Timesaver Soil Above Ground Drainage System
Verified by manufacturer 2 days ago
Mechanically jointed cast iron soil system to BS 416
Application
Suitable for refurbishment projects:
- Prestigious commercial buildings built in the late 1970s to the late ’90s which are serviced by cast iron soil stacks will most likely be Timesaver or traditional socket and spigot soil systems. If the building is to be refurbished or changes are to be made retaining some of the existing pipework—then Timesaver is the best suited to connect to the original pipework.
- Heritage external soil stacks—traditional appearance sanitary soil pipework installed on the outside of the building.
- Commercial, public and residential buildings.
- Sanitary soil, vent and waste pipes.
- Internal rainwater systems.
Description
The Timesaver soil system, was the first mechanically jointed cast iron system launched in 1973, for use on above-ground soil and waste, vent and rainwater installations serving commercial, public and residential buildings for over 40 years.
Features and benefits:
- Mechanically jointed system manufactured to standard BS 416-2:1990.
- Comprehensive fittings range.
- 50, 75, 100 and 150 mm diameter pipes and fittings.
- 1.8 m (6 ft) double spigot pipes in 75 and 100 mm.
- Two piece ductile iron mechanical couplings.
- Traditional ‘Heritage’ push-fit sockets: 50, 75 and 100 mm.
- Comprehensive fittings range.
- Swept branches in compliance with BS EN 12056-2:2000.
- Access bends and branches.
- Waste connection fittings.
- Push-fit Heritage style couplings, to give a traditional appearance without the need for intrusive caulking of socket and spigot pipework.
- Complete range of pipes and fittings to support alterations and extending Timesaver stacks in commercial buildings.
- Benefits of cast iron:
- A2, S1 Fire rated non-combustible system.
- Excellent acoustic properties.
- Minimal expansion.
- Strong and robust.
- Excellent environmental properties:
- Made from up to 99% recycled content.
- 100% recyclable.
- Long life span.
General information
Color | Black |
Finish | Painted Epoxy |
Material | Cast iron |
Shape | Other |
Length | Bespoke |
Width | Bespoke |
Height | Bespoke |
Uniclass | |
CAWS | R11/31 Cast iron pipework – flexible couplings R11/330 Cast iron pipework – flexible couplings |
Specification data - Cast iron above-ground drainage pipes and fittings
Classification data | |
Standard | To BS 416-2. |
Jointing type | Push-fit couplings. |
Size (nominal) | DN 50. DN 75. DN 100. DN 150. Manufacturer guidanceConsult manufacturer and select components needed as per project requirements. |
Finish | |
External | Black, anti-corrosive acrylic primer paint. Guidance for specification option: Average dry film thickness 40 µm. |
Internal | Two-component ochre-coloured epoxy coating. Guidance for specification option: Average dry film thickness of 130 µm. |
Integral accessories | Not required. Offsets. Air wave vent cowl. Strap on boss. Hole saw arbour with drill. Guidance for specification option: Accessory tools for use with GT133. 64 mm hole saw for cast iron. Guidance for specification option: Accessory tools for use with GT133. Pilot drill. Guidance for specification option: Accessory tools for use with GT133. Bellmouth gully inlet. Grate to suit. Ratchet spanner. 'T' spanner (box). 13 mm deep socket. Timesaver touch up paint. Manufacturer guidanceConsult manufacturer and select components needed as per project requirements. |
Bends | Not required. 87.5° short radius plain bends. 67.5° short radius plain bend. 45° short radius plain bends. 11° short radius plain bend. 87.5° short radius bends with rear access. 45° short radius plain bends with rear access. 87.5° short radius bends with side access. 87.5° long radius bends. 45° long radius bends. 22.5° long radius bends. 5° long radius bends. 87.5° long radius bends with rear access. 87.5° long radius bends with side access. 87.5° long tail bend 250 mm long. 87.5° long tail bend 815 mm long. Manufacturer guidanceConsult manufacturer and select components needed as per project requirements. |
Branches | Not required. 87.5° long tail branch swept radius 915 mm long. 87.5° swept radius branches (equal and unequal). 67.5° plain branch. 45° branches (equal and unequal). 87.5° single branches swept radius with rear access (equal and unequal). 45° single branches with rear access (equal and unequal). 87.5° single branches swept radius with side access - right hand. 87.5° single branches swept radius with side access - left hand. 87.5° double branches swept radius (equal and unequal). 45° double branches. 87.5° double branch swept radius with access. 87.5° corner swept radius branch. 87.5° branch swept radius with 1 x 50 mm BSP boss back. 87.5° branch swept radius with 1 x 50 mm BSP boss back - right hand. 87.5° branch swept radius with 1 x 50 mm BSP boss back - left hand. Parallel branch. Manufacturer guidanceConsult manufacturer and select components needed as per project requirements. |
Brackets | Not required. Wall fixing braket. Manufacturer guidanceConsult manufacturer and select components needed as per project requirements. |
Couplings | Not required. Standard coupling (EPDM gasket). Conversion coupling (EPDM gasket). Manufacturer guidanceConsult manufacturer and select components needed as per project requirements. |
Pipes | Not required. Access pipes with round door. Access pipes with oval door. Access pipes with rectangular door. Taper pipes. Boss pipes with single boss and 50 mm waste compression joints. Boss pipes with single boss and D/T 50 mm BSP. Boss pipes with 2 x 50 mm bosses opposed and 50 mm waste compression joint. Boss pipes with 2 x 50 mm bosses at 90° and 50 mm waste compression joint Boss pipe 240 mm long with 2 x 50 mm bosses in-line and push-fit connection. Manufacturer guidanceConsult manufacturer and select components needed as per project requirements. |
Connector | Not required. Universal connector EPDM. Asphalt roof vent connector. Manufacturer guidanceConsult manufacturer and select components needed as per project requirements. |
End fixings | Not required. Black ends - plain. Black ends with 50 mm push fit connector. Black ends D/T 2" BSP. Manufacturer guidanceConsult manufacturer and select components needed as per project requirements. |
Traps | Not required. 'P' trap plain. 'P' traps with heel access. Guidance for specification option: No support lug. Manufacturer guidanceConsult manufacturer and select components needed as per project requirements. |
Sustainability data
Contains Red List materials | No |
Country of material origin | Europe Guidance for specification option: Pipes manufactured in France Fittings in UK |
Country of product manufacture | Europe Guidance for specification option:
|
Manufacturing plant location | |
Material | Cast iron |
Recyclability | 100% |
Recycled contentAs defined in clause 7.8 of BS EN ISO 14021 | 99 % |
Expected Life | 70 year |
Similar products from Pam Building
Ensign Agilium® Above Ground Drainage System
Timesaver Drain Below Ground Drainage System