Watco Industrial Wall Coating
Verified by manufacturer 5 months ago
High build, one-coat emulsion with exceptional covering power. Specially formulated for industrial and commercial premises.
Application
Suitable for: Internal concrete, brick, render, plaster or previously painted surfaces.
Surface preparation
A minimum of surface preparation is necessary, but contaminants and any loose material should be removed. Surfaces which are loose and friable or very porous should be primed with a 50% dilution of Industrial Wall Coating with water.
Application
If appearance is critical we recommend the application of a small trial area first.
Watco Industrial Wall Coating is best applied in one thick coat with a 5” brush. A paint roller may be used, but as it applies more sparingly, a second application may be necessary. To spray or in exceptional temperature conditions, advice should be obtained from Watco’s Technical Department.
Description
This coating is designed for industrial and commercial settings, offering exceptional coverage and protection for walls and ceilings. After just one coat, its non-drip, high-build formula provides superb hiding power leaving a bright clean finish.
Features and benefits:
- Covers in one coat.
- High build, non-drip formulation.
- Fast drying and easy to apply.
- Can be spray applied.
Areas of use:
- Industrial environments
- Production and storage areas
General information
Color | White Grey Cream Beige Yellow |
Finish | Matt |
Material | Acrylic Guidance for specification option: High opacity, water based thick acrylic emulsion. |
Uniclass | |
CAWS | M60/170 Masonry coating M60/18 Special coating |
Product range |
Specification data - Water-based masonry paints
Texture | Smooth, high-build, matt finish. |
Colour | White.Grey.Cream.Beige.Yellow.Red.Green.Ivory.Pink.Purple. |
Volatile organic compound (VOC) level | 10 g/L. |
Coverage | 50 m² per 10 L. |
Sustainability data
Country of product manufacture | United Kingdom |
Literature
Technical Data Sheet: Industrial Wall Coating