NBS Source
List your products
Application

  • For decoupling ceramic and natural stone floor coverings from the substructure.
  • For deadening impact sound when laying ceramic and natural stone floor coverings with a relatively low design height.
  • On all load-bearing surfaces such as concrete and wooden floorboards (not stairs).
  • Underlay for floating floor coverings such as ready-to-lay parquet or laminate.
  • For residential type use. Not approved for wheeled loads with high concentrated loads.
  • Not for use under electric thin-bed heating elements.

Description

A thin-layer rubber granulate mat with a flexible mineral coating used for decoupling under ceramic floor coverings, laminate or ready-to-lay parquet.

Features:

  • Low structural height.
  • Low mass per unit area.
  • Simple to lay; economic way of reducing impact sound under ceramic and natural stone floor coverings.
  • Quick installation.
  • Stress-reducing underlay, decouples the covering from the surface.
  • Impact sound improved by 14 dB.

Applications:

  • For decoupling ceramic and natural stone floor coverings from the substructure.
  • For deadening impact sound when laying ceramic and natural stone floor coverings with a relatively low design height.
  • On all load-bearing surfaces such as concrete and wooden floorboards (not stairs).
  • Underlay for floating floor coverings such as ready-to-lay parquet or laminate.
  • For residential type use. Not approved for wheeled loads with high concentrated loads.
  • Not for use under electric thin-bed heating elements.

General information
Features

Low structural height

Low mass per unit area

Simple to lay; economic way of reducing impact sound under ceramic and natural stone floor coverings

Quick installation

Stress-reducing underlay, decouples the covering from the surface

Impact sound improved by 14 dB

Material

Polyurethane-bonded recycled rubber material with styrofoam flakes and a special, flexible, mineral coating

Size

1200 x 600 mm

Uniclass 2015
Sound attenuator infill units (Pr_35_93_13_80)Primary
Specification data - Sound attenuator infill units
Product Reference

wedi Nonstep Plan

Accessories

None

wedi Tools Joint Reinforcement Tape

wedi Tools Joint Reinforcement Tape Self-Adhesive

Standard product features

Material:

Polyurethane-bonded recycled rubber material with styrofoam flakes and a special, flexible, mineral coating.

Size:

1200 x 600 mm.

Thickness:

6 mm.

Technical properties:

  • Compressive resistance (at 30% deformation): 0.65 N/mm².
  • Density: 600 kg/m³.
  • Fire behaviour (to DIN 4102): B2.
  • Tear strength: 0.25 N/mm².
  • Temperature limit: -40°C to +115°C.

Product Options

Accessories:

- wedi Tools Joint Reinforcement Tape:

An alkali-resistant glass fibre reinforced fabric for reinforcing over entire board surface area when using wedi Nonstep Plan.

Literature
Similar products from wedi