Two Part Tie
Verified by manufacturer 3 months ago
Two part ties for larger cavity construction, greater than 150 mm, and up to 350 mm.
Application
Suitable for use in larger cavity construction from 150 mm to 350 mm.
Description
Two part ties designed for use in larger cavity construction from 150 mm to 350 mm. Inner part is built into the inner leaf of masonry. Outer part is fixed as outer leaf is built and is produced to suit the application. An embedment of 75 mm is required at each end.
Features and benefits:
- Eliminates on-site hazards.
- Easy installation.
- Manufactured from corrosion resistant stainless steel.
- Inner ties are manufactured in a standard length of 175 mm.
- Outer tie length accommodates the variation in the cavity width.
- Suitable for cavities larger than 150 mm, for partial and full-fill..
- Tested to exceed load requirements for a Type 2 tie to PD6697 for cavities up to 350 mm.
- CE marked to BS EN 845-1.
General information
Color | Silver |
Material | Stainless steel Guidance for specification option: Grade 1.4301 (304), standard. Grade 1.4401 (316), optional. |
Shape | Other |
Uniclass | |
CAWS | F30/214 Cavity wall ties F30/215 Cavity wall ties used with partial fill insulation F30/220 Wall ties F30/24 Cavity wall ties F30/25 Cavity wall ties used with partial fill insulation F30/26 Wall ties |
Specification data - Cavity wall ties
Standard | To BS EN 845-1. |
Tie type | PD 6697 Type 2 (Masonry – general purpose). |
Material | Stainless steel, grade 1.4301 (304).Guidance for specification option: Standard. Stainless steel, grade 1.4401 (316).Guidance for specification option: Optional. |
Accessories | No required. WIC. Guidance for specification option: Plastic insulation retaining clip. |
Section | 175 mm. 225 mm. Manufacturer guidanceStandard inner section. |