Sun Tunnel for Rubber Roof - Rooflights, Daylight Pipes
Verified by manufacturer 15 days ago
300 mm (12")
300 mm (12")
ISO 9001 Quality Management
Certificate type
Daylight pipe/sun tunnel kit to provide natural light into buildings, for use on flat EPDM rubber roofs.
Application
Flat Roof Light Tunnel for EPDM Rubber Roofs are designed specifically for spaces where standard roof windows cannot be installed and are a good option to bring natural daylight into a property; whether this is commercial or residential.
Description
Natural daylight Flat Roof Light Tunnel for EPDM Rubber Roofs which directs sunlight into a room from roof level. The sunpipe collects daylight using a patented Diamond dome, using a silverized PVD coated mirror-finished aluminium tube to transfer light to a room, with a ceiling diffuser evenly distributing the light around the room. Sunpipes are suited to almost any application and have been installed anywhere from residential bedrooms to the Olympic Handball Arena in London.
The Flat EPDM Rubber Roof Kit comprises a patented composite EPDM flashing plate which is fully watertight and is designed to meet firestone's strict procedures for installation.
Components:
- Acrylic diamond dome.
- Galvanized flashing plate (0.8 mm). Corrosion resistant, and can be fitted to felt, membrane and asphalt roof finishes.
- Acrylonitrile-butadiene styrene (ABS) collar (for the dome to fit onto).
- Plain end pipe (610 mm, 0.5 mm-thick). Coated with MIRO SILVER® 27/427OAG.
- Plywood backing plate (4 mm). Helps to mark out the opening at ceiling level and provides additional structural fixing for the diffuser.
- Ceiling extension (250 mm, 0.5 mm-thick). Provides a permanent joint between the diffuser and end pipe. Coated with MIRO SILVER® 27/427OAG.
- Double-glazed MicroPrism ceiling diffuser. Offers high thermal performance whilst ensuring maximum spread of natural daylight. White finish.
General information
Color | White |
Finish | Mirrored |
Material | Aluminium Acrylic |
Shape | Circle |
Warranty description | Ten year |
Uniclass | |
CAWS | L10/48 Daylight pipe L10/495 Daylight pipe |
Specification data - Daylight pipes
Material | Aluminium and acrylic.Manufacturer guidanceAnodized aluminium tube. Acrylic diamond dome. |
Internal finish | Micro silver 27/427OAG. |
Diameter | 305 mm. |
Accessories | None.30° Adjustable Elbow.Guidance for specification option: Used where a small offset is required. 45° Adjustable Elbow.Guidance for specification option: Used where a large offset is required. 610 mm extension lengthwith crimped end. |
Pipe extensions | Not required. Guidance for specification option: If pipe length is not required to be longer than 600 mm. One. Guidance for specification option: For pipe lengths up to 1200 mm. Two. Guidance for specification option: For pipe lengths of 1200–1800 mm. Three. Guidance for specification option: For pipe lengths of 1800–2400 mm. Four. Guidance for specification option: For pipe lengths of 2400–3000 mm. |
Pipe sizes | 300 mm. |
Opening | 320 mm. Manufacturer guidanceRequires a ceiling/ roof opening. |
Sustainability data
Contains Red List materials | No |
Country of material origin | United Kingdom |
Country of product manufacture | United Kingdom |
Material | Aluminium Acrylic |
Third party certifications
ISO 9001 Quality Management
Monodraught ISO 9001
Literature
Flat Rubber Roof Install Instructions