for each location throughout the open façade.

Architect: EMAStone: Bela SandstoneThis impressive new residential development consisting of 34 apartments is clad in Aztec Rainscreen façade finished in Bela Sandstone. This buff/blonde sandstone is a perfect match for the historical City of Glasgow and the surrounding Victorian tenements It follows on from the earlier use of this durable stone in North Street. Completed in 2018 and designed by KFK Design, Atrium Gardens is a new-build property with the rainscreen installed by Roof & Façade Systems and boasting its own refined, sleek and contemporary finish.

Bexley College is just over 100 years old. It moved to its last site in Belvedere in the mid-1960s and has recently moved again to a new £20m campus in Erith. ‘The overall look of the new college was extremely important from the offset, Martin Peat, Vice Principal of Finance and Resources explains.' Martin chose Bushboard’s Profiles toilet cubicle range, a robust and hardwearing system which features individual head rails for style and durability.Read the whole case study on our website.

Gradus Esplanade Plus primary barrier matting was installed to the main entrance and Boulevard 5000HD secondary barrier carpet to all side entrances, both in colourway Jackdaw (black) helping to reduce tracked in dirt and moisture and reduce overall maintenance costs.

As business evolves and requirements change in our fast-paced world, Movawall Systems Ltd continue to bring ground breaking, intuitive products to the industry and pride ourselves in being able to create unique and bespoke systems for all our clients, whatever the application. One of our latest projects which has been installed and tested has made us particularly proud and set a new standard in acoustic movable walls.The requirements on this project were clear and simple with very specific needs for one of the leading pharmaceutical companies and we were going to tackle it head on. A movable acoustic wall with radiation protection for a research and testing environment needing to maximise flexibility while still offering the safety and protection required in a radiology environment.Our Type 100SE semi-electrically operated movable wall was developed and tailor-made for this requirement; with X-Ray protection and specialised seals to ensure the ground-breaking radiation protection and acoustic levels would be achieved. Each wall weighed in the region of circa 6 tons and the top hung system was fitted with our Type “K“ track which allows for remote and varied stacking locations. The walls varied in width and height but were all finished in Rigato Formica laminate with aluminium protective edge trims. The vision panels in the pass doors were fitted with Med-X type single glazed glass between two layers of 4mm thick toughened glass.

Senior Architectural Systems has had a starring role in the creation of the new Arc Cinema in Daventry.The new cinema’s welcoming frontage has been created using a combination of Senior’s thermally-efficient slimline SF52 aluminium curtain wall system, alongside the company’s robust SPW501 aluminium commercial doors and stylish low U-value PURe® SLIDE doors. Designed to offer the perfect balance between daylighting and thermal comfort, Senior’s fenestration package was fabricated and installed by supply chain partners Acorn Aluminium for main contractor Willmott Dixon.The cinema has been designed by Marchini Curran Associates and the extensive use of glazing floods the main entrance, restaurant and bar areas with natural light during the day, and creates a show-stopping effect at dusk. The dark grey powder coated frames of the doors and curtain wall systems also perfectly complement the exterior façade design of grey and white cladding with feature multicoloured panels. The new Arc cinema in Daventry has been created as part of the wider £12.5m regeneration of the town centre.Senior has played significant roles in other cinema projects over the last few years, delivering the aluminium fenestration packages for the new Savoy cinema complex in Doncaster as well as completing work for the national chain Everyman.

The Port of Tyne is one of UK’s most efficient deep-sea ports, handling a diverse range of cargoes from cars to containers and bulk goods to renewable energy across five continents. They offer a unique end-to-end solution ensuring goods move safely, securely and efficientlyThe project4 Speedor Storms designed, manufactured and installed to mobile hoppersThe challenge:A key part of the port’s ship unloading procedure required fast and reliable doors to compliment their logistics process. Materials such as wood pellets are unloaded into hoppers which simultaneously load directly into lorries that drive into the hoppers. The process generates dust which must be controlled as a residential area is close by. These hoppers are in highly exposed areas and require a product that withstands strong winds.The Solution:The mobile hopper systems originally came with rigid doors that blew out as they were rated Class 3 and were not fit for purpose. We resolved the issue by installing robust Speedor Storms, the Speedor variant with exceptional wind resistance up to Class 5 (over 90 mph). Their automatic action and robust design ensured that the doors worked during all weather conditions ensuring the efficiency of the port is maintained.The success:The original project was to install 2 doors to the hopper systems. Due to the reliability of the first 2 doors, a further 2 Speedor Storms were installed a few years later. 

The United Kingdom Hydrographic Office (UKHO) is the UK’s agency for providing hydrographic and marine geospatial data to mariners and maritime organisations across the world. Their visually stunning new headquarters in Taunton has been designed based on the concept of contours and currents by multi-award winning architects, AHR. An impressive central atrium with feature stair connects the two wings with access to the upper floors reached by a feature stairway which leads onto open platforms and connecting walkways. The fluid lines and vast spaces gives the interior a sense of openness in such a large structure and is an incredibly inspiring environment in which to work. Lusso worked closely with BAM and AHR on the internal glazing requirements to create administration offices, a meeting suite, training rooms, as well as recreation and dining areas to the ground floor. The use of Lusso 25 single glazed partition system and Lusso 105 double glazed partition system allowed for the different acoustic and structural design specifications throughout the building. The clever use of glass partitions has ensured that the requirement for a “one team approach” design brief has been met. The UKHO can now boast highly impressive headquarters, befitting of a world leading geospatial information company. Opened by HRH The Princess Royal, it has now been nominated and won several design awards and is on course to achieve BREEAM Excellent.  

For the new office of one of the UK’s leading healthcare specialists, workplace interior design specialists, ID:SR – Sheppard Robson, specified the natural beauty of Forbo Flooring Systems’ Allura Flex Wood Luxury Vinyl Tiles (LVT) to help ‘bring the outside in’.  Occupying the first and second floor of a new seven-storey Grade A office building in Leeds, the healthcare specialist has brought over 250 staff together into one co-located environment. Expertly designed by ID:SR, the 25,000 sq ft space comprises a variety of agile work and social settings to support a range of activities, a dedicated client reception, meeting suite and lounge.   “To support employee wellbeing, the office also engages with the principles of biophilic design, so we incorporated natural looking materials where possible to emphasise the connection between people and nature. The beautiful and realistic wood effect of Forbo’s Allura Flex Wood LVT supported this idea of bringing the outside in. Offering convincing, authentic visuals and excellent functional performance, we used the finish in prominent positions of the office as we felt the flooring supported the overall concept of the scheme.”  Allura Flex Wood in the Weathered Oak colourway was fitted in a herringbone pattern with bursts of Seaweed Solid Oak, Charcoal Solid Oak and Smoke Solid Oak in the main reception and staff breakout areas. Thanks to its tackified installation, the high quality, dimensionally stable Allura Flex tiles provides answers to key issues such as limiting valuable downtime, the re-use of floors and minimising environmental impact, perfect for busy office spaces.  What’s more, Surestep Material in Cool Concrete was specified in the kitchenette of the staff breakout area, where there is an increased risk of slip. The safety flooring combines outstanding slip resistant properties with differentiated design and through the use of Step Crystals, the natural colourway offers a clean, fresh look and improved cleaning and maintenance properties. The PUR Pearl finish ensures that it is stain and chemical resistant.  

Jaguar Land Rover's site in Solihull is a major operation for the global car manufacturer. The nature of the production and logistics centre means that there is constantly high flow of industrial and domestic vehicle traffic around the building, as well as pedestrians. Brandsafe designed, supplied and installed a range of safety systems to meet the needs of the client, both aesthetically and operationally. The new pedestrian walkway system is a key component of this, with safety barriers and gates, as well as highly visible HGV clatter bars to help protect against vehicle collisions.

Forbo Flooring Systems' Flotex flocked floor coverings played a vital role in bringing the outside in during the design of an extra-care housing scheme, for Southampton City Council. The result is a design that ensures that the residents have a bright, healthy and hygienic environment to live in.

Waterproofing and damp proofing specialists, Severn Damp & Timber Preservation, installed a range of Triton Systems’ waterproofing materials to deal with water ingress around two skylights, formed within the concrete roof deck over a basement that extended into the garden of a domestic property.