X-Vent Rooflight

X-Vent Rooflight

Glazing Vision Ltd Third party certifications:
  • BSI Kitemark

    BSI Kitemark

    Certificate type

  • QA Certificate

    QA Certificate

    Certificate type

  • Secured By Design

    Secured By Design

    Certificate type

CE approved glazed Automatic Opening Vent for use in fire safety systems to aid smoke ventilation. The xvent can also be used as a standard natural ventilation rooflight on a day to day basis.

Jump to:
+44 (0)1379 658300 www.glazingvision.co.uk

Description

Glazed heat and smoke ventilator for flat roof applications which can be used day to day to provide ventilation, opening to a maximum of 45°. Upon activation of a fire alarm, the X-Vent automatically opens to 140° and cannot be closed whilst the fire alarm is activated. It is powered by an external 24 V power supply. In the event of mains failure back up batteries housed inside the rooflight base automatically take over. When running off the battery the X-Vent emits a periodic audible signal, and the LED control switch flashes red, to warn of mains power loss.

The X-Vent mechanisms have an encoder output which is used by the control electronics to achieve closed loop synchronization. The base is thermally broken, and filled with insulation to improve thermal performance. The X-Vent can be integrated into the Flushglaze for larger glazing requirements. It responds to both one touch and press and hold requests.

Features and benefits:

  • Battery backup.
  • Concealed operating mechanism.
  • Flushglazed - no water ponding.
  • Heat soak tested low e safety glass.
  • Maximum daylight due to minimum framework.
  • Rigid two point opening.
  • Simple installation.

General information

Size

1400 mm x 1400 mm

1 m² internal ventilation.

1400 mm x 1900 mm

1.5 m² internal ventilation.

As drawing

As schedule

Color

RAL 7015 Grey outer, RAL 9010 inner, clear glass

Features

CE marked, automatically opens to 140°, thermally broken framework, battery back up as standard

Material

Aluminium, glass

Shape

Rectangular

WarrantyDescription

Manufacturer's warranty

Uniclass 2015

Pr_30_59_72_31 Framed rooflightsPrimary

CAWS

L10/45 Rooflights

L10/460 Rooflights

Specification data - Framed rooflights

Product Reference

X-Vent AOV

Size

1400 mm x 1400 mm

1 m² internal ventilation.

1400 mm x 1900 mm

1.5 m² internal ventilation.

As drawing

As schedule

Colour/ Finish

Qualicoat approved polyester powder-coated, RAL 7015/ RAL 9010

Standard. RAL 7015 slate grey on the exterior; RAL 9010 white interior of base.

Qualicoat approved polyester powder-coated, RAL, special order

Dual colour; consult manufacturer and insert requirements.

Height

Insert requirement, 150 mm minimum.

Accessories

None

BMS Integration

Enduroshield easy clean glass coating

Gives a non-stick surface making the glass easier to clean and keep clean, stay clean for longer and resist staining and discoloration.

Rain sensor

Remote control

Ritec Clearshield glass coating

Security system integration

Thermostat

Standard product features

Frame material:

Extruded thermally broken aluminium profiles, grade 6063 T6.

Glazing:

  • Outer: 6 mm clear toughened heat soak tested.
  • Spacer: 16 mm black silicone sealed argon filled cavity, warm edge spacer.
  • Inner: 6 mm clear soft low E toughened heat soak tested.

Kerb:

  • Height: 150 mm.
  • Thickness: 200 mm.

Power supply:

External 24 V, 28 A, 750 W mains powered supply. Back up batteries fitted inside rooflight base will automatically take over in the event of mains failure.

Drive mechanism:

Motor driven parallel linkage mechanism with encoder feedback, manual over-ride accessible from the inside only.

Polyester powder coat Paint finish:

To the Qualicoat standard.

Seals:

Combination of inner silicone rubber seal and outer EPDM bubble seal.

Security:

Mechanism cannot be back driven due to motor gearing reduction, and mechanism cannot be disconnected from lid whilst closed from the outside. Rooflight base is sealed to upstand with polybutyl sealant.

Rooflight control:

On board control printed circuit board (PCB) housed within IP rated enclosure, concealed in framework.

Visual quality of glass:

To the Hadamar standard.

Product Options

Kerb:

  • Pitch: Available 3–5°.
  • Width: Available 1400–1900 mm.
  • Length 1400 mm.

Other options:

Stand alone unit or integrated into fixed glazing.

Digital objects

Platform Compatible Version Certified to
IFC

IFC2X3

1

1.3
IFC

IFC2X3

1

1.3
Revit

Revit 2016

2

2.0
Download now from NBS National BIM Library

Third party certifications

  • ISO 9001 : Compliant company
  • IFC Certification Ltd: EN 12101-2:2003 / 1720-CPD-0037 : UKCA Marked
  • UKCA marked : Conforming to EN 12101-2:2003
  • ISO 14001 : Compliant company
  • National Association of Rooflight Manufacturers (NARM): Members
  • to LPS 2081 : Approved product
  • Loss Prevention Certification Board (LPCB): LPS 2081 Issue 1:2015 : Certificated product
  • Qualicoat: To EN 12206-1 : Approved Applicator

Similar products from Glazing Vision Ltd

Fixed Lantern Rooflight

Fixed Lantern Rooflight

Fixed Octagonal Pyramid Rooflight

Fixed Octagonal Pyramid Rooflight

Fixed Pyramid Rooflight

Fixed Pyramid Rooflight

Fixed Ridgeglaze Rooflight

Fixed Ridgeglaze Rooflight

Flushglaze Fixed Circular Rooflight

Flushglaze Fixed Circular Rooflight

Flushglaze Fixed Eaves Rooflight

Flushglaze Fixed Eaves Rooflight

Flushglaze Fixed Rooflight - One Wall Abutment

Flushglaze Fixed Rooflight - One Wall Abutment

Flushglaze Fixed Rooflight - Singlepart

Flushglaze Fixed Rooflight - Singlepart

Flushglaze Fixed Rooflight - Three Wall Abutment

Flushglaze Fixed Rooflight - Three Wall Abutment

Flushglaze Fixed Rooflight - Two Wall Abutment

Flushglaze Fixed Rooflight - Two Wall Abutment