Wood Cored Roll
Description

Premium Wood Cored Roll is used as the basis for lead sheet joints on flat roofing and pitched roofing as well as traditional 'hard' metal roofing. When there is the prospect of foot traffic, the wood cored roll joint is preferable to a hollow roll joint, as it is less prone to pressure damage.

Premium Wood Cored Rolls are available in both treated and untreated condition. Treated wood has been subjected to high pressure impregnation of a wood preservative, which protects the wood against timber rotting fungi and wood destroying insects.

Premium Wood Cored Rolls are unsuitable for use on curved surfaces of small radii, such as semi-circular dormer tops.

Features:

  • For lead sheet joints on flat or shallow pitched roofs.
  • Recommended for areas where ponding or storm flooding is possible.
  • Resistant to damage by foot traffic.
  • Forms aesthetically pleasing joint.

General information

Features

For lead sheet joints on flat or shallow pitched roofs

Recommended for areas where ponding or storm flooding is possible

Resistant to damage by foot traffic

Forms aesthetically pleasing joint

Uniclass 2015

Pr_20_76_88_83 Softwood sectionsPrimary

CAWS

H71/110 Lead sheet fully supported roof covering

H71/130 Lead sheet fully supported wall covering

H71/150 Lead sheet fully supported covering to dormers

H71/160 Lead-covered roofing panels

H71/170 Lead-covered cladding panels

H71/180 Lead-wrapped panels

H71/2 Lead sheet fully supported roof covering

H71/250 Weathering to

H71/27 Soakers for mitred hips to slate/ plain tile roofs

H71/30 Apron flashings

H71/310 Ridge/ hip rolls to lead roofs

H71/315 Ridge/ hip rolls to slate roofs

H71/35 Cover flashings

H71/41 Soakers and step flashings

H71/410 Apron flashings

H71/420 Cover flashings

H71/430 Cover flashings

H71/440 Soakers and step flashings

H71/45 Step and cover flashings

H71/450 Step and cover flashings

H71/452 Single-step and cover flashings

H71/454 Single-step flashings

H71/456 Step flashings with secret gutter

H71/458 Step and cover flashing with secret gutter

H71/460 Change of roof pitch flashings

H71/470 Flashings

H71/472 Chimney flashings to slate/ plain tile roofs

H71/474 Chimney flashings to single lap tile roofs

H71/476 Chimney damp-proof course

H71/478 Chimney damp-proof course

H71/490 Vertical tiling/ Slating bottom edge flashings

H71/492 Vertical tiling/ Slating top edge flashings

H71/494 Vertical tiling/ Slating side abutment step flashings

H71/496 Vertical tiling/ Slating angle soakers

H71/497 Lead damp-proof course/ Cavity tray at raking abutments

H71/498 Combined lead damp-proof course/ Cavity tray and cover flashing at horizontal abutments

H71/5 Lead sheet fully supported covering to dormers

H71/50 Flashings

H71/52 Chimney flashings

H71/54 Vertical tiling/ Slating bottom edge flashings

H71/55 Vertical tiling/ Slating top edge flashings

H71/56 Vertical tiling/ Slating side abutment step flashings

H71/57 Vertical slating angle soakers

Specification data - Softwood sections

Product Reference

38 mm zinc, treated

50 mm lead, treated

50 mm lead, untreated

50 mm zinc, treated

75 mm lead, treated

75 mm zinc, treated

Standard product features

Length:

2.4 m.

Similar products from Associated Lead Mills