NBS Source
I'm a manufacturer
Compare variants

Application

Solid brass stair rods with turned finials or ends are cut to the required sizes then machine-turned with choice of finial. These stair rods are supplied with two matching hinged fixing eyes per stair rod and designed to be fitted as a decorative finish to any stairs in both commercial and domestic applications.

Description

Stair Rods are made to customer supplied sizes and are hand lathe-turned prior to polishing and finishing. Rods over three metres in length are made in more than one piece with a joining detail. A range of diameters are available, plus 22 mm faced triangular rods.


Features and benefits:

  • A choice of finials are available on all rods (note that not all finials are available on all rods).
  •  All rods are supplied with two hinged fixing eyes per rod.
  • Plain fixing eyes may be available to suit 12.5 mm diameter rods upon special request. 
  • Supplied in sizes to suit rod diameters or triangular.

General information

Color

Bronze

Guidance for specification option:

Antique Bronze

Finish

Chrome

Guidance for specification option:

Chrome and Satin Chrome.

Brass

Guidance for specification option:

Polished Brass, Satin Brass, Antique Brass.

Antiqued

Material

Brass

Guidance for specification option:

Grade H/H CZ108 BS EN 12164:2016.

Shape

Circle

Length

Bespoke

Guidance for specification option:

Cut to customer sizes.

Uniclass

Pr_35_90_31_84 Stair trimsPrimary

CAWS

N91/415 Brass

N14/330 Brass

M50/75 Stair nosings and trims

M50/750 Stair nosings and trims

Specification data - Stair trims

Material

Solid Brass.

Colour

Polished brass.

Satin brass.

Antique brass.

Antique bronze.

Chrome.

Satin chrome.

Nickel.

Satin nickel.

Manufacturer guidance

Please refer to the C.A.T. product catalogue for details of which finishes are available on which diameter of rods/triangular rods.

Diameter

10 mm.

12.5 mm.

16 mm.

19 mm.

Fixing

Hinged fixing eyes / mechanical.

Standards

To BS EN 12164:2016.

Handling

Use gloves when handling.

Guidance for specification option:

Do not handle with bare hands are sweat will cause rapid tarnishing of the finish.

Installation

-

Manufacturer guidance

  • Fix eyes into tread riser directly alongside the edge of the carpet runner leaving a gap of approximately 3mm (1/8").
  • For concrete stairs use rawl plugs for screw fixings.
  • When fixing to timber stair, direct screw into tread and riser. Note, if wood is particularly hard, it may be required to pilot drill before fixing with screws.
  • Stair rods are for aesthetic purposes only. Always use wooden gripper to fully secure carpet on stairs.

Dimensions

22 x 22 x 22 mm.

Manufacturer guidance

Triangular rod dimensions.

Sustainability data

Country of material origin

Europe

Country of product manufacture

United Kingdom

Material

Brass

Guidance for specification option:

Grade H/H CZ108 BS EN 12164:2016.

Recyclability

100% recyclable at suitable disposal centres

Recycled content

As defined in clause 7.8 of BS EN ISO 14021

100 %

Literature

10mm STAIR RODS TDS

10mm STAIR RODS TDS

12mm STAIR RODS TDS

12mm STAIR RODS TDS

16mm STAIR RODS TDS

16mm STAIR RODS TDS

19mm STAIR RODS TDS

19mm STAIR RODS TDS

Case studies

The Royal Opera House

The Royal Opera House

Heythrop Park

Heythrop Park

Similar products from CAT (Carpet Accessory Trims) Limited

Aluminium LVT Stair Edge Profiles

Aluminium LVT Stair Edge Profiles

Brass LVT Stair Edge Profiles

Brass LVT Stair Edge Profiles

Flat Plate Inserts

Flat Plate Inserts

Stringer Trims - Aluminium, Brass and uPVC Stair Trim

Stringer Trims - Aluminium, Brass and uPVC Stair Trim