Unleaded Inter-loc Horizontal Cavity Trays
Verified by manufacturer 5 months ago
IL4 four-brick-long horizontal cavity tray, new build applications
IL4 four-brick-long horizontal cavity tray, new build applications
ISO 9001 Quality Management
Certificate type
Preformed horizontal cavity tray system for new build and existing walls.
Application
- At the abutment of a flat roof with a cavity wall.
- At the abutment of a lean-to or mono pitch roof with a cavity wall.
- Over concrete ring beams.
- Over airbricks, cavity liners, ducts, meter boxes, etc.
- On external walls (not exceeding 102.5 mm in thickness) built from standard brickwork, blockwork or stone.
- Clear cavity widths of 50–125 mm.
Description
Preformed horizontal cavity tray system for new build and existing walls.
Features and benefits:
- Fits all clear cavity sizes up to 125 mm.
- Suitable for brick, block and stone wall construction (cutting of masonry may be required).
- 150 mm-high back upstand exceeds minimum requirements of NHBC.
- Angled section between cavity.
- Interlocking mechanism for joining tray lengths to eliminate tray jointing.
- Built to brick bonding lengths for ease of use.
- Angled section between cavity tray base and rear upstand automatically sheds water to the outer leaf.
- Built independent to the inner leaf will enable inner and outer leafs to be built independently, if required.
- Available in two lengths: four-brick for general use and two-brick for reducing waste when making up a run of cavity tray to the required length.
- Can be specified separately with a pre-applied polystyrene strip mortar barrier.
Quality:
- Satisfies all NHBC requirements.
- Manufactured to BS EN ISO 9001 and BS EN ISO 14001.
- Complies with all relevant Building Regulations.
- Meets all relevant British Standards.
General information
Color | Black |
Material | Polypropylene |
Uniclass | |
CAWS | F30/370 Preformed cavity trays F30/56 Preformed cavity trays |
Specification data - Preformed cavity trays
Material | Polypropylene (PE). |
To fit cavity width | 50–125 mm. |
Height | 150 mm. |
Length (effective) | 900 mm (four bricks). |
Accessories | None.Ext 09 - external 90° corner.Guidance for specification option: Effective length: 220 mm (one brick). Int 09 - internal 90° corner.Guidance for specification option: Effective length: 220 mm (one brick). Ext 135 - external 135° corner.Guidance for specification option: Effective length: 330 mm. Int 135 - internal 135° corner.Guidance for specification option: Effective length: 330 mm. SERH - Stopend, right handed.SELH - Stopend, left handed. |
Third party certifications
ISO 9001 Quality Management
ISO 9001 Certificate
Literature
Timloc Building Products Inter-loc Horizontal Cavity Trays Datasheet