Application

Recommended for use over non-absorbent surfaces such as ceramic tiles, treated power floated concrete and Stopgap waterproof surface membranes. Stopgap P141 is also recommended prior to the application of Stopgap 600 over non-absorbent surfaces when applied at thicknesses greater than 20 mm.

It is suitable for use over normal underfloor heating and is pigmented yellow for visual control of coverage uniformity.

Description

An acrylic primer designed to promote adhesion and application characteristics of Stopgap levelling compounds to non-absorbent subfloors. Stopgap P141 contains recycled PVC-U pulver that dries to a hard, textured surface to enhance bond performance.

Preparation:

Floor surfaces must be suitably prepared: sound, smooth, dry (<75% RH) and free from contaminants that may prevent adhesion. The temperature of the floor must be a minimum of 50°C when the primer is applied to the subfloor and underfloor heating must be off for at least 48 hours before, during and after application. Ensure the subfloor is dry and incorporates an effective damp proof membrane.

Features and benefits:

  • Textured finish.
  • Fast drying.
  • Pigmented to provide coverage control.
  • Suitable for use with F. Ball marine applications.

Application:

Recommended for use over non-absorbent surfaces such as ceramic tiles, treated power floated concrete and Stopgap waterproof surface membranes. Stopgap P141 is also recommended prior to the application of Stopgap 600 over non-absorbent surfaces when applied at thicknesses greater than 20 mm.

It is suitable for use over normal underfloor heating and is pigmented yellow for visual control of coverage uniformity.

General information

Material

[Material, Acrylic]

-

Uniclass 2015

Pr_35_31_66_09 Bonding coatsPrimary

CAWS

M10/160 Proprietary self smoothing levelling screeds

M10/7 Proprietary quick drying levelling screeds

M42/150 Composition block flooring

M42/20 Composition block flooring

M42/30 Concrete/ Screed substrates

M50/10 Resilient floor tiling

M50/110 Resilient floor tiling

M50/130 Carpet tiling

M50/15 Carpet tiling

M50/150 Sheeting

M50/155 PVC sheet flooring in special wet areas

M50/170 Carpeting

M50/20 Sheeting

M50/25 Carpeting

M50/45 Existing floor covering removed

M50/460 Smoothing/ levelling underlayment compound

M51/110 Carpeting

Specification data - Bonding coats

Product Reference

Stopgap P141

Product Options

Colour:

Yellow.

Material:

Acrylic.

Coverage:

13 m²/L.

Drying time:

From 15 minutes at 200°C.

Similar products from Ball, F and Co Ltd