Zenith® Brise Soleil

The Strata Zenith brise soleil system is made up of horizontal Z-profiled blades for maximum effectiveness. Each aluminium blade is 75 mm by 75 mm with concealed fixings to provide a seamless line of solar shading. A cassette system allows for efficient off-site construction.

Panel Construction:

Maple aluminium Zenith blade, formed into a cassette panel, projection and run length (not to exceed 3000mm) dependent of project location and wind loadings. Panels comprising of 6063 T6 extruded aluminium Zenith blades fixed between Zenith side arms with Maple Zenith clips, to form a cassette panel, fixed to purpose design bracketry. Zenith blades are set at the required pitch which protects against 62° solar angle.

Bracket Construction:

a)    Laser cut and folded brackets, designed and engineered to suit the project location, wind loadings and tolerances, manufactured from s275 (or superior) mild steel, and fixed direct to suitable fixings grounds.

b)    Laser cut brackets, designed and engineered to suit the project location, wind loadings and tolerances, manufactured from 5000 series (or superior) aluminium, and fixed into curtain walling mullions. Brackets and spring pins will be free issued for installation by the curtain walling subcontractor.

c)     Laser cut thermally broken brackets, designed and engineered to suit the project location, wind loadings and tolerances, manufactured from 5000 series (or superior) aluminium, and fixed into curtain walling mullions. Brackets and thermal break components will be free issued for installation by the curtain walling subcontractor.

Blade Colour/ Finish: Specific to each project – polyester powder-coated 60µm or anodized 25µm.

Bracket Colour/ Finish:

Specific to each project – hot dip galvanized or polyester powder-coated 60µm.