Ultratop Industrial
Verified by manufacturer 1 month ago
Ultra-quick setting, smoothing, wearing screed for high abrasion-resistant Industrial floor coverings at a thickness from 5-40 mm.
Application
For professional use. Can be spread by hand or with a pump in a single layer of 5 to 40 mm. A smoother can be used for a natural finish. Used for levelling or smoothing new or existing concrete and screed substrates, to make them suitable for industrial use. Application examples include:
- New floors in workshops, factories, store rooms, plant rooms, garages and warehouses.
- Abrasion resistant floors on concrete and screed.
- Industrial floors that must be protected with epoxy coatings and paints in chemical and food processing plants, textile mills and tanneries.
- Areas where rubber wheeled vehicles are in use.
Floors made using Ultratop Industrial must be protected and then made non-absorbent using a Mapei finishing system – consult manufacturer for further information.
Consult manufacturer's literature for information on recommended substrate preparation and conditions not suitable for the application of this product.
Description
Self-levelling industrial floor screed based on hydraulic binders, for use on abrasion resistant flooring.
Features and benefits:
- Can be left as a finished floor.
- High mechanical strength.
- Resistant to abrasion.
- Versatile.
- Easy to apply.
- Quick setting; further finishing coats may be applied after a short time.
- High level of compressive and flexural strength.
- Bonds well to the substrate.
- CE marked and manufactured in accordance with EN 13813, 'Screeds and materials for screeds – Materials for screeds – Properties and requirements', and classified as CT-C40-F10-A9-A2fl-s1 – consult manufacturer for information.
General information
Color | Grey |
Material | Cementitious |
Uniclass | |
CAWS | M10/130 Proprietary quick drying levelling screeds M10/19 Proprietary screeds to BS EN 13813 M10/195 Proprietary screeds to BS EN 13813 M10/7 Proprietary quick drying levelling screeds |
Specification data - Ready-mixed levelling and wearing screeds
Compressive strength | To EN 13892-2, at 23°C, after 24 hours: ≥ 20 N/mm²; after 72 hours: ≥ 25 N/mm²; after 7 days: ≥ 30 N/mm²; after 28 days: ≥ 40 N/mm². |
Flexural strength | To EN 13892-2, at 23°C, after 24 hours: ≥ 5 N/mm²; after 72 hours: ≥ 7 N/mm²; after 7 days: ≥ 9 N/mm²; after 28 days: ≥ 11 N/mm². |
Colour | Grey. |
Form | Fine powder. |
Composition | Quick drying and quick setting binders, specially graded silica sand, synthetic resins and additives. |
Density | 2000–2100 kg/m³ (mix); 1300 kg/m³ (bulk). |
Solids content | 100%. |
Mix | 17—19 parts water per 100 parts by weight of Ultratop Industrial. |
pH value | 12. |
Application temperature | 5–35°C. |
Setting time | 60 minutes. Guidance for specification option: Suitable for light foot traffic: After 3–4 hours. |
Adhesion | To EN 13892-8, at 23°C, after 24 hours: 2.5 N/mm²; after 28 days: 2.5 N/mm² (substrate failure). Manufacturer guidanceTo concrete. |
Abrasion resistance | To ASTM D4060 (at 5°C), after 7 days: 1.7 g; after 28 days: 1 g. (at 23°C): after 7 days: 0.7 g; after 28 days: 0.6 g (expressed as loss in weight). Guidance for specification option: Böhme abrasion test, to EN 13892-3): At 23°C: after 28 days: 9 cm³. Manufacturer guidanceTaber abrasion test. |
Reaction to fire | To EN 13501-1, A2fl-s1. |
BIM objects
NBS BIM Object Standard
This BIM object has been authored to meet the requirements of the NBS BIM Object Standard.
Find out more about the NBS BIM Object Standard.
| Platform | Compatible | Version |
|---|---|---|
 IFC | IFC2X3 | 2 |
 Revit | Revit 2015 | 3 |
Similar products from Mapei (UK) Ltd
Ultratop Loft F
Ultratop Loft W