Verified by manufacturer 5 months ago
Cold rolled steel frame system (SFS), giving a structurally robust and dimensionally stable warm spaced wall construction.
Can be used with the majority of external finishes, across most applications. It is compatible with reinforced concrete and hot rolled steel frames, and traditional, pre-cast concrete and tensioned slab designs. It suits infill, oversail and loadbearing systems:
Infill between structural slabs and steelwork. Normally offset 20 mm from the edge of the structure.
Installed outside the line of the structural frame using specially designed support cleats and brackets. Particularly suitable to projects where the façade treatment needs to have movement joints reduced or removed or where internal floor area needs to be maximised.
Most commonly used for extensions of old or existing buildings.
The cold rolled SFS offers a structurally robust and dimensionally stable warm spaced wall construction that can be used with most external finishes.
This component supply structural stud and track system, is available to suit infill, oversail and loadbearing systems that provide early weather protection capability to the building.
Features and benefits:
G10/30 Cold-formed galvanized steel
G10/170 Cold-formed galvanized steel
'U' section standard track.
Used as head/ base track in wall frames of edge trimmers on floor/ roof frames.
'U' section slotted track.
Used as head track in infill wall frames.
'C' section stud.
Used as studs in wall frames and joists in floor/ roof frames.
Standard: To BS EN 10346:2015.
Deflection head bracket.
Used to restrain the head of a 'C' section stud into the head track within infill frames where the slotted head track is not used.
Used as bracing straps on panels or as bracing to some lintel constructions.
Used at the head or base of panels where the frame sits partially outside the line of the structure.
Angle - equal legged.
Used for general building works and connections from lintels and cills to jambs.
Angle - unequal legged.
Used for general building works and support to sheathing boards.
Standard and special bracket.
Used to connect oversail frames to the main structure or at the head and base of jambs of infill frames to strengthen the connection to the structure.
To BS EN 10346.
Typically comprises of a series of frames that infill between structural slabs and steelwork.
Installed outside the line of the structural frame using specially designed support cleats and brackets at each floor level.
A total building frame supplied in component form for erection on site.
Special bracketry and alternative uses for standard components can be used to achieve a building line as required. Consult manufacturer and insert requirements.
All fixings are recommendations. All connections from the frame to any interfacing structure or material must be checked for suitability and design. Contact manufacturer.
Low profile HWH Ø5.5 x 19 mm self drilling screw - LP19-HEX.
HWH Ø5.5 x 25 mm self drilling screw - LS25.
Pan head Ø5.5 x 38 mm self drilling screw - CFHS38.
HWH Ø5.5 x 38 mm self drilling screw - HS38.
HWH Ø6.3 x 32 mm masonry anchor - MF32.
Grade 8.8 BZP bolt locking nut washer.
Fischer high performance sleeve anchors (hex head) - FH II-S.
Fischer high performance sleeve anchors (C/SK head) - FH II-SK.
Country of material origin
Country of product manufacture
A1-A3 (production stage) as defined in BS EN 15804
4.21 kg CO₂ eq/kg
recyclable from the point of demolition.
NBS BIM object standard
This BIM object has been authored to meet the requirements of the NBS BIM object standard.
Find out more about the NBS BIM object standard.