Styccobond F84

STYCCOBOND F84 is a two-part reactive epoxy adhesive designed for installing a wide range of sheet floorcoverings onto STOPGAP ISOLATOR MEMBRANE and other suitable substrates. It is ideal for use in areas that are subject to surface water and areas that are heavily trafficked. When cured the adhesive is resistant to water, oil and grease. Although it is suitable for outdoor use it is not intended to be used as, or a substitute for a waterproof surface membrane.

STYCCOBOND F84 can be used for securing a wide range of vinyl and rubber floorcoverings, sheet linoleum and textile floorcoverings.

Refer to the F. Ball Recommended Adhesives Guide for details of specific floorcoverings.

STYCCOBOND F84 can be applied to STOPGAP smoothing underlayments, Isolator Membrane, structurally sound, smooth, dry subfloors of concrete and sand/cement screed, plywood, flooring grade chipboard, hardboard and bright steel.

STOPGAP waterproof surface membranes, sound flooring grade asphalt and other non-absorbent surfaces must be skimmed with a minimum of 3mm of the appropriate STOPGAP smoothing underlayment.

When used in conjunction with STOPGAP ISOLATOR MEMBRANE, please refer to the technical data sheet for detailed guidance.

For details on other subfloors, contact our Technical Service Department

Proper subfloor preparation is essential for the correct installation of any floor covering. Subfloors must be structurally sound, smooth, dry (<75% RH)* and free from laitance and any contaminants which will affect adhesion. Use STYCCOCLEAN C140 for removing grease, oil, polish, soap etc. from non-absorbent substrates.

* Except when Isolator Membrane is to be used.

Concrete and sand/cement screeds must be fully cured and any laitance or surface treatments must be removed. Steel must be bright and free from any contaminants which may affect adhesion. The temperature of the floor must be maintained above10°C throughout the application and drying of the adhesive. Underfloor heating must be off for at least 48 hours before, during and after application.

For detailed information, request the F. Ball Subfloor Preparation Guide.

General information


Light beige

Uniclass 2015

Pr_20_31_02_26 Epoxy resin-based adhesivesPrimary


M50/10 Resilient floor tiling

M50/150 Sheeting

M50/155 PVC sheet flooring in special wet areas

M50/170 Carpeting

M50/20 Sheeting

M50/25 Carpeting

Specification data - Epoxy resin-based adhesives

Product Reference

Styccobond F84

Product Options

Technical properties:

  • Colour - Light beige.
  • Consistency - Creamy
  • Coverage Rates - 3m2 per kg using a 1.5mm x 5mm trowel or 2m2 per kg using a 2mm x 6mm trowel
  • Open Time - 20 minutes

Digital objects
Platform Compatible Version Certified to

Revit 2017




Download now from NBS National BIM Library
Similar products from Ball, F and Co Ltd