Verified by manufacturer 2 months ago
EPD
Certificate type
ISO 14001 Environmental Management Systems
Certificate type
ISO 45001 Health and Safety Management
Certificate type
ISO 9001 Quality Management
Certificate type
Durable industrial flooring system with a high-precision finish designed to be covered with a decorative resin.
weberfloor resin finish system is a durable, high precision system ideal for use where a resin finish is required. The system has been designed to receive a resin coating in as little as 24 hours. This system should be applied fully bonded, with the optional addition of a base coat where weak substrates first need to be made good.
Features and benefits:
Color | Grey |
Finish | Smooth |
Material | Cementitious Resin |
Shape | Formless |
Uniclass | |
CAWS | M12/120 Resin flooring M12/12 Resin flooring M12/110 Resin flooring M12/10 Resin flooring |
Product range |
Substrate | |
Testing | Surface hardness of substrate(s).Guidance for specification option: The surface strength of the substrate must be greater than 1 N/mm² in residential or commercial areas and 1.5 N/mm² in industrial areas. |
Preparation | Preparation of existing substrates.Guidance for specification option: The substrate should be clean and free from dust, cement, grease or other impurities which might prevent weberfloor 4716 from adhering to the substrate. For correct film formation the substrate temperature should not fall below +6°C. For best results the temperature of the work area should be between +10 and +15°C. |
Levelling screed | Bonded or partially bonded cementitious levelling screed system.Guidance for specification option: weberfloor industry rapid 4655.
|
Primer | Resin coating primers.Guidance for specification option: weberfloor 4716.
|
Resin flooring | Resin floor coatings. |
Reinforcement | Guidance for specification option: Consult manufacturer and insert requirements or omit. |
Surface treatment | Guidance for specification option: Consult manufacturer and insert requirements or omit. |
Resin skirtings and upstands | Guidance for specification option: Consult manufacturer and insert requirements or omit. |
System accessories | Not required.weberfloorbase rapid 4360.Guidance for specification option:
weberfloor DPM.Guidance for specification option:
|
Cure time | 2 hours (foot traffic); 24 hours (light industrial traffic); 1 week (full industrial traffic). |
Slip resistance | 66 PVT (dry); 45 PVT (wet); 22 PVT (oil). Manufacturer guidanceweberfloor industry rapid 4655. |
CompressiveStrength | C30. Manufacturer guidanceweberfloor industry rapid 4655. |
Flexural strength | F8. Manufacturer guidanceweberfloor industry rapid 4655. |
Country of material origin | United Kingdom |
Country of product manufacture | United Kingdom |
Material | Cementitious Resin |
weberfloor resin finish system - System spec card
weberfloor 4716 - Technical datasheet
weberfloor industry rapid 4655 - Technical datasheet
weberfloor industrial base 4600 - Technical datasheet
weberfloor 4720 epoxy primer - Technical datasheet
weberfloor DPM Pro - Technical datasheet
Inspiration Guide
Solutions for construction - Introducing Weber
weberfloor application guide
Flooring Guide
Supply Chain Sustainability School Gold Status