Wave-On Sensor for Urinal Control

The Urinal control sensor is to be used in conjunction with the 2 Channel Control System and can be mounted directly to the urinal bowl or wall of the washroom. For use with UC00-029 (Brushed 316 stainless steel) and UC00-028 (Polished 316 stainless steel) bezels.

Offering substantial water savings and a short payback period, installing urinal controls is often the first step in a water management programme. Urinal controls also ensure that washrooms remain clean and fresh, by programming the controls to meet the individual needs of each building. Variable settings allow adjustable time delays between flushing, providing maximum efficiency and savings. Operation is simple; a passive infrared (PIR) detector detects movement within the ‘sensing area’, switching the unit into a timing mode. After a pre-set time, the separately installed solenoid valve opens. Water flows into the cistern and therefore activates the flushing cycle. The fill-time for the cistern can be customized by the user, using the appropriate switches on the Flushmatic board. The system’s fast fill design helps eliminate scale problems associated with slow or drip fed systems. An automatic flush every 12 hours is also programmed into the unit, should the system not be used during that time. Variable settings allow adjustable time delays between flushing providing maximum efficiency and savings.

- Individual Control System:

The individual operation urinal control system can be supplied for single or double station urinals.

• Standard sensor comes with 50 mm bezel.
• Single or double station urinal flushing.
• Only flushes when user walks away from urinal.
• Mains power only.

Features and benefits:

• Up to 80% savings on water costs.
• Extremely reliable.
• Low maintenance.
• Low power consumption.
• Solenoid valve included.
• Includes power PSU or batteries.
• Adjustable fill time (15 minutes maximum).
• Adjustable delay time.
• Janitorial flush (after 12 hours of non-use).
• Urinal Flush Valve AutoSensor.