This product is no longer available —
Composite decking boards with the timeless dignity of aged oak.
Use Millboard decking for all standard outdoor flooring applications (e.g. in residential, commercial, education, healthcare, leisure and hospitality) including the following:
Millboard decking board is a polyurethane resin mineral board, hand-moulded from real oak, and hand-finished. Millboard decking is slip-resistant, splinter-free, anti-static and its non-porous composition makes it resistant to algae and insect infestations. UV and weather-stability, stain resistance and resistance to rotting and warping, make it a low maintenance product for use in all standard outdoor flooring applications. To be used with Millboard Durafix® stainless steel screw fixings.
Features and benefits:
Applications:
Use Millboard decking for all standard outdoor flooring applications (e.g. in residential, commercial, education, healthcare, leisure and hospitality) including the following:
Material | The structural core of Millboard decking is a blend of natural minerals bonded in a polymer resin, with long fibre reinforcement for mechanical strength and durability The top surface is a textured, resilient Lastane® layer which is chemically melded to the core and hand-tinted using 2K component pigments that resist fading and UV damage |
Size | 200 x 32 x 3600 mm |
Uniclass 2015 | |
CAWS | Q55/110 Deck Q55/380 Deck boards |
Product Reference | Weathered Oak Decking |
Colour | DriftwoodEmberedVintage |
Fixings | Millboard Durafix® stainless steel T15 decking screws 4.5 x 60 mmMillboard Durafix® stainless steel T15 decking screws 4.5 x 45 mmMillboard Durafix® stainless steel T15 fascia screws 4.5 x 35 mm |
Finishing profiles | Flexible Bullnose edgingSquare edgingBullnose BoardFascia |
Sub frame | DuoSpan 51 mm JoistDuoSpan 99 mm JoistDuoSpan 136 mm BeamPlas-Pro 100 x 100 mm Post |
Joist supports | DuoLift 15-60 mm Joist CradleDuoLift 20 mm Self-Levelling JointDuoLift 45 mm RiserDuoLift 45 mm FootDuoLift Acoustic Separation PadDuoSpan 136 mm BeamPlas-Pro 100 x 100 mm Post |
Standard product features | Size: 200 x 32 x 3600 mm. Material:
Surface finish: Moulded from hand selected antique oak samples. Edge detail: Square. Joist spacing: The Weathered Oak boards need to be supported at 400 mm centres for residential applications, for commercial applications, bridges, balconies and steps this needs to be reduced to 300 mm centres. Board spacing: 4 mm gap between boards, 1 mm gap at the ends of the boards. Warranty:
Technical Performance:
|
Product Options | Installation: For all applications Millboard decking boards to be installed with a 4mm gap between the boards and a 1 mm gap at butt ends, to facilitate drainage. There is no need for a ventilation gap to be left under Millboard decking boards. The maximum unsupported overhang for the boards is 50 mm, each cut board must be supported by a minimum of three joists. Each board must be screwed down with 2 x Millboard Durafix® stainless steel screw fixings where a board crosses a joist, and 3 x Millboard Durafix® stainless steel screw fixings at the ends of the boards. Ground level application (soft surface): Millboard decking boards installed over DuoSpan 99 mm Joists and Beams, Beams supported by Plas-Pro Posts concreted into the ground. Installed with DuoSpan brackets to the recommendations set out in installation guide found on manufacturers website. Hard surfaces application (roof terrace, concrete base): Millboard decking boards installed over DuoSpan Joists, Joists supported by DuoLift joists supports onto a solid/stable base. Installed with DuoSpan brackets to the recommendations set out in installation guide found on manufacturers website. |