Type 200

Panels:

• Aluminium frame with double skin cladding of 12 mm, high density particleboard. Choice of panel finishes from manufacturer's standard range.

• Espagnolette locking of individual panels by removable handle.

• Leading door of each run operates as full height pass door.

• Glazing cutouts or special function panels to special order.

• Hinges - satin anodized aluminium with loose pins and silicon rubber seals.

• Fixed double sweep strips, top and bottom.

Partition assembly:

Refer to manufacturer’s drawings or schedule for disposition of specified elements.

Acoustic performance:

Can be used to limit noise transmission between rooms.

• Tested to achieve sound reduction ratings of up to Rw 52 dB, measured in accordance with EN ISO 140-3.

• Insulation typically related to panel weight. Average achieved site insulation typically less than laboratory conditions due to flanking structures.

Acoustic insulation:

Choose from construction offering the following nominal performance:

• Rw 41 dB: Weight: 26 kg/m²; Thickness; 80 mm with exposed edge trims.

• Rw 44 dB: Weight: 30 kg/m²; Thickness: 80 mm with exposed edge trims.

• Rw 47 dB: Weight: 35 kg/m²; Thickness; 80 mm with exposed edge trims.

• Rw 49 dB: Weight: 40 kg/m²; Thickness: 80 mm with exposed edge trims.

• Rw 50 dB: Weight: 41 kg/m²; Thickness: 80 mm with exposed edge trims.

• Rw 52 dB: Weight: 42 kg/m²; Thickness: 80 mm with exposed edge trims.

Track layout:

• Centrefold, single unit: Pivoted at panel centre. Top hung or floor supported.

• Centrefold, bi-parting: Pivoted at panel centre. Top hung or floor supported.

• Endfold, single unit: Pivoted at panel end. Floor supported only.

• Endfold, bi-parting: Pivoted at panel end. Floor supported only.

Ceiling track type:

Two part sliding profiles accommodate variations in structure, whilst maintaining consistent partition opening.

• Floor supported option: Ceiling guide track with SAA floor rail. 103 mm wide, 9 mm high overall. Overall protrudes 4 mm only above floor finish.

• Bottom rollers with radial ball bearings fitted to alternate panels, running on aluminium floor rail. Self-lubricating nylon rollers running in non-loadbearing top guide track, adjustable for variations in height.

• Top hung option: Ceiling running track (no floor rail required). Heavy duty aluminium head track. Extended bottom butyl rubber double sweep strips.

Panel:

- Type:

Where panel varies within the partition assembly, insert identifiers for panels after each selection, cross referenced to drawing or schedule.