weberset plus

A standard-setting cement-based polymer-modified non-slip adhesive for fixing porcelain, ceramic, quarry, terrazzo and terracotta tiles and natural stone to rigid interior and exterior floors and walls. Suitable for low porosity substrates such as power floated concrete or existing tiles.

Exceeds the requirements of BS EN 12004 for C2T.

Can be primed with PR360.

Constraints:

Weber AD250 admixture is required when fixing tiles to wooden substrates. Not recommended for tiles with resin backs.

Preparation:

• Ensure that all surfaces are clean, dry, sound and free from dust, grease or any contaminating barrier.

• Make good any unsound areas and remove flaky or peeling layers before tiling.

• Porous or dusty surfaces should be primed with Weber PR360 and allowed to dry before tiling.

• Check before use that the colour of the adhesive does not cause staining or discolouration of light coloured or translucent tiles.