NBS Source
List your products
Description

A complete water control system specially designed for the removal of groundwater from basement cavity drainage membrane systems. The system comprises of a polyethylene sump, locking access cover (pedestrian duty, not suitable for roadways), two powerful submersible pumps and a fittings kit. The system is very versatile, enabling the installer to locate inlets to their specifications.

It is identical to the Aqua Pump Pro system but is supplied with two mains powered pumps. These can be plumbed to either a single discharge outlet or to two separate outlets from the sump. The second mains pump is located on the raised foot within the chamber and provides back up to the primary pump and additional capacity to the system if required.

Features:

  • Pump capacity of 132 L/ min at 7 m head (each).
  • Quick and easy to install.
  • Standard 40 mm discharge pipes.

General information
Features

Pump capacity of 132 L/ min at 7 m head (each)

Quick and easy to install

Standard 40 mm discharge pipes

Uniclass 2015 Private packaged pumping stations (Pr_70_55_76_62)
Specification data
Product Reference

Triton Aqua Pump Pro Plus

Accessories

None

1¼” brass gate valve

12 V, 7 Ah Battery

50 mm rubber seal (inlet/ cable duct)

110 mm rubber seal (drainage inlet)

Access cover, recessed 350 x 350 mm

High level alarm (mains operated)

High level alarm (mains/ battery operated)

Standard product features

Pumps:

Two mains powered, powerful 240 V submersible pumps with float arm. They are capable of pumping up to 132 L/ min to a maximum head of 7 m (each).

Sump basin:

A red polyethylene pre-formed chamber, measuring 600 high with a diameter of 550 mm. It is most commonly located into the floor, finishing flush with the surrounding floor level. The sump basin is supplied with a locking, 350 x 350 mm access cover which can accept foot traffic. The lid can be easily removed to allow regular maintenance of the internal submersible pump or pumps.

Non-return valve assembly:

To avoid any discharged water backing-up into the sump basin, a non-return valve assembly is provided. This is fitted directly to the submersible pump outlet via flexible couplings and supplied ready to accept a standard 1¼” waste pipe.