Sto Rend Flex Cote System
A render system for application onto masonry substrates comprising levelling coat, cement free reinforcing coat and glass fibre reinforcing mesh, suitable to accept a wide range of low maintenance facade finishes offering exceptional levels of weather protection.
The StoRend Flex Cote system offers approximately 15 times the crack resistance compared to traditional renders and can be finished with a range of Sto render finishes, StoBrick, Sto-Resin Brick Slips, Sto-Ecoshapes or enhanced with StoDeco Profiles or StoDeco Rustications. Sto through coloured render finishes are available in a variety of textures and grain sizes, and up to 1100 colours from the StoColor system and StoDesign Architectural Colour Range.
Uniclass 2015 | |
CAWS | M20/160 Proprietary cement gauged render M20/19 Proprietary render |
Product Reference | StoRend Flex Cote |
Substrate | - |
Type | Common or facing brickworkConcreteConcrete blockworkStone |
Substrate preparation | StoPrim FungalDisinfectant for treatment of algae/ fungal growth. StoPrim MicroDeep penetrating, adhesion promoting, surface consolidating, absorption regulating primer typically suited to application in large areas. StoPlex WAdhesion promoting, surface consolidating, absorption regulating primer suited to application in small to medium areas. StoPrep ContactBonding bridge for use on surfaces that are smooth and/ or of very low absorption. |
Levelling coat | - |
Type | StoLevell CoteMinimum thickness 6 mm, maximum thickness 12 mm per coat. Multiple coats are possible. StoMiral FL VarioAlternative for aerated concrete blockwork. Minimum thickness 8 mm, maximum thickness 12 mm per coat. Multiple coats are possible. |
Number of coats | OneTwo |
Overall thickness | See 'Options' below and insert requirements. |
Reinforcing coat | StoArmat Classic Plus cement-free reinforcing render |
Reinforcing mesh | Sto Glass Fibre MeshReinforcing mesh. |
Decorative finish render: | - |
Type | Stolit EffectAcrylic resin bound render finish used to achieve special render effects. Stolit KAcrylic resin bound render with stippled texture. Stolit MilanoAcrylic resin bound render finish with fine grain used either alone or with Stolit K/ Stolit Effect to achieve special render effects. Stolit MPAcrylic resin bound render with rustic texture. Stolit RAcrylic resin bound render with rilled texture. StoLotusan KSuper-hydrophobic render finish with stippled texture and Lotus Effect. StoLotusan MPSuper-hydrophobic render finish with rustic texture and Lotus Effect. StoSilco KSilicone resin bound hydrophobic render with stippled texture. StoSilco MPSilicone resin bound hydrophobic render with rustic texture. StoSilco RSilicone resin bound hydrophobic render with rilled texture. StoSuperlit KAcrylic bound render finish with exposed natural stone aggregate. |
Colour/ Aggregate | See 'Options' and insert requirement. |
Accessories | NoneSto-Bellcast Bead PVC-USto-Stop Bead PVC-USto-Movement Joint Bead PVC-USto-PVC Mesh Angle BeadFor reinforcing 90° external angles. Sto-Mesh Angle Flexibead IdealFor reinforcing external angles. Sto-Armour AngleFor reinforcing internal angles. Sto-Seal Bead StandardCombined render stop bead and reinforcing mesh for use at head/ reveal interfaces. |
Product Options | Substrate: - Preparation:
Levelling coat: - Type/ Overall thickness:
Reinforcing coat: StoArmat Classic Plus cement free, water based, fibre reinforced, highly flexible acrylic mesh coat. Minimum thickness: 3.0 mm; thickness to be such as to ensure the reinforcing mesh is fully embedded. Decorative finish render: Render finishes are available in a range of up to 800 colours from the StoColor System and a further 300 colours from the Sto Architectural colours range. Other finishes: StoBrick clay brick slips, Sto Resin Brick Slips, Sto-EcoShapes, StoDeco Profiles, StoDeco Rustications, plus other options may be used as an alternative to or in conjunction with render finishes - consult manufacturer for details. - Colour/ Aggregate: Refer to StoColor system and Sto Architectural colour range for colours. Consult manufacturer for details and samples.
|