Compare

weberfloor timber substrate system

Name: weberfloor timber substrate system
Brand: Saint-Gobain Weber
SKU: gLpiKq9UbmVZpiYzVmBP1V

Verified by manufacturer 6 months ago

Saint-Gobain Weber

Third party certifications:

EPD
Certificate type

Fibre-reinforced flooring system for timber substrates finished with floor coverings such as vinyl, laminate, carpet or tiles.

Jump to:

+44 (0)1525 718877 Website

Application

Cannot be used on external projects
Substrate must have a pull-off strength ≥1.0MPa
Substrate must be in a suitable condition to be able to receive a weberfloor screed

Description

weberfloor timber substrate system is designed for application onto timber substrates. Fibre reinforcement allows application at as little as 10mm thickness. This system can be walked on from as little as 2 hours and is capable of rapid overlay with tiles or a moisture sensitive flooring finish.

Features and benefits:

Suitable for timber substrates
Provides an ultra smooth surface – perfect for final floor finishes
System can be applied at as little as 10mm and up to 50mm
Foot traffic after 2 hours
Suitable for rapid overlay with final floor finishes
Pump or hand applied
Compatible with weberfloor 4716 acrylic primer

General information

Color	Grey Other
Finish	Other Guidance for specification option: Finished with floor coverings such as laminate, vinyl, carpet or tiles.
Material	Timber Cementitious Other
Shape	Other

Uniclass	Ss_30_42_15_10 Bonded or partially bonded cementitious levelling screed systemsPrimary
CAWS	K21/140 Battened wood laminate flooring K21/10 Wood laminate flooring K21/145 Composite laminate flooring K21/115 Wood laminate flooring K21/146 Laminate flooring M50/15 Carpet tiling M50/130 Carpet tiling M40/5 Tiling to M41/110 Terrazzo tiling M41/110 Terrazzo tiling M40/110 Tiling to

Product range	Flooring solutions / Timber substrate solutions

Specification data - Bonded or partially bonded cementitious levelling screed systems

Preparation	Preparation of substrate.
Bonding coat	Guidance for specification option: Consult manufacturer and insert requirements or omit.
Reinforcement for crack control	Guidance for specification option: Consult manufacturer and insert requirements or omit.
Screed	Self-smoothing levelling screed mixes. Guidance for specification option: weberfloor fibre 4310. A self-smoothing base and renovation screed. Fibre modified for added durability. Pump or hand applied, self-smoothing, fibre-reinforced base or renovation screed for floors, with Low Dust TechnologyTM, which gives a strong base layer for receiving tiles or a thin topping screed. The product is formulated from special cements, aggregates and chemical admixtures.
Surface treatment	Guidance for specification option: Consult manufacturer and insert requirements or omit.
Accessories	Not required. weberset tile adhesive. Guidance for specification option: Range of cement based tile adhesives. Suitable for large format or heavier tiles.

Primer	Styrene acrylate primer. Guidance for specification option: weberfloor 4716. Regulates the porosity of the substrate and improves adhesion. Designed for priming (pre-treating) all substrates prior to application of weberfloor products. Should be diluted with clean water.
Floor covering	Guidance for specification option: Finished with floor coverings such as laminate, vinyl, carpet or tiles. Consult manufacturer and insert requirements.
Drying time	Two hours (foot traffic); 16+ hours (floor covering).
Base Substrate	Timber.