Three Wall Box Rooflight - Right Exit

Three Wall Box Rooflight - Right Exit

Glazing Vision Ltd Third party certifications:
  • BSI Kitemark

    BSI Kitemark

    Certificate type

  • QA Certificate

    QA Certificate

    Certificate type

Electrically operated glazed box rooflight with one section of glass sliding over a fixed section providing approx 50% opening. Includes dual colour thermally broken framework.

Jump to:
+44 (0)1379 658300 www.glazingvision.co.uk
Description

Sliding rooflight with one single sliding door retracting over fixed glazing available in either a free standing Skybox rooflight or a three wall mounted version. It is a good option for terraced access as it offers a physical structure and the fixed walls of glass provide a balustrade around the opening. It also allows the handrail to continue right up to the point of leaving the box and stepping onto the roof terrace. The box rooflight consists of two sections, one fixed section and one sliding section. The sliding section slides over the fixed section to create a 50% clear opening thus allowing the user to walk through and out of the rooflight. All the glass used is flush to allow water runoff and easy cleaning, whilst maintaining maximum security.

The thermally broken detail on the fixed frame and insulated flashings on the sliding frame almost eliminates direct contact between the warm internal frame and the exterior cold air, reducing heat loss and condensation forming. Carriage design includes large diameter wheels to give minimal rolling resistance on the anodized rails. Includes drainage on the lower track to reduce build up of debris within the framework.

All Glazing Vision sliding rooflights are low-noise in operation and have built in electronic solid-state controls with battery back-up, manual override, speed control and creep-speed sealing at end of travel as standard. Units are factory pre-assembled and tested, usually craned into position, fitted and commissioned within day. Manual override of the unit is via a 90° turn of an Allen key to engage/ disengage the motor from the drive mechanism and allow the product to be pushed open/ closed.

The rooflight is opened electrically, operated by a rocker switch positioned at the discretion of the client. It includes a ‘one touch’ facility, where the switch is pressed and then released leaving the rooflight to open automatically. The unit can be stopped by pressing close once or can be only part opened by keeping the switch pressed until the desired point is reached.

General information

Size

As drawing

As schedule

Color

Grey/white frame, clear glass

Features

Approx 50% clear opening, suitable for regular access, one touch operation

Material

Aluminium, glass

Shape

Box

WarrantyDescription

Manufacturer's warranty

Uniclass 2015

Pr_30_59_72_31 Framed rooflightsPrimary

CAWS

L10/45 Rooflights

L10/460 Rooflights

Specification data - Framed rooflights

Product Reference

GV Standard 3 Wall Box Rooflight

Wall abutted on three sides.

GV Standard Free Standing Box Rooflight

Size

As drawing

As schedule

Colour/ Finish

Qualicoat approved polyester powder-coated, RAL 7015/ RAL 9010

Standard. RAL 7015 slate grey on the exterior; RAL 9010 white on the interior.

Qualicoat approved polyester powder-coated, RAL, special order

Dual colour; consult manufacturer and insert requirements.

Kerb

Insert requirements; consult manufacturer's literature for more information.

Glazing

Double glazed

Triple glazed

Accessories

None

BMS Integration

Enduroshield easy clean glass coating

Gives a non-stick surface making the glass easier to clean and keep clean, stay clean for longer and resist staining and discoloration.

Rain sensor

Rain sensor overrides

Insert requirements.

Remote control

Ritec glass coating

Solenoid bolt

Thermostat

Standard product features

Frame material:

Extruded thermally broken aluminium profiles, grade 6063 T6.

Power supply:

24 V battery operated, 240 V mains supply required for trickle charging batteries via control board.

Drive mechanism:

Rack and pinion.

Polyester powder coat paint finish:

To the Qualicoat standard.

Seals:

Combination of rubber seals and brush strip.

Security:

Anti-lifting mechanism to prevent disengagement of drive mechanism via vertical movement of sliding frame.

Rooflight control:

OR Control Board and magnetic limit switches. With proximity sensors to prevent entrapment.

Visual quality of glass:

To the Hadamar standard.

Product Options

Glazing:

- Double glazed:

  • Outer: 6 mm clear toughened heat soak tested.
  • Spacer: 18 mm black silicone sealed argon filled cavity.
  • Inner: 8.8 mm heat strengthened PVB laminated soft coat low E (1.1).

- Triple glazed:

  • Outer: 6 mm clear toughened heat soak tested.
  • Spacer: 14 mm black silicone sealed argon filled cavity.
  • Middle: 4 mm clear soft low E toughened heat soak tested.
  • Spacer: 14 mm black silicone sealed argon filled cavity.
  • Inner: 8.8 mm heat strengthened PVB laminated soft coat low E (1.1).

Digital objects
Platform Compatible Version Certified to
IFC

IFC2X3

1

1.3
IFC

IFC2X3

1

1.3
Revit

Revit 2016

2

2.0
Download now from NBS National BIM Library
Third party certifications
  • ISO 9001 : Compliant company
  • ISO 14001 : Compliant company
  • National Association of Rooflight Manufacturers (NARM) : Members
  • Qualicoat: To EN 12206-1 : Approved Applicator
Similar products from Glazing Vision Ltd