VisionVent Manual Operation Rooflight

A range of hinged rooflights available in various configurations and sizes. The VisionVent is a thermally broken hinged flat roof vent which can be installed on a flat (minimum 3°) or pitched roof, or even incorporated into a Flushglaze rooflight for large areas of glazing where there is a requirement for ventilation. The product has been designed with a minimal amount of visible internal framework and concealment of the electrical operators within the frame, giving a 100% clear glass area. It is available in manual, chain actuated and electric versions which can also be integrated into larger modular systems. The Integrated versions are essentially identical to the solo equivalent, but are designed to be inset into Flushglaze framing as part of a modular rooflight. There are no visible kerb fixings through the use of the external clip on cover.

Features and benefits:

• Concealed operating mechanism.
• Dual colour Qualicoat approved powder coated finish.
• Thermally broken framework.
• Heat soak tested low e safety glass.
• Maximum daylight due to minimum framework.
• Rigid two point opening.
• Simple installation.
• Security: Electrically hinged VisionVent is part of Glazing Visions Secure and Secure+ range of Secured by Design rooflights tested to LPS2081 Issue 1:2015 and compliant with Building Regulations Approved Document Q – Security in Dwellings.
• Visual quality of glass: To the Hadamar standard.
• Drive mechanism: Motor driven scissor linkage mechanism with encoder feedback for synchronisation.
• Rooflight control: On board control printed circuit board (PCB) housed within IP-rated enclosure.
• The Rooflight Association Member
• Loss Prevention Certification Board (LPCB): LPS 2081 Issue 1:2015 : certificated product.
• Qualicoat: approved applicator.
• To ISO 9001, ISO 14001 and LPS 2081.