NBS Source
I'm a manufacturer

Waterproof Tanking Membrane for the protection of below ground structures with Newton HydroCoat 107 Elastic 2K - Cementitious Waterproofing Membrane

Verified by manufacturer 5 months ago

Newton Waterproofing Systems Third party certifications:
  • KIWA BDA

    KIWA BDA

    Certificate type

Third-Party Accredited BDA Cementitious flexible waterproofing membrane for the protection of basement structures. Type A barrier Tanking solution in accordance with BS8102:2022 accepted by NHBC

Jump to:
BOS
01732 496 517 Website

Application

Waterproofing of:

• Podium decks, flat roofs, terraces and balconies

• Water-retaining structures such as water tanks and

reservoirs

• Earth-retaining foundation walls to both the positive

and negative pressure

• Internal concrete surfaces of walls and rafts or slabs to

earth-retained structures such as basements,

  • car parks, plant rooms and lift-pits


METHOD OF APPLICATION

• Squeegee

• Roller

• Airless Spray

• Pin Leveller

• Brush

• Trowel

Description

Cementitious coating for the waterproofing and protection of concrete and masonry. Can be spray-applied so ideal for large projects. Suited to the waterproofing of reservoirs, tunnels, water tanks, basements, podium decks, flat roofs and balconies.


Features and benefits:

  • Pre-packaged materials easily mixed on site.
  • Tough, flexible coating which maintains its elastomeric properties even under immersed conditions to accommodate movement in cracks.
  • Good abrasion and very high resistance to freeze/ thaw cycles and de-icing salts.
  • Excellent adhesion to sound prepared concrete and masonry substrates, as well as steel.
  • Dense matrix offers low permeability to water, even at 10 bar pressure, and very high diffusion resistance to carbon dioxide gas.
  • Suitable for positive and negative waterproofing of earth-retaining structures as well as covered decks.
  • A 2 mm coat provides the equivalent to 135 mm of good quality concrete cover.
  • Can be applied to damp substrates in temperatures down to 5°C.
  • Water-based product, free from hazardous solvents, ideal for use in confined spaces. Non-toxic when cured.
  • Correctly prepared suitable substrates include concrete of at least 20 kN, steel, masonry and screed.
  • Can be applied via squeegee, roller, airless spray, pin leveller, brush or trowel.
  • CE marked and manufactured in accordance with EN 1504-2: 2004.
  • Guaranteed to resist weathering for up to ten years.


Curing:

  • Ready for next coat: At 5°C: After 8 hours; at 10°C: After 7 hours; at 15°C: After 6 hours; at 20°C: After 5 hours; at 25°C: After 3 hours.
  • To be kept rain-free: At 5°C: For 5 hours; at 10°C: For 4 hours; at 15°C: For 3 hours; at 20°C: For 2.5 hours; at 25°C: For 2 hours.
  • Ready for temporary traffic/ protection boards: At 5°C: After 72 hours; at 10°C: After 72 hours; at 15°C: After 72 hours; at 20°C: After 48 hours; at 25°C: After 48 hours.
  • Ready for flood/ hosepipe test: After 7 days (at all temperatures).
  • Fully cured: After 28 days (at all temperatures).

General information

Color

Grey

Finish

Cement

Guidance for specification option:

Smooth, matt grey coating.

Material

Cementitious

Guidance for specification option:

Cementitious flexible waterproofing membrane.

Shape

Other

Guidance for specification option:

2 mm thick waterproof membrane.

Warranty description

Lifetime

Guidance for specification option:

Newton 107F is guaranteed to resist weathering for up to 10-years. The membrane is not UV colour stable and will slightly fade in colour over time, and it may take a few months for the colour to be consistent. Over time discolouration due to weathering may take place, but the membrane will be serviceable

Uniclass

Pr_20_31_53_14 Cementitious tanking mortarsPrimary

CAWS

J10/110 Proprietary mortar

J31/130 Inverted roof coating

Q37/110 Intensive green roof

Q37/130 Extensive green roof

Q37/310 Inverted roof insulation

Product range

Liquid Waterproofing Membranes

Specification data - Cementitious tanking mortars

Third party product certification

BDA Agrément® BAB 18-026-P-A-UK.

Adhesion to concrete

≥ 0.8 MPa BS EN 1542.

TensileStrength

Ambient: 0.5 MPa BS 6319-7:1994. Immersed: 0.4 MPa BS 6319-7:1994.

Elongation

Ambient: 120 - 130 % manufacturer test. Immersed: 70 - 80 MPa manufacturer test.

Loading capability – 28 days

8 to 10 MPa BS 4551.

Hardness

84.0 Shore A BS EN ISO 868:2003.

Water permeability coefficient

5.37 x 10-16 m/sec DIN 1048 Part 1.

Water vapour diffusion resistance

Sd value: 1.55 m BS EN ISO 7783-2. µ value: 775 µ.

7.75 MNs/g.

Manufacturer guidance

Calculation from Sd value.

Water resistance

Positive side: 10.0 Bar DIN 1048. Negative side: 1.50 Bar DIN 1048.

Reaction to fire classification

Euroclass Bs1, d0 BS EN 13501-1.

UV resistance

Stable but will discolour, 50 years UNI EN ISO 11507:2007.

pH

12.

Thickness

2 mm.

Odour

Low (polymeric).

Volatile organic compounds (VOC) content

1.76 g/L (0 when cured).

Capacity

30 kg in two parts - 10 kg Part A (Powder) and 20 kg Part B (Liquid).

Sustainability data

Country of material origin

United Kingdom

Country of product manufacture

United Kingdom

Material

Cementitious

Guidance for specification option:

Cementitious flexible waterproofing membrane.

Recyclability

0

BIM objects

BOS

NBS BIM Object Standard

This BIM object has been authored to meet the requirements of the NBS BIM Object Standard.

Find out more about the NBS BIM Object Standard.

Platform Compatible Version
Revit

Revit 2015

4

IFC

IFC2X3

2

Third party certifications

KIWA BDA

KIWA BDA

Newton HydroCoat 107 Elastic 2K

Literature

HydroCoat 107 Elastic 2K TDS

HydroCoat 107 Elastic 2K TDS

Case studies

Flooded Shop Basement Refurbishment, Chelsea

Flooded Shop Basement Refurbishment, Chelsea

Waterproofing a Luxury London Hotel

Waterproofing a Luxury London Hotel