Vibrafoam - High Performance Vibration Isolation Materials - Floating Construction Impact Insulation

At low compression the material has an almost linear characteristic. At higher loads or compressions of the bedding, the spring characteristic takes a degressive course. Vibrafoam reacts to additional static and dynamic forces very softly. This enables optimal vibration insulation over a wide load range. At higher compressions the characteristic is progressive. The special properties of the material make it resistant to temporary peak loads. The product is selected based on the expected compressive stress in the material. The choice of different product thicknesses and/ or the option of two-layer installation guarantees optimal vibration insulation and structure-borne sound attenuation.

Vibrafoam can be processed horizontally and vertically for vibration insulation. If it needs to be cut to size, this can be done with a carpet knife. The insulating mats are butt-jointed during installation and sealed with a suitable adhesive tape. To increase the effectiveness, strip or point load bedding can be inserted. This is desirable if the optimal working range cannot be achieved fullsurface bedding due to the existing low loads (increasing the compressive stress).