Superglass Superwall 36 Cavity Wall Batt

Third party certifications:

BBA Agrément Certificate
Certificate type
QA Certificate
Certificate type

Cavity wall insulation batts.

Jump to:

Application

Designed to provide thermal insulation in full or partial fill in new external masonry cavity walls, up to 25 m in height for full fill and without restriction for partial fill, in new buildings of a domestic and non-domestic nature (additional requirements apply for buildings above 12 m in height for full fill and above 25 m in height for partial fill). It is BBA approved for use in all UK exposure zones (subject to conditions detailed in the BBA Certificate and NHBC Standards).

Description

A British Board of Agrément (BBA) approved, non-combustible and water repellent glass mineral wool insulation cavity wall batt. The flexible batt is supplied at 455 mm wide to allow easy installation between standard vertical wall tie spacings and minimum on-site cutting and waste.

Features and benefits:

Thermal performance: Provides excellent thermal performance with a thermal conductivity of 0.036 W/mK.

Fire performance: Classified as A1 non-combustible.

Recycled content: Manufactured from up to 84% recycled glass.

Environmental: BRE Green Guide Rating of A+ and ISO 14001 accredited.

Easy to fit: Simple installation between standard wall tie spacings.

CE marked.

Applications:

General information

Uniclass 2015	Pr_25_57_06_53 Mineral wool insulationPrimary
CAWS	F30/10 Full fill cavity insulation F30/12 Partial fill cavity insulation F30/150 Full fill cavity insulation F30/155 Partial fill cavity insulation

Specification data - Mineral wool insulation

Product Reference

Superwall 36 Cavity Wall Batt, 50 mm thick

R-value: 1.35 m²K/W.

Superwall 36 Cavity Wall Batt, 75 mm thick

R-value: 2.05 m²K/W.

Superwall 36 Cavity Wall Batt, 85 mm thick

R-value: 2.35 m²K/W.

Superwall 36 Cavity Wall Batt, 100 mm thick

R-value: 2.75 m²K/W.

Superwall 36 Cavity Wall Batt, 125 mm thick

R-value: 3.45 m²K/W.

Superwall 36 Cavity Wall Batt, 150 mm thick

R-value: 4.15 m²K/W.

Standard product features

Length:

1200 mm.

Width:

455 mm.

Technical characteristics:

Thermal performance: Declared thermal conductivity of 0.036 W/mK.

Fire performance: All Superglass products are deemed non-combustible and have a fire classification of A1 when tested to BS EN 13501-1 Reaction to Fire.

Environment: manufactured in accordance with ISO 14001:2015 Environmental Management Systems. Zero Ozone Depletion Potential and zero Global Warming Potential. Chlorofluorocarbons (CFCs) and hydrochlorofluorocarbons (HCFCs) free.

Generic BRE Green Guide Rating of A+.

Recycled content: Manufactured from up to 84% recycled glass which would otherwise go to landfill.

Durability: Non-hygroscopic, will not rot, degrade or sustain vermin and will not encourage the growth of mould, bacteria or fungi.

Vapour resistance: Negligible vapour resistance, allowing vapour to pass freely through the insulation.

Standards:

Manufactured in accordance with BS EN 13162:2012(+A1:2015) Thermal insulation products for buildings. Factory made mineral wool (MW) products. BS EN 13172:2012 Thermal insulation products. Evaluation of conformity BS EN ISO 9001:2015 Quality Management Systems (QMS).

Water resistance construction incorporating the product and built in accordance with the Standards listed in section 4.4 of BBA Certificate 89/2231 Product Sheet 3, will resist the transfer of precipitation to the inner leaf and satisfy the national Building Regulations.