Verified by manufacturer 10 days ago
Superwall 36 Cavity Batt - 50 mm
ISO 14001 Environmental Management Systems
Certificate type
EPD
Certificate type
ISO 9001 Quality Management
Certificate type
BBA Agrément Certificate
Certificate type
UK Conformity Assessed (UKCA)
Certificate type
CE Marking
Certificate type
Made in Britain
Certificate type
BS EN 13501-1
Certificate type
DoP
Certificate type
Superglass Superwall 36 is a British Board of Agrément (BBA) approved, non-combustible glass mineral wool insulation cavity wall batt.
Superglass Superwall 36 is designed to provide thermal insulation in full or partial fill in new external masonry cavity walls, up to 25 metres in height for full fill and without restriction for partial fill in buildings of a domestic and non-domestic nature. Additional requirements apply for buildings above 12 metres in height for full fill and above 25 metres in height for partial fill, please refer to the product BBA certificate for more information.
Superwall 36 is BBA approved for use in all UK exposure zones (subject to conditions detailed in the BBA Certificate)
Superglass Superwall 36 is a British Board of Agrément (BBA) approved, non-combustible glass mineral wool insulation cavity wall batt, manufactured with a water-repellent additive to resist moisture ingress. The flexible batt is supplied at 455mm wide to allow easy installation between standard vertical wall tie spacings, reducing the need for on-site cutting and waste..
Thermal Conductivity:
Declared thermal conductivity (lambda (λ) value) of 0.036W/mK.
Fire Classification:
Deemed non-combustible with a fire classification of Euroclass A1 (the highest possible rating) when tested to BS EN 13501-1 Reaction to Fire.
Vapour Resistivity
The product has a nominal vapour resistivity of 5 MN·s/g·m.
Environmental credentials.
Standards and Approvals.
Certification:
Below DPC level.
The product may be used in situations where it bridges the DPC in
walls; dampness from the ground will not pass through to the inner leaf provided the wall is detailed in accordance with the requirements and provisions of the national Building Regulations.
Water Resistance
Constructions incorporating the product and built in accordance with the Standards listed in section 4.4 of BBA Certificate 89/2231 Product Sheet 2, will resist the transfer of precipitation to the inner leaf and satisfy the national Building Regulations.
Color | Yellow |
Material | Glass mineral wool Glass Fibre |
Shape | Rectangle |
Length | 1200 mm |
Width | 455 mm |
Height | 50 mm 75 mm 85 mm 90 mm 100 mm |
Uniclass | |
CAWS | F30/10 Full fill cavity insulation F30/12 Partial fill cavity insulation F30/150 Full fill cavity insulation F30/155 Partial fill cavity insulation |
Product range |
Standard | To BS EN 13162.Guidance for specification option: Manufactured in accordance with BS EN 13162:2012(+A1:2015) Thermal insulation products for buildings. Factory made mineral wool (MW) products. BS EN 13172:2012 Thermal insulation products. Evaluation of conformity BS EN ISO 9001:2015 Quality Management Systems (QMS). Water resistance construction incorporating the product and built in accordance with the Standards listed in section 4.4 of BBA Certificate 89/2231 Product Sheet 3, will resist the transfer of precipitation to the inner leaf and satisfy the national Building Regulations. |
Thickness | 50 mm. |
Thermal conductivity (maximum) | 0.036 W/m·K. |
Fire performance | Reaction to fire classification of A1, as defined in BS EN 13501-1.Guidance for specification option: All Superglass products are deemed non-combustible and have a fire classification of A1 when tested to BS EN 13501-1 reaction to fire. |
Recycled content | Up to 84%.Guidance for specification option: Recycled content: Manufactured from up to 84% recycled glass which would otherwise go to landfill. |
R-Value | 1.35 m²K/W. |
Length | 1200 mm. |
Width (nominal) | 455 mm. Guidance for specification option: Length: 1200 mm. |
Form | Glass mineral wool batt. |
Contains Red List materials | No |
Country of material origin | United Kingdom |
Country of product manufacture | United Kingdom |
Material | Glass mineral wool Glass Fibre |
Manufacturing plant location | |
Embodied carbonA1-A3 (production stage) as defined in BS EN 15804 | 1.35 kg CO₂ eq/kg Manufacturer guidancePlease see product EPD. |
Recycled contentAs defined in clause 7.8 of BS EN ISO 14021 | 84 % Guidance for specification option: Manufactured from up to 84% recycled glass which would otherwise go to landfill. |
Platform | Compatible | Version |
---|---|---|
![]() | - | 1 |
ISO 14001 Environmental Management Systems
Environmental Management System ISO 14001: 2015
EPD
Environmental Product Declaration (EPD) – Cured Glass Mineral Wool Insulation
ISO 9001 Quality Management
Quality Management System ISO 9001:2015
BBA Agrément Certificate
SUPERWALL 36 DUAL PURPOSE CAVITY WALL BATT CERTIFICATE 89/2231
UK Conformity Assessed (UKCA)
UKCA Certificate - Cured Glass Mineral Wool Insulation
CE Marking
CE Certificate - Cured Glass Mineral Wool Insulation
Made in Britain
Made in Britain
BS EN 13501-1
Euroclass A1 Reaction to Fire Classification
DoP
Declaration of Performance (DoP) - Superwall 36 Cavity Batt - UKCA