Timber Frame Ties - Type 6 - V61
Verified by manufacturer 26 days ago
150 mm long, for 75 mm cavity
150 mm long, for 75 mm cavity
ISO 9001 Quality Management
Certificate type
Type 6 stainless steel masonry-timber tie for domestic and small commercial buildings up to four storeys high. Suitable for buildings with a maximum height if 15 m and cavity widths from 50–100 mm.
Application
Designed to secure an inner timber frame to an outer brick skin
Description
Type 6 stainless steel masonry-timber tie for domestic and small commercial buildings up to four storeys high. Suitable for buildings with a maximum height if 15 m and cavity widths from 50–100 mm.
Features and benefits:
- This type of timber frame wall tie is right for domestic and small commercial builds. They are suitable for flat sites where the basic wind speed is up to 25 m/s and altitude is not greater than 150 m above sea level.
- Designed for timber frame buildings that accommodates vertical movement.
- Manufactured from grade 304 stainless steel.
- Non-combustible (as defined in the national Building Regulations).
- Excellent corrosion resistance and a service life of not less than 60 years.
- In situations where thermal losses through ties need to be taken into account, the products will adequately resist thermal transmittance through a wall cavity
- Tested as Type B (sound) and as Type 6 (strength) to BS EN 845-1.
General information
Color | Silver |
Material | Stainless steel Guidance for specification option: Grade 304. |
Length | 125 mm 150 mm 175 mm |
Uniclass | |
CAWS | F30/220 Wall ties F30/214 Cavity wall ties F30/215 Cavity wall ties used with partial fill insulation F30/24 Cavity wall ties F30/26 Wall ties F30/25 Cavity wall ties used with partial fill insulation |
Specification data - Cavity wall ties
Standard | To BS EN 845-1. |
Tie type | Type 6 (strength) to BS EN 845-1.Guidance for specification option:
|
Material | Grade 304 stainless steel. |
Length | 150 mm. |
End types | Manufacturer's standard.Guidance for specification option: Consult manufacturer for details. |
Design embedment length (minimum) | Manufacturer's standard.Guidance for specification option: Consult manufacturer for details. |
Movement | Manufacturer's standard. |
Additional requirements | |
Mortar joint thickness (minimum) | Manufacturer's standard.Guidance for specification option: Consult manufacturer for details. |
Resistance to water crossing cavity | Resistant (drip feature). |
Slope tolerance | Manufacturer's standard. |
Compressive load capacity | Timber end: 639 N/ 449 N; mortar end: 604 N.Guidance for specification option: Timber end: As received/ 24 mm movement. |
Tensile load capacity | Timber end: 660 N/ 663 N; mortar end: 1466 N.Guidance for specification option: Timber end: As received/ 24 mm movement. |
Dynamic stiffness | Type B. |
Third party accreditation | UKCA marked. |
Fixing | Guidance for specification option: For masonry end; insert requirements. |
Cavity | 75 mm. |
Integral accessories | 50 x 3.35 mm stainless steel annular ring nails. Guidance for specification option: Standard. 50 x 4.0 mm stainless steel screws for SIPS panels. |
Sustainability data
Contains Red List materials | No |
Country of product manufacture | United Kingdom |
Recyclability | Recyclable |
Recycled contentAs defined in clause 7.8 of BS EN ISO 14021 | 0 % |
Third party certifications
ISO 9001 Quality Management
ISO 9001
Literature
Wall Ties Brochure
V61-175-STST Declaration of Performance
V61-150-STST Declaration of Performance
V61-125-STST Declaration of Performance