Timonox Anti-Graffiti Flame Retardant Glaze

A clear two pack, 100% solids, Anti Graffiti Flame Retardant Glaze, forms part of fire tested systems for use over Timonox Vinyl Matt ONLY, providing an effective non-sacrificial anti-graffiti finish. For internal use only.

For Fire Tested systems refer to Technical Data Sheet for Timonox Anti Graffiti Flame Retardant Glaze.

General information



Uniclass 2015

Pr_35_31_68_29 Flame-retardant coatingsPrimary


M60/175 Protective coating

M60/18 Special coating

Specification data - Flame-retardant coatings

Product Reference

Timonox Anti-Graffiti Flame Retardant Glaze

Standard product features

Number of coats:



Clear finish. NOTE: The glaze may produce a slight change to the chosen Vinyl Matt colour.




  • Pigment: Flame Retardant additives.
  • Binder: Epoxy Silane.
  • Solvent: None.

Drying time:

Under normal drying conditions surface dry in 2 hours. Allow for adequate ventilation during the drying period.

Pot life:

Four hours at 20°C.

Spreading rate (maximum on smooth surfaces):

15 m²/ litre.

Wet film thickness:

67* micrometres at 15 m²/ litre.

Dry film thickness:

67* micrometres at 15 m²/ litre.

*These figures correspond to those quoted on the Fire Test Report and show the minimum film build required.

VOC Content:

EU limit value for this product (cat.A/j): 500 g/L (2010). This product contains maximum 0 g/L VOC.

Third party certifications
  • BS 476 Parts 6 and 7 : Tested at Exova Warringtonfire
Similar products from Crown Trade, product of Crown Paints Ltd