Verified by manufacturer 2 months ago
Polymer modified priming slurry.
Suitable for improving bond to natural stone flags, cobbles and setts, clay, and concrete pavers in a rigid construction.
To achieve a bond strength as described in BS 7533, the substrate must be primed using Priming Slurry prior to placing High-Strength Bedding Concrete.
All paving units must be all paving units should be pre-soaked and primed with Priming Slurry promptly prior to placing into High-Strength Bedding Concrete. Priming Slurry can be applied by a stiff brush at a thickness of 1 - 2mm.
When priming the base, the priming slurry should be fresh and wet when the High-Strength Bedding Mortar is applied. When priming paving slabs, this should take place promptly prior to their placement on the Streetscape® High-Strength Bedding Mortar laying course.
Independent third-party testing carried out by RSK STATS Ltd. Available in 20kg premixed bags.
SMET carries a wide range of Streetscape® High Strength Bedding Concrete, Priming Slurry, Rapid Set Jointing Mortar, Streetscape® Grouts, Cleaners, and Sealants for convenient application and compliance to BS 7533.
A superior quality polymer modified Priming Slurry, manufactured under an ISO 9001 quality controlled environment using dried sands, lime, cement, and additives specially designed to increase the adhesion of ‘Streetscape® High-Strength Bedding Mortar’, to achieve the requirements of BS 7533 part 7:2010.
The product is used for improving bond to natural stone flags, cobbles and setts, and clay and concrete pavers in a rigid construction.
Featured Benefits of Streetscape® Priming Slurry:
• Convenient and user-friendly
• High Bond Strengths
• Consistently high-quality mix
• Eliminates inaccurate site mixing
• Complies with BS 7533
• Improves adhesive strength of paving
• Eliminates wastage
• Promotes cleaner and safer sites
Color | Grey |
Material | Lime |
Material | Lime |
Uniclass | |
CAWS | Q25/435 Primer for underside of flags and slabs |
Product range |
Adhesion strength | >2 N/mm². Manufacturer guidance(28 days) (BS EN 1015-12) |
Thickness | 1–2 mm. |
Use | Internal and external. |
Typical yield | Approximately 1.2kg/mm/m² (1 bag = approximately 17 m³ - single coat and 9 m² based on two priming coats, i.e. base and paving unit). Manufacturer guidance(per 20kg bag) |
WaterContent | 26–28%. Manufacturer guidanceRecommend water content |
Mix | 20 kg bag to approximately 5.0 - 5.4 litres of clean water and mix for 3 - 4 minutes, using a suitable bell mixer. |
Contains Red List materials | No |
Country of material origin | Ireland |
Country of product manufacture | Ireland |
Material | Lime |
Manufacturing plant location |
NBS BIM Object Standard
This BIM object has been authored to meet the requirements of the NBS BIM Object Standard.
Find out more about the NBS BIM Object Standard.
Platform | Compatible | Version |
---|---|---|
![]() | - | 1 |
![]() | Revit 2016 | 6 |
![]() | - | 1 |
![]() | IFC2X3 | 5 |
![]() | - | 1 |
Streetscape® High Strength Bedding Concrete | Lockerbie Town Centre Public Realm | 2,500 m2
Streetscape® High Strength Bedding Concrete | supplied to Vinci Construction UK | £350million Stoke-on-Trent Bus Station | SMET Case Studies
Streetscape® High Strength Bedding Concrete | The Helix Park, Falkirk, Scotland | | SMET Case Studies