STYCCOBOND B90 is a PVA emulsion adhesive for jointing wood, block board, chipboard and tongue and groove wood flooring. It conforms to Durability class D3of EN204.

It can also be used for bonding the headers of solid wood flooring and engineered boards (semi-solids).

STYCCOBOND B90 dries to a colourless transparent film and is protected against bio-degradation. .

Joint surfaces should be sound, dry, dust free and free from contamination. Apply evenly to one surface only. Assemble the bond whilst the adhesive is still wet and apply pressure by clamping or weighting to maintain a tight joint until the adhesive has dried, at least 24 hours depending on temperature and absorbency of the surfaces.

The temperature should be maintained above 10°C during application

General information

Uniclass 2015

Pr_35_31_66_83 Solvent-borne wood primersPrimary


M42/10 Wood flooring

M42/110 Wood block flooring

M42/120 Mosaic parquet panel flooring

M42/150 Composition block flooring

M42/20 Composition block flooring

Specification data - Solvent-borne wood primers

Product Reference

Styccobond B90

Product Options

Technical properties:

  • Colour - White.
  • Coverage Rates - 200 linear metres of 3mm bead per litre
  • Open time - Up to 10 minutes
  • Drying time - 24 hours